Search NASA⌕ Search

SEARCH · Search NASA

Results for “chemical segregation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Stabilization of high-performance rock-salt LiMnSbTe3 thermoelectrics with embedded van der Waals-like gaps

Rock-salt-structured compounds like lead chalcogenides are promising thermoelectrics, as their high symmetry, strong anharmonicity, and favorable phase behavior collectively lead to high performance by enabling large power factors and ultralow thermal conductivity. Here, we report LiMnSbTe 3 , a new rock-salt semiconductor stabilized through targeted chemical design by combining hexagonal MnTe with cubic LiSbTe 2 . Embedded in the highsymmetry matrix, van der Waals-like gaps form due to Sb 2 Te 3 nanoscale segregation, which acts as effective phonon-scattering centers, leading to a low lattice thermal conductivity of 0.37Wm- 1 K -1 at 873 K with alloy scattering from disordered cations. The ordered local structure of Sb2Te 3 -type vdW-like gaps and the cross-gap interaction facilitate the carrier transport. Aided by energyconverged valence bands and a paramagnon drag effect, high Seebeck coefficients and enhanced power factor can be achieved, leading to a high ZT of 1.2 at 873 K. Furthermore, introducing Mn deficiency increases ZT to 1.5, highlighting the potential for higher performance through optimized doping or alloying. A segmented single-leg thermoelectric module achieves an output power density of 0.52 Wcm -2 and an efficiency of 8.7% under ΔT of 478 K, further demonstrating its promising thermoelectric applications.

42 ENGINEERING↗

Understanding the effects of fabrication process on BaZr 0.9 Y 0.1 O 3– δ grain-boundary chemistry using atom probe tomography

Proton-conducting oxides, such as BaZr 0.9 Y 0.1 O 3–δ (BZY10), are receiving significant scientific attention for application in a variety of electrochemical applications. It has been shown that the synthesis route has a significant effect on the ionic behavior of these materials, especially the grain boundaries (GB). In this study, laser-pulsed atom probe tomography (APT) is used to characterize the GB chemistry of BZY10 samples prepared by four different methods: (1) spark plasma sintering (SPS), (2) conventional sintering followed by high-temperature annealing (HT), (3) conventional sintering with NiO used as a sintering aid (SSR-Ni), and (4) solid-state reactive sintering of oxide precursor powders with NiO as a reactive sintering aid (SSRS-Ni). Oxygen depletion (corresponding to oxygen vacancy accumulation) was observed at every GB in this study, consistent with the positive space-charge GB region commonly assigned to these materials. In contrast to the consistent trends associated with oxygen depletion, cation constituents showed varying segregation/depletion behaviors. The samples that used NiO revealed Ni preferentially segregating to the GB. The most common impurities in BZY10 are Al, Fe, Mg, Si, and Sr, all of which generally accumulate at GBs. In order to quantify these chemical trends, the APT method was optimized for this material supplemented with understanding from density functional theory (DFT). Finally, this APT study reveals the complexity of BZY10 GB chemistry and shows that even adjacent GBs in the same material can sometimes show surprisingly different GB chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of Surface and Bulk Behavior in Ni-Pd Alloys

The most salient features of the surface structure and bulk behavior of Ni-Pd alloys have been studied using the BFS method for alloys. Large-scale atomistic simulations were performed to investigate surface segregation profiles as a function of temperature, crystal face, and composition. Pd enrichment of the first layer was observed in (111) and (100) surfaces, and enrichment of the top two layers occurred for (110) surfaces. In all cases, the segregation profile shows alternate planes enriched and depleted in Pd. In addition, the phase structure of bulk Ni-Pd alloys as a function of temperature and composition was studied. A weak ordering tendency was observed at low temperatures, which helps explain the compositional oscillations in the segregation profiles. Finally, based on atom-by-atom static energy calculations, a comprehensive explanation for the observed surface and bulk features will be presented in terms of competing chemical and strain energy effects.

