Search NASA⌕ Search

SEARCH · Search NASA

Results for “Washington State”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Iodate interactions with calcite: implications for natural attenuation

Solid-phase interactions and speciation are important to radioiodine transport in groundwater. At the Hanford Site in Southeastern Washington State, iodate (IO 3 - ) is the main aqueous species in dilute radioiodine groundwater plumes. Like other oxyanions, IO 3 - may be incorporated into and/or adsorbed onto calcite, a common mineral at Hanford, decreasing its mobility in the environment. A series of macroscale batch experiments combined with solid phase characterization were conducted to identify variables impacting time-dependent aqueous IO 3 - removal via calcite precipitation and determine the location of IO 3 - within the calcite crystal structure. Results demonstrated 11.5-97% aqueous IO 3 - removal during initial rapid calcite precipitation. Incorporation was apparently the main removal mechanism, although later slower precipitation and/or adsorption may have also contributed to IO 3 - removal. Using a higher concentration of the calcite forming solutions (i.e., using 1M vs. 0.1M concentrations) resulted in an increase in the amount of precipitated calcite and a greater percentage of IO 3 - removed; however, calcite formed with lower molarity solutions resulted in higher IO 3 - mass (µg/g) removal. Solubility testing of laboratory produced calcites showed only small differences in solubility for calcite with and without IO 3 - incorporated into the structure. Evidence collected from SEM/FIB and TEM/SAED suggested that the IO 3 - incorporated into calcite was present in regions close to surface (implying potential easy release upon calcite dissolution).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Integration of Large-Scale Electrical Imaging into Geological Framework Development and Refinement

Geologic framework models (GFMs) are critical to the construction of reliable simulation models of groundwater flow and contaminant transport. To support GFM development, direct information (e.g., core samples, fluid samples, hydraulic testing) tends to be sparse and separated by large distances relative to the spatial scales of aquifer heterogeneity. There are additional challenges associated with highly contaminated legacy waste sites, where drilling is particularly costly, and invasive sampling requires specialized handling and disposal of hazardous materials. At these sites in particular, non-invasive geophysical imaging can play an important role in filling spatial gaps between boreholes and reducing characterization costs by optimizing and minimizing the number of necessary boreholes. Here this paper presents a case study demonstrating the use of large-scale (> 30 km 2 ) electrical mapping to identify hydrostratigraphy and potential paleochannels at the Hanford Site, located in Washington State, USA. In two field campaigns, over 36 line-kilometers of electrical resistivity tomography (ERT) data were collected along 14 transects. ERT surveys were sited and performed to image critical aspects (e.g., paleochannels, stratigraphic contacts) of the subsurface, demonstrating a general workflow for integrating ERT with GFM development. Inconsistencies between the GFM and ERT were catalogued to provide a basis for future site characterization using complementary geophysical methods and (or) direct sampling.

58 GEOSCIENCES↗
DOE OSTI2024

Effect of neutron beamline irradiation on hydrogen equilibrium vapor pressure over hydrided Zircaloy-4

Here, the effect of neutron irradiation on the hydrogen equilibrium vapor pressure over hydrided samples of nickel-plated Zircaloy-4 was evaluated at the Washington State University Research Reactor’s epithermal beamline facility. To enable this study, a measurement capability was designed and assembled to obtain low pressure (<0.1 Pa) measurements over the temperature range of interest (i.e., ~300° - 400°C). Measurement results were in good agreement with tends extrapolated from previous data obtained at higher temperatures as well as recent thermodynamic data. No irradiation enhancement of vapor pressure was observed under the incident flux of epithermal neutrons over this temperature range.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Mechanistic insights into N 2 O formation as a side product in NH 3 -SCR over small pore Cu-zeolites

Here, the present contribution provides clarity to N 2 O formation mechanisms and key influencing factors during low temperature NH 3 -SCR, with the goal of enabling the rational design of advanced SCR catalysts with low greenhouse gas impact. By studying more than 50 small pore Cu-exchanged zeolite SCR catalyst samples, including model catalysts synthesized in our laboratories and state-of-the-art industrial catalysts, we explored a wide range of factors affecting N 2 O formation. These factors included Cu loading, support Si/Al ratio, support topology, catalyst aging, reaction temperature and reactant feed composition effects. We probed N 2 O formation under both steady-state SCR, and during NH 4 NO 3 decomposition via temperature programmed desorption (TPD). Finally, we used DFT to probe energetics of possible N 2 O formation pathways. Based on these studies, we confirm that low temperature N 2 O formation occurs via multiple reaction pathways that all involve NH 4 NO 3 and are supported by Cu moieties that facilitate in-situ NO oxidation to NO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Using mid-infrared spectroscopy to estimate soil microbial properties at the continental scale

