Search NASA⌕ Search

SEARCH · Search NASA

Results for “averaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Average hydrodynamic radius analysis reveals critical solvation thresholds in high-concentration lithium electrolytes

Understanding the solvation structures of lithium salts in carbonate- and ether-based electrolytes is central to explaining the exceptional stability of high-concentration electrolytes (HCEs) and localized high-concentration electrolytes (LHCEs). Conventional techniques such as vibrational spectroscopy and one-dimensional NMR provide only limited information, typically restricted to coordination ratios and ion-pair distributions, without revealing the actual size and mass of solution complexes. Here, in this study, we introduce an average hydrodynamic radius (AHR) analysis based on internally referenced DOSY NMR, which enables direct estimation of the average volume and molecular weight of lithium–solvent complexes in solution. Using LiFSI–EMC and LiFSI–EMC–TTE electrolytes, we demonstrate that the onset of effective lithium metal stabilization and aluminum corrosion suppression coincides with the formation of very large complexes, whose average volume exceeds 300 times that of free EMC molecules. This finding supports a new “blocking mechanism,” wherein bulky solvated complexes impede direct solvent access to reactive surfaces. The AHR analysis thus not only clarifies the fundamental origin of HCE and LHCE effectiveness, but also provides a broadly applicable experimental framework for probing complex solvation structures and guiding rational electrolyte design.

Concentrated electrolytes↗
DOE OSTI2025

Tailoring coherent beam combined laser pulse trains for high peak and average power applications

Laser systems based on coherent beam combination (CBC) that rely on tiled pupil architecture intrinsically carry digital capabilities independently applicable to all three essential characteristics of a laser pulse: amplitude, phase and polarization. Those capabilities allow the far-field energy distribution to be flexibly tailored in real time. Operation in the femtosecond regime at high repetition rates gives access to a wide range of applications requiring both high peak and average powers. We address the task of independent peak versus average power adjustment needed for applications seeking to decouple nonlinear phenomena associated with GW peak power from the thermal load inherent to kW average power operation. The technical solutions proposed are presented in the framework of the Ecole Polytechnique XCAN CBC laser platform (61 independent channels) with an emphasis on thermal management measures implemented to ensure its nominal operation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Areal-Averaged Surface Albedo (ArealAveAlb) Value-Added Product

The surface albedo plays an important role in the Earth's radiation balance. This report provides information on how to estimate areal-averaged surface albedo from ground-based measurements of solar radiation at five wavelengths (415,500,615,675, and 870 nm). The report first explains why this estimation is important and challenging. Then the report defines both the required and complimentary inputs for the corresponding Areal-Averaged Surface Albedo (ArealAveAlb) Value-Added Product (VAP) and highlights the major outputs of this VAP. The following section explains how estimation of the areal-averaged surface albedo at four wavelengths (500,615,675, and 870 nm) can be performed for different surface types, including those partly covered by snow. The final section provides three examples that illustrate the VAP’s performance and emphasizes the benefits of complementary inputs, such as distinct cloud types and precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Stochastic Averaging of Radiative Transfer Coefficients for Relativistic Electrons

Abstract Synchrotron emissivities, absorptivities, and Faraday rotation and conversion coefficients are needed in modeling a variety of astrophysical sources, including Event Horizon Telescope (EHT) sources. We develop a method for estimating transfer coefficients that exploits their linear dependence on the electron distribution function, decomposing the distribution function into a sum of parts each of whose emissivity can be calculated easily. We refer to this procedure as stochastic averaging and apply it in two contexts. First, we use it to estimate the emissivity of an isotropicκdistribution function with a high-energy cutoff. The resulting coefficients can be evaluated efficiently enough to be used directly in ray-tracing calculations, and we provide an example calculation. Second, we use stochastic averaging to assess the effect of subgrid turbulence on the volume-averaged emissivity and along the way provide a prescription for a turbulent emissivity. We find that for parameters appropriate to EHT sources turbulence reduces the emissivity slightly. In the infrared, turbulence can dramatically increase the emissivity.

