SEARCH · Search NASA

Results for “atomic & molecular structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Phase Synergy Enables Low‐Power Ferroelectric Switching in HfO 2 Epitaxial Films

HfO 2 -based ferroelectric materials have emerged as leading candidates for next-generation non-volatile memory technologies, owing to their nanoscale robust ferroelectricity and complementary metal–oxide–semiconductor (CMOS) compatibility. However, challenges and debates persist in advancing and comprehensively understanding their ferroelectric behavior. In particular, conventional approaches typically regard non-ferroelectric phases as detrimental and primarily focus on suppressing their formation, yet overlooking their potentially synergistic contributions—particularly those of the tetragonal (T) phase. Here, we unambiguously clarify the beneficial role of the T-phase and introduce a phase-boundary engineering strategy that deliberately harnesses it to enhance ferroelectricity in HfO 2 films. By stabilizing optimal coherent boundaries between ferroelectric orthorhombic (O) and T phases in epitaxial La-doped HfO 2 films, we achieve significant improvements in ferroelectric properties—doubling the remanent polarization (P r ∼ 30 µC/cm 2 ) and substantially reducing the coercive field (E c ∼ 3 MV/cm) by 30% compared to low-La doped samples without such boundaries. Atomic-scale electron microscopy reveals the structural nature of the atomically sharp, coherent O–T boundaries. Combined with deep-learning enhanced molecular dynamics simulations, our results unravel that these boundaries facilitate intermediate polarization states that lower the switching energy barrier. Consequently, phase coexistence shifts from an inherent drawback to a tunable design element, offering a broadly applicable route to ultra-low-power HfO 2 -based nanoelectronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1989

Fast molecular shocks. II - Emission from fast dissociative shocks

The line radiations emitted in the cooling gas behind a fast dissociative shock are studied. The intensities emitted in high rotational transitions of the neutral molecules CO, SiO, HCN, CN, NO, and SO are estimated, as well as in rovibrational transitions of the molecular ions HeH(+) and OH(+) in radio recombination lines of atomic hydrogen and in fine-structure transitions of C, C(+), O, and Si(+). The predictions are compared with the observed intensities of line emission from the Orion-KL region. For Orion-KL the observations do not exclude, but probably do not require, the presence of a fast dissociative shock. Emission from SiO in high-J rotational states and from vibrationally excited OH(+), HeH(+), HeH(+), and SO(+) may be detectable from dissociative shocks under suitable conditions of preshock density and shock velocity; such emission may prove to be a useful diagnostic probe of fast shock activity.

Neufeld, David A.↗

NASA NTRS1993

Density wave triggered star formation in grand design spirals

In normal spiral galaxies the arms are the main sites for star formation. This is the cause of their optical contrast compared with the rest of the disc. The spiral structure can be observed as a higher concentration of H2 regions, neutral gas (both atomic and molecular via CO), dust and stars than in the interarm disc. It seens generally accepted that, at least in grand design spirals, there are density waves in the discs. However, several questions are not clear yet and still under discussion. An important question could be termed the triggering dilemma (by analogy with the 'winding dilemma' raised in the forties): Is the enhanced star formation in the spiral arms triggered by the passage of a system of density waves or is it simply due to the presence of a higher column density of gas there? In the present work, we use triggering in the same sense as the moderate to strong triggering defined by Elmegreen (1992), that is to say that star formation in the arms occurs at a rate faster than that in the interarm zone, relative to the available placental gas. Our group has designed several tests to elucidate whether or not star formation is triggered in the arms with respect to the interarm region and we summarize one of them, that of the ratio of the star formation efficiency in the arms divided by that of the interarm zone at the same galactocentric distance which we may call the relative massive star formation efficiency, where the efficiency is defined using the ratio of the mass of stars (evaluated via the H alpha flux) to the mass of neutral gas, atomic plus molecular (which must be measured with the adequate angular resolution). If the relative efficiency is of order unity, the star formation is proportional to the mass of gas, if some kind of induced star formation is present, the relative efficiency should be considerably larger than unity.

