Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalytic conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Catalytic disproportionation on carbon superstructures enables long-life, high-loading Li–S batteries

Electrocatalysis has been widely explored as an effective strategy to accelerate polysulfide (PS) conversion and suppress the shuttle effect in lithium–sulfur (Li–S) batteries. However, the underlying mechanisms remain elusive, and electrocatalytic reactions are inactive during cell resting. In this work, we reveal and quantitatively analyze a previously unrecognized sulfur reduction route (SRR) driven by catalytic disproportionation at the carbon cathode surface—fundamentally distinct from conventional electrocatalysis. Unlike conventional stepwise pathways, this SRR enables high-order polysulfides (Sₓ²⁻, x = 5–8) to directly convert into S₈ and Li₂S₂, bypassing low-order intermediates. This sulfur-reduction shortcut is systematically elucidated through high-performance liquid chromatography, revealing the intrinsic catalytic contribution of carbon frameworks and the dynamic evolution of PS species. We demonstrate that carbon superstructures (CSS-0.5), assembled from nanosheet subunits with abundant N/O functionalities and interconnected charge-migration channels, synergistically promote this catalytic process. Benefiting from these features, CSS-0.5 delivers superior electrochemical performance under practical conditions, enabling high sulfur loading (6.0 mg cm⁻²) pouch cells with 80.5% capacity retention over 210 cycles. This study provides the first quantitative evidence of electrocatalytic disproportionation in Li–S batteries, offering mechanistic insights and design principles for advanced sulfur cathodes.

25 ENERGY STORAGE↗
DOE OSTI2025

Ferromagnetic Atomic d ‐ p Orbital Hybridization for Promoting Al‐S Batteries

Rechargeable aluminum‐sulfur batteries (Al‐S) are emerging as a promising alternative energy storage system beyond lithium‐ion batteries due to their high energy density, abundant material resources, and economic efficiency. However, their practical application remains challenged by sluggish conversion kinetics, polysulfide shuttling, and low sulfur cathode utilization. While extensive studies have focused on enhancing polysulfide adsorption through catalytic strategies, the roles of electronic structure in dictating catalytic performance remain underexplored. Here, this work unveils the critical effect of unpaired electronic structure on the catalytic performance of single atom ferromagnetic transition metals through a systematic evaluation of three typical atomically dispersed ferromagnetic single atoms—Fe, Co, and Ni—supported on porous carbon (denoted as PC‐SAFAs). Comprehensive characterizations and density functional theory (DFT) calculations reveal that the PC‐SAFe catalysts, exhibiting the highest spin polarization arising from unpaired electrons, demonstrate the strongest interactions with polysulfide, thereby facilitating rapid and reversible polysulfide conversion reactions. Consequently, Al‐S batteries incorporating the optimized PC‐SAFe cathode achieve an impressive specific capacity of 508.8 mAh g −1 at 1.0 A g −1 after 500 cycles, along with much improved rate capability. In conclusion, this work provides a deeper understanding of the role of electronic structure in catalytic chemistry, and offers new insights for developing high‐performance Al‐S batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Biomass Demineralization: A Critical Need for Future Biorefineries

Biomass contains up to 14 essential elements that serve as nutrients for plant growth and development, including photosynthesis and enzyme functionalities. These elements in different chemical forms (e.g., minerals) constitute the inorganic fraction of biomass and can cause operational issues in thermal and biochemical biomass conversion technologies. In biomass gasification and pyrolysis processes, for instance, inorganics can cause fouling, tar formation, and corrosion. In catalytic and biochemical processes, inorganics can poison catalysts, alter biochemical pathways, and modify product yields and selectivity. This review provides an overview of the inorganic content in biomass feedstocks, the critical role inorganics play in plant biochemistry, the effect that inorganics have in various thermochemical and biochemical biomass conversion technologies, and different approaches to remove them from biomass. We provide recommendations for future research, focusing on developing technologies to effectively remove inorganics from biomass, using the inorganics to improve soil quality and for alternative applications, and designing biorefineries to convert demineralized biomass obtained from diverse sources.

