Search NASA⌕ Search

SEARCH · Search NASA

Results for “angle measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Assessment of the Phase-to-Ground Fault Apparent Admittance Method with Phase/Ground Boundaries to Detect Types of Electrical Faults for Protective Relays Using Signature Library and Simulated Events

Protective relays in electric power grids recognize the types of electrical faults in a few seconds. The most common detection method to detect the types of electrical faults is based on measuring the angle between the zero and negative sequence currents. However, it is not completely accurate because the phase-to-phase-ground and phase-to-ground electrical faults could have the same detection conditions. Therefore, engineers need to plot the events after an electrical fault to observe the nature of the incidents in detail. In this study, the phase-to-ground fault apparent (PGFA) admittance method with phase/ground boundaries identified the types of electrical faults located in distribution power lines and feeders. This method was based on measuring the PGFA admittance magnitudes for the faulted and nonfaulted phases, resulting in greater than zero and near zero, respectively. The PGFA admittance algorithm was built with MATLAB/Simulink software and tested with signature library and grid simulation events. The PGFA method with phase/ground boundaries was evaluated with the confusion matrix. The measured and predicted values matched in more than 90% of the tests, and the PGFA admittance method with phase/ground boundaries presented an accuracy of 94.3% and a precision of 100%.

42 ENGINEERING↗
DOE OSTI2024

First search for an anomalous excess of charged-current $\nu_e$ interactions without visible pions using the full MicroBooNE dataset

This public note presents an investigation of low-energy electron-neutrino events in the Fermilab Booster Neutrino Beam by the MicroBooNE experiment. This search is motivated by the excess of low energy electromagnetic events observed by the MiniBooNE experiment and, more broadly, by the landscape of neutrino anomalies observed at short baselines. This is the first measurement to use all of the data collected by the MicroBooNE experiment, corresponding to $1.1\times 10^{21}$ protons on target. Two exclusive samples of electron neutrinos without visible pions are used, one with visible protons and one without any visible protons. MicroBooNE data is compared to two empirical models of the MiniBooNE low energy excess, one obtained by enhancing the electron-neutrino content as a function of the neutrino energy, and one representing the excess for the first time as a function of the kinematics of shower energy and angle. This measurement excludes an electron-like interpretation of the MiniBooNE excess based on these models at $\geq 99\%$ confidence level in all kinematic variables.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Effect of Moisture and Feedstock Variability on the Rheological Behavior of Corn Stover Particles

Continuous feeding, processing, and handling of biomass powders is pivotal to the economic viability of integrated biorefineries. However, current challenges associated with the operational reliability of bulk solids handling and transport greatly impact the process economics and ultimately the widespread commercialization of integrated biorefineries. In this work, we examine the effect of moisture and feedstock variability on the flow behavior of corn stover biomass particles. The total flow energy, compressibility, shear properties, and wall friction angles were measured for corn stover samples A and B containing 0%, 15%, 25%, 50%, and 75% (mass fraction) moisture contents using a FT4 powder rheometer. In general, the flowability of both A and B was reduced when moisture was present as indicated by the stability and variable flow rate, compressibility, and shear tests. The 15% moisture sample had the highest flow energy, revealing the interplay between the increased surface tension and looser packing both of which were caused by liquid bridging. The 75% moisture sample had the highest compressibility and the lowest flowability factor (ff c ). The trend in wall friction angle was found to be dependent upon the surface hydrophobicity of the wall material. The wall friction angle on the hydrophilic, stainless-steel surface increased with moisture and therefore poses additional handling challenges. On the other hand, the wall friction angle on the hydrophobic polymer surfaces were the lowest for samples with intermediate moisture contents. Sample B had greater bulk density, smaller compressibility, and greater flowability than the sample A , as suggested by the compressibility and shear tests. The wall friction angle of sample B was higher than or equal to that of sample A depending on both the type and the surface roughness of the wall material.

