Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Evaluation of NASA's High-Resolution Global Composition Simulations: Understanding a Pollution Event in the Chesapeake Bay During the Summer 2017 OWLETS Campaign

Recirculation of pollutants due to a bay breeze effect is a key meteorological mechanism impacting air quality near urban coastal areas, but regional and global chemical transport models have historically struggled to capture this phenomenon. We present a case study of a high ozone (O3) episode observed over the Chesapeake Bay during the NASA Ozone Water-Land Environmental Transition Study (OWLETS) in summer 2017. OWLETS included a complementary suite of ground-based and airborne observations, with which we characterize the meteorological and chemical context of this event and develop a framework to evaluate model performance. Two publicly-available NASA global high-resolution coupled chemistry-meteorology models (CCMMs) are investigated: GEOS-CF and MERRA2-GMI. The GEOS-CF R squared value for comparisons between the NASA Sherpa C-23 aircraft measurements to the GEOS-CF resulted in good agreement (R squared: 0.67) on July 19th and fair agreement (R squared: 0.55) for July 20th. Compared to surface observations, we find the GEOS-CF product with a 25 x 25 km squared grid box, at an hourly (R squared: 0.62 to 0.87) and 15-minute (R squared: 0.64 to 0.87) interval for six regional sites outperforms the hourly nominally 50 x 50 km squared gridded MERRA2-GMI (R squared: 0.53 to 0.76) for four of the six sites, suggesting it is better capable of simulating complex chemical and meteorological features associated with ozone transport within the Chesapeake Bay airshed. When the GEOS-CF product was compared to the TOLNet LiDAR observations at both NASA Langley Research Center (LaRC) and the Chesapeake Bay Bridge Tunnel (CBBT), the median differences at LaRC were -6 to 8% and at CBBT were ± 7% between 400 to 2000 m ASL. This indicates that, for this case study, the GEOS-CF is able to simulate surface level ozone diurnal cycles and vertical ozone profiles at small scales between the surface level and 2000 m ASL. Evaluating global chemical model simulations at sub-regional scales will help air quality scientists understand the complex processes occurring at small spatial and temporal scales within complex surface terrain changes, simulating nighttime chemistry and deposition, and the potential to use global chemical transport simulations in support of regional and sub-regional field campaigns.

NASA Ozone Water-Land Environmental Transition Stu↗

Machine learning based systems and methods for real time, model based diagnosis

The disclosure following relates generally to complex simulations, and fault diagnosis. In some embodiments, a component that is causing a delayed simulation time of a system is determined. A component of reduced complexity is designed, and the component of reduced complexity is used to replace the original component in the system. Fault diagnosis may then be conducted using the updated system with the reduced complexity component, thus decreasing the time taken to diagnose the fault.

Matei, Ion↗

Bayesian, Multifidelity Operator Learning for Complex Engineering Systems–A Position Paper

Abstract Deep learning has significantly improved the state-of-the-art in computer vision and natural language processing, and holds great potential to design effective tools for predicting and simulating complex engineering systems. In particular, scientific machine learning seeks to apply the power of deep learning to scientific and engineering tasks, with operator learning (OL) emerging as a particularly effective tool. OL can approximate nonlinear operators arising in complex engineering systems, making it useful for simulating, designing, and controlling those systems. In this position paper, we provide a comprehensive overview of OL, including its potential applications to complex engineering domains. We cover three variations of OL approaches: deterministic OL for modeling nonautonomous systems, OL with uncertainty quantification (UQ) capabilities, and multifidelity OL. For each variation, we discuss drawbacks and potential applications to engineering, in addition to providing a detailed explanation. We also highlight how multifidelity OL approaches with UQ capabilities can be used to design, optimize, and control engineering systems. Finally, we outline some potential challenges for OL within the engineering domain.

Computer Science↗

A full-scope, high-fidelity simulator-based hardware-in-the-loop testbed for comprehensive nuclear power plant cybersecurity research

Nuclear power plant (NPP) cybersecurity research often relies on hardware-in-the-loop (HIL) testbeds that integrate real hardware components into simulated environments. These testbeds allow researchers to identify vulnerabilities, evaluate attack impacts, and test security measures in a controlled setting. Furthermore, previous HIL testbeds lacked fidelity to accurately represent real nuclear systems, limiting the scope of cybersecurity analysis. This study presents the creation of a HIL testbed, devised upon a full-scope, high-fidelity NPP simulator, to facilitate realistic and comprehensive cybersecurity research. To demonstrate its capabilities, the control logic for the steam generator water level was migrated from the simulator to an external programmable logic controller. As a practical application of the developed testbed, supply chain attack scenarios were simulated by injecting malicious code into the controller logic, and the effects of manipulating sensor inputs and control commands were observed. While this HIL testbed provides more detailed simulations, enhanced realism, and wider applicability compared to other options utilizing a less complex simulator, it is also more intricate and costly. For this reason, we include a detailed comparison with some alternative architectures to aid fellow researchers and practitioners in the selection of a suitable HIL architecture based on specific research objectives.

