Search NASA⌕ Search

SEARCH · Search NASA

Results for “UNLOADING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Critical Compressive Stress for Flat Rectangular Plates Supported Along all Edges and Elastically Restrained Against Rotation Along the Unloaded Edges, Special Report 189

A chart is presented for the values of the coefficient in the formula for the critical compressive stress at which buckling may be expected to occur in flat rectangular plates supported along all edges and, in addition, elastically restrained against rotation along the unloaded edges. The mathematical derivations of the formulas required in the construction of the chart are given.

Lundquist, Eugene E.↗

MESSENGER Observations of Extreme Magnetic Tail Loading and Unloading During its Third Flyby of Mercury: Substorms?

During MESSENGER's third flyby of Mercury on September 29, 2009, a variable interplanetary magnetic field produced a series of several minute enhancements of the tail magnetic field hy factors of approx. 2 to 3.5. The magnetic field flaring during these intervals indicates that they result from loading of the tail with magnetic flux transferred from the dayside magnetosphere. The unloading intervals were associated with plasmoids and traveling compression regions, signatures of tail reconnection. The peak tail magnetic flux during the smallest loading events equaled 30% of the magnetic flux emanating from Mercury, and may have reached 100% for the largest event. In this case the dayside magnetic shielding is reduced and solar wind flux impacting the surface may be greatly enhanced. Despite the intensity of these events and their similarity to terrestrial substorm magnetic flux dynamics, no energetic charged particles with energies greater than 36 keV were observed.

Slavin, James A.↗

MESSENGER Observations of Extreme Loading and Unloading of Mercury's Magnetic Tail

During MESSENGER's third flyby of Mercury, a series of 2-3 minute long enhancements of the magnetic field in the planet's magnetotail were observed. Magnetospheric substorms at Earth are powered by similar tail loading, but the amplitude is approximately 10 times less and the durations are 1 hr. These observations of extreme loading imply that the relative intensity of substorms at Mercury must be much larger than at Earth. The correspondence between the duration of tail enhancements and the calculated approximately 2 min Dungey cycle, which describes plasma circulation through Mercury's magnetosphere, suggests that such circulation determines substorm timescale. A key aspect of tail unloading during terrestrial substorms is the acceleration of energetic charged particles. Such signatures are puzzlingly absent from the MESSENGER flyby measurements.

Slavin, James A.↗

MESSENGER Observations of Extreme Loading and Unloading of Mercury's Magnetic Tail

During MESSENGER's third flyby of Mercury, the magnetic field in the planet's magnetotail increased by factors of 2 to 3.5 over intervals of 2 to 3 min. Magnetospheric substorms at Earth are powered by similar tail loading, but the amplitude is approx.10 times less and typical durations are approx.1 hour. The extreme tail loading observed at Mercury implies that the relative intensity of sub storms must be much larger than at Earth. The correspondence between the duration of tail field enhancements and the characteristic time for the Dungey cycle, which describes plasma circulation through Mercury's magnetosphere. suggests that such circulation determines substorm timescale. A key aspect of tail unloading during terrestrial substorms is the acceleration of energetic charged particles, but no acceleration signatures were seen during the MESSENGER flyby.

Slavin, James A.↗

Calf Strength Loss During Mechanical Unloading: Does It Matter?

During the mechanical unloading of spaceflight and its ground-based analogs, muscle mass and muscle strength of the calf are difficult to preserve despite exercise countermeasures that effectively protect these parameters in the thigh. It is unclear what effects these local losses have on balance and whole body function which will be essential for successful performance of demanding tasks during future exploration missions.

English, K. L.↗

The Effects of Placental-expanded (PLX-PAD) Stromal Cell Treatment, Hindlimb Unloading, and Isolation on the Behavior of Female Mice

Spaceflight can lead to altered immune responses and inflammation (Crucian et al. 2014) and elevated levels of inflammation are connected to anxiety and depression. A recent study on the International Space Station showed that mice exhibited a novel circling behavior during spaceflight (Ronca et al. 2019). However, there is still a gap in knowledge on how microgravity impacts behavior. In this current study, we performed 30 days of hindlimb unloading (HU) on four-month old female mice and analyzed select behavior from video image capture. We also determined the effects of PLacental-eXpanded stromal cells derived from the maternal placenta (PLX-PAD), alone and in combination with HU and isolation, on behavior. We have previously shown that PLX-PAD mitigates select inflammatory responses and changes in cytokine expression caused by HU. In-cage behaviors were analyzed in HU or control female mice treated with 2 injections of PlasmaLyte (Sham) or PLX-PAD (n=7/group). We found that PLX-PAD decreased exploratory behaviors compared to Sham-treated mice at night. Normally loaded (NL) PLX mice slept less than NL Sham mice during the day, and HU animals had significantly higher involuntary movement during sleep compared to NL animals, suggesting sleep disruption. Overall, we show that both HU and PLX affect important behavioral factors. This experiment is the first to study the effects of PLX-PAD on behavior. Additional studies are needed to define the behavioral changes in spaceflight and test possible countermeasures.

