Search NASA⌕ Search

SEARCH · Search NASA

Results for “WASTE TRANSPORTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Spacecraft active thermal control subsystem design and operation considerations

Future spacecraft missions will be characterized by high electrical power requiring active thermal control subsystems for acquisition, transport, and rejection of waste heat. These systems will be designed to operate with minimum maintenance for up to 10 years, with widely varying externally-imposed environments, as well as the spacecraft waste heat rejection loads. This paper presents the design considerations and idealized performance analysis of a typical thermal control subsystem with emphasis on the temperature control aspects during off-design operation. The selected thermal management subsystem is a cooling loop for a 75-kWe fuel cell subsystem, consisting of a fuel cell heat exchanger, thermal storage, pumps, and radiator. Both pumped-liquid transport and two-phase (liquid/vapor) transport options are presented with examination of similarities and differences of the control requirements for these representative thermal control options.

Sadunas, J. A.↗
DOE OSTI2020

Flanged Tritium Waste Containers: Background and Current Path to Disposal

The MLLW Flanged Tritium Waste Container (FTWC) Project has been operational since 2007 when, during an audit of the FTWC waste stream, it was determined that four FTWC containers contained lead in amounts greater than LDR treatment standards. From June to August of 2007, four FTWC containers were shipped to TA-54 for disposal as LLW from WETF. The contents of the FTWCs were characterized as high activity LLW and were thought to be in compliance with LANL's Waste Acceptance Criteria (WAC). During the packaging of these FTWC's, 36 intact squib valves (aka actuators), containing detonated squibs were included with the waste stream After being transported to TA-54 Area G, it was determined that the explosive used in some of the squibs was Normal Lead Styphnate (NLS). A recharacterization of the entire contents in the FTWC's was performed with the conclusion that the squib valves exhibited the RCRA toxic characteristic for Lead (D008), thus resulting in the contents of the FTWCs being reclassified as a Mixed LLW.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Implications of Non-Bingham Rheology

One of the key challenges now facing the US Department of Energy (DOE) is the fate of radioactive waste remaining from World War II and the Cold War which is stored underground in tanks some 75 feet in diameter and over 30 feet tall. Over time, the waste has segmented into multiple layers with sludges and slurries at the bottom with salt crust layers often at the top and liquid in between. DOE’s current official baseline plans call for remaining sludges and slurries to be removed from the tanks and converted into a more stable glass waste form. Minimizing worker exposure to radiation drives DOE to use slurry processing techniques to suspend, mobilize, transport, mix, and process the waste. Therefore, a clear and quantitative understanding of Hanford waste rheology is essential for the success of the DOE mission. Historically much of the waste has been characterized using Eugene Bingham’s model more than a century old that provides a straight line fit to higher shear rate data with the intercept suggesting a yield stress and the slope providing the consistency. Yet, Bingham fits overestimate the shear stress at a given shear rate for low to intermediate shear rates, exactly the range of shear rates typically encountered in pipe flow, where shear rates peak along the pipe wall and vanish in the center. This model produces a fictitious yield stress for some of the wastes that do not exhibit yield phenomena. While over estimating the yield stress may be prudent, safe, and conservative for some applications (e.g., pump sizing to ensure that pumps can handle yield stresses), over estimating the rheology may be inaccurate and non-conservative for other applications (e.g., eroding settled particle beds). Therefore, this paper evaluates the slurry rheology of Hanford and Savannah River wastes using a more modern rheological model that fits the full range of experimental data. Although a bias has been recognized and alternative models proposed, the magnitude of this bias and the implications for tank waste have only been qualitatively suggested. The purpose of this paper is to evaluate quantitatively implications of the poor quality of fit between a Bingham model for rheology and experimental data at modest shear rates. We first demonstrate the magnitude of the bias between the data and the Bingham extrapolation. We then evaluate quantitatively the velocity profile under laminar conditions. This analysis shows that the bias may be large (hundreds of percent or more) at modest shear rates and that modest shear rates dominate pipe velocity profiles.

