Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ternary alloy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Development of High Bs Fe-Ni Based Metal Amorphous Nanocomposite by Optimization of Glass Forming Ability

A growing interest in electric vehicles challenges soft magnetic materials to improve efficiency and power density. Metal amorphous nanocomposites (MANCs) have lower coercivities and eddy current losses, allowing for greater efficiency and higher switching frequency. The later allows for high motor speeds and improved power density. However, commercially available and laboratory demonstrated MANCs have shortcomings. Fe-based MANCs, such as FINEMET have excellent magnetic properties, but mechanical properties limit their application in high speed electric motors (HSMs). Fe-Co based MANCs, such as HITPERM, have high saturation inductions and good mechanical properties, but elevated magnetostrictive losses. Co-based MANCs and more recent Fe-Ni based MANCs have low losses and good mechanical properties, but lower saturation inductions (1-1.2 T), that limit power density in HSMs. Recently, much work has explored improving saturation induction in MANCs by increasing the content of magnetic elements, which comes at the cost of glass-forming ability (GFA). These efforts where generally limited to trial and error testing. Additionally, all work to date has focused on Fe-based alloys. In this work, a method of using Thermocalc simulation to locate near-eutectic compositions has been applied to Fe-Ni based alloys. Minima in liquidus temperature and solidification range were found for a ternary composition range and used to identify compositions that retain good GFA as the percentage of magnetic elements is increased. The (Fe 70 Ni 30 ) x (B-Si-Nb) 100-x alloy system for x=82% and x=85% was explored by Thermocalc simulations. This is an increase in magnetic element content compared to previously developed x=80% alloys. 3 compositions in the x=82% system, and 1 alloy in the x=85% system where identified and successfully cast as amorphous ribbon. The amorphous nature of the ribbon was confirmed by a bend test and XRD. Magnetic testing was performed by PPMS to measure saturation induction and Curie temperature of the amorphous material. The Curie temperatures increased to 407-438 °C for the x=82% alloys, and 462 °C for the x=85% alloy. Saturation induction increased to 1.28-1.36 T for the x=82% alloy and 1.48 T for the x=85% alloy, which is a significant improvement over the ~370 °C Curie temperature and 1.2 T saturation of previous Fe-Ni alloy. Crystallization behavior was studied by XRD for the x=85% alloy, showing that crystallization process follows a 2-step process of Amorphous → BCC+FCC+Amorphous → BCC+FCC+Fe 3 B+Fe 23 B 6 . Post annealing magnetic properties were studied by strip testing, and saturation induction as high as 1.48 T was seen after optimal annealing. TEM was used to study structure of as cast and annealed material. 2 alloys with x=82% compositions were identified with an optimal crystalline size of 10-20 nm, while the x=85% alloy had this structure in the as cast state. This opens the possibility of using the alloy in the as cast state, without requiring annealing. In conclusion, alloys with good GFA and improved magnetic properties were identified by Thermocalc simulation.

Krimer, Yuval↗
DOE OSTI2021

Prediction of crystal structures and motifs in the Fe–Mg–O system at Earth’s core pressures

Abstract Fe, Mg, and O are among the most abundant elements in terrestrial planets. While the behavior of the Fe–O, Mg–O, and Fe–Mg binary systems under pressure have been investigated, there are still very few studies of the Fe–Mg–O ternary system at relevant Earth’s core and super-Earth’s mantle pressures. Here, we use the adaptive genetic algorithm (AGA) to study ternary Fe x Mg y O z phases in a wide range of stoichiometries at 200 GPa and 350 GPa. We discovered three dynamically stable phases with stoichiometries FeMg 2 O 4 , Fe 2 MgO 4, and FeMg 3 O 4 with lower enthalpy than any known combination of Fe–Mg–O high-pressure compounds at 350 GPa. With the discovery of these phases, we construct the Fe–Mg–O ternary convex hull. We further clarify the composition- and pressure-dependence of structural motifs with the analysis of the AGA-found stable and metastable structures. Analysis of binary and ternary stable phases suggest that O, Mg, or both could stabilize a BCC iron alloy at inner core pressures.

