Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

High performance noble-metal-free NiCo/AC bimetal for gasification in supercritical water

We report high performance Noble-metal-free NiCo/AC bimetal for gasification in supercritical water by the polyol reduction method with chloroplatinic acid as nucleation seed. At 475 _C and 20 min, the carbon efficiency (CE) for gasification of phenol with NiCo/AC has reached about 65%, which represents a more than 20-fold enhancement of carbon efficiency compared to the Co/AC and 6-fold compared to the Ni/AC. The CE of commercial noble Ru/C (5 wt%) catalyst is only about 15% higher than that of NiCo/AC catalyst. The catalyst was characterized by BET, XRD, XPS and TEM. The results indicate smaller and higher disperse of NiCo alloy has been achieved. By using NiCo/AC catalyst, the CE can reach about 90% at 525 _C and 60 min with a 5 wt% phenol, 0.098 kg/m3 density and catalyst loading of 0.5 g/g (the mass of NiCo/AC catalyst/the mass of phenol). The results of GCeMS indicate NiCo/AC can suppress tar successfully. A kinetic modeling was also proposed to describe gaseous product and tar formation, which gives the activation energy (Ea) 123.56 ± 31 kJ/mol and the frequency factor 16.93 ± 0.48 for gaseous products. While for tar formation, the Ea is 112.95 ± 24 kJ/mol and the frequency factor is 13.99 ± 0.37. The successful use of noble-metal-free NiCo/AC shows the potential to replace noble Ru-catalysts in SCWG process for gases fuels by bimetal.

phenol, gasification, supercritical water, NiCo/AC↗

Rigid Supramolecular Aramid Nanotubes as Catalyst Supports

Solution‐phase heterogeneous catalysts benefit from nanoscale dimensions, which maximize specific surface area and enhance catalytic activity. However, the ease of recovering such nanocatalysts depends on the design of the support materials, which are often particle‐like. Rigid 1D nanomaterials are proposed as supports that can enhance separability while offering high volumetric specific surface area for greater catalyst loading and activity. Here, aramid amphiphiles (AAs) are designed to spontaneously self‐assemble in water into high‐aspect‐ratio supramolecular nanotubes with tunable surface chemistry. These AA nanotubes exhibit high persistence lengths (P = 750 ± 340 µm) and mechanical stiffnesses (3 N/m). Incorporating surface thiol groups enables immobilization of catalytic gold nanoparticles. The resulting AA nanotube‐gold nanoparticle complexes exhibit high catalytic activity, efficient recoverability via simple microfiltration, and sustained reusability over ten reaction cycles. This study demonstrates the utility of molecular self‐assembled 1D nanomaterials as versatile scaffolds for the reuse and recovery of nanoscale catalysts.

1D nanomaterials↗

Valorization of waste polyolefins to butene, unsaturated fatty alcohols, and branched alkenes using CO 2 and plasma catalyst

Butene, branched alkenes, and short-chain unsaturated fatty alcohols are among the chemicals that have a wide range of industrial applications in the production of fuels, chemicals, and polymers. In this work, we produced these valuable commodity chemicals from waste plastics using a single-step plasma-catalytic process at atmospheric pressure CO 2 . The study shows that combining non-thermal plasma and zeolite could convert polyolefins at a temperature of 200 °C within 15 minutes, producing liquids rich in C 5 and C 6 branched alkenes and C 6 -C 8 unsaturated fatty alcohols. Additionally, gaseous products include a high yield of butene. Comparative studies indicate that combining CO 2 plasma with zeolite synergistically increases reaction rates and alters product compositions. Product selectivity was strongly dependent on reaction conditions, including plasma power, gas flow rates, reactor temperature, and catalyst loading. Furthermore, this process was applicable to common polyolefins and post-consumer polyethylene, indicating that the plasma catalytic approach has promising potential to valorize waste plastics and greenhouse gas CO 2 into versatile chemicals.