09 BIOMASS FUELS↗
DOE OSTI2022

Superhydrophilicity of $α$-alumina surfaces results from tight binding of interfacial waters to specific aluminols

Understanding the microscopic driving force of water wetting is challenging and important for design of materials. The relations between structure, dynamics and hydrogen bonds of interfacial water can be investigated using molecular dynamics simulations. Here, contact angles at the alumina (0001) and ($11\bar{2}0$) surfaces are studied using both classical molecular dynamics simulations and experiments. To test the superhydrophilicity, the free energy cost of removing waters near the interfaces are calculated using the density fluctuations method. The strength of hydrogen bonds is determined by their lifetime and geometry. Both surfaces are superhydrophilic and the (0001) surface is more hydrophilic. Interactions between surfaces and interfacial waters promote a templating effect whereby the latter are aligned in a pattern that follows the underlying lattice of the surfaces. Translational and rotational dynamics of interfacial water molecules are slower than in bulk water. Hydrogen bonds between water and both surfaces are asymmetric, water-to-aluminol ones are stronger than aluminol-to-water ones. Molecular dynamics simulations eliminate the impacts of surface contamination when measuring contact angles and the results reveal the microscopic origin of the macroscopic superhydrophilicity of alumina surfaces: strong water-to-aluminol hydrogen bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Gravity of two photon decay and its quantum coherence

A linear analytical solution is derived for the gravitational shock wave produced by a particle of mass M that decays into a pair of null particles. The resulting space-time is shown to be unperturbed and isotropic, except for a discontinuous perturbation on a spherical null shell. Formulae are derived for the perturbation as a function of polar angle, as measured by an observer at the origin observing clocks on a sphere at distance R. The effect of the shock is interpreted physically as an instantaneous displacement in time and velocity when the shock passes the clocks. The time displacement is shown to be anisotropic, dominated by a quadrupole harmonic aligned with the particle-decay axis, with a magnitude δτ ~ GM/c 3 , independent of R. The velocity displacement is isotropic. The solution is used to derive the gravitational effect of a quantum state with a superposition of a large number of randomly oriented, statistically isotropic particle decays. This approach is shown to provide a well-controlled approximation to estimate the magnitude of gravitational fluctuations in systems composed of null point particles up to the Planck energy in a causal diamond of duration τ = 2R/c, as well as quantum-gravitational fluctuations of black holes and cosmological horizons. Coherent large-angle quantum distortions of macroscopic geometry from fluctuations up to the Planck scale are shown to grow linearly with the duration, with a variance $\langle$δτ 2 $\rangle$ ~ τtP much larger than that produced in models without causal quantum coherence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

X-Ray Performance of Critical-angle Transmission Grating Prototypes for the Arcus Mission

Arcus is a proposed Explorer Class soft X-ray grating spectrometer. It aims to explore cosmic feedback by mapping hot gases within and between galaxies and galaxy clusters and characterizing jets and winds from supermassive black holes and to investigate the dynamics of protoplanetary disks and stellar accretion. Arcus features 12 m focal-length grazing-incidence silicon pore optics (SPO) developed for the Athena mission. Critical-angle transmission (CAT) gratings efficiently disperse high diffraction orders onto CCDs. We report new and improved X-ray performance results for Arcus-like CAT gratings, including a record resolving power for two coaligned CAT gratings. Multiple Arcus prototype grating facets were illuminated by an SPO at the PANTER facility. The facets consist of 32 × 32.5 mm 2 patterned silicon membranes, bonded to metal frames. The bonding angle is adjusted according to the measured average tilt angle of the grating bars in the membrane. Two simultaneously illuminated facets show a minor broadening of the Al-K α doublet in the 18th and 21st orders with the best-fit record effective resolving power of ${R}_{G}\approx {1.3}_{-0.5}^{+\infty }\times {10}^{4}$ (3σ), about three to four times the Arcus requirement. We measured the diffraction efficiency of quasi-fully illuminated gratings at O-K wavelengths in orders 4–7 in an Arcus-like configuration and compare results with synchrotron spot measurements. After corrections for geometrical effects and bremsstrahlung continuum, we find agreement between full and spot illumination at the two different facilities, as well as with the models used for Arcus effective area predictions. We find that these flight-like gratings meet the diffraction efficiency and greatly exceed the resolving power Arcus requires.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Silylsilane‐Substituted Polymers: Fluorine‐Free, Liquid Repellent, and Hydrolytically Stable Alternatives to Siloxanes