09 - BIOMASS FUELS↗
DOE OSTI2024

Multi-catalytic active site biochar-based catalysts for glucose isomerized to fructose: Experiments and density functional theory study

In this study, this work provides an innovative method for preparing different isomerization catalysts by impregnating different proportions of MgCl 2 and AlCl 3 and combining different K compounds on cellulose-derived biochar, followed by pyrolysis. Results show MgO and Al(OH) 3 existing in 4 Mg- 1 Al-C catalyst can obtain better catalytic effect on glucose isomerization than the singe of Al presenting in 0 Mg- 1 Al-C catalyst. Moreover, the synergism effects of the multi-catalytic active sites such as β-, γ -Al(OH) 3 , KCl, MgO, and K 4 H 2 (CO 3 ) 3 in Mg-Al-KHCO 3 -C catalyst can further lead to an increase in glucose isomerization, compared to the 4 Mg- 1 Al-C catalyst. The X-ray diffraction results present that the value of O/Al in Mg-Al-KHCO 3 -C catalyst is as high as 13.38, which provides many unsaturated acidic catalysis sites and benefits the glucose isomerization. Simultaneously, the TPD results reveal that the main active sites (MgO, Al(OH) 3 , and K 4 H 2 (CO 3 ) 3 ) in Mg-Al-KHCO 3 -C catalyst can provide weakly acidic and basic sites and avoid strongly acidic and basic sites to excessively attack the glucose. Based on the DFT analysis, the results indicate that the MgO has a great effect on the ring-opening reaction to form acyclic glucose, while Al(OH) 3+ has a great effect on promoting acyclic glucose hydrogen transfer isomerized to form fructose. Compared to other carbon-based metal catalysts, the prepared Mg-Al-KHCO 3 -C has excellent catalytic performance, which gives a higher fructose yield (38.7%) and selectivity (87.72%) and glucose conversion (44.12%) at 100 °C in 30 min. In this study, we develop a highly efficient Mg-Al-K-biochar catalyst for glucose isomerization and provide an efficient method for cellulose valorization.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis, Processing, and Use of Isotopically Enriched Epitaxial Oxide Thin Films

Isotopic engineering has emerged as a key approach to study the nucleation, diffusion, phase transitions, and reactions of materials at an atomic level. It aims to uncover mass transport pathways, kinetics, and operational and failure mechanisms of functional materials and devices. Understanding these phenomena leads to deeper insights into important physical processes, such as the transport of ions in energy conversion and storage devices and the role of active sites and supports during heterogeneous catalytic reactions. Likewise, isotopic engineering is being pursued as a means of modifying functionality to enable future technological applications. In this Account, we summarize our recent work employing isotope labeling (e.g., 18 O 2 and 57 Fe) during thin film synthesis and postgrowth processing to reveal growth mechanisms, defect chemistry, and elemental diffusion under working and extreme conditions. Isotope-resolved analysis techniques with nanometer-scale spatial resolution, such as time-of-flight secondary ion mass spectrometry and atom probe tomography, facilitate the accurate quantification of isotopic placement and concentration in our well-defined heterostructures with precisely positioned, isotope-enriched layers. By measuring the nanometer-scale redistribution between natural abundance and isotopically enriched oxygen layers during the deposition of Fe 2 O 3 and Cr 2 O 3 by molecular beam epitaxy, we identified intermixing processes driven by surface adatoms occurring both at the film growth surface and within the first few layers below the surface. Further insights into synthesis mechanisms were gained by studying the tungsten oxide thin films grown by evaporating WO 3 powder in the presence of background 18 O 2 , revealing minimal incorporation of background oxygen during the film formation process. Thermal and radiation-enhanced diffusion in epitaxial Fe and Cr oxides were precisely tracked using 18 O and 57 Fe tracer layers incorporated into model epitaxial oxide thin films. This approach has allowed us to access thermal diffusion behavior at lower temperatures than previously measured, revealing a potential changeover in diffusion mechanism. Understanding radiation-enhanced diffusion in model oxides that represent the surface layers on the structural components of nuclear reactors informs our understanding of their corrosion behavior under irradiation. Isotopic labeling can also provide unique insights into the surface exchange reactions and defect chemistry of electrocatalysts. For instance, tracking the change in 18 O concentration at the surface of an epitaxial LaNiO 3 thin film after the electrocatalytic oxygen evolution reaction revealed the participation of lattice oxygen, confirming a hypothesis that had been proposed previously. Lastly, we highlight a new direction wherein we perform in situ processing studies utilizing isotopic tracers in conjunction with model epitaxial thin films within the atom probe tomography instrument. Additionally, this Account illustrates the great potential of isotopic engineering to enable fundamental mechanistic insights into physical processes and engineer functional properties in epitaxial films, heterostructures, and superlattices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hydride Accessibility and Reactivity in the Configurational and Stoichiometric Space of β-Ga 2 O 3 for CO 2 Hydrogenation