Rheology, Radioactive waste↗
DOE OSTI2020

Issue Resolution During the Development of the Performance Assessment for the Savannah River Site Saltstone Disposal Facility - 20125

In 2019, Savannah River Remediation developed a revision to the performance assessment (PA) on behalf of the U.S. Department of Energy (DOE) Savannah River Operations Office (SR) for the near-surface disposal of low-level waste at the Savannah River Site (SRS) Saltstone Disposal Facility (SDF). Soluble waste from SRS Tank Farms undergoes salt processing to remove cesium and other high-activity constituents. The low-activity decontaminated salt solution (DSS) is then immobilized by mixing it into a cementitious waste form known as saltstone. After mixing, the saltstone is poured into leak-tight concrete vaults, known as saltstone disposal units (SDUs), where the waste form cures. By the time of facility closure, the SDF is expected to consist of 15 SDUs with a combined capacity of 1.06 E+09 L (280 Mgal) of cured saltstone. The facility operates under a Disposal Authorization Statement from DOE and a permit from the South Carolina Department of Health and Environmental Control (SCDHEC). Since the start of operations in 1990, the SDF has received almost 6.7 E+07 L (18 Mgal) of DSS, resulting in the safe disposal of 2.7 E+16 Bq (7.3 E+05 Ci) of activity. Due to the radioactive decay of short-lived contaminants, the total remaining activity in the disposed waste is estimated to be approximately 1.4 E+16 Bq (3.9 E+05 Ci), as of September 2018. The Disposal Authorization Statement requires a demonstration that the system of engineered and natural features of the disposal facility will limit releases from the facility and be protective of human health and the environment for at least the next 1,000 years. The long-term performance of the facility was evaluated under the requirements of the DoE's Radioactive Waste Management Manual (US DOE Manual 435.1-1). Simulations were performed to demonstrate that the disposal facility would meet performance objectives specified in the manual. The evaluation was based on numerical models that simulate the releases of contaminants from the saltstone waste form. Contaminants were transported through groundwater and air pathways to points of assessment to evaluate compliance (i.e., 100 m from the SDUs). In addition, the potential consequences of an inadvertent human intrusion (IHI) were also evaluated. A number of issues were overcome during the development of these simulations. These issues were identified as part of internal technical reviews. Simulations are developed by people and people make mistakes, so the internal technical review process is a vital step in PA development. Specific examples of resolved issues include a unit-conversion error, an inappropriate definition for a model boundary condition, a model time-stepping issue, and an error in the calculation for the buildup of contaminants in soil. Actions taken to address these issues resulted in an improved product with a better supported technical basis and more defensible results. The identification and correction of these issues are discussed. By understanding these issues, model developers and technical reviewers working on PAs in the future may avoid repeating these types of mistakes. Transparency with respect to these mistakes builds trust between waste management sites, regulators, and stakeholders. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Colloid-facilitated transport of 238 Pu, 233 U and 137 Cs through fractured chalk: Laboratory experiments, modelling, and implications for nuclear waste disposal

The influence of montmorillonite colloids on the mobility of 238 Pu, 233 U and 137 Cs through a chalk fracture was investigated to assess the transport potential for radioactive waste. Radioisotopes of each element, along with the conservative tracer tritium, were injected in the presence and absence of montmorillonite colloids into a naturally fractured chalk core. In parallel, batch experiments were conducted to obtain experimental sorption coefficients (K d , mL/g) for both montmorillonite colloids and the chalk fracture material. Breakthrough curves were modelled to determine diffusivity and sorption of each radionuclide to the chalk and the colloids under advective conditions. Uranium sorbed sparingly to chalk (log K d = 0.7 ± 0.2) in batch sorption experiments. 233 U(VI) breakthrough was controlled primarily by the matrix diffusion and sorption to chalk (15 and 25% recovery with and without colloids, respectively). Cesium, in contrast, sorbed strongly to both the montmorillonite colloids and chalk (batch log K d = 3.2 ± 0.01 and 3.9 ± 0.01, respectively). The high affinity to chalk and low colloid concentrations overwhelmed any colloidal Cs transport, resulting in very low 137 Cs breakthrough (1.1–5.5% mass recovery). Batch and fracture transport results, and the associated modelling revealed that Pu migrates both as Pu (IV) sorbed to montmorillonite colloids and as dissolved Pu(V) (7% recovery). Transport experiments revealed differences in Pu(IV) and Pu(V) transport behavior that could not be quantified in simple batch experiments but are critical to effectively predict transport behavior of redox-sensitive radionuclides. Finally, a brackish groundwater solution was injected after completion of the fracture flow experiments and resulted in remobilization and recovery of 2.2% of the total sorbed radionuclides which remained in the core from previous experiments. In general, our study demonstrates consistency in sorption behavior between batch and advective fracture transport. Finally, the results suggest that colloid-facilitated radionuclide transport will enhance radionuclide migration in fractured chalk for those radionuclides with exceedingly high affinity for colloids.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1975