Bozzolo, Guillermo↗

Investigation of Chemical Species in the Corrosion Barrier Layer on Thermal CO 2 Treated AZ91D Magnesium Alloy with Lithium Nitrate

A unique corrosion barrier layer, formed by thermal CO 2 treatment with LiNO 3 on AZ91D, was characterized to reveal the chemical species and their spatial distribution using the combination of scanning transmission electron microscopy (STEM), energy dispersive spectroscopy (EDS), and electron energy loss spectroscopy (EELS) techniques. Two distinct and spatially segregated phases were identified as Li compound(s) with MgCO 3 and MgO in the surface barrier layer. Finally, based on the characterization results, it is presumed that the reaction of Mg oxide/hydroxide with LiNO 3 and CO 2 occurred preferentially in some local areas where Li compound(s) with MgCO 3 were present, but the unreacted areas contained MgO in the surface barrier layer.

36 MATERIALS SCIENCE↗

Nanoscale clustering and fission product segregation in irradiated annular U-10Zr fuel

Zirconium (Zr) is added to uranium (U) to improve the performance of metallic fuel for fast reactor applications. This study employs transmission electron microscopy (TEM) and atom probe tomography (APT) to investigate nanoscale clustering of U and Zr, as well as segregation of fission products (FPs), in annular U-10Zr (in weight) metallic fuel irradiated at the Advanced Test Reactor (ATR). The results reveal variations in the shape, size, and chemical composition of clusters at different radial locations within the irradiated fuel cross-section. Zr-rich clusters exhibit higher concentration of FPs compared to U-rich clusters, potentially due to the co-precipitation of Zr and FPs in the fuel matrix during cooling at the end-of-life. In conclusion, this work complements the study of fuel constituents and fission product distribution across multiple length scales in irradiated U-10Zr metallic fuel.

Atom probe tomography↗

Data-driven electron-diffraction approach reveals local short-range ordering in CrCoNi with ordering effects

Abstract The exceptional mechanical strength of medium/high-entropy alloys has been attributed to hardening in random solid solutions. Here, we evidence non-random chemical mixing in a CrCoNi alloy, resulting from short-range ordering. A data-mining approach of electron nanodiffraction enabled the study, which is assisted by neutron scattering, atom probe tomography, and diffraction simulation using first-principles theory models. Two samples, one homogenized and one heat-treated, are observed. In both samples, results reveal two types of short-range-order inside nanoclusters that minimize the Cr–Cr nearest neighbors (L1 2 ) or segregate Cr on alternating close-packed planes (L1 1 ). The L1 1 is predominant in the homogenized sample, while the L1 2 formation is promoted by heat-treatment, with the latter being accompanied by a dramatic change in dislocation-slip behavior. These findings uncover short-range order and the resulted chemical heterogeneities behind the mechanical strength in CrCoNi, providing general opportunities for atomistic-structure study in concentrated alloys for the design of strong and ductile materials.

36 MATERIALS SCIENCE↗

Hierarchical domain structures associated with oxygen octahedra tilting patterns in lead-free (Bi 1/2 Na 1/2 )TiO 3

Hierarchical domain structures associated with oxygen octahedra tilting patterns were observed in lead-free (Bi 1/2 Na 1/2 )TiO 3 ceramics using aberration-corrected high-resolution transmission electron microscopy (HRTEM). Three types of domains are induced by distinct mechanisms: the 'orientation-domain' is induced at micrometer scale formed by different tilting orientations of the oxygen octahedra, the 'meso-chemical-domain' occurs at a few tens of nanometer scale by chemical composition variation on the A-site in the ABO 3 perovskite structure, and the 'nano-cluster-region' runs across several unit-cells with apparent A-site cation segregation with oxygen vacancies clustering around Na cations. Based on HRTEM amplitude contrast imaging (ACI), the correlation between the oxygen octahedral tilting pattern and compositional non-stoichiometry was established. The role of the hierarchical domain structure associated with the tilting patterns of the oxygen octahedra on the ferroelectric behavior of (Bi 1/2 Na 1/2 )TiO 3 is also discussed.

