Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex oxide heterostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Polarization-coupled tunable resistive behavior in oxide ferroelectric heterostructures

This research focuses on investigation of the physical mechanism of the electrically and mechanically tunable resistive behavior in oxide ferroelectric heterostructures with engineered interfaces realized via a strong coupling of ferroelectric polarization with tunneling electroresistance and metal-insulator (M-I) transitions. This report describes observation of electrically conductive domain walls in semiconducting ferroelectrics, voltage-free control of resistive switching and demonstration of a new mechanism of electrical control of 2D electron gas (2DEG) at oxide interfaces. The research goals are achieved by creating strong synergy between cutting-edge fabrication of epitaxial single-crystalline complex oxides, nanoscale electrical characterization by scanning probe microscopy and theoretical modeling of the observed phenomena. The concept of the ferroelectric devices with electrically and mechanically tunable nonvolatile resistance represents a new paradigm shift in realization of the next-generation of non-volatile memory devices and low-power logic switches.

36 MATERIALS SCIENCE↗

Low-temperature grapho-epitaxial La-substituted BiFeO 3 on metallic perovskite

Bismuth ferrite has garnered considerable attention as a promising candidate for magnetoelectric spin-orbit coupled logic-in-memory. As model systems, epitaxial BiFeO 3 thin films have typically been deposited at relatively high temperatures (650–800 °C), higher than allowed for direct integration with silicon-CMOS platforms. Here, we circumvent this problem by growing lanthanum-substituted BiFeO 3 at 450 °C (which is reasonably compatible with silicon-CMOS integration) on epitaxial BaPb 0.75 Bi 0.25 O 3 electrodes. Notwithstanding the large lattice mismatch between the La-BiFeO 3 , BaPb 0.75 Bi 0.25 O 3 , and SrTiO 3 (001) substrates, all the layers in the heterostructures are well ordered with a [001] texture. Polarization mapping using atomic resolution STEM imaging and vector mapping established the short-range polarization ordering in the low temperature grown La-BiFeO 3 . Current-voltage, pulsed-switching, fatigue, and retention measurements follow the characteristic behavior of high-temperature grown La-BiFeO 3 , where SrRuO 3 typically serves as the metallic electrode. These results provide a possible route for realizing epitaxial multiferroics on complex-oxide buffer layers at low temperatures and opens the door for potential silicon-CMOS integration.

36 MATERIALS SCIENCE↗

Photodeposition of Pt on Colloidal CdS and CdSe/CdS Semiconductor Nanostructures

Semiconductor photocatalysis has been identified as a promising avenue for the conversion of solar energy into environmentally friendly fuels, most notably by the production of hydrogen from water.[1-5] Nanometer-scale materials in particular have attracted considerable scientific attention as the building blocks for light-harvesting applications.[6,7] Their desirable attributes include tunability of the optical properties with size, amenability to relatively inexpensive low-temperature processing, and a high degree of synthetic sophistication leading to increasingly complex and multi-functional architectures. For photocatalysis in particular, the high surface-to-volume ratios in nanoscale materials should lead to an increased availability of carriers for redox reactions on the nanoparticle surface. Recombination of photoexcited carriers directly competes with photocatalytic activity.[3] Charge separation is often achieved with multi-component heterostructures. An early example is the case of TiO2 powders functionalized with Pt and RuO2 particles, where photoexcited electrons are transferred to Pt (the reduction site) and holes to RuO2 (the oxidation site).[8] More recently, many colloidally synthesized nanometer-scale metal-semiconductor heterostructures have been reported.[7,9,10] A majority of these structures are made by thermal methods.[7,10] We have chosen to study photochemical formation of metal-semiconductor heterostructures. The detailed understanding of the mechanisms involved in photodeposition of metals on nanometer-scale semiconductors is necessary to enable a high degree of synthetic control. At the same time, because the results of metal deposition can be directly observed by electron microscopy, it can be used to understand how factors such as nanocrystal composition, shape, carrier dynamics, and surface chemistry influence the photochemical properties of semiconductor nanocrystals. In this communication, we report on the photodeposition of Pt on colloidal CdS and CdSe/CdS core/shell nanocrystals. Among the II-VI semiconductors, CdS is of particular interest because it has the correct band alignment for water photolysis[2] and has been demonstrated to be photocatalytically active.[11-16] We have found that the photoexcitation of CdS and CdSe/CdS in the presence of an organometallic Pt precursor leads to deposition of Pt nanoparticles on the semiconductor surface. Stark differences are observed in the Pt nanoparticle location on the two substrates, and the photodeposition can be completely inhibited by the modification of the semiconductor surface. Our results suggest that tuning of the semiconductor band structure, spatial organization and surface chemistry should be crucial in the design of photocatalytic nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Strain-Driven Nanoscale Phase Competition near the Antipolar–Nonpolar Phase Boundary in Bi 0.7 La 0.3 FeO 3 Thin Films