Cepa, J.↗

DOE OSTI2025

Deconstructing Chirality: Probing Local and Nonlocal Effects in Azobenzene Derivatives with X-ray Circular Dichroism

Resolving molecular chirality on the atomic scale remains a critical challenge in chemistry. Conventional Optical Circular Dichroism spectroscopy often overlooks subtle and localized structural features. Here, we computationally investigate site-specific X-ray circular dichroism (XCD) across a series of trans-azobenzene derivatives to deconstruct and interpret chiroptical signals at the atomic level. Our modeling reveals that XCD is capable of distinguishing dichroic contributions arising from both a local chiral center and a global molecular twist, revealing their intricate interplay and potential for constructive or destructive interference. We show that sterically induced global distortions can dominate the XCD signal in some cases, even suppressing the response from the chiral center itself. This insight suggests a new molecular design principle for tuning the chiroptical activity, which we extend by proposing strategies to achieve unidirectional photoisomerization through steric gearing. Altogether, this work establishes a quantitative framework for engineering chiroptical responses, laying the foundation for the design of functional chiral systems utilizing principles of unidirectional molecular motor-like conformational dynamics.

X-ray spectroscopy↗

NASA NTRS1990

A scaling law of radial gas distribution in disk galaxies

Based on the idea that local conditions within a galactic disk largely determine the region's evolution time scale, researchers built a theoretical model to take into account molecular cloud and star formations in the disk evolution process. Despite some variations that may be caused by spiral arms and central bulge masses, they found that many late-type galaxies show consistency with the model in their radial atomic and molecular gas profiles. In particular, researchers propose that a scaling law be used to generalize the gas distribution characteristics. This scaling law may be useful in helping to understand the observed gas contents in many galaxies. Their model assumes an exponential mass distribution with disk radius. Most of the mass are in atomic gas state at the beginning of the evolution. Molecular clouds form through a modified Schmidt Law which takes into account gravitational instabilities in a possible three-phase structure of diffuse interstellar medium (McKee and Ostriker, 1977; Balbus and Cowie, 1985); whereas star formation proceeds presumably unaffected by the environmental conditions outside of molecular clouds (Young, 1987). In such a model both atomic and molecular gas profiles in a typical galactic disk (as a result of the evolution) can be fitted simultaneously by adjusting the efficiency constants. Galaxies of different sizes and masses, on the other hand, can be compared with the model by simply scaling their characteristic length scales and shifting their radial ranges to match the assumed disk total mass profile sigma tot(r).

Wang, Zhong↗

NASA NTRS1982

Quantum chemical calculation of the equilibrium structures of small metal atom clusters

Metal atom clusters are studied based on the application of ab initio quantum mechanical approaches. Because these large 'molecular' systems pose special practical computational problems in the application of the quantum mechanical methods, there is a special need to find simplifying techniques that do not compromise the reliability of the calculations. Research is therefore directed towards various aspects of the implementation of the effective core potential technique for the removal of the metal atom core electrons from the calculations.

Kahn, L. R.↗

DOE OSTI2026

Non-resonant Raman optical activity from phase-space electronic structure theory

In order to model experimental non-resonant Raman optical activity, chemists must compute a host of second-order response tensors (e.g., the electric-dipole–magnetic-dipole polarizability) and their nuclear derivatives along a set of vibrational modes. While these response functions are almost always computed within a Born–Oppenheimer (BO) framework, here we provide a natural interpretation of the electric-dipole–magnetic-dipole polarizability within phase space electronic structure theory, a beyond-BO model whereby the electronic structure depends on nuclear momentum (P) in addition to nuclear position (R). By coupling to nuclear momentum, phase space electronic structure theory is able to capture the asymmetric response of the electronic properties to an external field, in so far as for a vibrating (non-stationary) molecule, $\frac{∂μ}{∂B}$≠$\frac{∂m}{∂F}$, where μ and m are the electrical linear and magnetic dipoles, and F and B are electric and magnetic fields. As an example, for a prototypical methyloxirane molecule, we show that phase space electronic structure theory is able to deliver a reasonably good match with experimental results in a manner that is formally invariant to gauge origin G 0 —provided that one uses a complete basis or, alternatively, gauge invariant atomic orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2001

NATO Advanced Study Institute on Spectroscopy

This booklet presents an account of the course 'Spectroscopy of Systems with Spatially Confined Structures' held in Erice-Sicily, Italy, from June 15 to June 30, 2001. This meeting was organized by the International School of Atomic and Molecular Spectroscopy of the 'Ettore Majorana' Centre for Scientific Culture. The purpose of this course was to present and discuss nanometer-scale physics, a rapidly progressing field. The top-down approach of semiconductor technology will soon meet the scales of the bottom-up approaches of supramolecular chemistry and of spatially localized excitations in ionic crystals. This course dealt with the fabrication, measurement and understanding of the relevant structures and brought together the scientific communities responsible for these development. The advances in this area of physics have already let to applications in optoelectronics and will likely lead to many more. The subjects of the course included spatially resolved structures such as quantum wells, quantum wires and quantum dots, single atoms and molecules, clusters, fractal systems, and the development of related techniques like near-field spectroscopy and confocal microscopy to study such systems.

