SEARCH · Search NASA

Results for “avionics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Organization and use of a Software/Hardware Avionics Research Program (SHARP)

The organization and use is described of the software/hardware avionics research program (SHARP) developed to duplicate the automatic portion of the STOLAND simulator system, on a general-purpose computer system (i.e., IBM 360). The program's uses are: (1) to conduct comparative evaluation studies of current and proposed airborne and ground system concepts via single run or Monte Carlo simulation techniques, and (2) to provide a software tool for efficient algorithm evaluation and development for the STOLAND avionics computer.

Karmarkar, J. S.↗

NASA NTRS1976

The implementation of fail-operative functions in integrated digital avionics systems

System architectures which incorporate fail operative flight guidance functions within a total integrated avionics complex are described. It is shown that the mixture of flight critical and nonflight critical functions within a common computer complex is an efficient solution to the integration of navigation, guidance, flight control, display, and flight management. Interfacing subsystems retain autonomous capability to avoid vulnerability to total avionics system shutdown as a result of only a few failures.

Osoer, S. S.↗

NASA NTRS1975

Tug avionics system overview

The recently defined Tug avionics system takes maximum advantage of projected technology advances to attain: low system weight; power system capacity essentially independent of mission duration; sensors for rendezvous, docking, and navigation update; all attitude communications; onboard checkout and redundancy management; and modular fault tolerant computer control. The requirements, selection trades, and configurations are discussed for the major subsystems: data management, guidance navigation and control, communications, rendezvous and docking, and electrical power. The integrated avionics system and the interfaces with the payload, Shuttle and ground are described.

Raaberg, M. T.↗

NASA NTRS1976

An avionics sensitivity study. Volume 2: Evaluation of airborne navigation system performance during RNAV/MLS transition

A computer simulation was modified to generate a suitable data base for performance of an avionics sensitivity study during RNAV/MLS transition. The avionics sensitivity data provides information necessary to establish requirements for additional guidance law design during transition and to establish airspace requirements for maneuvering to null out any residual RNAV errors upon MLS transition. The data base is also beneficial as planning information for subsequent flight testing.

Heine, W.↗

NASA NTRS1977

Sail GTS ground system analysis: Avionics system engineering

A comparison of two different concepts for the guidance, navigation and control test set signal ground system is presented. The first is a concept utilizing a ground plate to which crew station, avionics racks, electrical power distribution system, master electrical common connection assembly and marshall mated elements system grounds are connected by 4/0 welding cable. An alternate approach has an aluminum sheet interconnecting the signal ground reference points between the crew station and avionics racks. The comparison analysis quantifies the differences between the two concepts in terms of dc resistance, ac resistance and inductive reactance. These parameters are figures of merit for ground system conductors in that the system with the lowest impedance is the most effective in minimizing noise voltage. Although the welding cable system is probably adequate, the aluminum sheet system provides a higher probability of a successful system design.

Lawton, R. M.↗

NASA NTRS1978

Exploring team avionics systems by simulation

Configurations of software and hardware in a no-critical-element team architecture are under study for future general aviation aircraft avionics. The team integrated avionics system, based on microprocessors, can monitor and partially interpret all flight instrument data, engine parameters, and navigation information faster than a human pilot. Simulation programs based on an event-oriented simulation language are being used to design team architectures.

Brent, G. A.↗

NASA NTRS1980

V/STOLAND avionics system flight-test data on a UH-1H helicopter

The flight-acceptance test results obtained during the acceptance tests of the V/STOLAND (versatile simplex digital avionics system) digital avionics system on a Bell UH-1H helicopter in 1977 at Ames Research Center are presented. The system provides navigation, guidance, control, and display functions for NASA terminal area VTOL research programs and for the Army handling qualities research programs at Ames Research Center. The acceptance test verified system performance and contractual acceptability. The V/STOLAND hardware navigation, guidance, and control laws resident in the digital computers are described. Typical flight-test data are shown and discussed as documentation of the system performance at acceptance from the contractor.

Baker, F. A.↗

NASA NTRS1980

Avionics and controls in review

The article surveys the changes which will occur in avionics and controls due to microprocessor technology. Attention is given to five broadly applicable technologies: (1) flight path management technology, (2) automatic control systems, (3) crew station technology, (4) integration and interfacing technology, and (5) fundamental technologies. Areas discussed include inertial navigation, guidance, weather avoidance, propulsion control systems, display technology, flight-system management, functional integration of avionics, and airborne information processing.

Smyth, R. K.↗

NASA NTRS1978

Predicting Cost/Reliability/Maintainability of Advanced General Aviation Avionics Equipment

A methodology is provided for assisting NASA in estimating the cost, reliability, and maintenance (CRM) requirements for general avionics equipment operating in the 1980's. Practical problems of predicting these factors are examined. The usefulness and short comings of different approaches for modeling coast and reliability estimates are discussed together with special problems caused by the lack of historical data on the cost of maintaining general aviation avionics. Suggestions are offered on how NASA might proceed in assessing cost reliability CRM implications in the absence of reliable generalized predictive models.

Davis, M. R.↗

NASA NTRS1979

Avionics and displays in a future airspace system

The terminal configured vehicle (TCV) program was conceived to address the problems of (1) operation in the crowded terminal area airspace, and (2) integration of airborne avionics systems necessary to improve the efficiency of these operations. The program and its interaction with industry task groups are summarized, including elements of research and data collection. New technology is discussed which may be useful in implementing some defined avionics and display requirements.