Complex-oxide materials tuned to be near phase boundaries via chemistry/composition, temperature, pressure, etc. are known to exhibit large susceptibilities. Here, we observe a strain-driven nanoscale phase competition in epitaxially constrained Bi 0.7 La 0.3 FeO 3 thin films near the antipolar-nonpolar phase boundary and explore the evolution of the structural, dielectric, (anti)ferroelectric, and magnetic properties with strain. We find that compressive and tensile strains can stabilize an antipolar PbZrO 3 -like Pbam phase and a nonpolar Pnma orthorhombic phase, respectively. Heterostructures grown with little to no strain exhibit a self-assembled nanoscale mixture of the two orthorhombic phases, wherein the relative fraction of each phase can be modified with film thickness. Subsequent investigation of the dielectric and (anti)ferroelectric properties reveals an electric-field-driven phase transformation from the nonpolar phase to the antipolar phase. X-ray linear dichroism reveals that the antiferromagnetic-spin axes can be effectively modified by the strain-induced phase transition. This evolution of antiferromagnetic-spin axes can be leveraged in exchange coupling between the antiferromagnetic Bi 0.7 La 0.3 FeO 3 and a ferromagnetic Co0.9Fe0.1 layer to tune the ferromagnetic easy axis of the Co 0.9 Fe 0.1 . These results demonstrate that besides chemical alloying, epitaxial strain is an alternative and effective way to modify subtle phase relations and tune physical properties in rare earth-alloyed BiFeO 3 . Furthermore, the observation of antiferroelectric-antiferromagnetic properties in the Pbam Bi 0.7 La 0.3 FeO 3 phase could be of significant scientific interest and great potential in magnetoelectric devices because of its dual antiferroic nature.

36 MATERIALS SCIENCE↗

Oxides Heterostructures for Nanoelectronics

We summarise in this paper the work of two groups focusing on the synthesis and characterisation of functional oxide for nanoelectronic applications. In the first section, we discuss the growth by liquid-injection MOCVD of oxides heterostructures. Interface engineering for the minimisation of silicate formation during the growth of polycrystalline SrTiO{sub 3} on Si is first presented. It is realised via the change of reactant flow or chemical nature at the Si surface. We then report on the epitaxy on oxide substrates of manganites films and superlattices and on their magnetic and electrical properties. La{sub 0.7}Sr{sub 0.3}MnO{sub 3} and La{sub 0.8}MnO{sub 3-{delta}} as well as multiferroic hexagonal ReMnO{sub 3} manganites are considered. We show that the film thickness and related strain may be used to tune the properties. Finally, we demonstrate the growth of MgO nanowires by CVD at a moderate temperature of 600 C, using gold as a catalyst. In the second section, we discuss the growth of epitaxial oxide heterostructures by MBE. First, the direct epitaxy of SrTiO{sub 3} on Si is considered. Issues and control of the SrTiO{sub 3}/Si interface are discussed. An abrupt interface is achieved. We show that SrTiO{sub 3} on Si can be used as a buffer layer for the epitaxy of various perovskite oxides such as LaAlO{sub 3} or La{sub 0.7}Sr0.3MnO{sub 3}. La{sub 0.7}Sr{sub 0.3}MnO{sub 3} films are ferromagnetic and metallic at room temperature. The epitaxial growth of complex oxides on Si wafers opens up the route to the integration of a wide variety of functionalities in nanoelectronics. Finally, we discuss the monolithic integration of III-V compounds such as InP on Si using epitaxial SrTiO{sub 3} buffer layers for the future integration of optics on Si.