Astronomy & Astrophysics↗
NASA NTRS1962

Theoretical estimates of the average surface temperature on mars

Estimates of the average surface temperature on Mars are derived from radiative equilibrium considerations. A minimum possible surface temperature is estimated by computing the radiative equilibrium temperature that the Martian surface would have if the planet had no atmosphere. An estimate of the maximum possible value of the average surface temperature is obtained by computing the surface temperature that would result from a maximum greenhouse model. The computations indicate that the average surface temperature is in the range 219K to 233K. Comparisons of the theoretical computations with indications of surface temperature obtained from thermal emission observations are found to be in reasonable agreement.

Surface temperature↗
NASA NTRS1972

Numerical averaging in orbit prediction.

This paper is a presentation of some useful aspects of a numerical averaging technique that has been applied with considerable success to the orbit prediction problem for artificial satellites. The method has been tested in a variety of situations wherein the satellite is subjected to combinations of perturbations for which adequate analytic theories are practically impossible. The technique provides many of the advantages of analytic averaging while retaining the ability to simulate the effects of any kind of small force that can be deterministically modeled. The theoretical basis for the method is straightforward but the details of its implementation are somewhat confusing and need some explanation. A particularly useful set of averaged equations is presented along with a description of an efficient algorithm for their solution. Examples of the advantages to be obtained by use of the method are included.

Uphoff, C.↗
NASA NTRS1973

The average chemical composition of the lunar surface

The available analytical data from twelve locations on the moon are used to estimate the average amounts of the principal chemical elements (O, Na, Mg, Al, Si, Ca, Ti, and Fe) in the mare, the terra, and the average lunar surface regolith. These chemical elements comprise about 99% of the atoms on the lunar surface. The relatively small variability in the amounts of these elements at different mare (or terra) sites, and the evidence from the orbital measurements of Apollo 15 and 16, suggest that the lunar surface is much more homogeneous than the surface of the earth. The average chemical composition of the lunar surface may now be known as well as, if not better than, that of the solid part of the earth's surface.

Turkevich, A. L.↗
NASA NTRS1952

Experimental Investigation of Average Heat-Transfer and Friction Coefficients for Air Flowing in Circular Tubes Having Square-Thread-Type Roughness

An investigation of forced-convection heat transfer and associated pressure drops was conducted with air flowing through electrically heated Inconel tubes having various degrees of square-thread-type roughness, an inside diameter of 1/2 inch, and a length of 24 inches. were obtained for tubes having conventional roughness ratios (height of thread/radius of tube) of 0 (smooth tube), 0.016, 0.025, and 0.037 over ranges of bulk Reynolds numbers up to 350,000, average inside-tube-wall temperatures up to 1950deg R, and heat-flux densities up to 115,000 Btu per hour per square foot. Data The experimental data showed that both heat transfer and friction increased with increase in surface roughness, becoming more pronounced with increase in Reynolds number; for a given roughness, both heat transfer and friction were also influenced by the tube wall-to-bulk temperature ratio. Good correlation of the heat-transfer data for all the tubes investigated was obtained by use of a modification of the conventional Nusselt correlation parameters wherein the mass velocity in the Reynolds number was replaced by the product of air density evaluated at the average film temperature and the so-called friction velocity; in addition, the physical properties of air were evaluated at the average film temperature. The isothermal friction data for the rough tubes, when plotted in the conventional manner, resulted in curves similar to those obtained by other investigators; that is, the curve for a given roughness breaks away from the Blasius line (representing turbulent flow in smooth tubes) at some value of Reynolds number, which decreases with increase in surface roughness, and then becomes a horizontal line (friction coefficient independent of Reynolds number). A comparison of the friction data for the rough tubes used herein indicated that the conventional roughness ratio is not an adequate measure of relative roughness for tubes having a square-thread-type element. The present data, as well as those of other investigators, were used to isolate the influence of ratios of thread height to width, thread spacing to width, and the conventional roughness ratio on the friction coefficient. A fair correlation of the friction data was obtained for each tube with heat addition when the friction coefficient and Reynolds number were defined on the basis of film properties; however, the data for each tube retained the curve characteristic of that particular roughness. The friction data for all the rough tubes could be represented by a single line for the complete turbulence region by incorporating a roughness parameter in the film correlation. No correlation was obtained for the region of incomplete turbulence.

