Search NASA⌕ Search

SEARCH · Search NASA

Results for “WAVEGUIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Single-polarization hollow-core square photonic bandgap waveguide

Materials with a periodic structure have photonic bandgaps (PBGs), in which light can not be guided within certain wavelength ranges; thus light can be confined within a low-index region by the bandgap effect. In this paper, rectangular-shaped hollow waveguides having waveguide-walls (claddings) using the PBG have been discussed. The design principle for HE modes of hollow-core rectangular PBG waveguides with a Bragg cladding consisting of alternating high- and low-index layers, based on a 1D periodic multilayer approximation for the Bragg cladding, is established and then a novel single-polarization hollow-core square PBG waveguide using the bandgap difference between two polarized waves is proposed. Our results demonstrated that a single-polarization guiding can be achieved by using the square Bragg cladding structure with different layer thickness ratios in the mutually orthogonal directions and the transmission loss of the guided mode in a designed hollow-core square PBG waveguide is numerically estimated to be 0.04 dB/cm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface waves at the boundary of a system of coupled waveguides

Experimental investigations of surface waves at the interface between a homogeneous medium and a periodically stratified medium representing a restricted system of coupled waveguides are analysed. It is found that in all cases of the observation of surface waves a restricted system of waveguides has its own spectrum of guided modes and the spectrum of leaky modes, which become the surface waves of the system. It is shown that when two surface waves are used in a biosensor scheme, they should be realised as leaky modes of a Bragg waveguide in which a periodic system of waveguides was used as a distributed Bragg mirror of this waveguide. It is pointed out that the prism method of excitation of surface waves can be used in sensors, where these waves are employed as a detecting tool. (special issue devoted to the 25th anniversary of the a.m. prokhorov general physics institute)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thin heterogeneous optical silicon-on-insulator waveguides and their application in reconfigurable optical multiplexers

A new type of optical waveguides in silicon-on-insulator (SOI) nanostructures is proposed and studied. Their optical properties and the possibility of their application in tunable optical filters and reconfigurable multiplexers are discussed based on the results of numerical simulation by the BPM and FDTD methods. A new design of heterogeneous waveguide structures containing additional regions with a high concentration of free charge carriers in the form of a p-n junction, which are located at the edges of a multimode strip waveguide (the cross section of the silicon core being {approx}0.22x35 {mu}m), is proposed. This doping provides single-mode behaviour of the heterogeneous waveguide due to low optical losses in the fundamental mode and to enhanced losses in highest modes. Heterogeneous waveguides can be used for the fabrication of different photonic elements including new types of tunable optical filters and reconfigurable multiplexers based on the multireflection technology. (integral-optical elements)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Calculation of the frequency band of a Bragg waveguide

Transmission regions of the silica-core Bragg optical waveguides are analysed. It is shown that a relatively small decrease in the refractive index of the core allows one to narrow down the waveguide transmission region so that to suppress in the spectrum the undesirable emission line propagating in the waveguide, thus ensuring a minimal loss of the fundamental mode at the working wavelength. The example of calculations of a frequency filter based on a Bragg optical fibre is considered, in which the fundamental mode has minimal losses at 0.925 {mu}m but completely suppressed at 1.06 {mu}m. The loss spectrum of a Bragg waveguide and the field distribution of the fundamental mode are presented. (optical waveguides and fibres)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure of modes of a smoothly irregular integrated-optical four-layer three-dimensional waveguide

The asymptotic method and the method of coupled waves used to study an integrated-optical multilayer three-dimensional waveguide satisfying the conditions of a continuously variable effective refractive index are considered. Three-dimensional fields of smoothly deforming modes of a four-layer integrated-optical waveguide are described analytically. Explicit dependences of the contributions of the first order of smallness to the electric and magnetic field amplitudes of quasi-waveguide modes are obtained. The canonical type of quasi-wave equations describing the structure of quasi-TE and quasi-TM modes in a smoothly irregular four-layer integrated-optical three-dimensional waveguide is presented for the asymptotic method. By using the perturbation theory, shifts of complex propagation constants are obtained in an explicit form for these modes. The elaborated theory can be used to analyse structures from dielectric, magnetic and metamaterials in a rather broad wavelength range of electromagnetic waves. (waveguides. optical fibres)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of light propagation for a crossing of thin silicon wires using vertical tunnelling coupling with a thick optical channel waveguide