36 MATERIALS SCIENCE↗

Transmutation doping of silicon solar cells

Normal isotopic silicon contains 3.05% of Si-30 which transmutes to P-31 after thermal neutron absorption, with a half-life of 2.6 hours. This reaction is used to introduce extremely uniform concentrations of phosphorus into silicon, thus eliminating the areal and spatial inhomogeneities characteristic of chemical doping. Annealing of the lattice damage in the irradiated silicon does not alter the uniformity of dopant distribution. Transmutation doping also makes it possible to introduce phosphorus into polycrystalline silicon without segregation of the dopant at the grain boundaries. The use of neutron transmutation doped (NTD) silicon in solar cell research and development is discussed.

Wood, R. F.↗

Ar-Ar and I-Xe Ages of Caddo County and Thermal History of IAB Iron Meteorites

Inclusions in IAB iron meteorites include non-chondritic silicate and those with more primitive chondritic silicate composition. Coarse-grained gabbroic material rich in plagioclase and diopside occurs in the Caddo County IAB iron meteorite and represents a new type of chemically differentiated, extra-terrestrial, andesitic silicate. Other parts of Caddo contain mostly andesitic material. Caddo thus exhibits petrologic characteristics of parent body metamorphism of a chondrite-like parent and inhomogeneous segregation of melts. Proposed IAB formation models include parent body partial melting and fractional crystallization or incomplete differentiation due to internal heat sources, and impact/induced melting and mixing. Benedix et al. prefer a hybrid model whereby the IAB parent body largely melted, then underwent collisional breakup, partial mixing of phases, and reassembly. Most reported 129I- Xe-129 ages of IABs are greater than 4.56 Gyr and a few are greater than or = 4.567 Gyr. These oldest ages exceed the 4.567 Gyr Pb-Pb age of Ca, Al-rich inclusions in primitive meteorites,

Bogard, Donald D.↗

Coupling of radiation and grain boundary corrosion in SiC

Abstract Radiation and corrosion can be coupled to each other in non-trivial ways and such coupling is of critical importance for the performance of materials in extreme environments. However, it has been rarely studied in ceramics and therefore it is not well understood to what extent these two phenomena are coupled and by what mechanisms. Here, we discover that radiation-induced chemical changes at grain boundaries of ceramics can have a significant (and positive) impact on the corrosion resistance of these materials. Specifically, we demonstrate using a combination of experimental and simulation studies that segregation of C to grain boundaries of silicon carbide leads to improved corrosion resistance. Our results imply that tunning of stoichiometry at grain boundaries either through the sample preparation process or via radiation-induced segregation can provide an effective method for suppressing surface corrosion.

Materials Science↗

Development of CuFeMnAlO 4+δ oxygen carrier with high attrition resistance and 50-kWth methane/air chemical looping combustion tests

A Copper-Ferri-Manganese-Aluminate spinel (CuFeMnAlO 4+δ ) oxygen carrier, developed at the US Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), shows promising results for chemical looping combustion with methane. Attrition resistance of the spinel oxygen carrier (160–600 µm) produced by a wet agglomeration method was significantly higher than that observed previously with a Copper-Ferri-Aluminate (CuFeAlO 4 ) oxygen carrier. Improved attrition resistance of the novel carrier can be attributed to minimal alumina phase segregation and minimal carbon formation. Heats of reaction measured by differential scanning calorimetry indicated exothermicity during reduction with methane. The total oxygen transfer capacity of the material was about 10.5 wt% at 850 °C. The attrition resistance and the oxygen transfer capacity of the carrier prepared at a commercial manufacturing facility (180 kg) were very similar to observed values during the development phase with the lab scale preparations. The material displays satisfactory methane conversion and significantly high particle durability during a 54 h test campaign conducted in NETL’s 50-kWth chemical looping dual fluid bed reactor unit at temperatures ranging from 700 to 900 °C. Low oxygen carrier make-up cost, due to the use of natural ore and pigment grade raw materials during synthesis and very low attrition rates, exceeded the performance goals determined by systems studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Valence State Modification of Cobalt in CoPt Nanocatalysts in Redox Conditions