47 OTHER INSTRUMENTATION↗

CMU DeepLens: deep learning for automatic image-based galaxy–galaxy strong lens finding

Galaxy-scale strong gravitational lensing can not only provide a valuable probe of the dark matter distribution of massive galaxies, but also provide valuable cosmological constraints, either by studying the population of strong lenses or by measuring time delays in lensed quasars. Due to the rarity of galaxy-scale strongly lensed systems, fast and reliable automated lens finding methods will be essential in the era of large surveys such as Large Synoptic Survey Telescope, Euclid and Wide-Field Infrared Survey Telescope. To tackle this challenge, we introduce CMU DeepLens, a new fully automated galaxy-galaxy lens finding method based on deep learning. This supervised machine learning approach does not require any tuning after the training step which only requires realistic image simulations of strongly lensed systems. We train and validate our model on a set of 20 000 LSST-like mock observations including a range of lensed systems of various sizes and signal-to-noise ratios (S/N). We find on our simulated data set that for a rejection rate of non-lenses of 99 per cent, a completeness of 90 per cent can be achieved for lenses with Einstein radii larger than 1.4 arcsec and S/N larger than 20 on individual g-band LSST exposures. Finally, we emphasize the importance of realistically complex simulations for training such machine learning methods by demonstrating that the performance of models of significantly different complexities cannot be distinguished on simpler simulations. We make our code publicly available at https://github.com/McWilliamsCenter/CMUDeepLens.

gravitational lensing: strong↗

Abaqus Simulations of Rock Response to Dynamic Loading

The LANL Geodynamics Team has been applying Abaqus modeling to achieve increasingly complex simulations. Advancements in Abaqus model building and simulation tools allows this progress. We use Lab-developed constitutive models, the fully coupled CEL Abaqus and general contact to simulate response of realistic sites to explosively driven shock.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Phase Equilibrium of Water with Hexagonal and Cubic Ice Using the SCAN Functional

Machine learning models are rapidly becoming widely used to simulate complex physicochemical phenomena with ab initio accuracy. Here, we use one such model as well as direct density functional theory (DFT) calculations to investigate the phase equilibrium of water, hexagonal ice (Ih), and cubic ice (Ic), with an eye toward studying ice nucleation. The machine learning model is based on deep neural networks and has been trained on DFT data obtained using the SCAN exchange and correlation functional. We use this model to drive enhanced sampling simulations aimed at calculating a number of complex properties that are out of reach of DFT-driven simulations and then employ an appropriate reweighting procedure to compute the corresponding properties for the SCAN functional. This approach allows us to calculate the melting temperature of both ice polymorphs, the driving force for nucleation, the heat of fusion, the densities at the melting temperature, the relative stability of ices Ih and Ic, and other properties. We find a correct qualitative prediction of all properties of interest. In some cases, quantitative agreement with experiment is better than for state-of-the-art semiempirical potentials for water. Furthermore, our results also show that SCAN correctly predicts that ice Ih is more stable than ice Ic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ordering Unstructured Meshes for Sparse Matrix Computations on Leading Parallel Systems

The ability of computers to solve hitherto intractable problems and simulate complex processes using mathematical models makes them an indispensable part of modern science and engineering. Computer simulations of large-scale realistic applications usually require solving a set of non-linear partial differential equations (PDES) over a finite region. For example, one thrust area in the DOE Grand Challenge projects is to design future accelerators such as the SpaHation Neutron Source (SNS). Our colleagues at SLAC need to model complex RFQ cavities with large aspect ratios. Unstructured grids are currently used to resolve the small features in a large computational domain; dynamic mesh adaptation will be added in the future for additional efficiency. The PDEs for electromagnetics are discretized by the FEM method, which leads to a generalized eigenvalue problem Kx = AMx, where K and M are the stiffness and mass matrices, and are very sparse. In a typical cavity model, the number of degrees of freedom is about one million. For such large eigenproblems, direct solution techniques quickly reach the memory limits. Instead, the most widely-used methods are Krylov subspace methods, such as Lanczos or Jacobi-Davidson. In all the Krylov-based algorithms, sparse matrix-vector multiplication (SPMV) must be performed repeatedly. Therefore, the efficiency of SPMV usually determines the eigensolver speed. SPMV is also one of the most heavily used kernels in large-scale numerical simulations.