Understanding how surface species evolve under reaction conditions is essential for improving catalyst design for efficient CO 2 hydrogenation. This work combines systematic DFT calculations with grand canonical sampling to investigate the stability and reactivity of Ga–H species on β-Ga 2 O 3 across a range of reaction conditions. Initial DFT studies reveal that when Ga–H species are present, they facilitate formate formation via a low-barrier pathway, largely independent of the surface termination or hydrogen site. However, grand canonical sampling shows that under a broad range of reaction conditions─especially at high oxygen chemical potentials associated with high water content─Ga–H species are thermodynamically inaccessible. Furthermore, adsorbed water molecules can block reactive sites, inhibiting CO 2 activation even when hydrides are present. These findings suggest that the lack of accessible hydride species, rather than their intrinsic reactivity, could contribute to reduced catalytic performance of β-Ga 2 O 3 under more oxidizing, high-conversion conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cu site differentiation in tetracopper(I) sulfide clusters enables biomimetic N 2 O reduction

Copper clusters feature prominently in both metalloenzymes and synthetic nanoclusters that mediate catalytic redox transformations of gaseous small molecules. Such reactions are critical to biological energy conversion and are expected to be crucial parts of renewable energy economies. However, the precise roles of individual metal atoms within clusters are difficult to elucidate, particularly for cluster systems that are dynamic under operating conditions. Here, we present a metal site-specific analysis of synthetic Cu 4 (μ 4 -S) clusters that mimic the Cu Z active site of the nitrous oxide reductase enzyme. Leveraging the ability to obtain structural snapshots of both inactive and active forms of the synthetic model system, we analyzed both states using resonant X-ray diffraction anomalous fine structure (DAFS), a technique that enables X-ray absorption profiles of individual metal sites within a cluster to be extracted independently. Using DAFS, we found that a change in cluster geometry between the inactive and active states is correlated to Cu site differentiation that is presumably required for efficient activation of N 2 O gas. More precisely, we hypothesize that the Cu δ+ ∙∙∙Cu δ- pairs produced upon site differentiation are poised for N 2 O activation, as supported by computational modeling. These results provide an unprecedented level of detail on the roles of individual metal sites within the synthetic cluster system and how those roles interplay with cluster geometry to impact the reactivity function. We expect this fundamental knowledge to inform understanding of metal clusters in settings ranging from (bio)molecular to nanocluster to extended solid systems involved in energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Backbone editing and deconstruction of polyethylene by Beckmann rearrangement and hydrogenolysis

