Search NASA⌕ Search

SEARCH · Search NASA

Results for “Tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Insights into Boron-Based Polyanion-Tuned High-Nickel Cathodes for High-Energy-Density Lithium-Ion Batteries

Ultrahigh-Ni layered oxide cathodes (Ni content > 90%) are at the forefront for potentially enabling higher-energy density lithium-ion batteries. Unfortunately, they suffer from rapid capacity fade, poor thermal stability, and increased air sensitivity. Introduction of boron-based polyanion into layered cathodes has been found to be effective in stabilizing high-Ni cathodes, but the mechanism behind it is not yet fully understood. To develop a better understanding, we present here an extensive characterization of the ultrahigh-Ni cathode LiNi 0.94 Co 0.06 O 2 (NC) and B 2 O 3 -LiNi 0.94 Co 0.06 O 2 (B-NC). The B-NC delivers a capacity of 223 mA h g -1 with 80% capacity retention after 400 cycles in full cells with graphite anodes, superior to 61% retention for NC. In-depth interphase investigations reveal that the improved cyclability is attributed to the development of a well-passivated boron/phosphorus-rich cathode-electrolyte interphase in B-NC. Moreover, B-NC demonstrates a considerably enhanced air-exposure and thermal stability. A 30-day air-stored B-NC delivers a discharge capacity of 125 mA h g -1 at 10C rate, in sharp contrast to 65 mA h g -1 for the stored NC. Finally, this work advances the understanding of the effect boron-based polyanion insertion into layered oxides has on battery performance and offers a viable strategy for developing practically viable ultra-high-Ni cathodes with high-energy density.

25 ENERGY STORAGE↗

Tuning Electrogenerated Chemiluminescence Intensity Enhancement Using Hexagonal Lattice Arrays of Gold Nanodisks

Electrogenerated chemiluminescence (ECL) microscopy shows promise as a technique for mapping chemical reactions on single nanoparticles. The technique’s spatial resolution is limited by the quantum yield of the emission and the diffusive nature of the ECL process. To improve signal intensity, ECL dyes have been coupled with plasmonic nanoparticles, which act as nanoantennas. Here, we characterize the optical properties of hexagonal arrays of gold nanodisks and how they impact the enhancement of ECL from the coreaction of tris(2,2'-bipyridyl)dichlororuthenium(II) hexahydrate and tripropylamine. Here, we find that varying the lattice spacing results in a 23-fold enhancement of ECL intensity because of increased dye-array near-field coupling as modeled using finite element method simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning Noncollinear Spin Structure and Anisotropy in Ferromagnetic Nitride MXenes

Recent experimental success in the realization of two-dimensional magnetism has invigorated the search for low-dimensional material systems with tunable magnetic anisotropy that exhibit intrinsic long-range ferromagnetic order. Here in this paper, we report that modifying the surface termination and transition metal in monolayer M 2 NT x nitride MXenes gives rise to a rich diversity of noncollinear spin structures and finely tunable magnetocrystalline anisotropy. Based on first-principles simulations, we predict that manipulating the strength of the spin–orbit interaction and electron localization via the chemical degrees of freedom can induce sufficient anisotropy to counteract thermal fluctuations that suppress long-range magnetic order. We find that Ti 2 NO 2 and Mn 2 NF 2 MXenes have continuous O(3) and O(2) spin symmetries, respectively, that may be broken by an applied field, while Cr 2 NO 2 and Mn 2 NO 2 are intrinsic Ising ferromagnets with out-of-plane easy axes and magnetic anisotropy energies up to 63 μeV/atom. These systems also exhibit both gapped and gapless Dirac points near the Fermi level. Our study suggests that nitride MXenes offer a promising avenue for achieving both practical spintronic devices and investigating fundamental spin processes in two-dimensional materials.

2D materials↗

Tuning the Formations of Metal-Organic Frameworks by Modification of Ratio of Reactant, Acidity of Reaction System, and Use of a Secondary Ligand

