Search NASA⌕ Search

SEARCH · Search NASA

Results for “WAVE INTERACTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Laboratory studies of wave-current interaction - Kinematics of the strong interaction

Controlled laboratory experiments have been conducted to study the kinematics of wave-current interactions. The results confirm the conservation of waves under the steady state condition. The data also show that the kinematic effect of the current on waves can be treated as a simple Doppler shift. After the Doppler correction, the kinematics of the waves (either breaking or nonbreaking) follow the linear theory very well.

Lai, Ronald J.↗
NASA NTRS1992

Three-dimensional shock-wave/boundary-layer interactions with bleed through a circular hole

Computations were performed to study three-dimensional (3-D), shock-wave/boundary-layer interactions on a flat plate in which fluid in the boundary layer was bled through a circular hole into a plenum to control shock-wave induced separation. Results are presented which show the details of the 3-D flowfield about the bleed hole and how bleed-hole placement relative to shock-wave impingement affect upstream, spanwise, and downstream influence lengths. This study revealed an underlying mechanisms by which bleed holes can affect shock-wave/boundary-layer interactions. This investigation is based on the ensemble-averaged, "full-compressible" Navier-Stokes equations closed by the Baldwin-Lomax turbulence model. Solutions to these equations were obtained by an implicit finite-volume method based on the partially-split, two-factored algorithm of Steger.

Rimlinger, M. J.↗
NASA NTRS2000

Laboratory Study of Water Surface Roughness Generation by Wave-Current Interaction

Within the framework of this project, the blocking of waves by inhomogeneous currents was studied. A laboratory experiment was conducted in collaboration with Steven R. Long at the linear wave tank of the NASA Air-Sea Interaction Facility, Wallops Island, VA during May 1999. Mechanically-generated waves were blocked approximately 3m upstream from the wave paddle by an opposing current. A false bottom was used to obtain a spatially varying flow field in the measurement section of the wave tank. We used an imaging slope gauge, which was mounted directly underneath the sloping section of the false tank bottom to observe the wave field. For a given current speed, the amplitude and the frequency of the waves was adjusted so that the blocking occurred within the observed footprint. Image sequences of up to 600 images at up 100 Hz sampling rate were recorded for an area of approximately 25cm x 25cm. Unlike previous measurements with wave wire gauges, the captured image sequences show the generation of the capillary waves at the blocking point and give detailed insight into the spatial and temporal evolution of the blocking process. The image data were used to study the wave-current interaction for currents from 5 to 25 cm/s and waves with frequencies between 1 and 3 Hz. First the images were calibrated with regard to size and slope. Then standard Fourier techniques as well the empirical mode decomposition method developed by Dr. Norden Huang and Dr. Steven R. Long were employed to quantify the wave number downshift from the gravity to the capillary regime.

Klinke, Jochen↗
DOE OSTI2026

Quantitative analysis of zonal flow influence on turbulent plasmas driven by trapped electrons

The role of zonal flow (ZF) in the turbulence saturation of trapped electron modes (TEM) in magnetically confined plasmas is revisited. Here, in this study, we examine ZF excitation and saturation mechanisms in TEM turbulence using detailed free-energy transfer diagnostics from nonlinear gyrokinetic simulations. When the ion channel becomes subdominant, electrons shift to transferring energy to the zonal component, which results in zonal flows always playing a significant though subdominant role, in the case of the temperature gradient driven TEM. The velocity-space structure of energy transfer reveals that trapped electrons directly couple to ZF. Regarding the saturation physics, the zonal flow advection, drift-wave–drift-wave interactions, and stable modes at the pump waves are compared. When ZF saturation is weak, drift-wave–drift-wave interactions play a larger role in maintaining turbulence saturation. The findings elucidate the roles of nonzonal to zonal flow coupling, stable modes, and nonzonal wave-wave interactions, and provide a basis for improving reduced models of turbulent transport.