Sams, E. W.↗
NASA NTRS1975

Averaged initial Cartesian coordinates for long lifetime satellite studies

A set of initial Cartesian coordinates, which are free of ambiguities and resonance singularities, is developed to study satellite mission requirements and dispersions over long lifetimes. The method outlined herein possesses two distinct advantages over most other averaging procedures. First, the averaging is carried out numerically using Gaussian quadratures, thus avoiding tedious expansions and the resulting resonances for critical inclinations, etc. Secondly, by using the initial rectangular Cartesian coordinates, conventional, existing acceleration perturbation routines can be absorbed into the program without further modifications, thus making the method easily adaptable to the addition of new perturbation effects. The averaged nonlinear differential equations are integrated by means of a Runge Kutta method. A typical step size of several orbits permits rapid integration of long lifetime orbits in a short computing time.

Pines, S.↗
NASA NTRS1975

A time-averaged cosmic ray propagation theory

An argument is presented, which casts doubt on our ability to choose an appropriate magnetic field ensemble for computing the average behavior of cosmic ray particles. An alternate procedure, using time-averages rather than ensemble-averages, is presented.

Klimas, A. J.↗
NASA NTRS1976

The singly averaged differential equations of satellite motion for e greater than or equal to 0 and less than 1

The singly-averaged differential equations of motion of a satellite are developed in terms of parameters valid for all eccentricities less than one. The perturbations included in the acceleration model are due to an aspherical central planet (zonal harmonics up to degree 20 and resonant harmonics up to degree and order 20), atmospheric drag for a time-varying atmosphere, third-body gravity (the sun and moon for an earth satellite), solar radiation pressure with shadowing, and impulsive maneuvers. Analytic averaging is used to remove short-period terms due to the aspherical central planet and third-body gravity. Numerical averaging is used to remove short-period terms due to atmospheric drag and solar radiation pressure.

Dallas, S. S.↗
NASA NTRS1976

Terrestrial kilometric radiation: 3-average spectral properties

A study is presented of the average spectral properties of terrestrial kilometric radiation (TKR) derived from observations made by radio astronomy experiments onboard the IMP-6 and RAE-2 spacecraft. As viewed from near the equatorial plane, TKR is most intense and most often observed in the 21-24 hr local time zone and is rarely seen in the 09-12 hr zone. The peak flux density usually occurs near 240 kHz, but there is evidence that the peak occurs at a somewhat lower frequency on the dayside. The frequency of the peak in the average flux spectrum varies inversely with increasing substorm activity as inferred from the auroral electrojet index (AE) from a maximum near 300 kHz during very quiet times to a minimum below 200 kHz during very disturbed times. The absolute flux levels in the 100-600 kHz TKR band increase significantly with increasing AE. The average power associated with a particular source region seems to decrease rapidly with increasing source altitude.

Kaiser, M. L.↗
NASA NTRS1977

On the high correlation between long-term averages of solar wind speed and geomagnetic activity

Six-month and yearly averages of solar-wind speed from 1962 to 1975 are shown to be highly correlated with geomagnetic activity as measured by averages of the Ap index. On the same time scale the correlation between the southward component of the interplanetary magnetic field and geomagnetic activity is poor. Previous studies with hourly averages gave opposite results. The better correlation with the southward component on an hourly time scale is explained by its large variation compared with the relatively constant solar-wind speed. However, on a yearly time scale the magnitude of the variations in both parameters are about the same. This problem can be solved by invoking an energy transfer mechanism which is proportional to the first power of the southward component and a higher power of the solar-wind speed.

