Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thermal inertia”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

A comparison of the thermal and radar characteristics of Mars

Results of thermal infrared sensing and radar observations of the Martian surface are compared for the region centered on +22 deg latitude. Values of the apparent thermal inertia of the surface were derived from surface brightnesses observed by the Viking Orbiter Infrared Thermal Mapper, while radar cross sections were obtained in earth-based experiments at wavelengths of 3.8, 12.5 and 70 cm. A correlation between the thermal inertia and radar cross section values is observed which is strongest with the 70-cm radar data except between longitudes of 10 and 90 deg, where a slight anticorrelation is found. The mixing of small (much less than 70 cm) rocks into a surface of fine material can account for the data between 90 and 370 deg longitude, with as much as 50% of the surface covered by rock in Syrtis Major, Isidis Planitia and parts of Elysium Planitia, and little or no rock cover near Olympus Mons, Elysium Mons, and Amazonis Planitia. The remaining longitudes may be explained in terms of the effects of atmospheric dust on the surface temperature or the effects of local variations in large-scale roughness or scattering from rocks. Data from the 90 to 370 deg longitude region are consistent with the division of the Martian surface into two types of terrain, possibly related to the erosional or depositional nature of the regions.

Jakosky, B. M.↗
NASA NTRS1980

Investigation of the application of HCMM thermal data to snow hydrology

All heat capacity mapping mission (HCMM) data needed for the investigation were received, including the imagery and CCT's for the April 1979 day/night registered data set for the Sierras study area. Three sets of excellent data for the Sierras study were received. Analysis of the earlier two sets (late May and mid July 1978) was completed. Initial examination of the latest imagery received indicates that the April 1979 data are the best quality HCMM day/night registered data of the three data sets. The thermal inertia imagery is particularly outstanding, appearing to contain much more detail and information than the earlier thermal inertia images.

Barnes, J. C.↗
NASA NTRS1979

Surface temperature variations as measured by the Heat Capacity Mapping Mission

The AEM-1 satellite, the Heat Capacity Mapping Mission, has acquired high-quality thermal infrared data at times of day especially suited for studying the earth's surface and the exchange of heat and moisture with the atmosphere. Selected imagery illustrates the considerable variability of surface temperature in and around cities, in the dry southwestern United States, in the Appalachian Mountains, and in agricultural areas. Through simplifying assumptions, an analytic experience is derived that relates day/night temperature differences to the near-surface layer (thermal inertia) and to meteorological factors. Analysis of the result suggests that, in arid regions, estimates of relative thermal inertia may be inferred, whereas, in agricultural areas, a hydrologic interpretation is possible.

Price, J. C.↗
NASA NTRS1993

A coupled subsurface-boundary layer model of water on Mars

A 1D numerical model of the exchange of H2O between the atmosphere and subsurface of Mars through the PBL is employed to explore the mechanisms of H2O exchange and to elucidate the role played by the regolith in the local H2O budget. The atmospheric model includes effects of Coriolis, pressure gradient, and frictional forces for momentum: radiation, sensible heat flux, and advection for heat. It is suggested that in most cases, the flux through the Martian surface reverses twice in the course of each sol. The effects of surface albedo, thermal inertia, solar declination, atmospheric optical depth, and regolith pore structure are explored. It is proposed that higher thermal inertia forces more H2O into the atmosphere because the regolith is warmer at depth.

Zent, Aaron P.↗
NASA NTRS1989

Systematic biases in radiometric diameter determinations

Radiometric diameter determinations are presently shown to often be significantly affected by the effect of rotation. This thermal effect of rotation depends not only on the object's thermal inertia, rotation rate, and pole orientation, but also on its temperature, since colder objects having constant rotation rate and thermal inertia will radiate less of their heat on the diurnal than on the nocturnal hemisphere. A disk-integrated beaming parameter of 0.72 is determined for the moon, and used to correct empirically for the roughness effects in thermophysical models; the standard thermal model is found to systematically underestimate cold object diameters, while overstating their albedos.