Wang, Renhai↗
DOE OSTI2020

Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing

An Al–10Ce-8Mn (wt%) alloy was designed and fabricated by laser powder bed fusion additive manufacturing (AM). The rapid cooling rates of the AM process produced a refined microstructure with a large fraction of reinforcing intermetallic phases. The tensile properties of the alloy were characterized in the as-fabricated state and following thermal exposure. The properties of the as-fabricated microstructure showed exceptional high-temperature performance and strength retention at elevated temperatures up to 400 °C relative to benchmark wrought Al and AM Al alloy properties. Characterization of the microstructure and thermodynamic modeling of the ternary Al–Ce–Mn system rationalized the solidification and solid-state phase transformations. Finally, analysis of the relevant strengthening mechanisms for both the as-fabricated and thermally exposed conditions was performed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Efficient and Photostable Organic Solar Cells Achieved by Alloyed Dimer Acceptors with Tailored Linker Structures

Abstract High power conversion efficiency (PCE) and long‐term stability are prerequisites for commercialization of organic solar cells (OSCs). Herein, two dimer acceptors (DYTVT and DYTCVT) are developed with different properties through linker engineering, and study their effects as alloy‐like acceptors on the photovoltaic performance and photostability of OSCs. These ternary OSCs effectively combine the advantages of both dimer acceptors. DYTVT, characterized by its high backbone planarity, ensures elevated electron mobility and high glass‐transition temperature (T g ), leading to efficient charge transport and enhanced photostability of OSCs. Conversely, DYTCVT, with its significant dipole moment and electrostatic potential, enhances compatibility of the alloy acceptors with donors and refines the blend morphology, facilitating efficient charge generation in OSCs. Consequently, D18:DYTVT:DYTCVT OSCs exhibit higher PCE (18.4%) compared to D18:MYT (monomer acceptor, PCE = 16.5%), D18:DYTVT (PCE = 17.4%), and D18:DYTCVT (PCE = 17.0%) OSCs. Furthermore, owing to higherT g of alloy acceptors (133 °C) than MYT (T g = 80 °C) and DYTCVT (T g = 120 °C), D18:DYTVT:DYTCVT OSCs have significantly higher photostability (t 80% lifetime = 4250 h under 1‐sun illumination) compared to D18:MYT (t 80% lifetime = 40 h) and D18:DYTCVT OSCs (t 80% lifetime = 2910 h).

Chemistry↗
DOE OSTI2021

Ab Initio Modeling of fcc Fe-Co-Cr-Ni High Entropy Alloys with Full Composition Range

The Fe-Co-Cr-Ni quaternary system has been studied extensively in the past decade, not only because of the superior properties achieved like high tensile ductility and fracture toughness, but also it is the foundation for the development of FeCrCoNi-based HEAs. However, most of the investigations are mainly focusing on the equiatomic and semi-equiatomic compositions. The physical properties of non-equiatomic compositions are barely explored. In the current work, the ab initio approach is adopted to predict the lattice parameter, structure stabilities, elastic properties, and enthalpy of formations of fcc Fe-Cr-Co-Ni HEA single crystals with the special quasirandom structure (SQS) method. To expand the design of Fe-Co-Cr-Ni HEAs into a full composition range, the current simulations cover all the binaries, ternaries, and the whole quaternary system. The 2-D composition-property contour diagrams are created to show the physical properties in the ternary and quaternary systems. Furthermore, our investigation shows that the fcc alloys' lattice parameter increases with the addition of Fe and Cr and decreases with Ni and Co. In addition to the enthalpy of formation at o K, the shape distortion rate is proposed to be another essential parameter to evaluate crystal stability. The results show the addition of Cr would destabilize the fcc lattice and cause symmetry breaking. Finally, the result of Pugh’s ratio shows that most of the fcc alloys show ductile behavior (P > 1.75), especially for the alloys around Fe 3 Ni, FeCo, and Fe 2 NiCo (P > 2.5). The brittle behavior (P < 1.75) is located around Fe 3 Cr and Fe 2 CoCr. Meanwhile, Cr 2 NiCo and Cr 2 FeNiCo are considered promising compositions to be tried and verified experimentally because of the higher bulk modulus and moderate shear modulus.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Establishing a Design Strategy for Corrosion Resistant Structural Materials in Molten Salt Technologies