Platinum is the primary catalyst for many chemical reactions in the field of heterogeneous catalysis. However, platinum is both expensive and rare. Therefore, it is advantageous to combine Pt with another metal to reduce cost while also enhancing stability. To that end, Pt is often combined with Co to form Co-Pt nanocrystals. However, dynamical restructuring effects that occur during reaction in Co-Pt ensembles can impact catalytic properties. In this study, model Co 2 Pt 3 nanoparticles supported on carbon were characterized during a redox cycle with two in situ approaches, namely X-ray absorption spectroscopy (XAS) and scanning transmission electron microscopy (STEM) using a multimodal microreactor. The sample was exposed to temperatures up to 500 °C under H 2 , and then to O 2 at 300 °C. Irreversible segregation of Co in the Co-Pt particles was seen during redox cycling and substantial changes of the oxidation state of Co were observed. After the H 2 treatment, a fraction of Co could not be fully reduced and incorporated into a mixed Co-Pt phase. Re-oxidation of the sample increased Co segregation, and the segregated material had a different valence state than in the fresh, oxidized sample. Furthermore, this in situ study describes dynamical restructuring effects in CoPt nano-catalysts at the atomic scale that are crucial to understand to improve the design of catalysts used in major chemical processes.

36 MATERIALS SCIENCE↗

Oxygen Distribution and Segregation at Grain Boundaries in Nb and Ta-Encapsulated Nb Thin Films for Superconducting Qubits

We report on atomic-scale analyses of oxygen distribution and segregation at grain boundaries (GBs) of Nb and Ta-encapsulated Nb (Ta/Nb) thin films for superconducting qubits using atom probe tomography (APT) and transmission electron microscopy (TEM). We observe oxygen segregation at grain boundaries (GBs) relative to the oxygen concentration within the grains for both Nb and Ta-capped Nb thin films and find that a higher oxygen concentration in the interior of Nb grains leads to greater oxygen segregation levels at GBs. This finding reveals that the formation of a local equilibrium of oxygen concentration between GBs and grain interiors of Nb is the primary driving force of the oxygen segregation behaviors in Nb and Ta-capped Nb. The enrichment factors (CGB/Cgrain) for oxygen segregation at GBs in Nb and Ta-capped Nb range from 2.4 ± 0.3 to 2.7 ± 0.4. The current results also highlight that controlling oxygen impurities in Nb during film deposition and fabrication processing is important to concomitantly reducing the level of oxygen segregation at GBs in Nb. Finally, we find that increases in the oxygen concentration in both Nb grains and GBs correlate with a suppression in the critical temperature for superconductivity (Tc). Together, our comparative chemical and charge transport property analyses provide atomic-scale insights into a potential mechanism, contributing to the decoherence in superconducting qubits.

Lee, Jaeyel [Fermilab] (ORCID:0000000185429612)↗

Hole-transport layer-dependent degradation mechanisms in perovskite solar modules

It is imperative to understand how the design of perovskite solar modules (PSMs) affects their degradation mechanisms and byproducts under environmental stressors to enable their long-term reliability. This work reports on the impact of the hole-transport layer (HTL) on thermal cyclability and degradation mechanisms of p–i–n PSMs by comparing 3 HTLs: NiO x , MeO-2PACz (a self-assembled monolayer), and a bilayer HTL of MeO-2PACz on NiO x . We observe surprising thermal cyclability from a performance standpoint despite generating clear degradation products. We find that without a fully dense HTL, seemingly insignificant moisture/oxygen ingress through the edge of the PSMs can lead to rapid destabilization of the metal halide perovskite (MHP) layer due to reactions between MHP degradation byproducts and the indium-tin oxide layer. We also show that illumination-induced cation phase segregation is dependent on the illumination of an inactive area (regions of the substrate uncovered by the rear electrode). As such, we find that a dense interface between the MHP and ITO is necessary for chemically robust PSMs and highlight criteria for testing field-relevant configurations in lab-scale architectures.