Understanding microbial community properties is critical to improving the predictions of biogeochemical processes for enhancing soil carbon sequestration. Here, in this observational study, mid-infrared (MIR) spectroscopy and partial least squares regression was used to predict soil microbial and chemical properties from diverse ecosystems across the continental USA. Random calibration and validation demonstrated the prediction potential for soil properties using MIR spectra, with the strongest predictions for microbial respiration, followed by microbial biomass carbon and nitrogen, ß-glucosidase activity, as well as soil chemical properties including organic carbon and total nitrogen. Microbial properties were mainly positively correlated to spectral regions associated with aliphatic C-H groups and C=O stretches of polysaccharides and negatively correlated to quartz and silicate-associated regions. We conclude that MIR spectroscopy can characterize soil microbial functions and be useful for the improvement of continental-scale soil carbon modeling and prediction programs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Building an expanded bio-based economy through synthetic biology

The field of synthetic biology is essential to the continued development of a bio-based economy, creating mechanisms to supply carbon needed in the economy by both converting existing end-of-life wastes as well as by creating novel, purpose-grown and sustainable feedstocks. Here, we first discuss the near- and long-term resources available for use as feedstocks for bioconversion as well as the output molecules needed for building the foundation of an expanded bio-based economy. We then outline the organisms and phenotypic traits that are needed for the performance-advantaged chassis organisms of the future. Furthermore, we detail the advances, challenges, and opportunities in both microbial and plant synthetic biology relevant to expanding the bio-based economy. Finally, we explore technologies that have and will further enable advances in synthetic biology and the greater bio-based economy.

09 BIOMASS FUELS↗
DOE OSTI2026

Diethylenetriamine-functionalized graphene oxide: Insights into ion adsorption and applications in rare earth element separation

The growing demand for critical minerals and materials requires atom- and energy-efficient, selective separations to overcome the challenges posed by the similar chemical and physical properties of the rare earth elements (REEs) and their low concentrations in unconventional domestic feedstocks. Here, in this study, we developed diethylenetriamine-functionalized graphene oxide (DETA-GO) as a membrane material for REE adsorption and separation. Synthesis conditions were optimized to maximize nitrogen incorporation while also preserving GO dispersibility for facile membrane fabrication. We investigated the mechanism of amine functionalization, the nitrogen-bonding configurations, the organization of the interlayer transport channels, and the resulting effects on ion and water transport for REE separations. Neat-GO and DETA-GO multilayer laminate membranes were fabricated by vacuum filtration onto polymer supports. To investigate the effects of amine functionalization, the membranes were characterized using scanning electron microscopy, Raman, Fourier transform infrared, and X-ray photoelectron spectroscopy, as well as grazing-incidence X-ray diffraction measurements. Ion permeation experiments with representative lanthanum (La 3+ ) and ytterbium (Yb 3+ ) solutions revealed enhanced ion adsorption and water transport through DETA-GO membranes compared to neat-GO. The strong affinity of the membranes for multivalent REEs was also validated with conductivity and inductively coupled plasma mass spectrometry measurements. Atomistic insight into the role of amine functionalization in modulating nanochannel architecture and long-term stability, optimizing adsorption sites, and regulating REE and water transport was obtained using classical molecular dynamics simulations. Collectively, our joint experimental and theoretical study demonstrates the potential of DETA-GO membranes for selective REE separations, offering insights into ion-binding mechanisms, water-transport properties, and nanochannel optimization for the recovery of critical materials from aqueous feedstocks.