DiBartolo, Baldassare↗

NASA NTRS2012

The Atomic to Molecular Transition in the Interstellar Medium

Study of H2 in UV and IR continues to surprise us with complexity of excitation state, OPR, and role in astrochemistry. Atomic H in molecular clouds is a very powerful tool suggesting that they are not "young" but that it takes millions of years to convert primarily atomic hydrogen clouds to 99.9% molecular form. Laboratory data suggests that H2 formation is efficient over broader range of temperatures than thought to be the case a few years ago, but range is still limited. Issues of complex grain morphology and surface structure make this a very difficult field in which to obtain definitively meaningful results. Ongoing and future observations of CI and CII will improve our understanding of the structure of clouds, their total mass, and how they have evolved and will continue to do so.

interstellar medium↗

DOE OSTI2024

Optical constants of magnetron sputtered aluminum in the range 17–1300 eV with improved accuracy and ultrahigh resolution in the L absorption edge region

This work determines a new set of EUV/x-ray optical constants for aluminum (Al), one of the most important materials in science and technology. Absolute photoabsorption (transmittance) measurements in the 17–1300 eV spectral range were performed on freestanding Al films protected by carbon (C) layers, to prevent oxidation. The dispersive portion of the refractive index was obtained via the Kramers–Kronig transformation. Our data provide significant improvements in accuracy compared to previously tabulated values and reveal fine structure in the Al L 1 and L 2,3 regions, with photon energy step sizes as small as 0.02 eV. The implications of this work in the successful realization of EUV/x-ray instruments and in the validation of atomic and molecular physics models are also discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2024

Epitaxial (Al x Ga 1-x-y In y ) 2 O 3 Alloys Lattice Matched to Monoclinic Ga 2 O 3 Substrates

We have epitaxially stabilized a series of monoclinic (Al x Ga 1-x-y In y ) 2 O 3 alloys by careful choice of molecular beam epitaxy growth conditions, which balance alloy growth with suboxide desorption. The films are pseudomorphic to (010) β-Ga 2 O 3 substrates at thicknesses up to 150 nm with compositions ranging from (Al 0.01 Ga 0.83 In 0.16 ) 2 O 3 to (Al 0.24 Ga 0.75 In 0.03 ) 2 O 3 . The absorption edge shifts from approximately 4.62-5.14 eV with coincidently increasing Al and decreasing In mole fractions. J-V measurements reveal an increase in resistivity over four orders of magnitude with a maximum value of 4.2 x 10 5 Ω-cm for (Al 0.17 Ga 0.76 In 0.07 ) 2 O 3 , which has nearly identical lattice parameters (both in-plane and out-of-plane) to the underlying β-Ga 2 O 3 . Scanning transmission electron microscopy of this sample reveals a mostly uniform and single crystalline film, though we identify areas of non-uniform In incorporation and some γ-phase inclusions. This work demonstrates the feasibility of thick layers lattice-matched to β-Ga 2 O 3 with increased bandgap compared to phase-separation limited (Al,Ga) 2 O 3 . These alloys can enable higher bandgap epitaxial dielectrics and high sheet charge density transistors by increasing the conduction band offset with respect to β-Ga 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Generalized representative structures for atomistic systems

A new method is presented to generate atomic structures that reproduce the essential characteristics of arbitrary material systems, phases, or ensembles. Previous methods allow one to reproduce the essential characteristics (e.g. the chemical disorder) of a large random alloy within a small crystal structure. The ability to generate small representations of random alloys, along with the restriction to crystal systems, results from using the fixed-lattice cluster correlations to describe structural characteristics. A more general description of the structural characteristics of atomic systems is obtained using complete sets of atomic environment descriptors. These are used within for generating representative atomic structures without restriction to fixed lattices. A general data-driven approach is provided here utilizing the atomic cluster expansion (ACE) basis. The N-body ACE descriptors are a complete set of atomic environment descriptors that span both chemical and spatial degrees of freedom and are used within for describing atomic structures. The generalized representative structure (GRS) method presented within generates small atomic structures that reproduce ACE descriptor distributions corresponding to arbitrary structural and chemical complexity. It is shown that systematically improvable representations of crystalline systems on fixed parent lattices, amorphous materials, liquids, and ensembles of atomic structures may be produced efficiently through optimization algorithms. With the GRS method, we highlight reduced representations of atomistic machine-learning training datasets that contain similar amounts of information and small 40–72 atom representations of liquid phases. The ability to use GRS methodology as a driver for informed novel structure generation is also demonstrated. The advantages over other data-driven methods and state-of-the-art methods restricted to high-symmetry systems are highlighted.

