Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud radar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

NASA Spaceborne Radar Missions: CloudSat and QuickScat: To Observe Clouds and Sea Surface Winds

CloudSat is a joint US/Canadian spaceborne science mission for global measurements of atmospheric cloud structures. Cloud Profiling Radar (CPR) has already captured many stunning profiles of cloud/precipitation structures, some have not been seen before. Observation of storms' cloud formation, in conjunction with data from other remote sensors, will hopefully improve quality of natural hazards' forecasts.

CloudSat↗
NASA NTRS1994

System Design for a Spaceborne Cloud Rada

This paper presents some crucial design parameters and a strawman system design for a nadir-looking, 94-GHz spaceborne cloud profiling radar. This sensor is expected to provide cloud measurements at vertical resolution of 500 m and with a minimum detectable cloud reflectivity of slightly better than -30 dBZ. The radar design is intended to be accommodated by a spacecraft with limited resources. It uses a 2-m antenna and an extended interaction amplifier (EIA) that are readily available in either ground-based and airborne applications. For space application, improvements in the EIA lifetime and space qualification will be required. For various reasons, the spaceborne cloud radar system development is expected to be greatly benefited by the implementation of an aircraft cloud radar instrument.

Cloud Measurement Spaceborne Cloud↗
NASA NTRS2019

An 82° Inclination Debris Cloud Revealed by Radar

The statistical debris measurement campaigns conducted by the Haystack Ultrawideband Satellite Imaging Radar on behalf of the NASA Orbital Debris Program Office are used to characterize the long-term behavior of the small, low Earth orbit (LEO) orbital debris environment. Recent analyses have revealed the presence of a persistent LEO small debris cloud, which has no accompanying large component, cataloged by the U.S. Space Surveillance Network. This cloud, at an inclination of approximately 82° and below 1200 km in altitude does, however, correspond to the heavily trafficked region of space that has suffered several known, accidental collisions, e.g., Cosmos 1934 and Cosmos 2251. In this paper, we describe the observed cloud and model it using the NASA Standard Satellite Breakup Model. Key features of the cloud model, including source attribution and debris mass constraints, are presented to enable further observations and characterization.

Gates, D.↗
NASA NTRS1979

Studies on remote sensing method of particle size and water density distribution in mists and clouds using laser radar techniques

A method of remote measurement of the particle size and density distribution of water droplets was developed. In this method, the size of droplets is measured from the Mie scattering parameter which is defined as the total-to-backscattering ratio of the laser beam. The water density distribution is obtained by a combination of the Mie scattering parameter and the extinction coefficient of the laser beam. This method was examined experimentally for the mist generated by an ultrasonic mist generator and applied to clouds containing rain and snow. Compared with the conventional sampling method, the present method has advantages of remote measurement capability and improvement in accuracy.

Shimizu, H.↗
NASA NTRS2017

MCRadar: A Monte Carlo Solver for Cloud and Precipitation Radar

Multiple scattering produces anomalous echoes in observed radar profiles that cannot be explained by other phenomena. These effects are most obvious for spaceborne platforms, at shorter wavelengths, and in convection, as multiple scattering is governed by antenna beam width, optical depth, and albe do; however, multiple scattering has been observed in a range of precipitating conditions. To account for the effects of multiple scattering, Monte Carlo integration is employed in a flexible framework to enable arbitrary radar configurations with finite Gaussian beams for three-dimensional atmospheric scenarios. The three-dimensional nature of the model, coupled with the finite antenna response, also allows for consideration of nonuniform beam filling effects that often coincide with multiple scattering. Examples of airborne and spaceborne radars at various wavelengths are used to illustrate the effects of multiple scattering and nonuniform beam filling. The MCRadar code is currently available in the development version of ARTS.

Adams, Ian Stuart↗
NASA NTRS2021

Dual Frequency Feed Horn Design for a Compact Cloud and Precipitation Radar Operating at Ka- and W-band

We present the design of a compact dual frequency feed horn optimized to operate at Ka-band (35.75 GHz) and W-band (94.05 GHz). The structure consists of a single spline profile horn along with a diplexer having orthogonal Ka- and W-band ports and a band pass filter at the Ka band port. The filter is used to achieve high isolation between the Ka- and W-band ports. A directivity of 21 dB and -12 dB beam width of 31 degrees was achieved at Ka-band and a directivity of 26 dB and -12 dB beam width of 21 degrees was achieved at W-band. The overall structure is compact and easy to machine. The dual frequency horn will be tested as part of a Ka/W-band breadboard radar.