Polyethylene is the most widely produced commodity plastic and is used in many applications, including packaging, insulation, and medical devices. However, the inertness of polyethylene makes chemical recycling inefficient and challenging. We report the conversion of oxidized high-density and low-density polyethylene, formed by direct, catalytic oxidation, to polyamides by Beckmann rearrangement of the corresponding oximes. These polyamides have enhanced surface properties over those of unmodified polyethylene, while maintaining the same, favorable mechanical profiles. The amide sites were reductively cleaved by hydrogenolysis with ruthenium-based catalysts to furnish alcohol- and amine-terminated fragments, which were used for the synthesis of polyurea-urethanes with poly(tetrahydrofuran) and methylene diphenyl diisocyanate. These experiments show how to install cleavable moieties into the backbone of polyethylene to facilitate deconstruction and the generation of new materials to affect greater sustainability in polyolefins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Liquid organic hydrogen carriers for long-duration energy storage

Liquid organic hydrogen carrier (LOHC) systems are an excellent alternative to pressurized gas and liquid hydrogen storage technologies due to their high volumetric storage capacities and straightforward adaptation to existing infrastructure. Here, we investigate various molecular and heterogenized Ru, Mn, and Fe catalysts for the reversible (de)hydrogenation of polyols. Mn catalysts, Mn-MACHO(Ph) (1) and Mn-MACHO(iPr)BH 4 (2-BH 4 ) were found to maintain catalytic activity for hydrogen production comparable to the Ru analogs, with greater than 98% conversion of 1,4 butanediol and quantitative hydrogen production. Furthermore, to assess the viability of utilizing heterogenized molecular catalysts for 1,4 butanediol (de)hydrogenation, molecular catalysts, Mn-MACHO(Ph), Ru-MACHO(Ph), and Ru-9, were polymerized to form Mn-MACHO-Poly, Ru-MACHO-Poly, and Ru-9-Poly respectively. These catalysts were then used to assess (de)hydrogenation of polyols, ethylene glycol and 1,4 butanediol. These studies reveal that Ru-MACHO-Poly is an efficient dehydrogenation catalyst with 99% conversion and a hydrogen percent yield of 96%. In addition, Ru-MACHO-Poly is a competent hydrogenation catalyst with approximately 98% conversion back to 1,4 butanediol based on quantitative NMR measurements. Overall, the data suggest these molecular and heterogenized catalysts have potential for practical use in polyalcohol-based LOHC systems.

08 HYDROGEN↗
NASA NTRS1981

Gas-turbine critical research and advanced technology support project

A technology data base for utility gas turbine systems capable of burning coal derived fuels was developed. The following areas are investigated: combustion; materials; and system studies. A two stage test rig is designed to study the conversion of fuel bound nitrogen to NOx. The feasibility of using heavy fuels in catalytic combustors is evaluated. A statistically designed series of hot corrosion burner rig tests was conducted to measure the corrosion rates of typical gas turbine alloys with several fuel contaminants. Fuel additives and several advanced thermal barrier coatings are tested. Thermal barrier coatings used in conjunction with low critical alloys and those used in a combined cycle system in which the stack temperature was maintained above the acid corrosion temperature are also studied.

Clark, J. S.↗
DOE OSTI2024

Co(II) Substitution Enhances the Esterase Activity of a de Novo Designed Zn(II) Carbonic Anhydrase

Abstract Carbonic Anhydrases (CAs) have been a target forde novoprotein designers due to the simplicity of the active site and rapid rate of the reaction. The first reported mimic contained a Zn(II) bound to three histidine imidazole nitrogens and an exogenous water molecule, hence closely mimicking the native enzymes’ first coordination sphere. Co(II) has served as an alternative metal to interrogate CAs due to its d 7 electronic configuration for more detailed solution characterization. We present here the Co(II) substituted [Co(II)(H 2 O/OH − )] N (TRIL2WL23H) 3 n+ that behaves similarly to native Co(II) substituted human‐CAs. Like the Zn(II) analogue, the cobalt‐derivative at slightly basic pH is incapable of hydrolyzing p‐nitrophenylacetate (pNPA); however, as the pH is increased a significant activity develops, which at pH values above 10 eventually yields a catalytic efficiency that exceeds that of the [Zn(II)(OH − )] N (TRIL2WL23H) 3 + peptide complex. X‐ray absorption analysis is consistent with an octahedral species at pH 7.5 that converts to a 5‐coordinate species by pH 11. UV‐vis spectroscopy can monitor this transition, giving a pK a for the conversion of 10.3. We assign this conversion to the formation of a 5‐coordinate Co(II)(N imid ) 3 (OH)(H 2 O) species. The pH dependent kinetic analysis indicates the maximal rate (k cat ), and thus the catalytic efficiency (k cat /K m ), follow the same pH profile as the spectroscopic conversion to the pentacoordinate species. This correlation suggests that the chemically irreversible ester hydrolysis corresponds to the rate determining process.