atomic cluster expansion↗

NASA NTRS1981

Cluster adsorption on amorphous and crystalline surfaces - A molecular dynamics study of model Pt on Cu and model Pd on Pt

Molecular dynamics was used to study the structure, dispersion and short-time behavior of ten-atom clusters adsorbed onto amorphous and crystalline substrates, in which the cluster atoms differed from the substrate atoms. Two adatom-substrate model systems were chosen; one, in which the interaction energy between adatom pairs was greater than that between substrate pairs, and the other, in which the reverse was true. At relatively low temperature ranges, increased dispersion of cluster atoms occurred: (a) on the amorphous substrate as compared to the FCC(100) surface, (b) with increasing reduced temperature, and (c) with adatom-substrate interaction energy stronger than adatom-adatom interaction. Two-dimensional clusters (rafts) on the FCC(100) surface displayed migration of edge atoms only, indicating a mechanism for the cluster rotation and shape changes found in experimental studies.

Garofalini, S. H.↗

NASA NTRS1985

Spectral identification/elimination of molecular species in spacecraft glow

Computer models of molecular electronic and vibrational emission intensities were developed. Known radiative emission rates (Einstein coefficients) permit the determination of relative excited state densities from spectral intensities. These codes were applied to the published spectra of glow above shuttle surface and to the Spacelab 1 results of Torr and Torr. The theoretical high-resolution spectra were convolved with the appropriate instrumental slit functions to allow accurate comparison with data. The published spacelab spectrum is complex but N2+ Meinel emission can be clearly identified in the ram spectrum. M2 First Positive emission does not correlate well with observed features, nor does the CN Red System. Spectral overlay comparisons are presented. The spectrum of glow above shuttle surfaces, in contrast to the ISO data, is not highly structured. Diatomic molecular emission was matched to the observed spectral shape. Source excitation mechanisms such as (oxygen atom)-(surface species) reaction product chemiluminescence, surface recombination, or resonance fluorescent re-emission will be discussed for each tentative assignment. These assignments are the necessary first analytical step toward mechanism identification. Different glow mechanisms will occur above surfaces under different orbital conditions.

Green, B. D.↗

NASA NTRS1997

In Situ identification of mineral resources with an X-ray-optical "Hand-Lens" instrument

Marshall, J.↗

NASA NTRS1999

In Situ Identification of Mineral Resources with an X-Ray-Optical "Hands-Lens" Instrument

