Results for “cargo transport” — Page 9

NASA NTRS2019

Challenges of Designing a Passive Thermal Control System for the Astrobotic Peregrine Lunar Lander

The Astrobotic Peregrine is a lunar lander currently undergoing design by Astrobotic Technology with help from NASA through the Lunar Cargo Transportation and Landing by Soft Touchdown (Lunar CATALYST) program. This paper will discuss the challenges of designing a passive thermal control system for the lander, and how the design has evolved from the initial passive concept. These challenges include drastically varying worst hot and worst cold case thermal environments, narrow temperature limits of critical components, limited available locations for spacecraft component mounting, and unexpected changes causing significant thermal impacts. The initial thermal control strategy was to cold bias the spacecraft by thermally coupling all spacecraft components to one mounting deck, which also doubled as a radiator, and using heaters to maintain each component’s temperature above its lower temperature limit when in the cold environments. As the design evolved, this strategy alone became inadequate. As heat dissipations increased and became more varying with the addition of components, the thermal design was changed and additional thermal control technologies added. Thermal control strategies incorporated into the design include dictating the lander orientation in demanding environments, defining locations for critical spacecraft components, limiting component operation when possible, and using technology to create variable thermal contacts. Additional design changes will occur as the design continues to evolve to optimize the most effective thermal control system. The thermal design of Peregrine is still in progress, with Critical Design Review (CDR) scheduled for December 2019.

Mauro, Stephanie↗

NASA NTRS2019

A Streamlined Approach to Spatial Mapping of Complex 3D Thermal Boundary Condition Data

Spatial mapping of 1D, 2D, and particularly 3D thermal boundary condition data is essential for accurate thermal simulation of spacecraft and launch vehicles. This information typically is available in simple ASCII file format but can be problematic to use for thermal simulations. Difficulties that can be encountered include the ability to directly use the available file format, transformation of the data into the desired reference coordinate system in 3D space, and accurate interpolation of the data onto the thermal calculation domain. This paper presents a streamlined approach to spatial mapping of complex unsymmetrical 3D cold wall heat flux data using the fields’ capability in Simcenter3D. A recent example of 3D thermal plume simulation at MSFC will be employed to illustrate the use of text, csv, and Excel files, specifying coordinate systems for transformation of data in 3D space, and use of the various interpolation schemes available for spatial mapping. Spatial boundary condition verification is also very important, and the spacecraft thermal analyst needs effective visualization tools to develop confidence in the boundary condition definitions. Visualization of the spacecraft plume raw field data, the calculated field data, and the interpolated field data onto the thermal calculation domain will be discussed, with a particular focus on real-time viewing of the interpolated data for available interpolation schemes. The objective of this paper is to outline the modeling techniques used with the integrated thermal analysis of a terrestrial lunar lander demonstrator. Specifically, the techniques outlined herein focus on spatial mapping of convective and radiative exhaust plume results from a computational fluid dynamics (CFD) analysis. Two cases were investigated, however, the modeling techniques that were utilized translate to both cases seamlessly. Those two cases were as follows: • Lunar lander demonstrator firing on-pad (worst case). • Lunar lander demonstrator hovering at an elevated position above the launch pad. For the purposes of information control, this paper will focus on the modeling techniques only, using altered or dimensionless data where necessary. BACKGROUND The thermal model examined in this paper is of the lunar lander demonstrator known as XL-1T (terrestrial), born from a collaborative effort between Masten Space Systems (MSS) and NASA, under NASA’s Lunar CATALYST (also known as Lunar Cargo Transportation and Landing by Soft Touchdown) initiative. The lander is a reusable vertical takeoff/vertical landing (VTVL) test bed which is controlled by four throttleable main engines utilizing green hypergolic propellants.

Hawkins, Robert F.↗

NASA NTRS2017

Lunar COTS Mission Concept: Using the Moon's Resources to Enable an Economical and Sustainable Pathway to Mars and Beyond

To support and enable future human missions to the surface of the Moon, a new plan was formulated to gradually develop an economical, evolvable and sustainable lunar infrastructure using a public/private partnerships between NASA and industry to share cost and risk in the development phase and ultimately transfer operation of these infrastructure services to its industry owners. These infrastructure services may include but are not limited to the following: lunar cargo transportation, power stations, energy storage devices, communication towers and relay satellites, and resource extraction operations. The plan is called the Commercial Orbital Transfer Services (COTS) Program, using NASA's well-proven Commercial Orbital Transportation Services (COTS) Program acquisition model.