Using silicon photonic wires in a silicon-on-insulator structure as an example, we examine the problem of crossings of thin, high-index-contrast channel waveguides. To ensure high optical wave transmission efficiency at as low a level of parasitic scattering as possible, we propose using a structure with vertical coupling between a thin tapered silicon waveguide and a thick polymer waveguide, separated by a thin buffer oxide layer. Numerical simulation is used to find conditions under which such a structure (3 × 90 μm in dimensions) ensures 98 % and 99 % transmission efficiency at ∼1.55 μm in 35- and 26-nm spectral ranges, respectively, for direct propagation and 99.99 % transmission in the transverse direction. The optical element in question is proposed for use in optical microchips with multiple channel waveguide crossings. (integrated optical waveguides)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nonlinear waves in an array of zigzag waveguides with alternating positive and negative refractive indices

Interaction of coupled waves propagating in a system of waveguides with alternating positive and negative refractive indices is studied theoretically. The zigzag configuration of the waveguides in the array allows communication not only between the nearest neighbours, but also with the waveguides beyond them. It is shown that the spectrum of linear waves in such a waveguide system has a bandgap. Partial solutions are found to the system of coupled waves corresponding to a stationary electromagnetic field pulse that propagates along the array of tunnel-coupled waveguides as a whole. Investigation of the interaction of nonlinear solitary waves has demonstrated numerically the stability of their relatively weak disturbances and collisions with each other. (nanogradient dielectric coatings and metamaterials)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Modulation instability in a zigzag array of nonlinear waveguides with alternating positive and negative refractive indices

The modulation instability is analytically investigated in a zigzag array of tunnel-coupled optical waveguides with alternating refractive indices and Kerr nonlinearity. Particular solutions to a system of coupled nonlinear equations are found. They describe the propagation of electromagnetic waves that are uniform along the waveguide and their instability is studied. It is shown that the coupling coefficient between the waveguides, which are non-nearest neighbours, has a significant effect on the instability of the waves in question. When the coupling coefficient exceeds a certain threshold, the modulation instability disappears regardless of the radiation power. The influence of the ratio of the wave amplitudes in adjacent waveguides to the instability of the particular solutions is studied. Different variants of the nonlinear response in waveguides are considered. The studies performed present a new unusual type of the modulation instability in nonlinear periodic systems. (metamaterials)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Modes of a nonlinear planar waveguide with a dielectric layer immersed in a hyperbolic medium

The guided waves of a symmetric planar waveguide formed by an isotropic dielectric placed in a hyperbolic medium and having a cubic-nonlinear response are studied theoretically. The optical axis of the hyperbolic medium is directed along the normal to the interfaces between the media. If the permittivity of the waveguide core exceeds the main permittivity for an extraordinary wave in the hyperbolic medium, then each TM mode is characterised by two cut-off frequencies. Dispersion relations for these modes are found in the case of focusing and defocusing core media. The number of the modes possible at a given frequency depends on the radiation intensity. It is shown that zero values of the mode propagation constants are possible in the waveguide, which corresponds to the formation of a standing wave between the boundaries of the waveguide. In addition, in the case of a defocusing waveguide layer, such stopped modes can be obtained with increasing field intensity. The dependences of the propagation constant and the width of the transverse distribution of the mode field on the radiation intensity are found and analysed. (integrated optics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coherent all-optical switching by resonant quantum-dot distributions in photonic band-gap waveguides

We study the detailed propagative characteristics of optical pulses in photonic band-gap (PBG) waveguides, coupled near resonantly to inhomogeneously broadened distributions of quantum dots. The line centers of the quantum-dot (QD) distributions are placed near a sharp discontinuity in the local electromagnetic density of states. Using finite-difference time-domain (FDTD) simulations of optical pulse dynamics and independent QD susceptibilities associated with resonance fluorescence, we demonstrate subpicosecond switching from pulse absorption to pulse amplification using steady-state optical holding and gate fields with power levels on the order of 1 milliwatt. In the case of collective response of QDs within the periodic dielectric microstructure, the gate power level is reduced to 200 microwatt for room temperature operation. In principle, this enables 200 Gbits per second optical information processing at wavelengths near 1.5 microns in various wavelength channels. The allowed pulse bandwidth in a given waveguide channel exceeds 0.5 THz allowing switching of subpicosecond laser pulses without pulse distortion. The switching contrast from absorption to gain is governed by the QD oscillator strength and dipole dephasing time scale. We consider dephasing time scales ranging from nanoseconds (low-temperature operation) to one picosecond (room-temperature operation). This all-optical transistor action is based on simple Markovian models of single-dot and collective-dot inversion and switching by coherent resonant pumping near the photon density of states discontinuity. The structured electromagnetic vacuum is provided by two-mode waveguide architectures in which one waveguide mode has a cutoff that occurs, with very large Purcell factor, near the QDs resonance, while the other waveguide mode exhibits nearly linear dispersion for fast optical propagation and modulation. Unlike optical switching based on Kerr nonlinearities in an optical cavity resonator, switching power levels and switching speeds for our QD device are not inversely proportional to cavity quality factors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Condensation and thermalization of classsical optical waves in a waveguide