PLacental-EXpanded stromal cells, behavior, microg↗

Mitigating the Impact of Momentum Unloads on Station Keeping Around Libration Point Orbits

The Space Weather Follow On (SWFO) observatory will observe the Sun from L1, collecting solar wind data and coronal imagery, while providing early warning for space weather events. SWFO is a ride-share mission on SpaceX Falcon9 that is carrying IMAP. The spacecraft will be operated by NOAA and is expected to launch in February 2025. In order to meet NOAA’s operational requirements SWFO must maintain a Sun-Earth-Vehicle (SEV) angle between 4 and 13 degrees for at least 5 years. This constraint drives the size of the Lissajous orbit. SWFO is required keep a Sun pointing attitude in order to perform the Sun observations. Frequent Momentum Unloads are required to desaturate its reaction wheals. Station-keeping maneuvers are required to stay in orbit around L1, they are planned to be performed every 30 days.

Libration Point Orbits↗

Attitude Ground System: Recent Experiences in Attitude Sensor Calibration and Upcoming Mission Support for Momentum Unloading

A key component of the mission ground system used for supporting NASA Goddard Space Flight Center space missions, known as the Attitude Ground System (AGS), is used to perform operational and analytical support for the spacecraft attitude con-trol system (ACS). The AGS is comprised of a real-time attitude analysis and moni-toring system, and a tool for performing offline analysis of the ACS system using key sensor telemetry collected and stored onboard and transmitted to the mission operations center. The AGS performs numerous functions, including independent ground attitude determination, attitude slew planning and commanding, attitude sensor calibration, and real-time monitoring of the health and safety of the ACS. The AGS is developed in MATLAB using a core library of utility functions called the Multi-Mission Three-Axis Satellite System (MTASS). The MTASS library has been used to support mission operations for over thirty NASA missions starting in the late 1990s. It is customized for each mission to meet specific mission requirements. In this paper we describe recent operational experience using the AGS to support the launch and early orbit (L&EO) phase of the Plankton, Aerosol, Cloud Ocean Ecosys-tem (PACE) and Joint Polar Satellite System (JPSS) missions. Our summary of L&EO support for PACE and JPSS includes ACS sensor calibration of the alignment and scale factors for the Star Trackers, Inertial Reference Unit, and Three-Axis Magnetometers. We will also describe new capabilities for planning and executing reaction wheel momentum unloading for the Roman Space Telescope (RST) During the spacecraft early orbit phase, the AGS is operated in the mission operations center by a team of subject matter experts that also develop and configure the AGS soft-ware. This unique approach, integrating system development and operation in a sin-gle engineering team, provides valuable expertise for quick assessment of ACS per-formance and safety; critical to anomaly resolution and mission success.

Guidance, Navigation, and Control↗

Apparatus and method for magnetically unloading a rotor bearing

An apparatus and method for unloading a rotor bearing is described. The apparatus includes an electromagnet for levitating the rotor. In one embodiment, a sensor of the magnetic field near the electromagnet is used to control the current to levitate the rotor. In another embodiment, a method is provided that includes rotating the rotor, increasing the current to levitate the rotor and decrease the gap between electromagnet and rotor, and then reducing the current to levitate the rotor with a minimal amount of electric power to the electromagnet.

42 ENGINEERING↗

Evolution of Intergranular Stresses in a Martensitic and an Austenitic NiTi Wire During Loading–Unloading Tensile Deformation

In situ synchrotron X-ray diffraction testing was carried out on a martensitic and an austenitic NiTi wire to study the evolution of internal stresses and the stress-induced martensite (SIM) phase transformation during room temperature tensile deformation. From the point of lattice strain evolution, it is concluded that (1) for the martensitic NiTi wire, detwinning of the [011](B19') type II twins and the {010}(B19') compound twins is responsible for internal strains formed at the early stage of deformation. (2) The measured diffraction moduli of individual martensite families show large elastic anisotropy and strong influences of texture. (3) For the austenitic NiTi wire, internal residual stresses were produced due to transformation-induced plasticity, which is more likely to occur in austenite families that have higher elastic moduli than their associated martensite families. (4) Plastic deformation was observed in the SIM at higher stresses, which largely decreased the lower plateau stresses.

lattice strain↗

Characteristics of Shock-Induced Dust Flux from the Surface of Lead and Copper Samples under Pressure in the Shock Wave of 45–50 GPa with Unloading into Vacuum

The results of experimental studies of the shock-induced particle ejection (“dusting”) from a free rough (R{sub z} = 20) surface of lead and copper samples into an evacuated medium are presented. The experimental methods were based on different physical principles. To determine the size of particles by shadow laser-optical imaging more efficiently, a narrow strip was isolated in the center of the free surface of a sample from which an optically transparent stream of particles was ejected. The rest of the surface, substantially larger in size, ejected particles, parameters of which were reliably recorded using optical heterodyne interferometry detection, radiographic imaging, and piezoelectric techniques. This made it possible to obtain more reliable data on the particle size distribution, the velocity of the front of a particle flux, and the density (weight) distribution of the flow in the direction of its motion, necessary to refine the existing models and create more reliable models to describe the phenomenon. Using lead and copper samples, the material of which melts or does not melt under shock wave loading in selected close conditions (amplitude of the shock wave and roughness of the free surface), made it possible to clearly demonstrate the effect of melting on the qualitative pattern and quantitative characteristics of the shock-induced dusting process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