Zuniga, A. F.↗

NASA NTRS2019

13kW Advanced Electric Propulsion Flight System Development and Qualification

The next phase of robotic and human deep space exploration missions requires high performance, high power solar electric propulsion systems for large-scale science missions and cargo transportation. Aerojet Rocketdyne's Advanced Electric Propulsion System (AEPS) program is completing development and qualification of a 13kW flight EP system to support NASA exploration. The first use of the AEPS is planned for the NASA Power & Propulsion Element, which is the first element of NASA's cis-lunar Gateway. The flight AEPS system includes a magnetically shielded long-life Hall thruster, power processing unit (PPU), and xenon flow controller (XFC). The Hall thruster, originally developed and demonstrated by NASA's Glenn Research Center and the Jet Propulsion Laboratory, operates at input powers up to 13.3kW while providing a specific impulse over 2600s at an input voltage of 600V. The power processor is designed to accommodate an input voltage range of 95 to 140V, consistent with operation beyond the orbit of Mars. The integrated system is continuously throttleable between 3 and 13.3kW. The program has completed testing of the Technology Development Units and is progressing into the Engineering Development Unit test phase and the final design phase to Critical Design Review (CDR). This paper will present the high power AEPS system capabilities, overall program and design status and the latest test results for the 13kW flight system development as well as the plans for the development and qualification effort of the EP string.

in-space propulsion↗

NASA NTRS2019

13kW Advanced Electric Propulsion Flight System Development and Qualification

The next phase of robotic and human deep space exploration missions requires high performance, high power solar electric propulsion systems for large-scale science missions and cargo transportation. Aerojet Rocketdyne's Advanced Electric Propulsion System (AEPS) program is completing development and qualification of a 13kW flight EP system to support NASA exploration. The first use of the AEPS is planned for the NASA Power & Propulsion Element, which is the first element of NASA's cis-lunar Gateway. The flight AEPS system includes a magnetically shielded long-life Hall thruster, power processing unit (PPU), and xenon flow controller (XFC). The Hall thruster, originally developed and demonstrated by NASA's Glenn Research Center and the Jet Propulsion Laboratory, operates at input powers up to 13.3kW while providing a specific impulse over 2600s at an input voltage of 600V. The power processor is designed to accommodate an input voltage range of 95 to 140V, consistent with operation beyond the orbit of Mars. The integrated system is continuously throttleable between 3 and 13.3kW. The program has completed testing of the Technology Development Units and is progressing into the Engineering Development Unit test phase and the final design phase to Critical Design Review (CDR). This paper will present the high power AEPS system capabilities, overall program and design status and the latest test results for the 13kW flight system development as well as the plans for the development and qualification effort of the EP string.

in-space propulsion↗

NASA NTRS2020

Urban Air Mobility System Testbed Using CAVE Virtual Reality Environment

Urban Air Mobility (UAM) refers to a system of air passenger and small cargo transportation within an urban area. The UAM framework also includes other urban Unmanned Aerial Systems (UAS) services that will be supported by a mix of onboard, ground, piloted, and autonomous operations. Over the past few years UAM research has gained wide interest from companies and federal agencies as an on-demand innovative transportation option that can help reduce traffic congestion and pollution as well as increase mobility in metropolitan areas. The concepts of UAM/UAS operation in the National Airspace System (NAS) remains an active area of research to ensure safe and efficient operations. With new developments in smart vehicle design and infrastructure for air traffic management, there is a need for methods to integrate and test various components of the UAM framework. In this work, we report on the development of a virtual reality (VR) testbed using the Cave Automatic Virtual Environment (CAVE) technology for human-automation teaming and airspace operation research of UAM. Using a four-wall projection system with motion capture, the CAVE provides an immersive virtual environment with real-time full body tracking capability. We created a virtual environment consisting of San Francisco city and a vertical take-off-and-landing passenger aircraft that can fly between a downtown location and the San Francisco International Airport. The aircraft can be operated autonomously or manually by a single pilot who maneuvers the aircraft using a flight control joystick. The interior of the aircraft includes a virtual cockpit display with vehicle heading, location, and speed information. The system can record simulation events and flight data for post-processing. The system parameters are customizable for different flight scenarios; hence, the CAVE VR testbed provides a flexible method for development and evaluation of UAM framework.