We consider the long-term evolution of a random nonlinear wave that propagates in a multimode optical waveguide. The optical wave exhibits a thermalization process characterized by an irreversible evolution toward an equilibrium state. The tails of the equilibrium distribution satisfy the property of energy equipartition among the modes of the waveguide. As a consequence of this thermalization, the optical field undergoes a process of classical wave condensation, which is characterized by a macroscopic occupation of the fundamental mode of the waveguide. Considering the nonlinear Schroedinger equation with a confining potential, we formulate a wave turbulence description of the random wave into the basis of the eigenmodes of the waveguide. The condensate amplitude is calculated analytically as a function of the wave energy, and it is found in quantitative agreement with the numerical simulations. The analysis reveals that the waveguide configuration introduces an effective physical frequency cutoff, which regularizes the ultraviolet catastrophe inherent to the ensemble of classical nonlinear waves. The numerical simulations have been performed in the framework of a readily accessible nonlinear fiber optics experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generation of Intense Low-Divergence Isolated Soft-X-Ray Attosecond Pulses in a Gas-Filled Waveguide Using Three-Color Synthesized Laser Pulses

Isolated attosecond pulses (IAPs) in the soft-x-ray (SXR) region have been successfully produced via high-order harmonic generation in a gas medium at several laboratories, but pulse energies are much lower compared to the IAPs in the extreme ultraviolet. Here, we show that in a gas-filled hollow waveguide, an efficient gating method using a few-cycle three-color synthesizer is able to generate stronger SXR IAPs. We show that an 104-as IAP in the SXR region (central energy of 210 eV) with a higher pulse energy (0.9 nJ) and a lower divergence (within 1.5 mrad) can be generated with a three-color laser beam for input pulse energy at 0.62 mJ, under the condition of optimal gas pressure and waveguide length. The enhancement of the IAP is attributed to favorable phase matching of SXR high harmonics caused by the evolution of the three-color waveform during its propagation in the waveguide, which can be understood by analyzing the time shift of the waveform due to the interplay of the waveguide mode, atomic dispersion, and plasma dispersion. We check that the gating method is quite robust with respect to the phase jitter in the waveform. The advantage of this method is further demonstrated by comparing the generation of SXR high harmonics and attosecond pulses with two other schemes: the three-color waveform in a gas cell and a previously optimized two-color waveform in a gas-filled waveguide.

74 ATOMIC AND MOLECULAR PHYSICS↗

Super Subwavelength Guiding and Rejecting of Terahertz Spoof SPPs Enabled by Planar Plasmonic Waveguides and Notch Filters Based on Spiral-Shaped Units

In this study, we numerically simulate novel planar plasmonic waveguides and notch filters with excellent guiding and rejection of terahertz (THz) waves with super subwavelength confinement. Our design is based on spoof surface plasmon polaritons-surface plasmon polaritons with a frequency that has been tuned using patterned conductive surfaces. We find that by using patterns of periodically arranged spiral-shaped units, the dispersion characteristics can be engineered at will by tuning the parameters of the spirals. We find that the resulting plasmonic waveguides have much lower asymptotic frequencies and much tighter terahertz field confinement when compared with conventional rectangular-grooved plasmonic waveguides. We show it is possible to design a structure with lateral dimensions that are only 25% the size of the conventional spoof surface plasmon polariton waveguides but with the same asymptotic frequency. Finally, we combined this architecture with broadband couplers to design an ultrawideband low-pass filter with sharp roll-off (cut-off frequency at 1.29 THz) and low insertion loss (<;3 dB). Furthermore, by introducing double ring resonators based on spiral-shaped units, a planar plasmonic notch filter with rejection of more than 17 dB between 0.97 and 0.99 THz is demonstrated. Finally, the proposed waveguides and notch filters may have great potential applications in the promising terahertz integrated plasmonic circuits and systems.