Abstract Per‐ and polyfluoroalkyl substances (PFAS) are omniphobic and exceptionally stable, making them ideal for a wide range of materials applications. However, as “forever chemicals”, their exceptional persistence and bioaccumulation have generated an increasing amount of environmental and health concerns, prompting the search for fluorine‐free alternatives. Siloxane‐based materials are therefore interesting to examine as PFAS alternatives due to their low surface energy and hydrophobicity but suffer from hydrolytic instability of Si─O linkages. To address this challenge, a novel methacrylate monomer, 3‐[tris(trimethylsilyl)silyl]propyl methacrylate (M‐silyl), is designed containing Si─Si bonds rather than Si─O bonds of siloxanes. Polymers derived from M‐silyl (P‐silyl) is prepared by controlled free radical polymerization and compared with their siloxane analogues after coating on silicon wafers. Contact angle (CA) measurements confirmed P‐silyl to be hydrophobic (advancing/receding water CA = 109.7°/83.0°), with a low‐hysteresis for oil (lyophobic) (hexadecane CA hysteresis = 2.0°), comparable to its siloxane‐based counterpart. Importantly, P‐silyl maintained these surface properties after exposure to acidic or basic conditions, while siloxane analogues lost hydrophobicity. Consequently, the incorporation of Si ─ Si linkages into the design of the polymer enables chemically stable, fluorine‐free alternatives for water‐repellent and low hysteresis surface coatings and advances the design of fluorine‐free functional materials.

fluorine-free↗
DOE OSTI2025

Reconfigurable Magnetotransport in MnBi 2 Te 4 via Gate and Magnetic Field Tuning

The intrinsic magnetic topological insulator MnBi 2 Te 4 is a promising platform for exploring quantum phases with nontrivial band topology and for enabling electrical control over coupled magnetic and electronic phase transitions. In-plane magnetic fields, in particular, offer a distinct means of tuning these properties by strengthening quantized Hall effects, enhancing surface energy gaps, and driving spin reorientation transitions. However, a systematic understanding of how such fields affect magnetotransport is limited. Here, the magnetotransport behavior of few-layer MnBi 2 Te 4 as a function of gate voltage, temperature, and magnetic field angle, with a primary focus on in-plane field effects, are investigated. A gate-tunable crossover in magnetoresistance is observed from positive to negative values under in-plane magnetic fields as the gate voltage is swept below the charge neutrality point at temperatures below the Néel temperature. The in-plane field drives a transition from the antiferromagnetic ground state to a ferromagnetic configuration with spins aligned in-plane, while simultaneously altering the electronic structure, as revealed by gate-dependent transport features. The angle-dependent measurements reveal strongly gate-tunable magnetotransport anisotropy. These results establish in-plane magnetic fields as an effective tuning parameter for modulating spin and charge transport in MnBi 2 Te 4 , advancing prospects for reconfigurable spintronic and topological devices.

MnBi 2 Te 4↗
DOE OSTI2021

Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum

High speed friction grinding has been used to grind plant and food substances in water but never been explored for grinding of thermoplastics like polylactic acid (PLA), low and high density polyethylene and polypropylene. Such grinding was investigated in this work and was made possible by using 0.5% guar gum solution instead of just water because increasing the viscosity of water reduced their settling and the speed of passing through the grinder. Additionally, tensile, flexural, and impact strengths of the plastics were studied and higher grinding efficiency of PLA could be explained by its low elongation-at-break compared to low density polyethylene, high density polyethylene, and polypropylene. The microplastics (2000–45 μm) were studied for mass and particle size distributions and by scanning electron microscopy, 13 C CP/MAS NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In addition, viscosity of guar gum and contact angles was measured. This new technology can produce finely ground microplastics (710–45 μm) for a variety of applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Soybean Oil Modified Bio-based Poly(vinyl alcohol)s via Ring-Opening Polymerization

In this paper, a simple method to modify the poly(vinyl alcohol) (PVA) through ring-opening reaction of epoxidized soybean oil (ESBO), catalyzed by hydrochloric acid is reported. The effect of ESBO loading ratio, in terms of mole (PVA/ESBO (n/n) = 1:0.5; 1:1 and 1:1.5) in the reaction medium, on the biodegradable, wettability and thermal properties of final PVA-SBO films is systematically investigated, comparing with PVA. The formation of PVA-SBOs is structurally confirmed by Fourier transform infrared (FT-IR) spectroscopy, whereas their wettability and thermal properties are studied by water contact angle (WCA) measurement, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC), respectively. The obtained PVA-SBOs with higher ESBO loading exhibit both improved thermal properties and higher hydrophobic characteristic compared to others. Furthermore, biodegradability of resulting PVA-SBOs is also investigated by enzymatic degradation experiments. It is determined that around 34% of PVA is degraded by enzymatic experiments after 30 days and PVA-SBO with lower ESBO loading is more degraded than others with around 52%. Consequently, some experimental results are presented to indicate that PVA-SBOs are encouraging materials for diverse applications and their extensions can be good candidate for reducing the environmental problem and consumption of petroleum resources.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Transport of coexisting Ni-Cu sulfide liquid and silicate melt in partially molten peridotite