36 MATERIALS SCIENCE↗

Adatom-Driven Oxygen Intermixing during the Deposition of Oxide Thin Films by Molecular Beam Epitaxy

Thin film deposition from the vapor phase is a complex process involving adatom adsorption, movement, and incorporation into the growing film. While simulations have been able to capture key aspects of these processes to reproduce film morphology, these models typically ignore any subsurface diffusion that occurs. The results of these diffusion and intermixing processes are often observed experimentally, but cannot be explained by invoking bulk lattice diffusion at the deposition temperature. In this work, we present quantitative experimental data that reveals anion and cation intermixing over long length scales during the deposition of epitaxial Fe 2 O 3 and Cr 2 O 3 films and heterostructures by oxygen-plasma-assisted molecular beam epitaxy. We track this diffusion by incorporating well-defined tracer layers containing 18 O and/or 57 Fe, and measure their redistribution on the nanometer scale with atom probe tomography. Molecular dynamics simulations suggest potential intermixing events, which are then examined via nudged elastic band calculations. These reveal that adatoms on the film surface act to “pull up” subsurface O and Fe. Subsequent ring-like rotation mechanisms involving both adatom and subsurface anions then facilitate their mixing. A simple model incorporating these events qualitatively agrees with the experimental intermixing results. In addition to film deposition, these intermixing mechanisms may to be operant during other surface-mediated processes such as heterogeneous catalysis and corrosion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Origin of the magnetoelectric coupling effect in Pb(Zr{sub 0.2}Ti{sub 0.8})O3/La{sub 0.8}Sr{sub 0.2}MnO{sub 3} multiferroic heterostructures.

The electronic valence state of Mn in Pb(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}/La{sub 0.8}Sr{sub 0.2}MnO{sub 3} multiferroic heterostructures is probed by near edge x-ray absorption spectroscopy as a function of the ferroelectric polarization. We observe a temperature independent shift in the absorption edge of Mn associated with a change in valency induced by charge carrier modulation in the La{sub 0.8}Sr{sub 0.2}MnO{sub 3}, demonstrating the electronic origin of the magnetoelectric effect. Spectroscopic, magnetic, and electric characterization shows that the large magnetoelectric response originates from a modified interfacial spin configuration, opening a new pathway to the electronic control of spin in complex oxide materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron Doping by Charge Transfer at LaFeO 3 /Sm 2 CuO 4 Epitaxial Interfaces

The breakdown of the lattice translational invariance symmetry that occurs at complex oxide interfaces may profoundly modify their electronic structure, leading to interfacial states with properties drastically different from those of the superlattice individual components. The appearance of a conducting two dimensional (2D) electron gas at the interface between two insulating oxides and induced magnetism in a non-magnetic material are just two among many fascinating examples. [ 1 8 ] One of the key factors underlying novel properties is the modifi cation of the doping and orbital occupancy near those interfaces, which may result from charge transfer processes. [ 3 , 9 11 ] If materials used in heterostructures have different work functions, a non-equilibrium situation will be created at the interface and charge will be transferred until the chemical potential levels off. [ 12 ] The use of such phenomena to modify doping in heterostructures has been proposed theoretically as a new route to avoid the quenched disorder that inevitably accompanies the chemical doping. At the interface between a Mott insulating parent compound of the high critical temperature superconductor (HTSC) family and a suitable material that would act as the charge donor, electron doped phases could be stabilized which would eventually turn metallic and perhaps superconducting. [ 12 , 13 ] Such charge transfer processes have been observed at interfaces involving copper oxides such as La 0.7 Ca 0.3 MnO 3 / YBa 2 Cu 3 O 7 , [ 14 ] La 2 x Sr x CuO 4 /La 2 CuO 4 [ 15 ] and SrTi 1 x Nb x O 3 / Sm 2 CuO 4 . [ 16 ] While a novel 2D superconducting state was found at the La 2-x Sr x CuO 4 /La 2 CuO 4 interface, [ 17 ] the effect of doping by charge transfer could not be examined in the other two cases due to the detrimental effect on the YBa 2 Cu 3 O 7 superconductivity of the spin polarized electrons from La 0.7 Ca 0.3 MnO 3 in one case and due to the conducting nature of the SrTi 1 x Nb x O 3 in the other case, which obscures changes in the conducting properties of the interface layer. In this paper, the structural and