The recognition of material resources on a planetary surface requires exploration strategies not dissimilar to those employed by early field geologists who searched for ore deposits primarily from surface clues. In order to determine the location of mineral ores or other materials, it will be necessary to characterize host terranes at regional or subregional scales. This requires geographically broad surveys in which statistically significant numbers of samples are rapidly scanned from a roving platform. To enable broad-scale, yet power-conservative planetary-surface exploration, we are developing an instrument that combines x-ray diffractometry (XRD), x-ray fluorescence spectrometry (XRF), and optical capabilities; the instrument can be deployed at the end of a rover's robotic arm, without the need for sample capture or preparation. The instrument provides XRD data for identification of mineral species and lithological types; diffractometry of minerals is conducted by ascertaining the characteristic lattice parameters or "d-spacings" of mineral compounds. D-spacings of 1.4 to 25 angstroms can be determined to include the large molecular structures of hydrated minerals such as clays. The XRF data will identify elements ranging from carbon (Atomic Number = 6) to elements as heavy as barium (Atomic Number = 56). While a sample is being x-rayed, the instrument simultaneously acquires an optical image of the sample surface at magnifications from lx to at least 50x (200x being feasible, depending on the sample surface). We believe that imaging the sample is extremely important as corroborative sample-identification data (the need for this capability having been illustrated by the experience of the Pathfinder rover). Very few geologists would rely on instrument data for sample identification without having seen the sample. Visual inspection provides critical recognition data such as texture, crystallinity, granularity, porosity, vesicularity, color, lustre, opacity, and so forth. These data can immediately distinguish sedimentary from igneous rocks, for example, and can thus eliminate geochemical or mineral ambiguities arising, say between arkose and granite. It would be important to know if the clay being analyzed was part of a uniform varve deposit laid down in a quiescent lake, or the matrix of a megabreccia diamictite deposited as a catastrophic impact ejecta blanket. The unique design of the instrument, which combines Debye-Scherrer geometry with elements of standard goniometry, negates the need for sample preparation of any kind, and thus negates the need for power-hungry and mechanically-complex sampling systems that would have to chip, crush, sieve, and mount the sample for x-ray analysis. Instead, the instrument is simply rested on the sample surface of interest (like a hand lens); the device can interrogate rough rock surfaces, coarse granular material, or fine rock flour. A breadboard version of the instrument has been deployed from the robotic arm of the Marsokhod rover in field trials at NASA Ames, where large vesicular boulders were x-rayed to demonstrate the functionality of the instrument design, and the ability of such a device to comply with constraints imposed by a roving platform. Currently under development is a flight prototype concept of this instrument that will weigh 0.3 kg, using about 4500 J of energy per sample analysis. It requires about 5 min. for XRD analysis, and about 30 min. for XRF interrogation. Its small mass and rugged design make it ideal for deployment on small rovers of the type currently envisaged for the exploration of Mars (e.g., Sojourner-scale platforms). The design utilizes a monolithic P-N junction photodiode pixel array for XRD, a Si PIN photodiode/avalanche photodiode system for XRF, and an endoscopic imaging camera system unobtrusively embedded between the detectors and the x-ray source (the endoscope with its board-mounted camera can be adapted for IR light in addition to visible wavelenths. A rugged, miniature (7 cu cm) x-ray source for the instrument has already been breadboarded.

Marshall, J.↗

DOE OSTI2025

Single-atom Zr promoter boosts oxygen activation on ceria-supported Pt catalysts

Activation of surface lattice oxygen and chemisorbed oxygen on catalyst surfaces constitutes a pivotal step in heterogeneous oxidative catalysis. Herein, we report a strategy for enhancing oxygen activation by rational design of catalysts with single-atom promoters. Single-site Zr species in CeO 2 (Zr 1 -CeO 2 ) are synthesized using the atom-trapping method. The Zr 1 -CeO 2 -supported Pt catalyst exhibits enhanced catalytic performance over the CeO 2 -supported Pt catalyst in the oxidation of CO, C 3 H 8 , and C 3 H 6 , achieving significantly lower T 50 values (temperature required to reach 50% conversion). This enhanced catalytic activity is attributed to the formation of an asymmetric Zr 1 -O-Pt 1 structure, which favors the activation of the adjacent surface lattice oxygen and chemisorbed molecular oxygen. This work exemplifies that incorporating single-site atoms into oxide support facilitates oxygen activation, providing new insights into the role of atomically dispersed promoters in heterogeneous catalysis.

Science & Technology - Other Topics↗

DOE OSTI2025

Efficient analysis of small-angle scattering curves for large biomolecular assemblies using Monte Carlo methods

Structure elucidation from small-angle scattering curves of large biomolecular assemblies is notoriously challenging. This is because the simulation of high-resolution features in the structure of large macromolecular assemblies, such as de novo protein assemblies, is computationally demanding when it needs to cover a broad range of length scales. Conventional methods, such as the numerical approximation to the Debye equation or the use of spherical harmonics, do not scale well as the size of the assembly increases, which limits their application to small structures (e.g. individual proteins). This work explores the effectiveness of a Monte Carlo method to simulate and fit scattering curves for large biomolecular assemblies spanning over ranges covering atomic and molecular detail (e.g. spacing and orientation of proteins in an assembly) as well as large-scale (hundreds of nanometres) features. Owing to its speed and scalability, it can be combined with a fitting algorithm to extract structural features from experimental small-angle scattering curves in biomolecular assemblies that are otherwise intractable for interpretation. This work first demonstrates the effectiveness of the tool using experimental small-angle X-ray scattering (SAXS) data from tile-like proteins that assemble into 1D tube-like macromolecular structures. Here, the diameter distribution of tubes is extracted from SAXS fits, and this is quantitatively compared with distributions from electron microscopy. SAXS data are also obtained from 2D sheet-like protein assemblies, and the proposed method is used to quantify structural features such as the separation distance between protein building blocks and the flexing of the sheet. An open-source implementation of the methodology is provided for use in a broad range of biological systems involving multi-scale scattering analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