Transport of coexisting sulfide and silicate melts in partially molten peridotite contributes to the redistribution of chalcophile elements within the upper mantle as well as the genesis of magmatic Ni-Cu sulfide deposits, but has not been investigated systematically. Using laboratory experiments, theoretical calculations, and X-ray synchrotron microtomography, this study documents the topology and considers controls on the extraction of two immiscible liquids during partial melting of mantle peridotite. Under hydrostatic conditions, the measured dihedral angle at silicate melt-mineral-mineral junctions is 13.7–21.3°. Silicate melt is distributed along grain edges forming incompletely interconnected melt channels that disconnected by some dead ends at melt fractions ~7–9 vol%. Application of theoretically predicted permeability (k ~10 -14 -10 -16 m 2 ) permits estimation of the extraction velocity of silicate melt of 0.7-11.1 μm/day within a single interconnected melt channel. In the absence of silicate melt, isolated sulfide droplets (3.77 vol%) show a sulfide-olivine-olivine dihedral angle of 91.5–101.3°. However, in the presence of silicate melt, sulfide droplets (average size ~2.53±2.14μm, 1σ) are partially surrounded by silicate melt and stranded in triple junctions or melt pockets due to the limitation of the smallest dimension (0.3μm) of melt channels. Thus, the extraction of sulfide liquid is highly restricted by these dead ends and the smallest dimension of melt channels during porous flow of silicate melt. In contrast, during large-strain shear deformation (strain ~1.6–2.5), initially stranded sulfide droplets were elongated and extracted with silicate melt into liquid-rich sheets with a length of several hundred microns, constantly oriented at 14.3±4.5°to the shear plane and antithetic to the shear direction. The angle is lower than that (18-30°) of those sheets containing sulfide liquid only, indicating that silicate melt dominates liquid-rich sheets. Driven by stress, silicate melt-dominated liquid-rich sheets open the appropriately oriented grain boundaries between silicate minerals, thus providing an efficient pathway for the extraction of sulfide liquid during deformation. When such sheet-like channels remain open, sulfide droplets (> millimeter-scale) can be potentially mobile through high strain domains of the upper mantle, contributing to the addition of chalcophile elements and the fertilization of the lithospheric mantle.

high P-T experiment↗
DOE OSTI2026

Magnetic structure of topological nodal-line semimetal EuSb 2

Here, we investigated the magnetic structure of the magnetic topological nodal-line semimetal EuSb 2 using x-ray resonant magnetic scattering at the Eu 𝐿 3 absorption edge. Forbidden magnetic reflections confirm antiferromagnetic ordering with propagation vector 𝐪 = (0.5,0,0) below 𝑇 N ≈ 27 K. Azimuthal-angle-dependent measurements reveal that the Eu moments are aligned along the monoclinic 𝑏 axis. Comparison between the measured 𝐐-dependent magnetic Bragg peak intensities and calculations based on representation analysis identifies the magnetic structure as the A-type antiferromagnetic 𝛤 4 representation with a (++−−) arrangement along the 𝑎 direction. These results establish the microscopic magnetic structure of EuSb 2 and provide a basis for understanding the interplay between antiferromagnetism and topological electronic states in this system.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Divergence study and emittance measurements for the electron beam emitted from a diamond pyramid

This paper reports the results of a divergence study and emittance measurements for an electron beam emitted from a single diamond pyramid in a sparse diamond field-emitter array (DFEA) cathode. DFEA cathodes are arrays of micrometer scale diamond pyramids with nanometer scale tips. A single diamond pyramid produces currents as high as 10 μA from a small surface area. DFEA cathodes are expected to be a good beam source for compact dielectric laser accelerators. For the electron beam divergence experiment, we have designed and assembled a test stand consisting of a DFEA cathode, a mesh anode, and a screen. We measured current and the size of the beam on the screen as functions of the distance between the cathode and the anode, the size of a pyramid’s base, and applied voltage on the cathode. In order to perform beam emittance measurements, we designed and fabricated a magnetic lens to be placed between the mesh and the screen. By measuring the size of the beam for different distances between the lens and the screen, we estimate the beam’s emittance. Here, we also simulated the electron beam dynamics with Computer Simulation Technology Studio and General Particle Tracer codes. Experimentally measured divergence angles and normalized transverse emittance show good agreement with simulations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Modeling Structural Colors from Disordered One-Component Colloidal Nanoparticle-Based Supraballs Using Combined Experimental and Simulation Techniques