Bruno, Flavio Y.↗

BiFeO{sub 3}/La{sub 0.7}Sr{sub 0.3}MnO{sub 3} heterostructures deposited on spark plasma sintered LaAlO{sub 3} substrates

Multiferroic BiFeO{sub 3} (BFO)/La{sub 0.7}Sr{sub 0.3}MnO{sub 3} heterostructured thin films were grown by pulsed laser deposition on polished spark plasma sintered LaAlO{sub 3} (LAO) polycrystalline substrates. Both polycrystalline LAO substrates and BFO films were locally characterized using electron backscattering diffraction, which confirmed the high-quality local epitaxial growth on each substrate grain. Piezoforce microscopy was used to image and switch the piezo-domains, and the results are consistent with the relative orientation of the ferroelectric variants with the surface normal. This high-throughput synthesis process opens the routes towards wide survey of electronic properties as a function of crystalline orientation in complex oxide thin film synthesis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Machine Learning Applied to a Variable Charge Atomistic Model for Cu/Hf Binary Alloy Oxide Heterostructures [Machine Learning a Variable Charge Atomistic Model for Cu/Hf Binary Alloy Oxide Heterostructures]

Alloy oxide heterostructures are essential for a wide variety of energy applications, including anticorrosion coatings, bifunctional catalysis, energy storage, as well as emerging platforms for multilevel nonvolatile memory and neuromorphic devices. The key role played by oxide composition, density, and stoichiometry in governing electrochemical reactions, interface structure, and ionic transport in alloy oxides remains largely unknown. This is primarily due to the lack of variable charge interatomic potential models that can adequately describe the various atomic/ionic interactions in alloy oxides within a unified framework. Here, we introduce a charge transfer ionic potential (CTIP) model for Cu/Hf/O alloy system and demonstrate its ability to accurately capture the complex potential energy surface owing to dynamically varying interactions, including metallic (Cu/Hf), ionic (Cu/Hf/Ox), mixed environment (interfaces). We leverage supervised machine learning methods powered by genetic algorithms coupled with local simplex optimization to efficiently navigate through a high-dimensional parameter space and identify an optimum set of an independent set of CTIP parameters. We train our model against an extensive first-principles based data set that includes lattice constants, cohesive energies, equations of state, and elastic constants of various experimentally observed polymorphs of hafnia, copper oxide, hafnium, as well as copper. Our machine-learned CTIP model captures the structure, elastic properties, thermodynamics, and energetic ordering of various polymorphs. It also accurately predicts the surface properties of both oxides and their metals. To demonstrate the suitability of our CTIP model for investigating dynamic processes, we employed it to identify the atomistic scale mechanisms associated with the initial nanoscale oxidation and surface oxide growth on Cu-doped hafnia surfaces. Here, our machine-learned CTIP model can be used to probe the dynamic response of Cu/Hf/O alloy interfaces subjected to external stimuli (e.g., electric field, pressure, temperature, strain, etc.) and a variety of atomistic phenomena including the dynamics of switching in emerging neuromorphic platforms.