To address the gap in material design strategies for structural components in molten salt-powered technologies, the current work aimed to identify key parameters governing corrosion induced degradation of materials during exposures in molten halide salts. The applicability of the data on dissolution rates of pure metals (e.g., Cr) in a given molten salt to enable predictions of corrosion behavior of multicomponent binary and ternary Fe-based model and Ni-based commercial alloys isothermally exposed in the purified KCl-MgCl 2 in quartz capsules at 700 and 800°C was evaluated. The influence of alloy chemistry on initial dissolution rates and the consequent impact on the time-dependent corrosion induced microstructural evolution in the alloy subsurface was predicted with a coupled thermodynamic-kinetic model. Finally, the model was well able to predict the Cr depletion in all investigated alloys demonstrating the ability of the proposed approach to enable a unique design strategy for structural materials in molten salts.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Review of Direct Neutron Conversion and Detection Processes

Commercial and laboratory neutron detection systems use indirect neutron response of materials like pressurized helium-3 (via nuclear reaction 3He(n, p)3H) to measure and count neutrons emanating from a source. Recently a host of semiconductors, especially a ternary semiconductor of lithium indium diselenide (6LiInSe2) and a quaternary alloy of enriched lithium-6, indium, phosphorous, and selenium (6LiInP2Se6), have shown promising neutron counting possibilities by directly converting neutrons into charge-carrying elements within the body of the semiconductor. These semiconductors have high thermal neutron capture cross sections, suitable energy bandgaps (~2.0 electron volts) for room-temperature operations, and a favorable electronic band structure for efficient electron charge transport. The article examines the semiconductor properties of these compounds in terms of their neutron counting capabilities and possible ways to extract neutron energy information from them. Lithium-6 and boron-10 (with thermal neutron absorption cross sections of 938 ± 6 and 3855 ± 26 barns, respectively) produce charged particles to be measured via indirect neutron interactions. The efficiency of indirect conversion neutron detectors is limited because of the inefficiencies in conversion mechanism. In case of direct conversion, the neutrons create charged particles in a single material for neutron capture and charge collection, increasing detection efficiency. Unlike 3He proportional counters, which provide no neutron energy information, the semiconductors can be used as neutron energy spectrometer. Fully resolved neutron energy by 6LiInP2Se6 from a plutonium-beryllium source has been reported in the literature. We will discuss the influence of these multilayered semiconductors’ crystallographic structures and growth techniques on neutron energy determination.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2021

Alloying–realloying enabled high durability for Pt–Pd-3d-transition metal nanoparticle fuel cell catalysts

Abstract Alloying noble metals with non-noble metals enables high activity while reducing the cost of electrocatalysts in fuel cells. However, under fuel cell operating conditions, state-of-the-art oxygen reduction reaction alloy catalysts either feature high atomic percentages of noble metals (>70%) with limited durability or show poor durability when lower percentages of noble metals (<50%) are used. Here, we demonstrate a highly-durable alloy catalyst derived by alloying PtPd (<50%) with 3d-transition metals (Cu, Ni or Co) in ternary compositions. The origin of the high durability is probed by in-situ/operando high-energy synchrotron X-ray diffraction coupled with pair distribution function analysis of atomic phase structures and strains, revealing an important role of realloying in the compressively-strained single-phase alloy state despite the occurrence of dealloying. The implication of the finding, a striking departure from previous perceptions of phase-segregated noble metal skin or complete dealloying of non-noble metals, is the fulfilling of the promise of alloy catalysts for mass commercialization of fuel cells.

25 ENERGY STORAGE↗
DOE OSTI2025

Kinetics of amorphous defect phases measured through ultrafast nanocalorimetry

Recognition of the role of extended defects on local phase transitions has led to the conceptualization of the defect phase, localized thermodynamically stable interfacial states that have since been applied in a myriad of material systems to realize significant enhancements in material properties. Here, we explore the kinetics of grain boundary confined amorphous defect phases, utilizing the high temperature and scanning rates afforded by ultrafast differential scanning calorimetry to apply targeted annealing/quenching treatments at high rates capable of capturing the kinetic behavior. Four Al-based nanocrystalline alloys, including two binary systems, Al–Ni and Al–Y, and two ternary systems, Al–Mg–Y and Al–Ni–Y, are selected to probe the materials design space (enthalpy of mixing, enthalpy of segregation, chemical complexity) for amorphous defect phase formation and stability, with correlative transmission electron microscopy applied to link phase evolution and grain stability to nanocalorimetry signatures. A series of targeted isothermal annealing heat treatments is utilized to construct a Time–Temperature-Transformation curve for the Al–Ni system, from which a critical cooling rate of 2400 °C/s was determined for the grain boundary confined disordered-to-ordered transition. Finally, a thermal profile consisting of 1000 repeated annealing sequences was created to quantify the recovery of the amorphous defect phase following sequential annealing treatments, with results indicating remarkable microstructural stability after annealing at temperatures above 90% of the melting temperature. This work contributes to a deeper understanding of grain boundary localized thermodynamics and kinetics, with potential implications for the design and optimization of advanced materials with enhanced stability and performance.