42 ENGINEERING↗

Electrospun Nanofiber Electrodes for High and Low Humidity PEMFC Operation

MEAs with nanofiber mat electrodes containing Pt/C catalyst and Nafion binder were fabricated and evaluated. The electrodes were prepared by electrospinning a solution of catalyst powder, salt-form Nafion (with Na + , Li + , or Cs + as the sulfonic acid counterion), and a carrier polymer of either polyethylene oxide or poly(acrylic acid). The carrier polymer was extracted prior to MEA testing by a hot water soaking step. The resulting fibers were 15%–17% porous, with a core–shell-like morphology (a coating of primarily Nafion on the fiber surface). MEAs with anode/cathode catalyst loadings of 0.1 mg Pt cm −2 each and a Nafion 211 membrane produced high power at both high and low relative humidity (RH) conditions in H 2 /air fuel cell tests, e.g., a maximum power density of 919 mW cm −2 at 100% RH and 832 mW cm −2 at 40% RH for a test at 80 °C and 200 kPa abs . The presence of nm-size pores within the fibers trapped water via capillary condensation during low RH feed gas testing, thus maintaining a high proton conductivity of the Nafion binder in the anode and cathode while minimizing/eliminating ionic isolation of catalyst particles in low water content, poorly conductive binder.

25 ENERGY STORAGE↗

Design and Validation of a High-Throughput Reductive Catalytic Fractionation Method

Reductive catalytic fractionation (RCF) is a promising method to extract and depolymerize lignin from biomass, and bench-scale studies have enabled considerable progress in the past decade. RCF experiments are typically conducted in pressurized batch reactors with volumes ranging between 50 and 1000 mL, limiting the throughput of these experiments to one to six reactions per day for an individual researcher. Here, we report a high-throughput RCF (HTP-RCF) method in which batch RCF reactions are conducted in 1 mL wells machined directly into Hastelloy reactor plates. The plate reactors can seal high pressures produced by organic solvents by vertically stacking multiple reactor plates, leading to a compact and modular system capable of performing 240 reactions per experiment. Using this setup, we screened solvent mixtures and catalyst loadings for hydrogen-free RCF using 50 mg poplar and 0.5 mL reaction solvent. The system of 1:1 isopropanol/methanol showed optimal monomer yields and selectivity to 4-propyl substituted monomers, and validation reactions using 75 mL batch reactors produced identical monomer yields. To accommodate the low material loadings, we then developed a workup procedure for parallel filtration, washing, and drying of samples and a 1H nuclear magnetic resonance spectroscopy method to measure the RCF oil yield without performing liquid-liquid extraction. As a demonstration of this experimental pipeline, 50 unique switchgrass samples were screened in RCF reactions in the HTP-RCF system, revealing a wide range of monomer yields (21-36%), S/G ratios (0.41-0.93), and oil yields (40-75%). These results were successfully validated by repeating RCF reactions in 75 mL batch reactors for a subset of samples. We anticipate that this approach can be used to rapidly screen substrates, catalysts, and reaction conditions in high-pressure batch reactions with higher throughput than standard batch reactors.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

Anion Exchange Membrane Water Electrolysis Using a Catalyst-Coated Membrane Cathode

A catalyst-coated membrane (CCM) approach to electrode fabrication for high pH water electrolysis offers enhanced interfacial contact between the catalyst layer and the membrane surface in comparison to the catalyst-coated substrate (CCS) electrode configuration. The CCM facilitates enhanced ionic and water transport between the cathode and the anion exchange membrane (AEM). This advantage is particularly significant with AEM water electrolysis (compared to proton exchange membrane water electrolysis) because the cathode typically operates under dry conditions and relies solely on diffusive water transport across the AEM from the liquid-fed anode. This study presents a direct performance comparison between CCS and CCM cathode configurations using identical hydrogen evolution reaction (HER) catalysts and other components. The use of a pseudo-reference electrode integrated into the membrane electrode assembly enabled detailed analysis of the CCM cathode polarization behavior. Surface characterization provided insight into the degradation mechanisms associated with the CCM configuration. Optimization of the cathode ionomer cross-link density improved both the cathode polarization performance and the electrolysis device durability. Further optimization of the HER catalyst loading in the CCM cathode resulted in additional gains in the electrolysis efficiency. Collectively, these findings offer valuable guidance for the design and fabrication of high-performance, durable AEM electrolysis CCMs.