Adsorbent↗
DOE OSTI2023

Areal interpolation of population projections consistent with different SSPs from 1-km resolution to block level based on USA Structures dataset

Population data are normally collected at various census administrative levels, and areal interpolation of population is often required to transform population to the desired spatial resolution. Building footprint datasets, such as Microsoft building footprints, have proven to be useful in estimating population distribution and can therefore be used for areal interpolation of population. In addition to Microsoft building footprints, the recently released USA Structures dataset provides additional information such as building type and building height for some regions, which may provide valuable information for a better depiction of population distribution and improved population areal interpolation accuracy. In this study, we have conducted areal interpolation of population projections consistent with three different Shared Socioeconomic Pathways (SSP2, SSP3, and SSP5) from 1-km grid cells to block level in Washington state for every ten years from 2020 to 2040 based on USA Structures. We assessed USA Structures-based population downscaling accuracy using U.S. decennial survey data in 2020 under three different downscaling schemes, including population downscaling from census tracts to block groups, from census tracts to blocks, and from block groups to blocks. The resulting accuracies were compared with those based on Microsoft building footprints. The comparison showed that USA Structures achieved higher accuracies across different population density regions and areas with different urbanization extent within our study area.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

An experimental study on round-trip efficiency of a preheating control with a medium office building

The interactions between building energy efficiency and demand response (DR) with buildings may complicate their impacts on the electricity grid and buildings, yet those interactions are not well understood. This work fills this gap by presenting an experimental study that quantifies the effects of DR on building energy efficiency. Unlike existing studies, this work 1) investigates the uncertainty levels when assessing the effects of DR; 2) studies the impact of rooftop heat pumps with direct expansion refrigerant-to-air coils on the round-trip efficiency. Specifically, we considered a medium office building (~1860 m 2 ), which is served by rooftop units, located in eastern Washington State. We performed preheating control tests during typical heating days in the year 2022 and compared the building’s energy consumption during the testing days to that during normal operation days under similar weather conditions. To understand how well those normal operation days represent the baseline for the assessment, the relationship between the energy performance of this building and weather conditions was also studied. Experimental results reveal that the round-trip efficiency (i.e., the ratio of discharging energy output from the building to charging energy input into the building) was between 0.16 and 0.92. The results show that significant energy loss may occur during the preheating process. Finally, it also suggests a significant correlation between the energy efficiency of the studied building under the preheating control and the outdoor temperature; and a highly nonlinear relationship between the zone temperature changing rate and the weather condition.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Modeling framework for evaluating the impacts of hydrodynamic pressure on hydrologic exchange fluxes and residence time for a large-scale river section over a long-term period

Quantifying hydrologic exchange fluxes (HEF) at the river and subsurface interface and their residence times (RT) in subsurface are important for managing the water quality and ecosystem health in dynamic river corridor systems. In this study, a modeling framework is developed for coupling the three-dimensional (3D) multi-phase surface, subsurface flow transport, and numerical tracer model for RT in a large-scale river section over a long period. The framework is utilized to evaluate the impacts of hydrodynamic pressure on HEFs and RT for a 30 km section of the Columbia River in Washington State over a three-year period. Based on comparisons between model simulations with and without considering hydrodynamic pressure, we found that hydrodynamic pressure increases the net HEFs by 7% with river gaining water from the subsurface domain, and leads to slight reduction of RT.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Migrating Populus with climate change: Phenology, coppice management, cold spell susceptibility, leaf dynamics, and biomass production

Understanding the phenology and productivity of Populus species is crucial for effective management and conservation strategies amid climate change. We investigated leaf budbreak timing, susceptibility to cold damage, leaf dynamics, and biomass production of 168 Populus genotypes with diverse provenances in the southeastern United States. Our study revealed significant variation in budbreak timing across different taxa and years, with genotypes inheriting traits adapted to their parents’ local climates. Temperature emerged as a key factor triggering budbreak, while leaf development depended on other environmental cues such as photoperiod. Notably, budbreak occurred approximately 20 days earlier in 2023 compared to 2022 due to higher accumulated degree days (ADDs). Short-rotation-coppice (SRC) management delayed budbreak by five to ten days. Cold damage was significant in 2023, particularly for genotypes from northern provenances and those with P. maximowiczii parentage. Severe damage was also observed in eastern cottonwood ( Populus deltoides ​× ​ Populus deltoides (D ​× ​D)) genotypes, despite most having southeastern US parentages. Leaf dynamics, including leaf duration and leaf area index (LAI), varied across taxa and sites, with earlier budbreak correlating with extended growing seasons and increased LAI. Biomass production was intricately linked to phenological events, with earlier budbreak leading to increased biomass production and greater susceptibility to cold damage. Our findings highlight the importance of genetics, environment, and coppicing management in understanding and managing Populus phenology and biomass production. These insights provide valuable guidance for developing effective breeding, conservation, and management strategies for Populus species in the context of climate change.