Marayong, Panadda↗

NASA NTRS2020

Understanding Risk in Urban Air Mobility: Moving Towards Safe Operating Standards

Urban Air Mobility (UAM), i.e. on-demand urban passenger (and cargo) transportation services, represents a new technology and potentially an emerging industry. It is not simply an extension of commercial aviation as we know it—it is a different domain. A first priority for UAM is that it be safe and secure (Booz, Allen, Hamilton, 2018; Crown, Consulting, Inc., 2018). A workshop held in Arlington, Virginia, brought together experts from the on-demand world (including UAM) to assess and prioritize the challenges and barriers to be addressed in successfully introducing On Demand Mobility (ODM) vehicles and services (ODM and Emerging Technology Workshop, 2016). Of the nine challenges assessed, the highest priority was assigned to certification, followed by affordability, and then safety. Considering the confluence of certification and safety, it is clear that risk and its assessment were judged to be of high relevance to workshop participants.

UAM↗

NASA NTRS1996

Evaluation of Cryogenic Power Conditioning Subsystems for Electric Propulsion Spacecraft

The power requirement of vehciles desgined to transport cargo supporting a piloted expedition to Mars is in the range of megawatts. Therefore, it is imperative that the megawatt - class power processing unit designed for high-power nuclear electric propulsion vehicles using turboalternators and advanced magnetoplasmadynamic thrusters shouls be such that the overall system efficienty is as high as possible with minimum system specific mass.

cryogenic↗

NASA NTRS2021

Parametric Study of State-of-Charge for an Electric Aircraft in Urban Air Mobility

The envisioned concept of urban air mobility is anticipated to support passenger transportation, cargo delivery, and emergency services in major metropolitan areas with increasing autonomy levels in the future. Distributed electric propulsion powered electric vertical takeoff and landing aircraft are expected to enable urban air mobility. However, the low specific energy of onboard lithium-ion polymer batteries and wind conditions impose constraints on flight endurance. Therefore, to enable autonomous urban air mobility operations using electric aircraft, one of the critical steps from a safety and efficiency perspective is to understand how various operational and environmental conditions impact the state-of-charge of the onboard lithium-ion polymer batteries. This research performs a parametric study of the state-of-charge for a NASA-proposed conceptual multirotor aircraft flight in the urban environment. The parameters considered for the parametric analysis are cruise airspeed, cruise altitude, climb and descent profiles, wind conditions (wind magnitude, wind direction relative to the route, and wind magnitude uncertainty), and required time of arrival.

Urban Air Mobility↗

NASA NTRS2021

Parametric Study of State of Charge for an Electric Aircraft in Urban Air Mobility

The envisioned concept of urban air mobility is anticipated to support passenger transportation, cargo delivery, and emergency services in major metropolitan areas with increasing autonomy levels in the future. Distributed electric propulsion powered electric vertical takeoff and landing aircraft are expected to enable urban air mobility. However, the low specific energy of onboard lithium-ion polymer batteries and wind conditions impose constraints on flight endurance. Therefore, to enable autonomous urban air mobility operations using electric aircraft, one of the critical steps from a safety and efficiency perspective is to understand how various operational and environmental conditions impact the state-of-charge of the onboard lithium-ion polymer batteries. This research performs a parametric study of the state-of-charge for a NASA-proposed conceptual multirotor aircraft flight in the urban environment. The parameters considered for the parametric analysis are cruise airspeed, cruise altitude, climb and descent profiles, wind conditions (wind magnitude, wind direction relative to the route, and wind magnitude uncertainty), and required time of arrival.

Urban Air Mobility↗

NASA NTRSDate not supplied

AAM NC Tech Talk: Intro to Amazon Web Services

The purpose of this Tech Talk is to engage with the Advance Air Mobility National Campaign community on the use of a cloud provider to promote public confidence and accelerate the realization of emerging aviation markets for passenger and cargo transportation in urban, suburban, rural, and regional environments.