42 ENGINEERING↗

Waveguide detuning caused by transverse magnetic fields on a simulated in-line 6 MV linac

Purpose: Due to the close proximity of the linear accelerator (linac) to the magnetic resonance (MR) imager in linac-MR systems, it will be subjected to magnet fringe fields larger than the Earth's magnetic field of 5x10{sup -5} T. Even with passive or active shielding designed to reduce these fields, some magnitude of the magnetic field is still expected to intersect the linac, causing electron deflection and beam loss. This beam loss, resulting from magnetic fields that cannot be eliminated with shielding, can cause a detuning of the waveguide due to excessive heating. The detuning, if significant, could lead to an even further decrease in output above what would be expected strictly from electron deflections caused by an external magnetic field. Thus an investigation of detuning was performed through various simulations. Methods: According to the Lorentz force, the electrons will be deflected away from their straight course to the target, depositing energy as they impact the linac copper waveguide. The deposited energy would lead to a heating and deformation of the copper structure resulting in resonant frequency changes. PARMELA was used to determine the mean energy and fraction of total beam lost in each linac cavity. The energy deposited into the copper waveguide from the beam losses caused by transverse magnetic fields was calculated using the Monte Carlo program DOSRZnrc. From the total energy deposited, the rise in temperature and ultimately the deformation of the structure was estimated. The deformed structure was modeled using the finite element method program COMSOL MULTIPHYSICS to determine the change in cavity resonant frequency. Results: The largest changes in resonant frequency were found in the first two accelerating cavities for each field strength investigated. This was caused by a high electron fluence impacting the waveguide inner structures coupled with their low kinetic energies. At each field strength investigated, the total change in accelerator frequency was less than a manufacturing tolerance of 10 kHz and is thus not expected to have a noticeable effect on accelerator performance. Conclusions: The amount of beam loss caused by magnetic fringe fields for a linac in a linac-MR system depends on the effectiveness of its magnetic shielding. Despite the best efforts to shield the linac from the magnetic fringe fields, some persistent magnetic field is expected which would result in electron beam loss. This investigation showed that the detuning of the waveguide caused by additional electron beam loss in persistent magnetic fields is not a concern.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Peculiarities in the Formation of X-Ray Fluxes by Waveguide–Resonators of Different Construction

The phenomenon of total external reflection (TER) of quasi-monochromatic X-ray radiation fluxes on a material interface and the effect of waveguide–resonator propagation of these fluxes in nanosize extended slit clearance, as well as a device operating on the basis of this effect—a planar X-ray waveguide–resonator—are briefly described. Experimental data on the formation of an X-ray flux by a composite X-ray waveguide–resonator are presented, and a model describing the decrease in the angular divergence of the formed flux without a decrease in the integral intensity is proposed. The model is based on the conception of partial angular tunneling of the radiation flux in the gap between two consequently mounted and mutually adjusted waveguide–resonators; the tunneling is implemented due to the interaction between interference fields of standing X-ray waves excited by the radiation transported by the slit clearance of these waveguide–resonators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Properties of waveguide modes in a photon crystal based on slotted silicon with a defect

The properties of localized modes in Bragg waveguides based on grooved silicon are treated theoretically. For structures with different widths of the channel, the dispersion curves for the TE-and TM-polarized waveguide modes as well as the localization coefficient and the group velocity of wave packets formed of the modes are calculated. The calculations were carried out by the method of expansion of the electromagnetic field in terms of plane waves with the use of the approximation of periodic continuation of the solutions. It is shown that, in the structures, the properties of the TE-and TM-polarized waveguide modes are substantially different. The TE modes are found to be most localized in the waveguide channel, with the degree of localization close to unity in the structures with a wide channel. The group velocity of wave packets formed of such modes reach a value close to the speed of light in free space. This is due to the fact that the power of the waveguide mode is almost totally concentrated in the channel, whose permittivity is unity.

36 MATERIALS SCIENCE↗

Fabrication and characterization of submicron polymer waveguides by micro-transfer molding

Various methods exist for fabrication of micron and submicron sized waveguide structures. However, most of them include expensive and time consuming semiconductor fabrication techniques. An economical method for fabricating waveguide structures is introduced and demonstrated in this thesis. This method is established based on previously well-developed photonic crystal fabrication method called two-polymer microtransfer molding. The waveguide in this work functions by a coupler structure that diffracts the incident light into submicron polymer rods. The light is then guided through the rods. Characterization is done by collecting the light that has been guided through the waveguide and exits the end of these submicron polymer bars. The coupling and waveguiding capabilities are demonstrated using two light sources, a laser and white light.

36 MATERIALS SCIENCE↗

Linear-array ultrasonic waveguide transducer for under sodium viewing.

In this report, we first present the basic design of a low-noise waveguide and its performance followed by a review of the array transducer technology. The report then presents the concept and basic designs of arrayed waveguide transducers that can apply to under-sodium viewing for in-service inspection of fast reactors. Depending on applications, the basic waveguide arrays consist of designs for sideway and downward viewing. For each viewing application, two array geometries, linear and circular, are included in design analysis. Methods to scan a 2-D target using a linear array waveguide transducer are discussed. Future plan to develop a laboratory array waveguide prototype is also presented.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