Crooker, N. U.↗
NASA NTRS1978

A note on the diurnal averaging of aeronomical models

An approximate technique for diurnally time-averaging atmospheric photochemical-dynamical models which eliminates the need for a detailed numerical resolution of sunrise and sunset transitions is developed. The scheme is equivalent to scaling certain chemical rate constants and photodissociation coefficients by appropriate aeronomical factors. To calculate the scaling factors, diurnal variations are parameterized with a step-function behavior, assuming that each species has a constant day-time and night-time concentration whose ratio can be determined by analyzing the chemical interactions occurring after sunset. The solution accounts for the effects of night-time reactions on the 24 h average values of species abundances, and on the average daily rates of the catalytic processes consuming ozone in the stratosphere. The accuracy of the technique is demonstrated by comparing its predictions to those of a full diurnal simulation; typically, the precision is better than 10%. By contrast, it is shown that the use of some other well-known computational schemes can result in significantly larger predictive errors.

Turco, R. P.↗
NASA NTRS1978

A note on the averaging method

A simple problem of a two-body system perturbed by the disturbing function epsilon/r-squared is considered to show that the time-averaged equations of the true and mean anomaly are not necessarily equal. Secular effects due to perturbations in the mean and true anomalies are different not only in value but also in sign. A more general case where the disturbing function is periodic with respect to the mean anomaly is also considered. Here a discrepancy in the time-averaged solutions is due to the fact that the mean anomaly is an action-angle variable conjugate to the action variable L, while the true anomaly is not. When the action-angle variables are chosen as dependent variables, the Hamiltonian is a function only of action variables. One must first derive first-order solutions, substitute them into the right-hand side of the equations of motion, and then take time averages.

Kinoshita, H.↗
NASA NTRS1979

Improvement of scanning radiometer performance by digital reference averaging

Most radiometers utilize a calibration technique in which measurements of a known reference are subtracted from measurements of an unknown source so that common-mode bias errors are cancelled. When a radiometer is scanned over a varying scene, it produces a sequence of outputs, each being proportional to the difference between the reference and the corresponding input. A reference averaging technique is presented that employs a simple digital algorithm which exploits the asymmetry between the time-variable scene inputs and the nominally constant reference input by averaging many reference measurements to decrease the statistical uncertainty in the reference value. This algorithm is, therefore, optimized by an asymmetric chopping sequence in which the scene is viewed for more than one-half of the duty cycle (unlike the analog Dicke technique). Reference averaging algorithms are well within the capabilities of small microprocessors. Although this paper develops the technique for microwave radiometry, it may be beneficial for any system which measures a large number of unknowns relative to a known reference in the presence of slowly varying common-mode errors.

Bremer, J. C.↗
NASA NTRS1979

On the angle between the average interplanetary magnetic field and the propagation direction of plane large amplitude Alfven waves

The paper shows that the experimentally observed close alignment of magnetic field minimum variance direction with the average magnetic field for Alfven waves in the solar wind is consistent with theoretically predicted properties of plane large amplitude Alfven waves in the MHD approximation. The theoretical properties of these Alfven waves constrain the time averaged magnetic field to cluster around the direction of minimum variance, which is aligned with the wave normal. Thus, spacecraft magnetometer observations in the solar wind of minimum variance directions strongly peaked about the average magnetic field direction are consistent with plane large amplitude Alfven waves which have wave normals aligned with the directions of minimum variance. This does not imply that geometrical hydromagnetic calculations for Alfven wave propagation direction in the solar wind are incorrect, but there is a discrepancy between geometrical hydromagnetics theory and observations that IMF minimum variance directions tend to be aligned with the ideal Parker spiral instead of the radial direction.

Lichtenstein, B. R.↗