Water electrolysis↗

Silica Supported Organometallic Ir I Complexes Enable Efficient Catalytic Methane Borylation

Catalytic C–H borylation is an attractive method for the conversion of the most abundant hydrocarbon, methane (CH 4 ), to a mild nucleophilic building block. However, existing CH 4 borylation catalysts often suffer from low turnover numbers and conversions, which is hypothesized to result from inactive metal hydride agglomerates. Herein we report that the heterogenization of a bisphosphine molecular precatalyst, [(dmpe)Ir(cod)CH 3 ], onto amorphous silica dramatically enhances its performance, yielding a catalyst that is 12-times more efficient than the current standard for CH 4 borylation. The catalyst affords over 2000 turnovers at 150 °C in 16 h with a selectivity of 91.5% for mono- vs diborylation. Higher catalyst loadings improve yield and selectivity for the monoborylated product (H 3 CBpin) with 82.8% yield and >99% selectivity being achieved with 1255 turnovers. X-ray absorption and dynamic nuclear polarization-enhanced solid-state NMR spectroscopic studies identify the supported precatalyst as an Ir I species, and indicate that upon completion of catalysis, multinuclear Ir polyhydrides are not formed. This is consistent with the hypothesis that immobilization of the organometallic Ir species on a surface prevents bimolecular decomposition pathways. Importantly, immobilization of the homogeneous Ir I fragment onto amorphous silica represents a unique and simple strategy to improve the TON and longevity of a CH 4 borylation catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Composite biopolymer electrolytes for high-performance reversible zinc-air batteries

Zinc-air batteries (ZABs) are regarded as one of the most promising candidates for next-generation energy storage systems due to their inherent safety, high energy density, and low cost. In this study, we optimized the composition of gel polymer electrolytes (GPEs), which play a crucial role in enhancing ZAB reversibility due to their water retention capabilities. The GPEs are synthesized using a combination of polyacrylic acid (PAA), polyacrylamide (PAM), and biopolymer kappa-carrageenan (KC), with and without additional additives. Among these, the composite GPE containing KC, PAA, and PAM demonstrated superior ionic conductivity (6.68 mS/cm at 30 °C) and enhanced water retention compared to the PAA–PAM-based GPE. Furthermore, this composite electrolyte operates within a wider electrochemical window of −1.0 V–2.2 V. A bifunctional catalyst, nickel–iron layered double hydroxide (NiFe-LDH), is electrochemically synthesized on a modified activated carbon cloth (CC). The catalyst loading is optimized based on oxygen evolution reaction (OER) performance, showing an overpotential of 555 mV. The oxygen reduction reaction (ORR) occurred at a half-wave potential of 0.620 V, which is lower than that of Pt/C (0.852 V), indicating better catalytic activity. The KC based cell exhibit better cycling stability than PAA–PAM-based GPE. The electrochemical performance of ZAB cells is evaluated under various atmospheres: ambient air and humid conditions and temperatures. Notably, in a humid environment, the cells achieved extended cycling stability, operating for over 500 h—significantly longer than under open-air conditions. Overall, this study highlights the importance of tailored GPE design and efficient bifunctional catalysts to enhance the performance and longevity of zinc-air batteries for long-duration energy storage applications.

Catalyst↗

Hydrogen production through the water-gas shift reaction: thermodynamic equilibrium versus experimental results over supported Ni catalysts

This paper discusses the experimental results of the water-gas shift reaction over supported nickel catalysts in comparison to thermodynamic equilibrium composition at the same reaction conditions. The effects of different supports on the performance of H{sub 2} production over nickel-supported catalysts are also evaluated at both low and high temperatures. Ceria-promoted nickel catalyst supported on powder alumina (Ni/CeO{sub 2}-Al{sub 2}O{sub 3}) demonstrated excellent performance. The catalyst was not stable at low temperature (250{sup o}C) but showed good stability at high temperature (450{sup o}C). At 450{sup o}C, with a catalyst loading of 0.05 g, CO/S (S = steam) ratio of 1:3, and gas hourly space velocity (GHSV) - 200 L h{sup -1} g{sub cat}{sup -1}, the activity of Ni/CeO{sub 2}-Al{sub 2}O{sub 3} was 95% with a H{sub 2} yield of 52% and a H{sub 2} selectivity of 73%.