Bright, saturated structural colors in birds have inspired synthesis of self-assembled, disordered arrays of assembled nanoparticles with varied particle spacings and refractive indices. However, predicting colors of assembled nanoparticles, and thereby guiding their synthesis, remains challenging due to the effects of multiple scattering and strong absorption. In this work, we use a computational approach to first reconstruct the nanoparticles’ assembled structures from small-angle scattering measurements and then input the reconstructed structures to a finite-difference time-domain method to predict their color and reflectance. This computational approach is successfully validated by comparing its predictions against experimentally measured reflectance and provides a pathway for reverse engineering colloidal assemblies with desired optical and photothermal properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tetrahedral triple-Q magnetic ordering and large spontaneous Hall conductivity in the metallic triangular antiferromagnet Co 1/3 TaS 2

The triangular lattice antiferromagnet (TLAF) has been the standard paradigm of frustrated magnetism for several decades. The most common magnetic ordering in insulating TLAFs is the 120° structure. However, a new triple-Q chiral ordering can emerge in metallic TLAFs, representing the short wavelength limit of magnetic skyrmion crystals. We report the metallic TLAF Co 1 / 3 TaS 2 as the first example of tetrahedral triple-Q magnetic ordering with the associated topological Hall effect (non-zero σ xy (H = 0)). We also present a theoretical framework that describes the emergence of this magnetic ground state, which is further supported by the electronic structure measured by angle-resolved photoemission spectroscopy. Additionally, our measurements of the inelastic neutron scattering cross section are consistent with the calculated dynamical structure factor of the tetrahedral triple-Q state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Double-pulse speckle contrast correlations with near Fourier transform limited free-electron laser light using hard X-ray split-and-delay

Abstract The ability to deliver two coherent X-ray pulses with precise time-delays ranging from a few femtoseconds to nanoseconds enables critical capabilities of probing ultra-fast phenomena in condensed matter systems at X-ray free electron laser (FEL) sources. Recent progress made in the hard X-ray split-and-delay optics developments now brings a very promising prospect for resolving atomic-scale motions that were not accessible by previous time-resolved techniques. Here, we report on characterizing the spatial and temporal coherence properties of the hard X-ray FEL beam after propagating through split-and-delay optics. Speckle contrast analysis of small-angle scattering measurements from nanoparticles reveals well-preserved transverse coherence of the beam. Measuring intensity fluctuations from successive X-ray pulses also reveals that only single or double temporal modes remain in the transmitted beam, corresponding to nearly Fourier transform limited pulses.

42 ENGINEERING↗
DOE OSTI2026

The role of focusing geometry in MeV x-ray production from petawatt laser–solid interaction

Relativistic laser–plasma interactions provide a compact and flexible route to generating bright, ultrashort pulses of MeV x rays, with applications in high-energy density science, nuclear physics, and radiography. Despite extensive study of intensity scaling in laser-driven electron acceleration, the role of focusing geometry and focal-volume effects in MeV radiation production remains insufficiently understood. Here, we present experimental and kinetic simulation results from the Texas Petawatt Laser (120 J, 140 fs) in which the focusing geometry (f/3 or f/1.5) is varied, while the laser energy and pulse duration are fixed. Experimentally, the f/3 geometry produces approximately three times more MeV radiation than the f/1.5 geometry, despite its twofold lower nominal vacuum intensity. This result is based on the time-integrated radiation per unit solid angle, as measured along the diagnostic line of sight. Three-dimensional particle-in-cell simulations reproduce this trend when a modest (10s of μm) effective focal plane shift is introduced, demonstrating that relativistic laser–plasma coupling is highly sensitive to focal geometry in the presence of a preplasma. This behavior is consistent with differences in interaction length and effective intensity at the critical surface between the two configurations. The sensitivity of the tightly focused f/1.5 configuration ($z_R ≈$⁠ 5 μ m) reflects the combined influence of thermal lensing and an extended preplasma, while the f/3 geometry (⁠$z_R ≈$ 80 μ m) remains comparatively robust. These results demonstrate a breakdown of conventional intensity scaling and identify focusing geometry as a critical control parameter for MeV electron and x-ray generation at petawatt powers. Implications for laser–plasma-based radiographic facilities are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