Spencer, John R.↗
NASA NTRS1987

High resolution thermal infrared mapping of Martian channels

Viking Infrared Thermal Mapper (IRTM) high resolution (2 to 5 km) data were compiled and compared to Viking Visual Imaging Subsystem (VIS) data and available 1:5M geologic maps for several Martian channels including Dao, Harmakhis, Mangala, Shalbatana, and Simud Valles in an effort to determine the surface characteristics and the processes active during and after the formation of these channels. Results show a dominance of aeolian processes active in and around the channels. These processes have left materials thick enough to mask any genuine channel deposits. Results also indicate that very comparable Martian channels and their surrounding terrain are blanketed by deposits which are homogeneous in their thermal inertia values. However, optimum IRTM data does not cover the entire Martian surface and because local deposits of high thermal inertia material may not be large enough in areal extent or may be in an unfavorable location on the planet, a high resolution data track may not always occur over these deposits. Therefore, aeolian processes may be even more active than the IRTM data tracts can always show.

Craddock, R. A.↗
NASA NTRS1986

Discrimination of soil hydraulic properties by combined thermal infrared and microwave remote sensing

Using the De Vries models for thermal conductivity and heat capacity, thermal inertia was determined as a function of soil moisture for 12 classes of soil types ranging from sand to clay. A coupled heat and moisture balance model was used to describe the thermal behavior of the top soil, while microwave remote sensing was used to estimate the soil moisture content of the same top soil. Soil hydraulic parameters are found to be very highly correlated with the combination of soil moisture content and thermal inertia at the same moisture content. Therefore, a remotely sensed estimate of the thermal behavior of the soil from diurnal soil temperature observations and an independent remotely sensed estimate of soil moisture content gives the possibility of estimating soil hydraulic properties by remote sensing.

Vandegriend, A. A.↗
NASA NTRS1981

Visual and infrared observations of wind streaks on Mars

Global correlations of the regions in which three Martian wind streak types (bright, dark, splotch-related) vary according to latitude, elevation, albedo, color, and predawn residual temperature provide constraints on models of streak formation and modification. Bright streaks are relatively stable and occur over a wide range of geographical surfaces. They are elevation-independent, suggesting that their formation is due to atmospheric dust fallout. Dark streaks appear variable from 20 to 40 deg S and at elevations between 3 and 7 km. They are associated with dark surfaces, having high thermal inertias. Splotch-related streaks occur at elevations between 0 and 6 km and at areas of either low or high thermal inertias, which is the cause of its modifying surface winds. Data are graphically presented, and the methods of data collection are fully explained. Regional studies of various types of streaks in Syrtis Major, Syria Planum, Oxia Palus, Mesogea and Pettit Craters, and Noachis confirm that the correlations found at the global level also occur at regional scales.

Peterfreund, A. R.↗
NASA NTRS1982

Structure of the Saint Francois Mountains and surrounding lead belt, S.E. Missouri: Inference from thermal IR and other data sets

Progress in the preparation of manuscripts on the discovery of a Precambrian rift running NW-SE through Missouri as seen in free air and Bouguer gravity anomalies and in HCMM data, and on digital image processing of potential field and topographic data on the rift is reported. Copies of the papers are attached. Contrast-enhanced HCMM images that have been transformed to Mercator projections are presented. Shaded relief map overlays of thermal and apparent thermal inertia images used as part of a masers thesis examining correlations between HCMM data products, linears, and geologic units are presented. Progress in examination of the difference in information content of daytime infrared, night time infrared, albedo, and thermal inertia images and their application to he identification of linears not directly controlled by topography is reported. Thermal infrared and albedo data were coded as hue, saturation and brightness values to generate a color display, which is included.

Arvidson, R. E.↗
NASA NTRS1981

Application of HCMM data to regional geologic analysis for mineral and energy resource evaluation

The effects of topographic elevation and slope on thermal images were examined using representative field obstructions of the solar and sky radiation and a simple linearized thermal model. The forms are easily adapted for analysis of HCMM images using the DMA digital terrain data. From a representative set of field observations, it was found that flux variations with elevation can cause changes in the mean diurnal temperature gradient from -4 deg to -14 deg per km evaluated at 2000 m. Changes in the temperature difference gradient of 1 to 2 C per km are also produced which is equivalent to an effective thermal inertia gradient of 100 W s to the 1/2 power/sq m K/1 per km. Exposed bedrock on topographic ridges will appear to have a lower thermal inertia due to the additional effect.