Amorphous defect phases↗
DOE OSTI2022

Colloidal synthesis of monodisperse trimetallic Pt–Fe–Ni nanocrystals and their enhanced electrochemical performances

Among the multi-metallic nanocatalysts, Pt-based alloy nanocrystals (NCs) have demonstrated promising performance in fuel cells and water electrolyzers. In this paper, we demonstrate a facile colloidal synthesis of monodisperse trimetallic Pt–Fe–Ni alloy NCs through a co-reduction of metal precursors. The as-synthesized ternary NCs exhibit superior mass and specific activities toward oxygen reduction reaction (ORR), which are ~2.8 and 5.6 times as high as those of the benchmark Pt/C catalyst, respectively. The ORR activity of the carbon-supported Pt–Fe–Ni nanocatalyst is persistently retained after the durability test. Owing to the incorporation of Fe and Ni atoms into the Pt lattice, the as-prepared trimetallic Pt-alloy electrocatalyst also manifestly enhances the electrochemical activity and durability toward the oxygen evolution reaction with a reduced overpotential when compared with that of the benchmark Pt/C (Δη = 0.20 V, at 10 mA cm –2 ). This synthetic strategy paves the way for improving the reactivity for a broad range of electrocatalytic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Machine Learning Vacancy Formation Energy in Nickel-Based Superalloys

Thermal vacancies play a critical role in high-temperature Ni-based superalloys and influence various properties such as creep resistance, oxidation, etc. This study systematically investigates the impact of commonly used transition metals (Cr, Co, Fe), refractory metals (Nb, Ta, Mo, W) and other elements (Al, Cu, Ti, Mn) on the thermodynamic stability of 36 binary, 20 ternary, 11 quaternary, 9 quinary, and 3 senary FCC Ni-based alloys covering various elemental combinations. Density functional theory-based studies on Ni-X binary alloys show that higher concentrations of Cr, Nb, Ta, Al, and Ti introduce significant lattice distortions and broaden the distribution of vacancy formation energies (standard deviation up to 0.15 eV). These elements partially donate electrons, reducing their self-consistent chemical potentials relative to single-element reference values and lowering vacancy formation energies, while Co, Fe, Mo, and W show lower charge localization. These trends extend from 3-6 element alloys, where Cr, Nb, and Ta-rich compositions have low-energy states (~0.5 eV) that increase vacancy concentrations. Finally, graph neural network models are developed to screen over 5000 virtual alloys. Eleven leading compositions are identified with mean vacancy formation energy higher than 1.75 eV and vacancy concentration ~2 orders of magnitude lower than pure Ni at 1000 K. These results provide valuable guidelines to achieve controlled defect engineering in structural alloys.

DFT↗
DOE OSTI2022

Machine learning pipeline to predict defect behavior in metallic alloy systems

The interaction between defect and solute atoms is critical to the thermodynamic and kinetic behavior of metallic alloys under exposure to high-energy radiation, causing irradiation damage in materials. Radiation can generate non-equilibrium concentrations of point defects such as vacancies and interstitials. The excess point defects not only accelerate diffusional processes such as precipitation that cause radiation embrittlement, but also change the pathway of phase transformations, including nucleation processes. Understanding these defect behaviors is complicated by the challenge and complexity of addressing each possible local and discrete distribution of environments and chemical interactions around targeted defects-solute or solute-solute complexes. To resolve the challenge, machine learning regression techniques have emerged as powerful tools that can train and construct an energy model to accurately describe the chemical interactions of solutes and defects. In Fiscal Year 2022, the work focused on the workflow development and demonstration using machine learning regression, density functional theory, cluster expansion, and Monte Carlo simulation to predict the effects of ternary solute elements (e.g., aluminum and molybdenum) and point defects on the Cr-rich $\alpha^{\prime}$ precipitation in multicomponent FeCr model alloys. The computational outcomes include the prediction of the ternary phase diagram, vacancy formation energy for different compositions, and the effect of vacancies on the nucleation of Cr-rich clusters. The simulations predict a pronounced change of Cr solubility in bcc Fe by the addition of Al and the rejection of Al atoms from $\alpha^{\prime}$ precipitates. Additionally, the simulations show the formation of Cr-vacancy clusters as the initial nuclei for stable nucleation and growth of $\alpha^{\prime}$ particles. The results demonstrate important outcomes and applications of using machine learning pipeline to study model or commercial alloys with multicomponent solute species and point defects.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Phase stability in cast and additively manufactured Al-rich Al-Cu-Ce alloys