36 MATERIALS SCIENCE↗

Ferroelectric Self-Polarization Controlled Magnetic Stratification and Magnetic Coupling in Ultrathin La 0.67 Sr 0.33 MnO 3 Films

Multiferroic oxide heterostructures consisting of ferromagnetic and ferroelectric components hold the promise for nonvolatile magnetic control via ferroelectric polarization, advantageous for the low-dissipation spintronics. Modern understanding of the magnetoelectric coupling in these systems involves structural, orbital, and magnetic reconstructions at interfaces. Previous works have long proposed polarization-dependent interfacial magnetic structures; however, direct evidence is still missing, which requires advanced characterization tools with near-atomic-scale spatial resolutions. Here, extensive polarized neutron reflectometry (PNR) studies have determined the magnetic depth profiles of PbZr 0.2 Ti 0.8 O 3 /La 0.67 Sr 0.33 MnO 3 (PZT/LSMO) bilayers with opposite self-polarizations. When the LSMO is 2–3 nm thick, the bilayers show two magnetic transitions on cooling. However, temperature-dependent magnetization is different below the lower-temperature transition for opposite polarizations. PNR finds that the LSMO splits into two magnetic sublayers, but the inter-sublayer magnetic couplings are of opposite signs for the two polarizations. Near-edge X-ray absorption spectroscopy further shows contrasts in both the Mn valences and the Mn–O bond anisotropy between the two polarizations. Finally, this work completes the puzzle for the magnetoelectric coupling model at the PZT/LSMO interface, showing a synergic interplay among multiple degrees of freedom toward emergent functionalities at complex oxide interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nitride-Oxide-Metal Heterostructure with Self-Assembled Core–Shell Nanopillar Arrays: Effect of Ordering on Magneto-Optical Properties

Magneto-optical (MO) coupling incorporates photon-induced change of magnetic polarization that can be adopted in ultrafast switching, optical isolators, mode convertors, and optical data storage components for advanced optical integrated circuits. However, integrating plasmonic, magnetic, and dielectric properties in one single material system poses challenges since one natural material can hardly possess all these functionalities. Here, co-deposition of a three-phase heterostructure composed of a durable conductive nitride matrix with embedded core–shell vertically aligned nanopillars, is demonstrated. Additionally, the unique coupling between ferromagnetic NiO core and atomically sharp plasmonic Au shell enables strong MO activity out-of-plane at room temperature. Further, a template growth process is applied, which significantly enhances the ordering of the nanopillar array. The ordered nanostructure offers two schemes of spin polarization which result in stronger antisymmetry of Kerr rotation. The presented complex hybrid metamaterial platform with strong magnetic and optical anisotropies is promising for tunable and modulated all-optical-based nanodevices.

36 MATERIALS SCIENCE↗

Tunneling electroresistance effects in epitaxial complex oxides on silicon

Complex oxide-based ferroelectric tunnel junctions (FTJs) show excellent nonvolatile memory characteristics promising for emerging technology. However, integration of these epitaxially grown FTJs electrically with a silicon substrate remains challenging due to their incompatible lattice structures and poor electronic interfaces resulting from the direct synthesis techniques. Here, we present an epitaxial SrRuO 3 /PbZr 0.2 Ti 0.8 O 3 /SrRuO 3 FTJ integrated electrically with a doped silicon substrate after a layer transfer process. The tunnel currents of the FTJ on silicon show a large tunneling electroresistance (~1×10 5 %) effect, which is explained by a numerical FTJ model incorporating pinned dipoles at the interfaces. This proof of concept of the integration of functional oxide heterostructures with silicon opens a pathway to beyond-CMOS computing devices using unconventional materials.

36 MATERIALS SCIENCE↗

Spatially Resolved Large Magnetization in Ultrathin BiFeO 3

Complex interactions across the interface in heterostructures can generate novel functionalities not present in the constituent materials. Here, we create a unique ferromagnetic ground state out of normally antiferromagnetic BiFeO 3 (BFO) by interleaving it with layers of ferromagnetic La 0.7 Sr 0.3 MnO 3 . Intriguingly, we found that the magnetization of BFO was aligned opposite to that of the manganite layers. Based on polarized neutron reflectometry (PNR) depth profiling of custom-designed layers, we obtained a net magnetization in the BFO layers of 275 kA/m (~1.83 B/Fe) at 10 K, which is two times larger than the previously reported values. Additionally, ferromagnetic order in the BFO persists up to 200 K, which is much higher than previously seen in BFO heterostructures. Our unprecedented understanding of the evolution of magnetism and functional coupling across the interface between antiferromagnetic and ferromagnetic layers provides a blueprint towards advanced spintronic devices.