Cofield, Rick↗
NASA NTRS2005

Radar Evaluation of Optical Cloud Constraints to Space Launch Operations

Weather constraints to launching space vehicles are designed to prevent loss of the vehicle or mission due to weather hazards (See, e.g., Ref 1). Constraints include Lightning Launch Commit Criteria (LLCC) designed to avoid natural and triggered lightning. The LLCC currently in use at most American launch sites including the Eastern Range and Kennedy Space Center require the Launch Weather Officer to determine the height of cloud bases and tops, the location of cloud edges, and cloud transparency. The preferred method of making these determinations is visual observation, but when that isn't possible due to darkness or obscured vision, it is permissible to use radar. This note examines the relationship between visual and radar observations in three ways: A theoretical consideration of the relationship between radar reflectivity and optical transparency. An observational study relating radar reflectivity to cloud edge determined from in-situ measurements of cloud particle concentrations that determine the visible cloud edge. An observational study relating standard radar products to anvil cloud transparency. It is shown that these three approaches yield results consistent with each other and with the radar threshold specified in Reference 2 for LLCC evaluation.

Merceret, Francis J.↗
DOE OSTI2025

Rapid SACR Observations of Convection at Bankhead National Forest (RAPID) Field Campaign Report

Improving our representation of convective cell processes requires better quantification of convective clouds throughout their entire life cycle. This includes gaining a clearer understanding of the controls on key convective cloud properties, such as updraft intensity, particle size distributions, rainfall rates, and hydrometeor species. Our inability to improve convective cloud process modeling stems, in part, from a limited understanding of convective cell properties, particularly given how rapidly these storms evolve. This lack of detailed observations in the most intense and organized convective storms is especially significant, as large errors remain in representing these clouds, which are critical for severe weather prediction and Earth system model performance. Cloud and precipitation radars are essential tools for studying cloud microphysics and dynamics, particularly in deeper convective clouds. The recent U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s third Mobile Facility (AMF3) Bankhead National Forest (BNF) deployment provides a unique opportunity to investigate important land–atmosphere interactions, as well as the environmental controls on deep convective cloud processes, in a location favorable for frequent convection. We operate the X/Ka-band Scanning ARM Cloud Radar (X/Ka SACR) using a scan strategy optimized to capture these rapidly evolving clouds and their properties, thereby improving studies of deep convective cloud processes. This effort is strengthened by a complementary and coordinated partnership with ongoing university and multi-agency radar activities collocated in north Alabama—a unique opportunity to examine clouds and precipitation from a lifetime-centric perspective.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2012

CloudSat Anomaly Recovery and Operational Lessons Learned

In April 2011, NASA's pioneering cloud profiling radar satellite, CloudSat, experienced a battery anomaly that placed it into emergency mode and rendered it operations incapable. All initial attempts to recover the spacecraft failed as the resultant power limitations could not support even the lowest power mode. Originally part of a six-satellite constellation known as the "A-Train", CloudSat was unable to stay within its assigned control box, posing a threat to other A-Train satellites. CloudSat needed to exit the constellation, but with the tenuous power profile, conducting maneuvers was very risky. The team was able to execute a complex sequence of operations which recovered control, conducted an orbit lower maneuver, and returned the satellite to safe mode, within one 65 minute sunlit period. During the course of the anomaly recovery, the team developed several bold, innovative operational strategies. Details of the investigation into the root-cause and the multiple approaches to revive CloudSat are examined. Satellite communication and commanding during the anomaly are presented. A radical new system of "Daylight Only Operations" (DO-OP) was developed, which cycles the payload and subsystem components off in tune with earth eclipse entry and exit in order to maintain positive power and thermal profiles. The scientific methodology and operational results behind the graduated testing and ramp-up to DO-OP are analyzed. In November 2011, the CloudSat team successfully restored the vehicle to consistent operational collection of cloud radar data during sunlit portions of the orbit. Lessons learned throughout the six-month return-to-operations recovery effort are discussed and offered for application to other R&D satellites, in the context of on-orbit anomaly resolution efforts.

cloud profiling radar satellite↗
NASA NTRS2012

Dynamics of Dust Particles Released from Oort Cloud Comets and Their Contribution to Radar Meteors

The Oort Cloud Comets (OCCs), exemplified by the Great Comet of 1997 (Hale-Bopp), are occasional visitors from the heatless periphery of the solar system. Previous works hypothesized that a great majority of OCCs must physically disrupt after one or two passages through the inner solar system, where strong thermal gradients can cause phase transitions or volatile pressure buildup. Here we study the fate of small debris particles produced by OCC disruptions to determine whether the imprints of a hypothetical population of OCC meteoroids can be found in the existing meteor radar data. We find that OCC particles with diameters D < or approx. 10 microns are blown out from the solar system by radiation pressure, while those with D > or approx. 1 mm have a very low Earth-impact probability. The intermediate particle sizes, D approx. 100 microns represent a sweet spot. About 1% of these particles orbitally evolve by Poynting-Robertson drag to reach orbits with semimajor axis a approx. 1 AU. They are expected to produce meteors with radiants near the apex of the Earth s orbital motion. We find that the model distributions of their impact speeds and orbits provide a good match to radar observations of apex meteors, except for the eccentricity distribution, which is more skewed toward e approx. 1 in our model. Finally, we propose an explanation for the long-standing problem in meteor science related to the relative strength of apex and helion/antihelion sources. As we show in detail, the observed trend, with the apex meteors being more prominent in observations of highly sensitive radars, can be related to orbital dynamics of particles released on the long-period orbits.