01 COAL, LIGNITE, AND PEAT↗

Illuminating the mechanistic impacts of an Fe-quaterpyridine functionalized crystalline poly(triazine imide) semiconductor for photocatalytic CO 2 reduction

The strategy of incorporating earth-abundant catalytic centers into light-absorbing architectures is desirable from the viewpoint of low cost, low toxicity, and versatility for activating small molecules to produce solar-based fuels. Herein, we show that an Fe-quaterpyridine molecular catalyst can be anchored to a light-absorbing, crystalline, carbon nitride (PTI), to yield a molecular-catalyst/material hybrid, Fe-qpy-PTI, capable of facilitating CO 2 reduction to CO selectively (up to ∼97–98%) in aqueous solution under low-intensity light irradiation. This hybrid material leverages the ability of the Fe-qpy catalyst to bind CO 2 upon a one-electron reduction, as achieved by transfer of excited electrons from the carbon-nitride semiconductor. At a low incident power density of only 50 mW cm −2 , the catalytic activity of the hybrid material was measured across a range of catalyst loadings from 0.1–3.8 wt%, yielding CO rates of up to 596 μmol g −1 h −1 for a 3.8 wt% loading during a 3 h experiment. Over the course of 8 h, the hybrid material attained a CO evolution rate of 608 μmol g −1 h −1 and 305 turnovers for a TOF of ∼38 h −1 and an apparent quantum yield of 2.6%. Higher light intensities provided an initial increase in activity but negatively impacted photocatalytic rates with time, with an AQY of 0.6% at 150 mW cm −2 and 0.4% at 250 mW cm −2 . Transient absorption spectroscopy results showed electron survival probabilities consistent with the trends in observed product rates. Computational modeling was also used to evaluate and understand the mechanistic pathway of the high product selectivity for CO versus H 2 . These results thus help unveil key factors for leveraging the mechanistic understanding of molecular catalysts for CO 2 reduction for pairing with light absorbing semiconductors and establishing optimal conditions to attain maximal rates in aqueous solution.

McGuigan, Scott [Baylor University, Waco, TX (Unit↗

Completely Bio-based Polyol Production from Sunflower Stalk Saccharification Lignin Residue via Solvothermal Liquefaction Using Biobutanediol Solvent and Application to Biopolyurethane Synthesis

Sunflower stalk saccharification lignin residue was converted to a completely bio-based biopolyol via solvothermal liquefaction using acid catalyst. Different isomer-type biobutanediols were used to replace petroleum-derived reaction solvents. The reaction parameters were optimized according to measurement of the biomass conversion and the hydroxyl and acid numbers. The lignin-derived biopolyol with a biomass conversion of 80.1%, hydroxyl number of 819.0 mg KOH/g, and acid number of 26.5 mg KOH/g was produced in the optimal condition (reaction temperature of 120 °C, 4 wt% acid catalyst loading, reaction time of 120 min, and 25 wt% biomass loading). The lignin-derived biopolyol was neutralized to decrease the acid number. The neutralized biopolyol was used to synthesize biopolyurethane via polymerization with poly(propylene glycol), tolylene 2,4-diisocyanate terminated. Urethane bond formation was confirmed by FT-IR analysis. The biopolyurethane showed good thermal properties, such as a T{sub d5} of 273.4 °C, T{sub d10} of 305.8 °C, and a single degradation peak at 387.2 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic Degradation of the Nanocomposite Film Comprising Polyvinyl Chloride (PVC) and Sonochemically Synthesized Iron-Doped Zinc Oxide: A Comparative Study of Performances Between Sunlight and UV Radiation

Photocatalytic degradation of a composite film made of PVC and Fe-doped ZnO nanoparticles under both UV and sunlight have been accomplished and compared. The metal-doped semiconductor nanoparticles were previously synthesized using ultrasound. The nanoparticles had average crystal size of 33.67 nm and a bandgap of 2.69 eV. Catalysts loading were varied. Composite film with 0.033 g Fe-ZnO per g PVC was found to be the optimum with respect to degradation and mechanical properties. Degradation was monitored by loss in weight. Under sunlight 12% degradation could be achieved with the composite film in 210 min whereas under UV light the degradation was 10%. For pure PVC film, the corresponding degradations were 4.2 and 4.84% respectively. A plausible mechanism has been suggested and validated with experimental results which fitted the proposed model satisfactorily.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Water transport during startup and shutdown of polymer electrolyte fuel cell stacks.