36 MATERIALS SCIENCE↗

Oxygen Diode Formed in Nickelate Heterostructures by Chemical Potential Mismatch

Deliberate control of oxygen vacancy formation and migration in perovskite oxide thin films is important for developing novel electronic and iontronic devices. Here in this paper, it is found that the concentration of oxygen vacancies (V O ) formed in LaNiO 3 (LNO) during pulsed laser deposition is strongly affected by the chemical potential mismatch between the LNO film and its proximal layers. Increasing the V O concentration in LNO significantly modifies the degree of orbital polarization and drives the metal–insulator transition. Changes in the nickel oxidization state and carrier concentration in the films are confirmed by soft X-ray absorption spectroscopy and optical spectroscopy. The ability to unidirectional-control the oxygen flow across the heterointerface, e.g., a so-called “oxygen diode”, by exploiting chemical potential mismatch at interfaces provides a new avenue to tune the physical and electrochemical properties of complex oxides.

36 MATERIALS SCIENCE↗

Epitaxial growth of conducting perovskite SrTiO3 on (0001) c-axis sapphire using a γ-Al2O3 intermediate layer

Epitaxial growth of complex oxides on large-area wafers, such as sapphire and silicon, represents a key step toward scalable oxide device production. Solid phase epitaxy allows the synthesis of γ-Al 2 O 3 on α-Al 2 O 3 and provides a template with a matched lattice constant and appropriate cubic symmetry for subsequent heteroepitaxial growth of perovskite complex oxides. Nb-doped SrTiO 3 thin films were deposited epitaxially on (111)-oriented γ-Al 2 O 3 intermediate layers on (0001) c-axis-oriented sapphire α-Al 2 O 3 crystals using pulsed laser deposition. The Nb:SrTiO 3 thin films with a thickness of 53 nm, grown at 700 °C on γ-Al 2 O 3 , reached fully relaxed lattice parameters and were epitaxially oriented with respect to the substrate. Nb:SrTiO 3 layers deposited using identical deposition conditions directly on α-Al 2 O 3 , without the γ-Al 2 O 3 intermediate layer, were polycrystalline. The sheet conductivity of Nb:SrTiO 3 grown on γ-Al 2 O 3 /α-Al 2 O 3 is more than ten times higher than that of Nb:SrTiO 3 grown directly on α-Al 2 O 3 without the γ-Al 2 O 3 layer. The results point to new directions for the integration of (111)-oriented pseudocubic perovskite complex oxides and the integration of epitaxial complex oxides over larger areas using α-Al 2 O 3 single-crystal substrates.

Atomic force microscopy↗

Enhanced performance of Bi 2 S 3 /TiO 2 heterostructure composite films for solar cell applications

Day to day energy production is shifting towards renewable energy sources as these sources become more economically viable while being less polluting to operate; solar energy has become one of the major sources of renewable energy. However, it currently relies on ultra-pure silicon ingots to produce commercial silicon photovoltaics, which prevents the cost of electricity being produced to compete with non-renewable energy production. A viable low-cost alternative for silicon based cells would be dye-sensitized solar cells (DSSCs), which are easier and cheaper to manufacture as they do not require expensive and delicate raw materials to make. Moreover, they could be made semi-flexible which allows for a greater variety of applications. A DSSC consists of three components, a photo-electrode, an electrolyte and a counter-electrode. When exposed to incident light, the complex photosensitizers in the photoelectrode release electrons which are transported to the external load, leaving the photoelectrode in an oxidized state. The electrons are collected by the counter electrode and used to reduce the electrolyte. This charged electrolyte then reduces the positively charged photoelectrode, allowing the process to begin again. To improve the efficiency of this process, we explore the use of bismuth sulfide (Bi 2 S 3 ) and titanium oxide (TiO 2 ) composite as photoelectrode material and investigate their impact on the efficiency of DSSC.

14 SOLAR ENERGY↗