Oliker, Leonid↗

Navier-Stokes simulation of 3-D hypersonic equilibrium air flow

A computationally efficient three-dimensional conservative supracharacteristic Navier-Stokes method has been extended to simulate complex external chemically reacting flows of hypersonic reentry vehicles at angle-of-attack. Numerical simulation results of the flow around a sphere-cone-cone-flare reentry vehicle at 10 deg angle-of-attack are presented, in addition to the results of a well-validated two-dimensional code with which the 0-deg axisymmetric flow has been computed. A method for obtaining compositions of species in equilibrium ionized air is proposed.

Nagaraj, N.↗

Parallel Performance of the Time Dependent Transport Code TDKENO with Applications to TREAT Simulations

Renewed interest in high fidelity simulation of excursion events has prompted the improvement of codes that solve the time-dependent Boltzmann transport equation. Often these codes make approximations to the transport equation in order to achieve results in a reasonable amount of time. One method, the improved quasi-static (IQS), makes few approximations compared to adiabatic, diffusion, and point kinetics. This is the methodology employed by the code TDKENO. One downside to this approach is a portion of the calculation (flux shape) is done with a Monte Carlo code and must be called upon several times. To minimize run time the flux shape calculation is solved with a modified version of KENO-VI from Scale 6.2. This version of KENO runs in parallel across hundreds of nodes, thus improving performance. The parallel capabilities of KENO allows TDKENO to simulate complex transient experiments with a large number of histories. These improvements are applied to the simulation of TREAT calibration experiments. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Towards Predictive Plasma Science and Engineering through Revolutionary Multi-Scale Algorithms and Models (Final Report)

This report describes the high-level accomplishments from the Plasma Science and Engineering Grand Challenge LDRD at Sandia National Laboratories. The Laboratory has a need to demonstrate predictive capabilities to model plasma phenomena in order to rapidly accelerate engineering development in several mission areas. The purpose of this Grand Challenge LDRD was to advance the fundamental models, methods, and algorithms along with supporting electrode science foundation to enable a revolutionary shift towards predictive plasma engineering design principles. This project integrated the SNL knowledge base in computer science, plasma physics, materials science, applied mathematics, and relevant application engineering to establish new cross-laboratory collaborations on these topics. As an initial exemplar, this project focused efforts on improving multi-scale modeling capabilities that are utilized to predict the electrical power delivery on large-scale pulsed power accelerators. Specifically, this LDRD was structured into three primary research thrusts that, when integrated, enable complex simulations of these devices: (1) the exploration of multi-scale models describing the desorption of contaminants from pulsed power electrodes, (2) the development of improved algorithms and code technologies to treat the multi-physics phenomena required to predict device performance, and (3) the creation of a rigorous verification and validation infrastructure to evaluate the codes and models across a range of challenge problems. These components were integrated into initial demonstrations of the largest simulations of multi-level vacuum power flow completed to-date, executed on the leading HPC computing machines available in the NNSA complex today. These preliminary studies indicate relevant pulsed power engineering design simulations can now be completed in (of order) several days, a significant improvement over pre-LDRD levels of performance.

42 ENGINEERING↗

Bi-fidelity modeling of uncertain and partially unknown systems using DeepONets

Recent advances in modeling large-scale, complex physical systems have shifted research focuses towards data-driven techniques. However, generating datasets by simulating complex systems can require significant computational resources. Similarly, acquiring experimental datasets can prove difficult. For these systems, often computationally inexpensive, but in general inaccurate models, known as the low-fidelity models, are available. Here in this paper, we propose a bi-fidelity modeling approach for complex physical systems, where we model the discrepancy between the true system's response and a low-fidelity response in the presence of a small training dataset from the true system's response using a deep operator network, a neural network architecture suitable for approximating nonlinear operators. We apply the approach to systems that have parametric uncertainty and are partially unknown. Three numerical examples are used to show the efficacy of the proposed approach to model uncertain and partially unknown physical systems.