Song, Jiheon [Hanyang University, Seoul (Korea, Re↗
NASA NTRS1994

Numerical Simulation of Inlet Bleed with Circular Holes on Plate Under Shock-Wave/Boundary-Layer Interactions

A numerical study was performed to investigate the shock-wave/boundary-layer interactions on a flat plate with bleed through one or more circular holes that vent into a plenum. The bleed-hole patterns considered for the study include in-line multiple holes and staggered multiple-row holes that are configured to simulate the patterns used in inlet bleed systems of high performance aircraft. The focus of the study was to examine how the bleed through multiple holes affect bleed rate and the pressure and Mach number distributions. Since the bleed performance was found sensitive to the change in bleed conditions, a computational procedure was developed to give a good turnaround computational time for parametric studies involving changes in bleed hole geometry and the structure of shock-wave/boundary-layer flowfield. The procedure includes the grid-generation methodology and the flow simulation with solutions from the Navier-Stokes equations. The computational techniques permit analysis of complex bleed systems and make possible the investigation of a broader range of design variables associated with inlet bleed operation.

Chyu, Wei J.↗
NASA NTRS1972

Whistler side-band growth due to nonlinear wave-particle interaction.

The distortion caused by a large-amplitude whistler (with wave normal parallel to the static magnetic field) on the energetic-electron velocity distribution of a predominantly cold magnetoplasma is derived analytically. Whistler test waves impressed on the perturbed magnetoplasma and within two narrow bands centered on the frequency of the original wave may experience large consecutive growth at the early stages of the wave-particle interaction if the unperturbed energetic-electron distribution satisfies two specified conditions. The relevance of these whistler side bands to magnetospheric phenomena is assessed; in particular, an identification of the onset of artificially stimulated emissions with the creation of whistler side bands gives good agreement with observations.

Brinca, A. L.↗
NASA NTRS1976

Magnetospheric dynamics and wave-particle interactions

It has been demonstrated that two general classes of wave-particle interactions are of great importance for magnetospheric dynamics. Electromagnetic and electrostatic plasma instabilities give rise to relatively narrow-banded spontaneous emissions (e.g., ELF hiss, chorus, three-halves noise, ion cyclotron and ion-plasma-frequency turbulence) that can scatter trapped particles into the loss cone, leading to modified pitch-angle distributions, stable trapping limits, diffuse aurora, proton precipitation events, etc. The current-driven plasma instabilities give rise to impulsive ion acoustic or Buneman mode turbulence that provides very effective energy transfer (via the anomalous conductivity mechanism) at the bow shock and in regions where strong field-aligned currents are observed. We review these interactions and identify significant open questions that must be investigated during the IMS.

Scarf, F. L.↗
NASA NTRS1977

Wave-particle interaction phenomena associated with shocks in the solar wind

Microscopic wave-particle interaction phenomena must generally affect the evolution of a traveling interplanetary discontinuity such as a collisionless shock, and solar wind plasma instabilities should also be associated with interplanetary acceleration, diffusion, and dissipation. Recent local measurements from diagnostics on widely separated spacecraft illustrate some examples of these interaction phenomena, and two bounding cases are considered in detail here. It is shown that the interplanetary shock of September 14, 1974 (detected on IMP-7, 8, Hawkeye-1, and Pioneer 11) was associated with intense local electrostatic noise and ion acceleration, while the shock of January 6, 1975 (detected on IMP-7 and Helios-1) had no detectable electrostatic turbulence.

Scarf, F. L.↗
NASA NTRS1993

Effects of bleed-hole geometry and plenum pressure on three-dimensional shock-wave/boundary-layer/bleed interactions

A numerical study was performed to investigate 3D shock-wave/boundary-layer interactions on a flat plate with bleed through one or more circular holes that vent into a plenum. This study was focused on how bleed-hole geometry and pressure ratio across bleed holes affect the bleed rate and the physics of the flow in the vicinity of the holes. The aspects of the bleed-hole geometry investigated include angle of bleed hole and the number of bleed holes. The plenum/freestream pressure ratios investigated range from 0.3 to 1.7. This study is based on the ensemble-averaged, 'full compressible' Navier-Stokes (N-S) equations closed by the Baldwin-Lomax algebraic turbulence model. Solutions to the ensemble-averaged N-S equations were obtained by an implicit finite-volume method using the partially-split, two-factored algorithm of Steger on an overlapping Chimera grid.

Chyu, Wei J.↗
NASA NTRS1994

Skin-Friction Measurements in a 3-D, Supersonic Shock-Wave/Boundary-Layer Interaction

The experimental documentation of a three-dimensional shock-wave/boundary-layer interaction in a nominal Mach 3 cylinder, aligned with the free-stream flow, and 20 deg. half-angle conical flare offset 1.27 cm from the cylinder centerline. Surface oil flow, laser light sheet illumination, and schlieren were used to document the flow topology. The data includes surface-pressure and skin-friction measurements. A laser interferometric skin friction data. Included in the skin-friction data are measurements within separated regions and three-dimensional measurements in highly-swept regions. The skin-friction data will be particularly valuable in turbulence modeling and computational fluid dynamics validation.