Radioactive waste disposal via electric propulsion

It is shown that space transportation is a feasible method of removal of radioactive wastes from the biosphere. The high decay heat of the isotopes powers a thermionic generator which provides electrical power for ion thrust engines. The massive shields (used to protect ground and flight personnel) are removed in orbit for subsequent reuse; the metallic fuel provides a shield for the avionics that guides the orbital stage to solar system escape. Performance calculations indicate that 4000 kg. of actinides may be removed per Shuttle flight. Subsidiary problems - such as cooling during ascent - are discussed.

Burns, R. E.↗
DOE OSTI2020

NA-22 Quarterly Report: April-June, 2020

At LLNL we contribute to two projects in NNSA-IAEC Science and Technology Working Group Area V: Basic Science of Waste Management & Subsurface Science. The motivation behind Topic Area V is to evaluate the scientific and safety case for an intermediate borehole to house Israel’s nuclear waste. WM1 (SNL lead) is Thermomechanical Damage (initially called Damage Accumulation and Wellbore Stability). This work focuses on evaluating the damage to the host rock induced by excavation and heat released from a possible radioactive waste repository/borehole. WM2 (LLNL lead) is Radionuclide Facilitated Transport in Carbonate Rock (initially called Colloidal Transport of Radionuclides). This work focuses on better understanding the transport of radionuclides and colloids from a nuclear waste repository/borehole in a vadose zone environment through experimentation and modeling. In the second quarter (this report) our work has been delayed in part due to COVID-19. LLNL went into shelter in place (SIP), minimum safe operations mid-March. Operations at LLNL have been slowly ramping up with 50% of the workforce back onsite in limited capacity and telecommuting widely used. The good news is that our labs opened up the last week in June and experiments are expected to start up again for WM2 Radionuclide Facilitated Transport in July. LLNL’s contribution to WM1 Thermochemical Damage modeling efforts also started back up in late June. We expect to be able to catch up on much of our work by the end of next quarter. The three national laboratories communication on a bi-monthly basis to make sure Area V projects remain on track and we have a monthly conference call with our Israeli counterparts to make sure we are communicating priorities and coordinating project details.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

NA-22 Quarterly Report: April-June, 2020

At LLNL we contribute to two projects in NNSA-IAEC Science and Technology Working Group Area V: Basic Science of Waste Management & Subsurface Science. The motivation behind Topic Area V is to evaluate the scientific and safety case for an intermediate borehole to house Israel’s nuclear waste. WM1 (SNL lead) is Thermomechanical Damage (initially called Damage Accumulation and Wellbore Stability). This work focuses on evaluating the damage to the host rock induced by excavation and heat released from a possible radioactive waste repository/borehole. WM2 (LLNL lead) is Radionuclide Facilitated Transport in Carbonate Rock (initially called Colloidal Transport of Radionuclides). This work focuses on better understanding the transport of radionuclides and colloids from a nuclear waste repository/borehole in a vadose zone environment through experimentation and modeling. In the second quarter (this report) our work has been delayed in part due to COVID-19. LLNL went into shelter in place (SIP), minimum safe operations mid-March. Operations at LLNL have been slowly ramping up with 50% of the workforce back onsite in limited capacity and telecommuting widely used. The good news is that our labs opened up the last week in June and experiments are expected to start up again for WM2 Radionuclide Facilitated Transport in July. LLNL’s contribution to WM1 Thermochemical Damage modeling efforts also started back up in late June. We expect to be able to catch up on much of our work by the end of next quarter. The three national laboratories communication on a bi-monthly basis to make sure Area V projects remain on track and we have a monthly conference call with our Israeli counterparts to make sure we are communicating priorities and coordinating project details.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Packaging and Transportation Regulatory Inconsistencies and Challenges - 20485