Accumulated degree days (ADDs)↗
DOE OSTI2023

Towards assessing the impact of anthropogenic sound on fishes: Gaps, perspectives, and a case study of a large floating bridge

Underwater anthropogenic sound can cause physical, physiological, and behavioral impacts on fishes. With the development of marine energy facilities, the impact of man-made underwater sound on fishes has become a growing regulatory concern. Large gaps remain in how to perform an underwater sound assessment. Such gaps mainly reside in scientific evidence, regulatory criteria, sound characterization metrics, sound field modeling, and instrumentation for field measurement. Here, this paper reviewed existing work on underwater sound assessment for fishes to identify critical gaps and provide perspectives on how to deal with these gaps, demonstrated with a case study on the impact of the Hood Canal Bridge traffic sound on migrating steelhead smolts in Washington State, U.S. We also provide perspectives on future research directions to bridge the identified gaps for aquatic ecological assessment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Zavitsas’ hydration model for electrolytes only stable in the presence of another: NaAl(OH) 4 in aqueous NaOH solution

Many aqueous electrolytes are only stable in the presence of another electrolyte, such as electrolytes that are only soluble in strong acid or base. An example is sodium aluminate [NaAl(OH) 4 ], which is only stable in aqueous NaOH. This complicates developing thermodynamic parameters because it is difficult to separate the contributions of individual electrolytes in multicomponent solutions to measured bulk thermodynamic properties. The present study develops a method to determine the liquid phase parameters from solubility data for Zavitsas’ Hydration model, a model that incorporates hydration parameters into the activities of dissolved species. Furthermore, this study uses gibbsite [Al(OH) 3 ] solubility data in aqueous NaOH solution to develop Zavitsas' model parameters for NaAl(OH) 4 simultaneously with the equilibrium constants. A good fit of the solubility data was found, showing that Zavitsas’ model is effective for this system.

Bayer process↗
DOE OSTI2025

Litter production and foliar nutrient resorption in fast- and slow-growing tree species in the Central Amazon

Litterfall is crucial for forest maintenance, serving as a primary mechanism for nutrient return to the nutrient-poor soils of tropical forests. Foliar nutrient resorption likewise represents an important nutrient-conservation mechanism. Yet, little is known about how these processes vary between fast- and slow-growing species in post-logging areas of the Amazon forest. Here, the objective of this study was to quantify litterfall production and the resorption of foliar nutrients in fast-growing and slow-growing tree species of the Central Amazon, in a forest that was experimentally logged in 1987. The study was conducted from May 2022 to April 2023. Litterfall was collected biweekly using four collectors that were systematically distributed beneath the canopy of each monitored tree, totaling 72 collectors. Three fast-growing and three slow-growing species were selected, each with three replicates, totaling 18 monitored individuals. Species-specific samples of fresh (green) and senesced (litter) leaves were collected and analyzed for their nutrient content and resorption efficiency. Fast-growing species had a monthly leaf litter deposition of 13.53 ± 1.6 g m −2 month −1 , compared to 2.59 ± 0.4 g m −2 month −1 for slow-growing species. The average annual litter production across both functional types was 8.6 ± 2.6 Mg ha −1 year −1 . Nutrient inputs through litterfall were higher in fast-growing species for all elements, particularly nitrogen (N), with 21.92 ± 4.9 kg ha −1 year −1 . Phosphorus (P) and potassium (K) exhibited the highest foliar resorption. P resorption efficiency was 68.3 % in fast-growing species and 57.8 % in slow-growing species. For K, efficiencies were 59.0 % and 41.7 %, respectively. These results highlight the substantial role that fast-growing species play in restoring forest productivity in managed Amazon forests, both through higher litter deposition and nutrient fluxes, and through nutrient conserving-mechanisms such as foliar nutrient resorption.