Watson, K.↗
NASA NTRS1991

Thermal and albedo mapping of the north and south polar regions of Mars

The first maps are presented of the north and south polar regions of Mars. The thermal properties of the midlatitude regions from -60 deg to +60 deg latitude were mapped in previous studies. The presented maps complete the mapping of entire planet. The maps for the north and south polar regions were derived from Viking Infrared Thermal Mapper (IRTM) observations. Best fit thermal inertias were determined by comparing the available IRTM 20 micron channel brightness within a given region to surface temperatures computed by a diurnal and seasonal thermal model. The model assumes no atmospheric contributions to the surface heat balance. The resulting maps of apparent thermal inertia and average IRTM measured solar channel lambert albedo for the north and south polar regions from the poles to +/- 60 deg latitude.

Paige, D. A.↗
NASA NTRS1994

Physical properties (particle size, rock abundance) from thermal infrared remote observations: Implications for Mars landing sites

Critical to the assessment of potential sites for the 1997 Pathfinder landing is estimation of general physical properties of the martian surface. Surface properties have been studied using a variety of spacecraft and earth-based remote sensing observations, plus in situ studies at the Viking lander sites. Because of their value in identifying landing hazards and defining scientific objectives, we focus this discussion on thermal inertia and rock abundance derived from middle-infrared (6 to 30 microns) observations. Used in conjunction with other datasets, particularly albedo and Viking orbiter images, thermal inertia and rock abundance provide clues about the properties of potential Mars landing sites.

Christensen, P. R.↗
NASA NTRS1992

Lithological and textural controls on radar and diurnal thermal signatures of weathered volcanic deposits, Lunar Crater region, Nevada

Radar backscatter intensity as measured by calibrated synthetic aperture radar (SAR) systems is primarily controlled by three factors: local incidence angle, wavelength-scale roughness, and dielectric permittivity of surface materials. Radar observations may be of limited use for geological investigations of surface composition, unless the relationships between lithology and the above characteristics can be adequately understood. In arid terrains, such as the Southwest U.S., weathering signatures (e.g. soil development, fracturing, debris grain size and shape, and hill slope characteristics) are controlled to some extent by lithologic characteristics of the parent bedrock. These textural features of outcrops and their associated debris will affect radar backscatter to varying degrees, and the multiple-wavelength capability of the JPL Airborne SAR (AIRSAR) system allows sampling of textures at three distinct scales. Diurnal temperature excursions of geologic surfaces are controlled primarily by the thermal inertia of surface materials, which is a measure of the resistance of a material to a change in temperature. Other influences include albedo, surface slopes affecting insolation, local meteorological conditions and surface emissivity at the relevant thermal wavelengths. To first order, thermal inertia variations on arid terrain surfaces result from grain size distribution and porosity differences, at scales ranging from micrometers to tens of meters. Diurnal thermal emission observations, such as those made by the JPL Thermal Infrared Multispectral Scanner (TIMS) airborne instrument, are thus influenced by geometric surface characteristics at scales comparable to those controlling radar backscatter. A preliminary report on a project involving a combination of field, laboratory and remote sensing observations of weathered felsic-to basaltic volcanic rock units exposed in the southern part of the Lunar Crater Volcanic Field, in the Pancake Range of central Nevada is presented. Focus is on the relationship of radar backscatter cross sections at multiple wavelengths, apparent diurnal temperature excursions identified in multi-temporal TIMS images, surface geometries related to weathering style, and parent bedrock lithology.

Plaut, Jeffrey J.↗
NASA NTRS1983

Amalthea - Implications of the temperature observed by Voyager

The temperature profile of Amalthea's surface layer is modeled as a function of location and time of day, assuming a triaxial ellipsoid shape and thermal properties similar to those of the lunar soil. Although the major heat source is direct insolation, temperatures are slightly increased by thermal radiation from Jupiter, sunlight reflected from the planet, and charged particle bombardment. Possible sources of error in the model are discussed in detail, including satellite shape effects, unusually low emissivity, uncommonly rough surface, abnormal thermal inertia, charged particle flux variability, and Joule heating. Voyager 1 IRIS observations suggest that the Amalthean surface has an emissivity near unity, but cannot put any useful limits on the thermal inertia of the Amalthean surface layer.