This paper presents regulatory inconsistencies within and between various regulatory agencies. These inconsistencies relate to the packaging and transportation of radioactive materials typically encountered during decommissioning including mixed wastes that are required to be compliant with more than one regulatory agency during shipment. At least one possible solution is presented for consideration. The following four examples are presented: - Packaging discrepancies for radioactive material meeting the DOT definition of Radioactive LSA-I that also contain lead may be compliant when shipped unpackaged per Department of Transportation (DOT) rules in 173.427 paragraph C. However, since they contain lead, they are required to be shipped in a package per the Environmental Protection Agency (EPA) Hazardous Waste Manifest (HWM) instructions. - The difference between the units of measure used in 49 CFR Part 172.101 Appendix A and 40 CFR, Part 355, Appendices A and B. - The requirement for outer packaging for radioactive gauges meeting all other requirements of 49 CFR 173.424 and 173.425. - E-Manifesting EPA system difficult for waste materials containing both radioactive class 7 and PCBs. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

A systematic exploration of the hydrolysis products of the uranium trioxide polymorphs and their optical vibrational spectra

Study of the uranium trioxide (UO 3 )-water system is complex with inconclusive results and limited details in the literature. The UO 3 system is home to at least seven structural polymorphs and an amorphous phase. The proposed hydrolysis products of UO 3 are just as numerous, yet investigations of these alteration products are sporadic and generally antiquated, thus requiring systematic investigations. Recent developments in the understanding of UO 3 phase space, aided by improvements in analytical and computational techniques, necessitate more modern investigations into the uranyl hydroxide family and their naturally occurring mineral counterparts. We present findings from a systematic investigation of the products formed via hydrothermal reactions of common UO 3 polymorphs and discuss how the equatorial coordination of the uranyl/uranyl-like ions within the UO 3 precursors leads to differences in the optical vibrational spectra of the resulting hydrolysis products. The hypo-stochiometric nature of α-UO 2 (OH) 2 allows for the formation of multiple unique uranyl sites and a distortion of the unit cell to a lower symmetry. This study provides, for the first time, an analysis of β-UO 2 (OH) 2 using modern techniques and instrumentation (Raman/infrared spectroscopy and powder x-ray diffraction) and lays a foundation for future time-dependent investigations into the structural dependence of the hydrolysis kinetics of the UO 3 phases. In conclusion, given the prevalence of UO 3 at both ends of the nuclear fuel cycle, an understanding of its behavior with water has applications ranging from nuclear forensics to waste management and environmental transport.

Uranium trioxide↗
DOE OSTI2025

Unimodal Imaging of Monovalent Metal-Chelator Complexes and Lipids by MALDI Imaging Mass Spectrometry

Careful regulation of monovalent metal ions (M + ) is necessary to maintain a functional cellular system. Of these ions, appropriate sodium (Na + ) and potassium (K + ) concentrations are particularly integral for electrochemical signaling, as well as the secondary transport of nutrients and waste. Dysregulation of M + homeostasis can disrupt these mechanisms, potentially influencing the metabolism of downstream biomolecules such as lipids. Thus, the relationship between M + abundances and related biomolecular distributions must be elucidated to better understand the physiology of healthy and disordered tissues. Traditional techniques for imaging biological metal distributions include SIMS, LA-ICP-MS, and XRF; however, these capabilities are limited to elemental analysis or the analysis of molecular fragments and must be paired with other modalities to visualize distributions of more complex biomolecules within the same or similar samples. Conversely, matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI IMS) is a powerful tool often used for mapping such biomolecular distributions, but current methods are unable to detect metals within tissue. This study illustrates a novel methodology that adds metal detection to the MALDI IMS repertoire through which the simultaneous detection of M + metals and lipids is achievable. Using a robotic sprayer for homogeneous application, on-tissue deposition of the chelator deferiprone (DEF) enables subsequent detection of the ionizable metal-chelator complex by MALDI without hindering lipid detection. Our work provides proof-of-concept data for the simultaneous detection of K + , Na + , and intact lipids using MALDI IMS.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Improving Zr cross sections: 90 Zr(n, y) [Slides]