Chemistry↗
DOE OSTI2025

Carboxylic acid induced restructuring of the Fe 3 O 4 (001) surface

The redox properties of Fe 3 O 4 surfaces are central to many catalytic processes and enable dynamic, reduction-induced morphological restructuring during reactions. Here, we investigate the structural changes of the Fe 3 O 4 (001) surface during the decomposition of formic and acetic acids using scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations. Both acids readily deprotonate, forming ordered carboxylate overlayers on the surface. Product formation pathways involve the removal of lattice oxygen, resulting in extensive surface restructuring. For formic acid, only a modest level of surface oxygen removal (∼3%) is observed, resulting in elongated pits along the octahedral Fe rows and exhibiting an aspect ratio of ∼3. In contrast, acetic acid induces more extensive reduction, with the removal of ∼20% of surface oxygen, yielding significantly larger pits while maintaining a similar aspect ratio. Repeated exposure to acetic acid further enlarges the pits, indicating preferential etching at step edges. DFT calculations reveal a mechanistic sequence in which lattice oxygen removal destabilizes adjacent Fe atoms, promoting their migration into the bulk and subsequent pit propagation and step edge formation. Together, these findings provide atomistic insights into the coupling between carboxylic acid conversion and oxide surface restructuring, underscoring the strong interplay between redox chemistry and morphological changes on catalytically active Fe 3 O 4 surfaces.

Ortiz-Garcia, José J. [Pacific Northwest National ↗
DOE OSTI2025

Dynamic behavior of molecular Pd-acetate trimers and dimers in heterogeneous vinyl acetate synthesis

Vinyl acetate monomer (VAM) is a crucial intermediate in the production of various polymers. While molecular Pd-acetate trimers and dimers, such as Pd 3 (OAc) 6 and K 2 Pd 2 (OAc) 6 , are known to form on potassium acetate (KOAc)-promoted PdAu catalysts during heterogeneous VAM synthesis, their mechanistic role remains unclear. Here, we study the dynamics of different Pd-acetate species by utilizing in situ and operando crystallographic and spectroscopic characterizations combined with computational modeling on monometallic Pd model catalysts. The promoter-free catalyst expectedly shows low catalytic activity and VAM selectivity, corresponding to the complete reduction of Pdn(OAc) 2n species to form Pd 0 and PdC x nanoparticles. Conversely, noticeable quantities of K n Pd 2 (OAc) n+4 species remain on the KOAc-promoted catalyst, leading to smaller nanoparticle formation with 10 times the activity and double the selectivity for VAM. This study reveals that molecular Pd-acetate trimers and dimers are significant indicators of catalytic performance and highlights their structurally dynamic nature in heterogeneous vinyl acetate chemistry.

Jacobs, Hunter P. [Rice Univ., Houston, TX (United↗
DOE OSTI2026

Expanding the horizon of bio-naphtha beyond gasoline blend: property characterization and conversion opportunity assessment through technoeconomic and life-cycle analyses