Nesvorny, David↗
NASA NTRS2001

Cloudsat Radar Instrument Design and Development Status

The Cloud Profiling Radar is the key science instrument for the CloudSat Mission to acquire a global data set of vertical atmospheric cloud structure and its variability. CPR is a 94 GHz nadir-looking radar that measures the power backscattered by clouds as a function of distance from the radar. This sensor is expected to provide cloud measurements at a 500-m vertical resolution and a 1.5-km horizontal resolution. CPR will operate in a short pulse mode and will yield measurements at a minimum detectable sensitivity of -28 dBZ.

CloudSat radar↗
NASA NTRS1992

Spaceborne Radar Would Measure Rain And Clouds

Report describes conceptual design of spaceborne radar system mapping precipitation and clouds at mid-latitudes to provide data for research on global weather and climate. Radar operates at two frequencies. Lower (35 GHz) provides vertical profiles of rainfall at rates up to 20 mm/h and enables probing of cirrus clouds. Higher (94 GHz) enables detection and quantitative measurements of clouds of all types and provides rain profiles at rates up to 10 mm/h.

Im, Eastwood↗
NASA NTRS1993

Estimation of cirrus cloud particle fallspeeds from vertically pointing Doppler radar

The First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment 2 (FIRE 2) was conducted in Coffeyville, Kansas in late 1991 to study the microphysical and radiative properties of cirrus clouds. A variety of active and passive remote sensors were employed, including an 8-mm-wavelength cloud-sensing Doppler radar developed at the Wave Propagation Laboratory (WPL). The radar, having excellent sensitivity to cloud particles (-30 dBZ at 10 km), good spatial resolution (37 m), and velocity precision (.05 ms -1), is an excellent tool for observing cirrus clouds. Having this radar directed toward the zenith for long periods of time during FIRE 2 permitted the reflectivity-weighted particle fallspeed to be related to reflectivity which allowed a separation of ice particle fallspeeds from vertical air motions. Additionally, such relationships proved useful in other multi-sensor techniques for determining vertical profiles of ice particle characteristic size and ice water content in cirrus clouds. The analysis method and the results of applying it to cirrus cloud reflectivity and velocity data collected during FIRE 2 are discussed.

Orr, Brad W.↗
DOE OSTI2025

Marine Boundary Layer Cloud Boundaries and Phase Estimation Using Airborne Radar and In Situ Measurements During the SOCRATES Campaign over Southern Ocean

The Southern Ocean Clouds, Radiation, Aerosol Transport Experimental Study (SOCRATES) was an aircraft-based campaign (15 January–26 February 2018) that deployed in situ probes and remote sensors to investigate low-level clouds over the Southern Ocean (SO). A novel methodology was developed to identify cloud boundaries and classify cloud phases in single-layer, low-level marine boundary layer (MBL) clouds below 3 km using the HIAPER Cloud Radar (HCR) and in situ measurements. The cloud base and top heights derived from HCR reflectivity, Doppler velocity, and spectrum width measurements agreed well with corresponding lidar-based and in situ estimates of cloud boundaries, with mean differences below 100 m. A liquid water content–reflectivity (LWC-Z) relationship, LWC = 0.70Z0.29, was derived to retrieve the LWC and liquid water path (LWP) from HCR profiles. The cloud phase was classified using HCR measurements, temperature, and LWP, yielding 40.6% liquid, 18.3% mixed-phase, and 5.1% ice samples, along with drizzle (29.1%), rain (3.2%), and snow (3.7%) for drizzling cloud cases. The classification algorithm demonstrates good consistency with established methods. This study provides a framework for the boundary and phase detection of MBL clouds, offering insights into SO cloud microphysics and supporting future efforts in satellite retrievals and climate model evaluation.

MBL clouds over Southern Ocean↗
NASA NTRS2013

On the Global Character of Overlap Between Low and High Clouds

The global character of overlap between low and high clouds is examined using active satellite sensors. Low-cloud fraction has a strong land-ocean contrast with oceanic values double those over land. Major low-cloud regimes include not only the eastern ocean boundary stratocumulus and shallow cumulus but also those associated with cold air outbreaks downwind of wintertime continents and land stratus over particular geographic areas. Globally, about 30% of low clouds are overlapped by high clouds. The overlap rate exhibits strong spatial variability ranging from higher than 90% in the tropics to less than 5% in subsidence areas and is anticorrelated with subsidence rate and low-cloud fraction. The zonal mean of vertical separation between cloud layers is never smaller than 5 km and its zonal variation closely follows that of tropopause height, implying a tight connection with tropopause dynamics. Possible impacts of cloud overlap on low clouds are discussed.

cloud overlap↗