MATHEMATICS AND COMPUTING↗

The impact of mineral reactive surface area variation on simulated mineral reactions and reaction rates

Reactive transport modeling is an essential tool to simulate complex geochemical reactions in porous media that can impact formation properties including porosity and permeability. However, simulating these reactions is challenging due to uncertainties in model parameters, particularly mineral surface areas. Imaging has emerged as a powerful means of estimating model parameters including porosity and mineral abundance, accessibility and accessible surface area. However, these parameters, particularly mineral accessible surface area, vary with image resolution. This work aims to enhance understanding of the impact of image resolution and other means of estimating mineral reactive surface area on simulated mineral reactions and reaction rates. Mineral surface areas calculated from images with resolutions of 0.34 μm and 5.71 μm were used to simulate mineral reactions in the context of geologic CO 2 sequestration in the Paluxy formation at the continuum scale. Additional simulations were carried out using BET surface areas collected from the literature and geometric surface areas. Simulations were run for 7300 days and mineral volume fractions and effluent ion concentrations tracked and compared. Variations in mineral surface areas measured from images are within 1 order of magnitude and yield similar simulation results, indicating the impact of image resolution on simulated reactions and reaction rates is minimum for the resolutions and sample considered. In comparison, surface areas obtained from BET and geometric approaches are 1–4 orders of magnitude higher than image-obtained surface areas and result in greater simulated reaction rates and extents. Minerals with high reaction rates (calcite and siderite) are most impacted by surface area values at short times where simulated mineral volume fractions at longer times agree relatively well, even for simulations with several orders of magnitude variation in surface area. Phases with lower reaction rates, such as K-feldspar and muscovite, are predominantly impacted over longer times where variations in surface areas impact reaction extents and porosity evolution. Overall, variations in surface areas due to image resolution are small and result in little variation in simulated reactions and reaction rates while there are significant variations in simulation results when other surface area estimates are used. These variations, however, depend on the reactivity of the mineral phase where surface areas of fast-reacting phases largely impact simulations at short (hours to days) timescales and surface areas of slower-reactive phases impact longer term simulations (years).

58 GEOSCIENCES↗

A newly proposed isotherm model to predict Cs exchange with crystalline silicotitanate in tank waste simulants

The Zheng Anthony Miller (ZAM) computer model, a multicomponent ion exchange model used to predict the exchange of Group I metals onto crystalline silicotitanate (CST), has historically been used to predict Cs distribution coefficients from Hanford and Savannah River Site (SRS) tank waste simulants. Comparison of experimentally determined Cs distribution coefficients from tank waste simulants with ZAM isotherm model predictions indicate overprediction of Cs and K distribution coefficients for simple and complex simulants with the engineered form of CST. Additionally, recent changes in chemical composition/manufacturing of IONSIV TM R9140-B have resulted in increased Cs capacity from high-salt, highly alkaline solutions. Here, this work served to assess different isotherm models and refine equilibrium parameters to develop a model that can be applied to Hanford and SRS tank waste Cs removal efforts. Toward this goal, the Campbell Westesen Peterson (CWP) model was developed. This model utilized the experimentally determined Cs capacity, and simplified ZAM equilibria expressions to include only the binary substitution of Cs + or K + on the Na + sites. Equilibrium constants for these equations were refined using experimentally determined distribution coefficients. Overall, the CWP model significantly improved our ability to predict both Cs and K loading capacity from complex matrices.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Active Subspace Methods for Data-Intensive Inverse Problems (Final Report)

Fostered by advances in computing, simulation and data science have emerged as the third and fourth paradigms enabling scientific discovery. Many mathematical challenges arise when integrating these paradigms to produce new knowledge. One of the most important challenges is the inverse or calibration problem: find the inputs of a simulation such that its outputs agree with a given set of measurements. As both the cost of the complex simulations and the volume of measurement data sets increase, intuition-driven trial-and-error methods for calibration quickly become untenable; modern scientists need more computationally efficient and mathematically rigorous methods. When measurements and simulated predictions contain uncertainty, the Bayesian perspective on statistical inference provides a popular mathematical framework for developing computational methods to solve inverse problems. Markov chain Monte Carlo (MCMC) methods are a mainstay of this framework; they characterize a probability distribution on the space of model inputs that is conditioned on the given measurements. However, despite recent advances, MCMC methods remain impractical for expensive simulations with more than a handful of inputs. At its heart, MCMC searches the space of inputs for corresponding outputs that match measurements, and so it is afflicted with the curse of dimensionality. Additionally, MCMC methods become less efficient as the volume of the measurement data increases, particularly if the measurements are redundant. To make MCMC—and Bayesian methods, in general—amenable to today’s computer models with millions of inputs and terabytes of measurement data, one must devise methods to reduce the dimension of both the simulation inputs and the measurements. For many models used in practice, the outputs vary primarily on a low-dimensional manifold of the nominally high-dimensional input space. Recently developed active subspace methods discover this low-dimensional manifold and exploit it to enable analyses typically suited for low-dimensional settings (e.g., statistical inversion of complex systems). We hypothesize that active subspace methods can provide the necessary dimension reduction, enabling existing Bayesian methods to find solutions for a large class of otherwise intractable statistical inverse problems. We will test the hypothesis with a series of mathematical analyses and computational experiments that will proceed along three research veins: (i) integrating active subspace methods into methods for statistical inversion, (ii) addressing current challenges in active subspace methods, and (iii) incorporating methods for nonlinear dimensionality reduction into active subspace methods. We will apply the methods we develop to real inverse problems in chemical kinetics and turbulent flame modeling. Our team combines expertise in methods for inverse problems, dimension reduction, and reduced order modeling. With a history of active collaboration and thoughtful engagement, we bring enthusiasm and fresh perspectives to a well studied subject. We are excited by the potential opportunity to work together to extend and apply active subspace methods to data-intensive inverse problems.