A dynamic three-phase transport model is developed to analyze water uptake and transport in the membrane and catalyst layers of polymer electrolyte fuel cells during startup from subfreezing temperatures and subsequent shutdown. The initial membrane water content (?, the number of water molecules per sulfonic acid site) is found to be an important parameter that determines whether a successful unassisted self-start is possible. For a given initial subfreezing temperature at startup, there is a critical ? (?h), above which self-start is not possible because the product water completely engulfs the catalyst layers with ice before the stack can warm-up to 0 C. There is a second value of ? (?l), below which the stack can be self-started without forming ice. Between ?l and ?h, the stack can be self-started, but with intermediate formation of ice that melts as the stack warms up to 0 C. Both ?l and ?h are functions of the initial stack temperature, cell voltage at startup, membrane thickness, catalyst loading, and stack heat capacity. If the stack is purged during the previous shutdown by flowing air in the cathode passages, then depending on the initial amount of water in the membrane and gas diffusion layers and the initial stack temperature, it may not be possible to dry the membrane to the critical ? for a subsequent successful startup. There is an optimum ? for robust and rapid startup and shutdown. Startup and shutdown time and energy may be unacceptable if the ? is much less than the optimum. Conversely, a robust startup from subfreezing temperatures cannot be assured if the ? is much higher than this optimum.

30 DIRECT ENERGY CONVERSION↗

In-situ and ex-situ comparison of the electrochemical oxidation of SO 2 on carbon supported Pt and Au catalysts

Electrochemical characterizations are performed using thin films and commercial carbon supported platinum and gold catalysts for sulfur dioxide oxidation, the primary electrochemical oxidation reaction in the Hybrid-sulfur (HyS) thermochemical process. Electrochemical evaluation of metal thin films qualitatively confirms the higher activity of Au over Pt, AuPt, Pd, and Ir for the electrochemical oxidation of SO 2 . Ex-situ testing, using rotating disk electrode (RDE), shows an earlier onset potential for Au/C at low sulfuric acid concentrations (C ≤ 3.5 M) and a higher turnover frequency than Pt/C at sulfuric acid concentrations ranging from 3.5 M to 9 M. In-situ electrolysis experiments using low catalyst loadings (0.1 mg Au cm –2 , a factor of ≥5 lower than typical loadings) confirm that Au nanoparticles exhibit higher current densities and greater stability than Pt nanoparticles. This is consistent with the thin film screening studies, which showed higher activity with increasing gold content in AuPt thin films. Here, this work reveals an alternative material to state-of-the-art Pt to lower the energy needs and aid the HyS cycle in reaching the target of $2/kg H 2 set forth by the Department of Energy to achieve economic feasibility of large-scale hydrogen generation.

08 HYDROGEN↗

Preparation and visible-light photocatalytic properties of BiNbO₄ and BiTaO₄ by a citrate method

Visible-light photcatalysts of BiNbO₄ and BiTaO₄ powders have been successfully synthesized by a citrate method. The formation of pure triclinic phase of BiNbO₄ and BiTaO₄ at low temperature of 700 °C can be attributed to the advantage of the citrate method. The photocatalytic activity and possible mechanism were investigated deeply. For BiNbO₄ particles, the mechanism of methyl violet (MV) degradation under visible light irradiation involves photocatalytic and photosensitization pathways and the catalyst specific surface area has dominant influence. While for BiTaO₄ particles, the dominant mechanism arises from photosensitization pathways and a trade off between high specific surface area and good crystallinity is achieved. BiNbO₄ powder calcined at 700 °C shows the best photocatalytic efficiency among these catalysts, which is ascribed to its large surface area and more positive conduction band level. The optimal catalyst loading, additive H₂O₂ concentration and pH value is around 1 g/L, 2 mmol/L and 8 mmol/L, respectively. - Graphical abstract: Photodegradation performance and adsorption ability of BiNbO₄ and BiTaO₄ powders, respectively. BNO700 with the best photocatalytic efficiency is ascribed to its large surface area and more positive conduction band level. Highlights: • Pure BiNbO₄ and BiTaO₄ powders were prepared by a citrate method. • Excellent performance of visible-light degradation of MV was observed. • Different MV degradation mechanism for BiNbO₄ and BiTaO₄ powders was proposed. • BNO700 has large surface area and more positive conduction band level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen Generation From Electrolysis