Bio-naphtha, a common by-product of biorefineries, is expected to experience substantial growth in supply due to increasing demands for renewable diesel and synthetic aviation fuel (SAF). However, demand for bio-naphtha itself as a gasoline blendstock is limited because of the electrification of light-duty vehicles. This work investigated valorization opportunities for bio-naphtha from catalytic fast pyrolysis, hydrothermal liquefaction, Fischer–Tropsch synthesis, and hydrotreated esters and fatty acids pathways. These opportunities include producing polymer-grade olefin via steam cracking, SAF via steam cracking followed by olefin oligomerization, and renewable aromatics benzene, toluene, and xylene (BTX) and hydrogen via catalytic reforming. Process models were developed in Aspen Plus V14 and Aspen HYSYS V14 to calculate the mass and energy balances for each conversion step. Technoeconomic assessment and life-cycle analysis were conducted to evaluate the minimum fuel/product selling price, conversion cost, and life-cycle CO2 equivalent (CO2e) emission reduction. Technoeconomic assessment results suggest a minimum fuel/product selling price as low as $1.9/kg of olefins, $6.30/gal of gasoline-equivalent SAF, and $1.2/kg of BTX without any incentives. For all pathways, these prices are dominated by bio-naphtha feedstock costs, which account for at least 76% of the total cost. Compared with petroleum baselines, bio-naphtha-derived SAF, olefins, and BTX can achieve significant CO2e emission reductions from the use of renewable carbon resources. The results of life-cycle analysis and subsequent technoeconomic assessment, incorporating carbon credits, indicate the economic viability of using bio-naphtha for polymer-grade olefin and BTX production, with product costs comparable to market prices.

Xu, Shuang↗
DOE OSTI2025

Integrated CO 2 capture and hydrogenation in presence of Ru–Na 2 ZrO 3 : An in-situ study

Integrated CO 2 capture and conversion (ICCC) by hydrogenation is a promising strategy to utilize carbon dioxide and this work add to the effort to elucidate the catalytic hydrogenation mechanism using Ru based dual functional materials (DFM). Ru-Na 2 ZrO 3 DFMs, obtained through different wet methods, were evaluated for the first time and the relationship between Ru and support systematically investigated. The thermally stable and cyclable Ru-Na 2 ZrO 3 -a (obtained without filtration step) exhibited CO 2 conversion of 80% and a higher yield of CO at 400°C compared to previously tested DFM, while the Na depleted/Zr rich Ru-Na 2 ZrO 3 -b resulted in 90% selectivity to CH 4 with yield of 1.11 mmol/g at the same temperature. The in-situ experiments have provided conclusive evidence showing that CO 2 hydrogenation on the two Ru DFMs is fundamentally different. In Ru-Na 2 ZrO 3 -a, the monoclinic Na 2 ZrO 3 support acted as the active centre (not as promoter) for CO 2 bridging binding and hydrogenation to CH 4 at the metal-support interface through associative formate pathway with limited further reduction to methane due to lack of H 2 spillover from the small and well dispersed Ru NPs, which results in CO desorption. Conversely, abundant clusters of larger Ru NPs in Ru-Na 2 ZrO 3 -b, led to CH 4 production due to co-existent Ru on-top direct dissociation of CO 2 (preferential) and monodentate formate adsorption and further methanation. Alkali zirconates doped metals, and their synthesis method could thus play a crucial role in designing tuneable heterogeneous catalysis in C 1 chemistry, which could significantly benefit the environment by lowering CO 2 levels, encouraging cleaner industrial practices, supporting a circular economy, and converting waste CO 2 into valuable products.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis of aviation biofuel precursors from biomass-derived ketones: Substrate adsorption configuration-catalytic activity

The production of aviation biofuel precursors from biomass-derived ketones by heterogeneous catalysis has been hindered by the low catalytic activity. Herein, a series of Cu-doped metal oxide catalysts were prepared for the conversion of biomass-derived ketones to aviation biofuel precursors. Solvent-free cyclopentanone conversion via aldol condensation reached 91.1 % over Cu/Al 2 O 3 with 100 % selectivity toward dimer and trimer oxygenated species, all of which are aviation biofuel precursors. This catalyst primarily contains Cu 2 O and Cu nanoparticles which are uniformly dispersed across the Al 2 O 3 surface. From in situ DRIFTS and DFT results, the incorporation of Cu species onto Al 2 O 3 not only increased the diversity of Lewis acidic sites, but also changed the adsorption of C = O groups, which lead to the increased aldol condensation activity of Cu/Al 2 O 3 . In conclusion, this study provides insight on the design of heterogeneous catalysts suitable for the solvent-free synthesis of aviation biofuel precursors from biomass-derived ketones.