Amazon forest↗
DOE OSTI2024

In-situ dehydrogenation of lignin-based jet fuel: A novel and sustainable liquid organic hydrogen carrier

A new and sustainable liquid organic hydrogen carrier, Lignin Jet Fuel-based Liquid Organic Hydrogen Carrier (LJF-HyC), has been discovered. This innovative LOHC is created from Lignin Jet Fuel (LJF) through dehydrogenation reactions. The process was carried out in situ using platinum nanoparticles supported on zeolite, resulting in a significant increase in aromatic carbon content. This increase indicates the successful formation of aromatic rings via C–H dissociation. In-situ Nuclear Magnetic Resonance (NMR) and gas chromatographic analyses revealed the formation of unsaturated and partially unsaturated compounds, including alkylbenzenes, tetralins, naphthalenes with double bond equivalence of 4–8, from six apparent reaction pathways, four of which can be major. The original LJF, consisting primarily of mono-, di-, and tricyclohexylalkanes (96 wt%), was converted to dehydrogenated products, constituting approximately 18.5 wt% of the LJF composition. These findings pave the way for developing sustainable hydrogen carriers derived from sustainable aviation fuels.

08 HYDROGEN↗
DOE OSTI2021

Stratigraphic Identification with Airborne Electromagnetic Methods at the Hanford Site, Washington

Stratigraphic units can influence the fate and transport of subsurface contaminants within groundwater. Units having coarse-grained sediments act as preferential flow pathways, and therefore can accelerate the transport of contaminants to reach human and ecological receptors. At legacy waste sites, detailed knowledge of subsurface stratigraphy can be used for effective monitoring and remediation planning to help minimize risk to human health and the environment. Airborne electromagnetic (AEM) methods can non-invasively provide information on kilometer-scale or larger subsurface stratigraphic features and fill informational gaps in directly sampled data from sparsely located boreholes. In this paper, we present inversion results of a 412 line-km frequency-domain AEM survey to delineate subsurface stratigraphic features at the Hanford Site, located in southeastern Washington State. The inversion was performed using a massively parallel 3D electromagnetic modeling and inversion code, where the modeling is based on solving frequency-domain Maxwell’s equations using an unstructured-mesh finite-element method and the inversion employs a Gauss-Newton optimization scheme. The results are compared to an underlying geologic framework model (GFM), built by interpolating contact depths of stratigraphic units interpreted from site borehole datasets. In areas with good borehole coverage, the inversion results show a good match with the GFM to a depth of about 60 m. Outside of these areas, the inversion results exhibit inconsistencies from the assumptions made to create the GFM, demonstrating that the AEM survey results can be used to improve the understanding of the geological conceptual model.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Part I: Predicting performance of Purolite A532E resins for remediation of comingled contaminants in groundwater

Ion exchange (IX) resins are used in pump-and-treat (P&T) facilities to remove soluble groundwater contaminants. However, natural anions present at concentrations orders of magnitude higher than contaminants can compete for IX sites and impact resin lifecycles. Here, the Hanford Site’s 200 West Area P&T facility (Washington State, USA) was selected as a case study because it currently uses two IX resins: Purolite® A532E (A532E) to remove pertechnetate (TcO 4 - ) and DOWEX 21K (DOWEX) to remove uranium from groundwater. Nitrate (NO 3 - ), sulfate (SO 4 2- ), chloride (Cl - ), and carbonate (CO 3 2- ) anions have been identified to potentially compete for A532E and DOWEX IX sites. Hanford-relevant anion groundwater concentrations were used to design a series of laboratory-scale batch experiments to evaluate the impact of competing anions on resin performance and potential kinetic effects. These data are then modeled to obtain Cl--normalized equilibrium exchange coefficients (K) needed to predict IX resin performance. The work is presented in two parts, with IX performance evaluated for A532E in Part I and DOWEX in Part II. Part I results demonstrate that TcO 4 - uptake is not impacted by NO 3 - , SO 4 2- , Cl - , CO 3 2- (as HCO 3 - ) and U(VI) carbonate anions, with K TcO4-/Cl- > 4,000, likely due to the high selectivity of A532E trihexylammonium sites for the large, weakly hydrated TcO 4 - anion. Other anion K values were K NO3-/Cl- = 20, K SO4--/Cl- = 0.2, K HCO3-/Cl- = 0.09, K U/Cl- = 370–1000. These K values provide conservative parameters for predicting A532E performance, and demonstrate that, under these test conditions, A532E will remove TcO 4 - from current and future influent streams to meet groundwater treatment objectives.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