Additively manufactured (AM) eutectic Al alloy systems have been studied extensively for advantageous thermal stability and mechanical properties due to their refined microstructures. Al-Cu-Ce alloys are one subset of these AM eutectic alloys. Here we studied phase stability in AM Al-Cu-Ce alloys and compared it to that of conventionally cast ones. A new phase, Al 8 Cu 3 Ce, was identified in the microstructures of both AM and cast Al-Cu-Ce alloys. This Al 8 Cu 3 Ce phase was not previously included on experimental or thermodynamically calculated phase diagrams of the Al-Cu-Ce system. Therefore, we performed additional thermodynamic modeling of the system. These models were experimentally validated with cast and subsequently heat-treated Al-Cu-Ce alloys. We found that despite the refined microstructure of the AM alloys, the phases formed were consistent with the cast alloys, suggesting that AM processing did not significantly alter the formation and stability of phases from that in the conventional alloys. In conclusion, this work has resolved inconsistent previous descriptions of the Al-Cu-Ce ternary phase diagram in the Al-rich region and resulted in the addition of the Al 8 Cu 3 Ce as an equilibrium phase above 500 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermodynamic modeling of the Ti-Nb-Sn system and its preliminary applications in aging precipitation and solidification simulations

Abstract Gasping the thermodynamic and phase diagram of the materials being studied is essential for further guiding the development process, like composition design, heat treatment optimization and so on. Nb and Sn are common alloying elements in Ti-based biomedical alloys. In this work, the Ti-Nb-Sn system has been thermodynamically assessed based on experimental phase equilibria. A self-consistent thermodynamic description for the Ti-Nb-Sn system including two ternary compounds Ti 3 Nb 3 Sn 2 and Ti 3 NbSn has been obtained. Based on the comparison between the calculated and experimental phase equilibria, the reliability of the presently obtained thermodynamic description has been verified. The influence of Nb and Sn contents on the precipitation temperature and amount of hcp α -Ti phase in bcc β -(Ti, Nb) has been investigated based on thermodynamic calculations. Results show that the increase of Nb or Sn content in Ti-based alloys would significantly reduce the precipitation amount and transformation temperature of hcp α -Ti phase in bcc β -(Ti, Nb) and the influence of Nb content is more effective than that of Sn. The solidified phases in several as-cast alloys have been thermodynamically predicted based on Scheil solidification simulations. The presently developed thermodynamic description of the Ti-Nb-Sn system can serve as a sub-ternary one in the thermodynamic database for multicomponent Ti-based biomedical alloys.

Peng, Yingbiao↗
DOE OSTI2022

Identifying Hidden Li–Si–O Phases for Lithium‐Ion Batteries via First‐Principle Thermodynamic Calculations

SiO–based materials are promising alloys and conversion‐type anode materials for lithium‐ion batteries and are recently found to be excellent dendrite‐proof layers for lithium‐metal batteries. However, only a small fraction of the Li–Si–O compositional space has been reported, significantly impeding the understanding of the phase transition mechanisms and the rational design of these materials both as anodes and as protection layers for lithium‐metal anodes. Herein, we identify three new thermodynamically stable phases within the Li–Si–O ternary system (Li 2 SiO 5 , Li 4 SiO 6, and Li 4 SiO 8 ) in addition to the existing records via first‐principle calculations. The electronic structure simulation shows that Li 2 SiO 5 and Li 4 SiO 8 phases are metallic in nature, ensuring high electronic conductivity required as electrodes. Moduli calculations demonstrate that the mechanical strength of Li–Si–O phases is much higher than that of lithium metal. The diffusion barriers of interstitial Li range from 0.1 to 0.6 eV and the interstitial Li hopping serves as the dominating diffusion mechanism in the Li–Si–O ternary systems compared with vacancy diffusion. These findings provide a new strategy for future discovery of improved alloying anodes for lithium‐ion batteries and offer important insight towards the understanding of the phase transformation mechanism of alloy‐type protection layers on lithium‐metal anodes.