Adsorption configuration↗
DOE OSTI2026

Electrocatalytic Hydrotreatment of Bio-Oil: Exploring Interactions Between Functional Groups

Electrocatalytic hydrotreatment (ECH) is being explored as a sustainable route for upgrading bio-oil to renewable fuels and chemicals. Bio-oil, produced by the fast pyrolysis of lignocellulosic biomass, is a complex mixture of compounds with various oxygen-containing functional groups, such as anhydrosugars, carboxylic acids, ketones, aldehydes, furans, phenols and alcohols. The ECH of several bio-oil model compound binary mixtures was conducted to investigate the interactions between these functional groups. Notably, phenolic compound reduction was significantly inhibited in the presence of aldehydes, particularly furfural. A strategy involving the reagent-based reduction of the aldehyde to an alcohol prior to ECH was shown to partially mitigate this inhibitory effect. Additionally, qualitative studies on the ECH of catalytic fast pyrolysis (CFP) oil with low aldehyde content showed promising results. These studies achieved the conversion of cyclopentenones and phenolic compounds present in the CFP oil to cyclopentanols and cyclohexanols, respectively.

09 BIOMASS FUELS↗
DOE OSTI2026

Evolution of size-selected Pt cluster catalysts on prototypical oxide supports

The current quest for new pathways into sustainable, efficient and durable energy conversion technologies makes the used for a fundamental understanding of the atomic-scale phenomena underlying catalytic processes ever more pressing. In this context, characterizing catalyst particles in situ provides valuable information about the evolution of their composition, structure, oxidation state and charge state during an ongoing process. To disentangle the influence of individual parameters – temperature, pressure, gas composition, cluster size, as well as support acidity, redox state and defect density – it is crucial to control them precisely and separately in experiments. At the example of size-selected Pt n clusters – i.e. sub-nm particles defined to the exact number of atoms – on flat oxide supports, we follow their rich evolution phenomena via (synchrotron-based) X-ray photoelectron spectroscopy (XPS) and scanning tunnelling microscopy (STM) during temperature ramps and in various gas environments. Here, we present our experience with these highly defined, yet complicated-to-create samples in ultra-high vacuum (UHV) and at mbar pressures. We discuss their stability during transport to synchrotrons and under reaction conditions on three prototypical oxide supports and show the various phenomena that can be disentangled. Ptn clusters on the non-reducible silicon dioxide, SiO 2 , remain size-selected and show remarkable stability. Doping strongly influences the size-dependent binding energy shifts and changes the Pt response to oxidative and reaction conditions, which we attribute to different cluster geometries: p-type doping leads to wetting, enhanced sinter resistance and a diminished response to oxidative environments, compared to clusters on n-type doped samples. We compare the system with our previous findings of a similar change in dimensionality for Pt 20 clusters on the reducible ceria, CeO 2 (111), support, induced by modulation of its O vacancy density. The Pt n /CeO 2 system is particularly interesting for strategies to stabilize and redisperse Pt clusters dynamically. Finally, we study the evolution of Pt n clusters on another reducible oxide support, magnetite, Fe 3 O 4 (001), in 0.1 mbar alternating redox conditions at RT and elevated temperature. In analogy to findings previously reported for Pt/TiO 2 (110), the clusters either become encapsulated by a thin oxide film via strong metal–support interaction (SMSI) or deeply buried in the magnetite. Overall, our approach of following the evolution of size-selected clusters on oxide supports leads to fundamental atomic-scale insights on nano-scale catalyst materials, on our path to sustainable, dynamic and self-repairing catalysts.

Falling, Lorenz J. [Technical Univ. of Munich (Ger↗