Wideman, J. K.↗
NASA NTRS1972

Sideband growth in nonlinear Landau wave-particle interaction.

The distortion of the electron velocity distribution caused by a large amplitude Landau wave is determined analytically for the initial-value problem. The resulting stability of electrostatic perturbations impressed on the evolving plasma is studied. Narrow sidebands of the applied frequency experience consecutive growths of large magnitude during the early stages of the nonlinear wave-particle interaction. The significance of the derived results to both wave propagation experiments and triggered VLF emissions in the magnetosphere is discussed.

Brinca, A. L.↗
NASA NTRS1986

The PROUST radar: First results

Two campaigns took place in 1984 with the PROUST Radar operating in a bistatic mode, the transmitting antenna pointing at the vertical and the receiving one, 1 deg. off the vertical axis. The antenna beam intersection covers an altitude range between 3 and 9 km. The first of these campaigns are analyzed. The results analyzed show the capability of the PROUST Radar to measure the turbulent parameters and study the turbulence-wave interaction. In its present configuration (bistatic mode and 600 m vertical resolution), it has been necessary to make some assumptions that are known not to be truly fulfilled: homogeneous turbulence and constant vertical wind intensity over a 600-m thickness. It is clear that a more detailed study of the interaction between wave and turbulence will be possible with the next version of PROUST Radar (30-m altitude resolution and monostatic mode) that will soon be achieved.

Bertin, F.↗
NASA NTRS1986

Interferometric data for a shock-wave/boundary-layer interaction

An experimental study of the axisymmetric shock-wave / boundary-layer strong interaction flow generated in the vicinity of a cylinder-cone intersection was conducted. The study data are useful in the documentation and understanding of compressible turbulent strong interaction flows, and are part of a more general effort to improve turbulence modeling for compressible two- and three-dimensional strong viscous/inviscid interactions. The nominal free stream Mach number was 2.85. Tunnel total pressures of 1.7 and 3.4 atm provided Reynolds number values of 18 x 10(6) and 36 x 10(6) based on model length. Three cone angles were studied giving negligible, incipient, and large scale flow separation. The initial cylinder boundary layer upstream of the interaction had a thickness of 1.0 cm. The subsonic layer of the cylinder boundary layer was quite thin, and in all cases, the shock wave penetrated a significant portion of the boundary layer. Owing to the thickness of the cylinder boundary layer, considerable structural detail was resolved for the three shock-wave / boundary-layer interaction cases considered. The primary emphasis was on the application of the holographic interferometry technique. The density field was deduced from an interferometric analysis based on the Able transform. Supporting data were obtained using a 2-D laser velocimeter, as well as mean wall pressure and oil flow measurements. The attached flow case was observed to be steady, while the separated cases exhibited shock unsteadiness. Comparisons with Navier-Stokes computations using a two-equation turbulence model are presented.

Dunagan, Stephen E.↗
NASA NTRS2015

CFD Validation Experiment of a Mach 2.5 Axisymmetric Shock-Wave/Boundary-Layer Interaction

Experimental investigations of specific flow phenomena, e.g., Shock Wave Boundary-Layer Interactions (SWBLI), provide great insight to the flow behavior but often lack the necessary details to be useful as CFD validation experiments. Reasons include: 1.Undefined boundary conditions Inconsistent results 2.Undocumented 3D effects (CL only measurements) 3.Lack of uncertainty analysis While there are a number of good subsonic experimental investigations that are sufficiently documented to be considered test cases for CFD and turbulence model validation, the number of supersonic and hypersonic cases is much less. This was highlighted by Settles and Dodsons [1] comprehensive review of available supersonic and hypersonic experimental studies. In all, several hundred studies were considered for their database.Of these, over a hundred were subjected to rigorous acceptance criteria. Based on their criteria, only 19 (12 supersonic, 7 hypersonic) were considered of sufficient quality to be used for validation purposes. Aeschliman and Oberkampf [2] recognized the need to develop a specific methodology for experimental studies intended specifically for validation purposes.

Turbulence Modeling↗