Qu, Jiale↗
DOE OSTI2020

Oxidation behavior of Fe-Cr-2Si alloys in high temperature steam

FeCrSi alloys have been proposed as alternatives to FeCrAl alloys for accident-tolerant fuel cladding in light water reactors. Experiments on the oxidation resistance of three Fe-Cr-2Si alloys in high-temperature steam, with 12, 16, and 20 wt. % Cr, show that ≥16 % Cr is sufficient to form a thin, passivating, binary oxide layer. Additionally, at 1200 °C, only Cr 2 O 3 and SiO 2 form on Fe 16 Cr 2 Si and Fe 20 Cr 2 Si, while additional ternary Fe oxides form on Fe 12 Cr 2 Si. Decohesion and spalling of oxide were observed on Fe-Cr-Si alloys exposed to steam at 900 °C and above. Fe 20 Cr 2 Si exhibits the best oxidation resistance of the three in high-temperature steam.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermodynamic Modeling of the Al-Ce-Cu-Mg-Si System and Its Application to Aluminum-Cerium Alloy Design

Recently discovered AlCe alloys have shown promise in a number of applications, but the propensity of Ce to react with Al and other alloying elements can complicate the phase equilibria and design approach. To solve this, the CALPHAD method is used to explore an alloy within the quinary Al-Ce-Cu-Mg-Si system by developing a thermodynamic database with self-consistent parameters. The database includes a description of all 10 binary systems and 8 ternary systems consisting of: (i) 6 Al-containing ternaries (Al-Ce-Cu, Al-Ce-Mg, Al-Ce-Si, Al-Cu-Mg, Al-Cu-Si and Al-Mg-Si); and (ii) 2 additional ternaries that include Mg and Si (i.e., Ce-Mg-Si and Cu-Mg-Si). The thermodynamic description for the Al-Ce-Mg and Al-Mg-Si systems were reassessed to ensure consistency with the binary systems and the Ce-Mg-Si system is presented for the first time and compared to theoretical data from DFT (Density Functional Theory). In addition to the ternary interactions, the quaternary compound Al3Cu2Mg9Si7 and solid solution extending from the ternary Al2CuMg phase (Al,Si)2CuMg are incorporated. The CALPHAD method is employed and leveraged through the use of a Materials Design Simulator (MDS) to accelerate the design of novel aluminum-cerium-based alloys. The combination of a CALPHAD-based framework with experimental efforts and industrial insight permits the development of three new Al-Ce alloys: Al-3.5Ce-0.4Mg-7Si (Ce-modified A356), Al-5Ce-1Cu-0.5Mg-10Si and Al-19Ce-0.9Mg-1.1Si.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Resolving Atomic-Scale Structure and Chemical Coordination in High-Entropy Alloy Electrocatalysts for Structure–Function Relationship Elucidation

The recent breakthrough in confining five or more atomic species in nanocatalysts, referred to as high-entropy alloy nanocatalysts (HEAs), has revealed the possibilities of multielemental interactions that can surpass the limitations of binary and ternary electrocatalysts. The wide range of potential surface configurations in HEAs, however, presents a significant challenge in resolving active structural motifs, preventing the establishment of structure-function relationships for rational catalyst design and optimization. Here, we present a methodology for creating sub-5 nm HEAs using an aqueous-based peptide-directed route. Using a combination of pair distribution function and X-ray absorption spectroscopy, HEA structure models are constructed from reverse Monte Carlo modeling of experimental data sets and showcase a clear peptide-induced influence on atomic-structure and chemical miscibility. Coordination analysis of our structure models facilitated the construction of structure-function correlations applied to electrochemical methanol oxidation reactions, revealing the complex interplay between multiple metals that leads to improved catalytic properties. Our results showcase a viable strategy for elucidating structure-function relationships in HEAs, prospectively providing a pathway for future materials design.

36 MATERIALS SCIENCE↗