This presentation covers key take-aways such as the first of 4 isotopes (90,91,92,94) to be measured. 91 Zr is currently being measured at GELINA. Once all measurements are done a join evaluation with SAMMY will be undertaken. Further, there will be production of new evaluated resonance parameters and covariances. New data will be used to improve evaluation information, benefitting transport calculations of reactors, waste storage, etc.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Aggregating in vitro-grown adipocytes to produce macroscale cell-cultured fat tissue with tunable lipid compositions for food applications

We present a method of producing bulk cell-cultured fat tissue for food applications. Mass transport limitations (nutrients, oxygen, waste diffusion) of macroscale 3D tissue culture are circumvented by initially culturing murine or porcine adipocytes in 2D, after which bulk fat tissue is produced by mechanically harvesting and aggregating the lipid-filled adipocytes into 3D constructs using alginate or transglutaminase binders. The 3D fat tissues were visually similar to fat tissue harvested from animals, with matching textures based on uniaxial compression tests. The mechanical properties of cultured fat tissues were based on binder choice and concentration, and changes in the fatty acid compositions of cellular triacylglyceride and phospholipids were observed after lipid supplementation (soybean oil) during in vitro culture. This approach of aggregating individual adipocytes into a bulk 3D tissue provides a scalable and versatile strategy to produce cultured fat tissue for food-related applications, thereby addressing a key obstacle in cultivated meat production.

Yuen Jr, John Se Kit (ORCID:0000000198541654)↗
NASA NTRS1974

Integrated pneumatic transporter-incinerator-afterburner subsystem development

The design and fabrication of a prototype automatic transport system to move wastes to an incinerator onboard a spacecraft are described. The commode and debris collector, subsystems to treat noncondensible gases, oxygen supply to incinerator and afterburner, and removal and ash collection from the incinerator are considered, as well as a zero gravity condenser. In-depth performance testing of a totally integrated incineration system and autoclaving as a waste treatment method are included.

Manning, J. R.↗
NASA NTRS1980

Orbiter integrated active thermal control subsystem test

Integrated subsystem level testing of the systems within the orbiter active thermal chamber capable of simulating ground, orbital, and entry temperature and pressure profiles. The test article was in a closed loop configuration that included flight type and functionally simulated protions of all ATCS components for collecting, transporting, and rejecting orbiter waste heat. Specially designed independently operating equipment simulated the transient thermal input from the cabin, payload, fuel cells, freon cold plates, hydraulic system, and space environment. Test team members using data, controls, and procedures available to a flight crew controlled the operation of the ATCS. The ATCS performance met or exceeded all thermal and operational requirements for planned and contingency mission support.

Jaax, J. R.↗
NASA NTRS1983

Concept evaluation of four thermal utility systems for low orbit spacecraft

Attention is given to the design features and comparative performance of four two-phase heat transport systems under consideration by NASA as long term space mission devices for the collection, transportation and rejection of waste heat from spacecraft components over the zero-100 C temperature range. The system types are: a mechanically pumped two-phase loop, a capillary pumped loop, an osmotic pumped loop, and a loop employing a biomorph pump. The principal advantage of a capillary pumped loop is that it is a passive system with few moving parts that inherently possesses high reliability. The working fluid recommended for use in such a thermal utility is NH3, which has the requisite combination of high latent heat of vaporization and high surface tension.

Peterson, G. P.↗