AWS↗

NASA NTRS2022

Applicability of Digital Flight to the Operations of Self-Piloted Unmanned Aircraft Systems in the National Airspace System

Unmanned Aircraft Systems (UAS) hold great promise for a new era of specialized missions, including personal air transportation, cargo flight operations, aerial surveys, inspections, firefighting and more. The anticipated market growth is significant. To unlock its scalability and incumbent benefits requires a human to oversee multiple flights simultaneously, focusing on multi-vehicle mission management and relinquishing to autonomous systems their active role in controlling the aircrafts’ flight paths. Key to the realization of these scalability benefits is minimally-encumbered access to the National Airspace System (NAS), which poses some unique challenges for self-piloted UAS aircraft operations. These include the requirement for compatibility with existing airspace structures and operations including Visual Flight Rules (VFR) and Instrument Flight Rules (IFR), neither of which were developed to accommodate the unique needs and capabilities of UAS. This paper explores the applicability of Digital Flight to the operations of self-piloted UAS. As proposed by NASA, Digital Flight is a flight operations capability, enabled by a set of cooperative procedures and digital technologies, in which flight operators ensure flight-path safety through automated separation and flight path management in lieu of visual procedures and Air Traffic Control separation services. Flights operating under potentially-forthcoming rules of Digital Flight employ advanced automation technologies, information sharing, connectivity to operational data, and cooperative behaviors through distributed decision-making to maintain safety and achieve mission objectives. Designed for integration with VFR and IFR operations in shared NAS airspace, potentially as a third set of flight rules, Digital Flight may provide the mechanism for UAS operators – and all aircraft operators – to scale and diversify their operations beyond what is achievable under current regulations.

DFR↗

NASA NTRSDate not supplied

Visualizing Corridors in Terminal Airspace using Trajectory Clustering

Context: Advances in battery and automation technology have made routine air taxi and cargo transport in urban areas a business model that can be attained by emerging aviation innovators. The community vision and work to enable these novel operations is discussed using the term ‘Urban Air Mobility’ or UAM. Small, piloted, airspace vehicles that fly with a few passengers do operate in urban areas today, and these vehicles can be studied as an early proxy for this future UAM traffic. Aim: We seek to identify corridors already in daily operation and their properties. Method: We applied DBSCAN and HDBSCAN to Dallas Forth-Worth TRACON flight data to identify corridors in use, their density, and devised a method to annotate landing sites used in these corridors with site metadata. Results: While DBSCAN was unable to group similar trajectories, we we were able to successfully identify corridors using HDBSCAN, measure their density and annotate them. Conclusion: The applied method can successfully identify corridors in daily operation with additional metadata to help domain expert understand the intent of UAM corridors.

UAM, Trajectory, TRACON, Clustering, DBSCAN, HDBSC↗

NASA NTRSDate not supplied

Visualizing Corridors in Terminal Airspace Using Trajectory Clustering

Context: Advances in battery and automation technology have made routine air taxi and cargo transport in urban areas a business model that can be attained by emerging aviation innovators. The community vision and work to enable these novel operations is discussed using the term ‘Urban Air Mobility’ or UAM. Small, piloted, airspace vehicles that fly with a few passengers do operate in urban areas today, and these vehicles can be studied as an early proxy for this future UAM traffic. Aim: We seek to identify corridors already in daily operation and their properties. Method: We applied DBSCAN and HDBSCAN to Dallas Forth-Worth TRACON flight data to identify corridors in use, their density, and devised a method to annotate landing sites used in these corridors with site metadata. Results: While DBSCAN was unable to group similar trajectories, we we were able to successfully identify corridors using HDBSCAN, measure their density and annotate them. Conclusion: The applied method can successfully identify corridors in daily operation with additional metadata to help domain expert understand the intent of UAM corridors.

UAM Trajectory, TRACON, Clustering, DBSCAN, HDBSCA↗

NASA NTRSDate not supplied

A Blockchain Case Study for Urban Air Mobility Operational Intent

The next generation of aerial passenger and cargo transportation may leverage the concept of Urban Air Mobility (UAM). UAM is a concept that proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical takeoff and landing (VTOL) or short takeoff and landing (STOL) aircraft to overcome increasing surface congestion [1]. The UAM concept leverages a decentralized service-based architecture for airspace solutions. Within the environment, UAM operators work collaboratively to manage aerial vehicles in the urban environment. Providers of Services for UAM (PSU), UAM operators, and Supplemental Data Service Providers (SDSP) provide services to support flight operations within the UAM environment. Also, various views of UAM flight information are provided to the public and public safety entities [2]. The Federal Aviation Administration (FAA) can coordinate flight information between the FAA controlled National Airspace System (NAS) and the UAM environments through the FAA-Industry Data Exchange Protocol (FIDXP). To realize the potential of UAM, an assurance of cybersecurity is critical for public acceptance. Cybersecurity has come to the forefront highlighting the need to protect these networks and systems from cyberattacks. The growth in the development of UAM systems, and the associated data exchange and service interactions will be at risk due to numerous types of cybersecurity attacks. As these threats evolve, the UAM cybersecurity capabilities must adapt to these changes as well [3]. This research focuses on the secure data exchange and storage of this decentralized UAM environment to address these challenges. This research intends to leverage a permissioned blockchain approach to address cybersecurity threats that may impact a UAM environment. Blockchain technologies can be used for tracking transactions and verifying negotiated agreements between stakeholders in the NAS environment. For example, the record of the submitted flight plan and the approved flight plan could be verified using the Blockchain-based immutable ledger.