Simonelli, D. P.↗
DOE OSTI2020

Normal modes, rotational inertia, and thermal fluctuations of trapped ion crystals

The normal modes of a trapped ion crystal are derived using an approach based on the Hermitian properties of the system’s dynamical matrix. This method is equivalent to the standard Bogoliubov method, but for classical systems it is arguably simpler and more general in that canonical coordinates are not necessary. The theory is developed for stable, unstable, and neutrally-stable systems. The method is then applied to ion crystals in a Penning trap. Reduced eigenvalue problems for the case of large applied magnetic field are developed, for which the spectrum breaks into E x B drift modes, axial modes, and cyclotron modes. Thermal fluctuation levels in these modes are analyzed and shown to be consistent with the Bohr-van-Leeuwen theorem, provided that neutrally-stable modes associated with crystal rotations are included in the analysis. An expression for the rotational inertia of the crystal is derived, and a magnetic contribution to this inertia, which dominates in large magnetic fields, is described. An unusual limit is discovered for the special case of spherically-symmetric confinement, in which the rotational inertia does not exist and changes in angular momentum leave the rotation frequency unaffected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2022

Thermal Hydraulic Disaggregation of SMAP Soil Moisture Over the Continental United States

Thermal Hydraulic disaggregation of Soil Moisture (THySM) algorithm was implemented to downscale NASA’s Soil Moisture Active Passive (SMAP) Enhanced soil moisture (SM) product to 1 km over the continental United States (CONUS). This algorithm was developed by combining thermal inertia theory with a soil hydraulic-based approach that considers fine-scale SM spatial distribution driven by both heat fluxes and hydraulic conductivity in soils. Relative soil wetness values were estimated using land surface temperature and normalized difference vegetation index for the thermal inertia model and using soil properties for the hydraulic model. The relative soil wetness values at 1 km from both models were then combined by using weighting functions whereby the spatial distribution of SM was governed more by thermal fluxes during times of strong heat transport and infiltration during moisture abundant soil conditions. THySM values were evaluated using in situ SM measurements from SMAP Core Validation Sites (CVS), the USDA Soil Climate Analysis Network, and the NOAA Climate Reference Network over CONUS. THySM shows higher accuracy than the SMAP / Sentinel-1 (SPL2SMAP_S) 1 km SM product when compared to in situ measurements. The accuracy of THySM is 0.048 m3/m3 based on unbiased root mean square error (ubRMSE), outperforming SPL2SMAP_S by 0.01-0.02 m3/m3. The ubRMSE of THySM 1km SM over the SMAP grassland/rangeland-dominated CVS sites is better than 0.04 m3/m3, which meets the SMAP mission SM accuracy requirement applied at 9 and 36 km.

SMAP↗
NASA NTRS1991

Phobos - Spectrophotometry between 0.3 and 0.6 micron and IR-radiometry

A 0.3 - 0.6 micron UV-visible spectrophotometer and a 5 - 50 micron radiometer in the KRFM experiment on Phobos 2 measured two groundtracks in the equatorial region of Phobos. Preliminary results indicate that three surface units can be recognized on the basis of differing UV-visible spectral reflectance properties. One of the units is most comparable spectrally to optically darkened mafic material, and a second is comparable either to anhydrous carbonaceous chondrite or to blackened mafic material. Spectral properties of the third unit do not resemble those of known meteorite types. Brightness temperatures measured by the radiometer are consistent with a typical surface thermal inertia of 1 - 3 x 10 to the -3 cal/(sq cm deg s exp 1/2), as suggested by previous investigations, implying a lunar-like regolith texture. At least one area of possibly higher thermal inertia has been tentatively identified, where a large degraded crater is crossed by several grooves. These results indicate significant lateral heterogeneity in the optical and textural properties of Phobos' surface.

Ksanfomality, L.↗
NASA NTRS1982

Application of HCMM data to regional geologic analysis for mineral and energy resource evaluation

Using a thermal-inertia mapping algorithm which provides greater discrimination capability than those in current use, a geologic features was detected in the Cabeza Prieta, Arizona, area. Initially seen on an image formed as a difference of two thermal-inertia images, it was found to be the extension of a bilaterally symmetrical aeromagnetic feature which trends northeast for a distance of at least 1200 km.

Watson, K.↗