Salmirs, S.↗

NASA NTRS1981

Description of a dual fail-operational redundant strapdown inertial measurement unit for integrated avionics systems research

Attention is given to a redundant strapdown inertial measurement unit for integrated avionics. The system consists of four two-degree-of-freedom turned rotor gyros and four two-degree-of-freedom accelerometers in a skewed and separable semi-octahedral array. The unit is coupled through instrument electronics to two flight computers which compensate sensor errors. The flight computers are interfaced to the microprocessors and process failure detection, isolation, redundancy management and flight control/navigation algorithms. The unit provides dual fail-operational performance and has data processing frequencies consistent with integrated avionics concepts presently planned.

Bryant, W. H.↗

NASA NTRS1981

Measurement of fault latency in a digital avionic miniprocessor

The results of fault injection experiments utilizing a gate-level emulation of the central processor unit of the Bendix BDX-930 digital computer are presented. The failure detection coverage of comparison-monitoring and a typical avionics CPU self-test program was determined. The specific tasks and experiments included: (1) inject randomly selected gate-level and pin-level faults and emulate six software programs using comparison-monitoring to detect the faults; (2) based upon the derived empirical data develop and validate a model of fault latency that will forecast a software program's detecting ability; (3) given a typical avionics self-test program, inject randomly selected faults at both the gate-level and pin-level and determine the proportion of faults detected; (4) determine why faults were undetected; (5) recommend how the emulation can be extended to multiprocessor systems such as SIFT; and (6) determine the proportion of faults detected by a uniprocessor BIT (built-in-test) irrespective of self-test.

Mcgough, J. G.↗

NASA NTRS1981

Avionics test bed development plan

A development plan for a proposed avionics test bed facility for the early investigation and evaluation of new concepts for the control of large space structures, orbiter attached flex body experiments, and orbiter enhancements is presented. A distributed data processing facility that utilizes the current laboratory resources for the test bed development is outlined. Future studies required for implementation, the management system for project control, and the baseline system configuration are defined. A background analysis of the specific hardware system for the preliminary baseline avionics test bed system is included.

Harris, L. H.↗

NASA NTRS1982

Demonstration Advanced Avionics System (DAAS) function description

The Demonstration Advanced Avionics System, DAAS, is an integrated avionics system utilizing microprocessor technologies, data busing, and shared displays for demonstrating the potential of these technologies in improving the safety and utility of general aviation operations in the late 1980's and beyond. Major hardware elements of the DAAS include a functionally distributed microcomputer complex, an integrated data control center, an electronic horizontal situation indicator, and a radio adaptor unit. All processing and display resources are interconnected by an IEEE-488 bus in order to enhance the overall system effectiveness, reliability, modularity and maintainability. A detail description of the DAAS architecture, the DAAS hardware, and the DAAS functions is presented. The system is designed for installation and flight test in a NASA Cessna 402-B aircraft.

Bailey, A. J.↗

NASA NTRS1983

Design, development, and flight test of a demonstration advanced avionics system

Ames Research Center initiated a program in 1975 to provide the critical information required for the design of integrated avionics suitable for general aviation. The program emphasized the use of data busing, distributed microprocessors, shared electronic displays and data entry devices, and improved functional capability. Design considerations included cost, reliability, maintainability, and modularity. As a final step, a demonstration advanced avionics system (DAAS) was designed, built, and flight tested in a Cessna 402, twin engine, general aviation aircraft. A functional description of the DAAS, including a description of the system architecture, is presented and the program and flight test results are briefly reviewed.

Denergy, D. G.↗

NASA NTRS1983

NASA Demonstration Advanced Avionics System (DAAS)

The Demonstration Advanced Avionics Systems (DAAS) integrates a comprehensive set of general aviation avionics functions into an advanced system architecture for demonstration in a Cessna 402 aircraft. A cursory functional description of the DAAS complex is given. Microprocessors, computer architecture, and display devices are discussed.

Peterson, E. M.↗

NASA NTRS1983

Design, development and flight test of a demonstration advanced avionics system

The design of integrated avionics suitable for general aviation was examined. The program emphasizes the use of data busing, distributed microprocessors, shared electronic displays and data entry devices, and improved functional capability. Design considerations includes cost, reliability, maintainability, and modularity. A demonstration advanced avionics system (DAAS) was designed, built, and flight tested in a Cessna 402, twin engine, general aviation aircraft. The DAAS, and the system architecture are described.

Denery, D. G.↗

NASA NTRS1982

Preliminary results from the NASA general aviation demonstration advanced avionics system program

NASA's Demonstration Advanced Avionics System (DAAS) is an integrated avionics system employing microprocessor technologies, data busing, and shared electronics displays. A DAAS demonstration system has been assessed through flight testing and demonstration for potential users which includes among its functions autopiloting, navigation/flight planning, a flight warning and advisory system, performance computations, normal and emergency checklists, and a ground simulation function. Exceptional performance has been obtained from the DAAS electronic horizontal situation indicator, the autopilot, the navigator/flight planner, and the discrete address beacon system.

Hardy, G. H.↗