UAM↗

NASA NTRSDate not supplied

Extensible Traffic Management (xTM) - High-altitude Operations and Beyond

The technology development of balloons, airships, and high-altitude long-endurance (HALE) high-aspect-ratio wing aerial vehicles has expedited the deployment of high-altitude operations above Flight Level (FL) 600. It allows broader communication service area coverage than at ground level and enables efficient and precise earth observation to help address global climate change. Meanwhile, a record number of orbital launches were conducted in 2021. New mission concepts including those for small satellites, satellite constellations, suborbital tourism and point to point cargo transport are being developed. To enable efficient and safe operations of new-entrant vehicles and to alleviate the potential burden on air traffic controllers, the concept of Unmanned aircraft systems Traffic Management (UTM) explored a different approach requiring cooperative operations among operators/pilots through operational intent sharing and coordination. This concept has been extended and proposed by the community to handle traffic management for high-altitude operations. While the concept and basic system were tested in UTM, there are many critical capabilities needed for high-altitude operations. This talk will introduce the challenges brought by high-altitude operations and space operations and on-going research activities in developing critical capabilities for extensible traffic management at NASA.

Extensible Traffic Management↗

NASA NTRSDate not supplied

NASA and Advanced Air Mobility (AAM) National Campaign (NC) Tech Talk: Integrated Data Product

NASA Advanced Air Mobility (AAM) National Campaign has hosted multiple flight tests in a effort to promote public confidence and accelerate the realization of emerging aviation markets for passenger and cargo transportation in urban, suburban, rural, and regional environments. The goals and objectives for each flight test are intended to assess the performance of the vehicle’s capacity to operate safely, efficiently, and sustainably in urban areas. The Airspace Test and Infrastructure (ATI) team processes the flight data to evaluate the effectiveness of air vehicle and airspace management integration, while its analysis capabilities support the assessment of the efficacy of proposed vehicles and ground systems required to enable the vehicles’ operations. The ATI data services team creates many products from the data, first by transforming and merging the data into a single Integrated Data Product (IDP). This aligns data from many sources by time, so that, for example, the winds that impacted a flight can be aligned with its ground track and speed. A detailed IDP enables many types of statistical computation and visualizations that help researchers understand what transpired during the flight and how it can be explained. This Tech Talk will give an overview of the IDP process, including examples of the resulting products created by the data services team. It will also share an application that will allow participants to perform their own data analysis.

National Campaign, Advanced Air Mobility, Integrat↗

NASA NTRSDate not supplied

Community Noise Impact of Urban Air Mobility Vehicle Operations

Advanced air mobility (AAM) missions, carried out by electrically driven air vehicles, are characterized by ranges of less than about 300-500 nm (about 500-900 km) and include both rural and urban operations. The missions may include public transportation, cargo delivery, air taxi, and emergency response. While the urban air mobility (UAM) subset of AAM is projected to have high economic benefit, it is also the most difficult to develop because it must overcome many barriers, including those associated with the airspace system, safety, and community noise. This presentation focuses on the utilization of UAM source noise data for assessment of community noise impact. Although a limited number of acoustic flight measurement campaigns have been made to characterize the source noise of prototype and preproduction UAM aircraft, prediction-based approaches are primarily considered herein. Following conceptual design, in which the vehicle is appropriately sized for its intended mission, a comprehensive analysis must be performed for a range of operating conditions spanning the flight envelope to determine the corresponding configurations of the vehicle, that is, the trimmed states. For each trimmed state, the noise produced by each source, for example, steady and unsteady rotor noise, may be computed and so-called source noise (hemi)spheres generated. These source data may subsequently be used in various community noise impact analyses. Several use cases are presented including those supporting noise certification and those for auralizations that may, in turn, be used as part of a perception-influenced design process. Land use planning tools for generating noise exposure maps, including those using simulation and integrated modeling approaches, are also presented. Finally, use cases supporting development of low noise flight operations, including an acoustic flight simulator and acoustically aware flight control, are considered.

aircraft community noise↗