Small-scale (100-500 kg H2/day) electrolysis is an important step in increasing the use of hydrogen as fuel. Until there is a large population of hydrogen fueled vehicles, the smaller production systems will be the most cost-effective. Performing conceptual designs and analyses in this size range enables identification of issues and/or opportunities for improvement in approach on the path to 1500 kg H2/day and larger systems. The objectives of this program are to establish the possible pathways to cost effective larger Proton Exchange Membrane (PEM) water electrolysis systems and to identify areas where future research and development efforts have the opportunity for the greatest impact in terms of capital cost reduction and efficiency improvements. System design and analysis was conducted to determine the overall electrolysis system component architecture and develop a life cycle cost estimate. A design trade study identified subsystem components and configurations based on the trade-offs between system efficiency, cost and lifetime. Laboratory testing of components was conducted to optimize performance and decrease cost, and this data was used as input to modeling of system performance and cost. PEM electrolysis has historically been burdened by high capital costs and lower efficiency than required for large-scale hydrogen production. This was known going into the program and solutions to these issues were the focus of the work. The program provided insights to significant cost reduction and efficiency improvement opportunities for PEM electrolysis. The work performed revealed many improvement ideas that when utilized together can make significant progress towards the technical and cost targets of the DOE program. The cell stack capital cost requires reduction to approximately 25% of today’s technology. The pathway to achieve this is through part count reduction, use of thinner membranes, and catalyst loading reduction. Large-scale power supplies are available today that perform in a range of efficiencies, >95%, that are suitable for the overall operational goals. The balance of plant scales well both operationally and in terms of cost becoming a smaller portion of the overall cost equation as the systems get larger. Capital cost reduction of the cell stack power supplies is achievable by modifying the system configuration to have the cell stacks in electrical series driving up the DC bus voltage, thereby allowing the use of large-scale DC power supply technologies. The single power supply approach reduces cost. Elements of the cell stack cost reduction and efficiency improvement work performed in the early stage of the program is being continued in subsequent DOE sponsored programs and through internal investment by Proton. The results of the trade study of the 100 kg H2/day system have established a conceptual platform for design and development of a next generation electrolyzer for Proton. The advancements started by this program have the possibility of being realized in systems for the developing fueling markets in 2010 period.

08 HYDROGEN↗

Toward Efficient Entropic Recycling by Mastering Ring–Chain Kinetics

Traditional chemical recycling approaches for condensation polymers suffer compounding energy losses and CO 2 emissions across multiple polymerization and depolymerization cycles. Entropic recycling can address these energy losses by entrapping free energy within the deconstruction products. Entropic recycling involves depolymerization to macrocyclic monomers, but such processes have not been feasible due to the high dilutions typically required to generate macrocyclic compounds. Here, we leverage selective catalysis to allow entropic recycling at concentrations 20–2000× higher than typical for macrocyclization reactions. We find that Ru-based olefin metathesis catalysts containing bulky iodine ligands significantly bias the ring–chain kinetic product distribution during ring-closing metathesis (RCM) toward the formation of oligomeric cycloalkenes. Further improvements in reaction concentration and macrocycle yield are obtained by using high catalyst loadings and by predisposing the alkene substrates to undergo favorable macrocyclization. These RCM optimizations translate effectively to cyclodepolymerization (CDP) of an olefin-containing polymer, with RCM and CDP affording similar macrocycle product distributions under identical reaction conditions. Macrocycle polymerization by entropy-driven ring-opening metathesis provides much higher molecular weight polymers than condensation polymerization of linear analogues, reducing the time to achieve high molecular weight from hours to minutes and enabling polymerization at room temperature. Finally, our findings re-emphasize the importance of energy consumption during a polymer’s lifecycle and provide a framework for the design of efficient entropic recycling systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