Four porous coordination networks (PCNs), {[Zn3O(H2O)(3)(adc)(3)]center dot 2(C2H6NH2)center dot 2(DMF)center dot 3(H2O)}(n) (PCN-131), Zn-2(DMA)(2)(adc)(2)]center dot 2(DMA)}(n) (PCN-132), {[Zn3O(DMF)(adc)(3)(4,4'-bpy)]center dot 2(C2H6NH2)center dot S}(n) (PCN-131'), and {[Zn(adc)(4,4'-bpy)(0.5)]center dot S}(n) (PCN-132'), have been synthesized by the assembly of anthrancene-9,10-dicarboxylic acid (H(2)adc) with Zn(II) under different reaction conditions, including modifications of reactant ratio, acidity variations, and the use of a secondary ligand. Single-crystal X-ray diffraction studies reveal that PCN-131, obtained from the dimethylformamide (DMF) solution under acid condition, has a three-dimentional (3D) framework structure with one-dimensional (1D) honeycomb channels. PCN-132 isolated from dimethylacetamide (DMA) solution without adding acid in synthesis is a two-dimensional (2D) layer compound. By employing 4,4'-bipyridyl (4,4'-bpy) as a secondary ligand, PCN-131' and PCN-132' were synchronously synthesized as a mixture outcome with more PCN-131' than PCN-132'. In PCN-131', 4,4'-bpy acting as a secondary ligand is arranged inside the honeycomb channel of the 3D PCN-131, resulting in an effective improvement of thermal stability of the network, while in PCN-132', 4,4'-bpy ligands link 2D layers of PCN-132 to form a pillared-layer 3D framework Gas adsorption has been performed for selected materials. The results show that the framework of PCN-131 is thermally unstable after removing the solvent molecules coordinated to their metal sites. While PCN-131' is stable for gas uptake, with an evaluated Langmuir surface area of 199.04 m(2) g(-1), it shows a selective adsorption of CO2 over CH4.

Gao, Q↗

Tuning the Moisture and Thermal Stability of Metal–Organic Frameworks through Incorporation of Pendant Hydrophobic Groups

An isostructural series of NbO-type porous metal–organic frameworks (MOFs) with different dialkoxy-substituents of formula Cu 2 (TPTC-OR) (TPTC-OR = 2',5'-di{alkyl}oxy-[1,1':4',1"-terphenyl]-3,3",5,5"-tetracarboxylate, R = Me, Et, n Pr, n Hex) has been synthesized and characterized. The moisture stability of the materials has been evaluated, and a new superhydrophobic porous MOF has been identified. The relationship between pendant side chain length and thermal stability has been analyzed by in situ synchrotron powder X-ray diffraction, showing decreased thermal stability as the side chain length is increased, contradictory to thermogravimetric decomposition studies. Additionally, the four materials exhibit moderate Brunauer–Emmett–Teller (BET) and Langmuir surface areas (1127–1396 m 2 g –1 and 1414–1658 m 2 g –1 ) and H 2 capacity up to 1.9 wt % at 77 K and 1 bar.

Makal, Trevor A.↗

Electrostatically Tuned Self-Assembly of Branched Amphiphilic Peptides

Electrostatics plays an important role in the self-assembly of amphiphilic peptides. To develop a molecular understanding of the role of the electrostatic interactions, we develop a coarse-grained model peptide and apply self-consistent field theory to investigate the peptide assembly into a variety of aggregate nanostructures. We find that the presence and distribution of charged groups on the hydrophilic branches of the peptide can modify the molecular configuration from extended to collapsed. This change in molecular configuration influences the packing into spherical micelles, cylindrical micelles (nanofibers), or planar bilayers. The effects of charge distribution therefore has important implications for the design and utility of functional materials based on peptides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning crystallization pathways through sequence engineering of biomimetic polymers

Two-step nucleation pathways in which disordered, amorphous, or dense liquid states precede the appearance of crystalline phases have been reported for a wide range of materials, but the dynamics of such pathways are poorly understood. Moreover, whether these pathways are general features of crystallizing systems or a consequence of system-specific structural details that select for direct versus two-step processes is unknown. Using atomic force microscopy to directly observe crystallization of sequence-defined polymers, we show that crystallization pathways are indeed sequence dependent. When a short hydrophobic region is added to a sequence that directly forms crystalline particles, crystallization instead follows a two-step pathway that begins with the creation of disordered clusters of 10–20 molecules and is characterized by highly non-linear crystallization kinetics in which clusters transform into ordered structures that then enter the growth phase. The results shed new light on non-classical crystallization mechanisms and have implications for the design of self-assembling polymer systems.

36 MATERIALS SCIENCE↗

Topologically guided tuning of Zr-MOF pore structures for highly selective separation of C6 alkane isomers

Effective separation of alkane isomers is a critical step in the petroleum refining process to produce gasoline with high octane rating. Current technology relies on energy intensive distillation method. Adsorptive separation using porous solids offers an alternative route that is more cost effective, lower energy and higher efficiency. Guided by topology-directed design and synthesis, we have developed a series of zirconium-based metal-organic frameworks with optimized pore structure for efficient separation of C6 alkane isomers, Zr-bptc adsorbs a large amount of n-hexane while excluding branched isomers. The n-hexane uptake is ~70% higher than that of a benchmark adsorbent, zeolite-5A. A derivative structure, Zr-abtc, is capable of discriminating all three C6 isomers with a high separation factor for 3-methylpentane over 2,3-dimethylbutane. This property is important for producing gasoline with further improved quality.

36 MATERIALS SCIENCE↗