14 SOLAR ENERGY↗

Effects of Remelting Current on Structure, Composition, Microsegregation, and Inclusions in Inconel 718 Electroslag Remelting Ingots

The macro- and microstructures, chemical compositions, microsegregations, and nonmetallic inclusion characteristics at different positions of the as-cast IN718 ingots produced by a laboratory-scale electroslag remelting (ESR) furnace under four remelting currents (150, 200, 250, and 300 A) were compared and investigated comprehensively. The results indicate that the average melting rate increases with the increasing remelting current, and the molten pool tends to be deeper. Thus, at the same position of the ESR ingots, the volume fraction of the segregated phase, the degree of elemental segregation, and the secondary dendrite arm spacing have the same tendency to increase with the increasing remelting current and show an increasing trend from the bottom to the top along the height of each ingot. If the current is set relatively low, the oxygen and nitrogen levels in the ingots increase, the conditions that make the contents and distributions of Al and Ti become unstable. In addition, the major nonmetallic inclusions in the IN718 ESR ingots are MgO·Al{sub 2}O{sub 3} complex oxide inclusions with a three-layer structure and (Nb,Ti)N nitrides. The volume fractions and mean equivalent diameters display a downward trend with the increasing remelting current. The size and quantity of these inclusions are always larger in the upper portions of the ingots than those in the lower portions.

36 MATERIALS SCIENCE↗

Substrate Partitioning into Protein Macromolecular Frameworks for Enhanced Catalytic Turnover

Spatial partitioning of chemical processes is an important attribute of many biological systems, the effect of which is reflected in the high efficiency of enzymes found within otherwise chaotic cellular environments. Barriers, often provided through the formation of compartments or phase segregation, gate the access of macromolecules and small molecules within the cell and provide an added level of metabolic control. Taking inspiration from nature, we have designed virus-like particles (VLPs) as nanoreactor compartments that sequester enzyme catalysts and have used these as building blocks to construct 3D protein macromolecular framework (PMF) materials, which are structurally characterized using small-angle X-ray scattering (SAXS). Additionally, the highly charged PMFs form a separate phase in suspension, and by tuning the ionic strength, we show positively charged molecules preferentially partition into the PMF, while negatively charged molecules are excluded. This molecular partitioning was exploited to tune the catalytic activity of enzymes enclosed within the individual particles in the PMF, the results of which showed that positively charged substrates had turnover rates that were 8500× faster than their negatively charged counterparts. Moreover, the catalytic PMF led to cooperative behavior resulting in charge dependent trends opposite to those observed with individual P22 nanoreactor particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unusual Li 2 O sublimation promotes single-crystal growth and sintering

Li 2 O is rarely used for cathode material synthesis due to its high melting point (1,438 °C). Here we discover that Li 2 O can sublimate at 800-1,000 °C under ambient pressure, opening new possibilities for cathode synthesis. We propose a mechanism that enables synthesis of single crystals-such as LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) or LiNi 0.9 Mn 0.05 Co 0.05 O 2 (NMC90)-without direct contact with Li 2 O salts. We show that Li 2 O vapour successfully converts spent polycrystalline NMC811 into segregated single crystals without milling or post-treatment. The Li 2 O vapour, derived from Li 2 O solids, diffuses rapidly and reacts with precursors, mimicking a molten-salt environment, which facilitates single-crystal growth. The chemical lithiation process continuously drives Li 2 O sublimation, sintering the crystals. Single crystals derived from Li 2 O and fresh precursors or spent polycrystals exhibit outstanding cycling after 1,000 cycles in full cells. The demonstrated Li 2 O sublimation and its universal role in promoting single-crystal growth provides an effective approach for single-crystal synthesis, scale-up and recycling.

25 ENERGY STORAGE↗

Laser-heated Pedestal Growth and Raman DTS for Harsh-environment Applications

Fibers composed of single crystal (SC) materials are mechanically, thermally, and chemically robust to harsh conditions, and thus attractive for sensing applications in harsh environments. However, SC fibers grown via the laser-heated pedestal growth (LHPG) technique do not intrinsically have a functional cladding layer. We investigate self-segregation of dopants in a crystal matrix within a SC fiber. Ti and Cr dopants within a sapphire matrix were grown via the LHPG method. Cross-sectional dopant concentrations were measured via electron-probe micro-analysis (EPMA). The cross-sectional constituent profiles and resulting transmissivities were characterized as a function of growth parameters.

Lander, Gary↗