97 MATHEMATICS AND COMPUTING↗

Active Subspace Methods for Data-Intensive Inverse Problems

Fostered by advances in computing, simulation and data science have emerged as the third and fourth paradigms enabling scientific discovery. Many mathematical challenges arise when integrating these paradigms to produce new knowledge. One of the most important challenges is the inverse or calibration problem: find the inputs of a simulation such that its outputs agree with a given set of measurements. As both the cost of the complex simulations and the volume of measurement data sets increase, intuition-driven trial-and-error methods for calibration quickly become untenable; modern scientists need more computationally efficient and mathematically rigorous methods. When measurements and simulated predictions contain uncertainty, the Bayesian perspective on statistical inference provides a popular mathematical framework for developing computational methods to solve inverse problems. Markov chain Monte Carlo (MCMC) methods are a mainstay of this framework; they characterize a probability distribution on the space of model inputs that is conditioned on the given measurements. However, despite recent advances, MCMC methods remain impractical for expensive simulations with more than a handful of inputs. At its heart, MCMC searches the space of inputs for corresponding outputs that match measurements, and so it is afflicted with the curse of dimensionality. Additionally, MCMC methods become less efficient as the volume of the measurement data increases, particularly if the measurements are redundant. To make MCMC—and Bayesian methods, in general—amenable to today’s computer models with millions of inputs and terabytes of measurement data, one must devise methods to reduce the dimension of both the simulation inputs and the measurements. For many models used in practice, the outputs vary primarily on a low-dimensional manifold of the nominally high-dimensional input space. Recently developed active subspace methods discover this low-dimensional manifold and exploit it to enable analyses typically suited for low-dimensional settings (e.g., statistical inversion of complex systems). We hypothesize that active subspace methods can provide the necessary dimension reduction, enabling existing Bayesian methods to find solutions for a large class of otherwise intractable statistical inverse problems. We will test the hypothesis with a series of mathematical analyses and computational experiments that will proceed along three research veins: (i) integrating active subspace methods into methods for statistical inversion, (ii) addressing current challenges in active subspace methods, and (iii) incorporating methods for nonlinear dimensionality reduction into active subspace methods. We will apply the methods we develop to real inverse problems in chemical kinetics and turbulent flame modeling. Our team combines expertise in methods for inverse problems, dimension reduction, and reduced order modeling. With a history of active collaboration and thoughtful engagement, we bring enthusiasm and fresh perspectives to a well studied subject. We are excited by the potential opportunity to work together to extend and apply active subspace methods to data-intensive inverse problems.

97 MATHEMATICS AND COMPUTING↗

Accelerated Test Methods

Neural network systems were evaluated for use in predicting wear of mechanical systems. Three different neural network software simulation packages were utilized in order to create models of tribological wear tests. Representative simple, medium, and high complexity simulation packages were selected. Pin-on-disk, rub shoe, and four-ball tribological test data was used for training, testing, and verification of the neural network models. Results showed mixed success. The neural networks were able to predict results with some accuracy if the number of input variables was low or the amount of training data was high. Increased neural network complexity resulted in more accurate results, however there was a point of diminishing return. Medium complexity models were the best trade off between accuracy and computing time requirements. A NASA Technical Memorandum and a Society of Tribologists and Lubrication Engineers paper are being published which detail the work.

Jansen, Ralph↗

Approach for energy efficient building design during early phase of design process

Energy consumption in the building sector is about 40% of total energy consumed globally and is trending upwards, along with its contribution to greenhouse gas (GHG) emissions. Given the adverse impacts of GHG emissions, it is crucial to integrate energy efficiency into building designs. The most significant opportunities for enhancing energy performance are present during the initial phases of building design, when there is less impact of other design constraints. Various tools exist for simulating different design options and providing feedback in terms of energy consumption and comfort parameters. These simulation outputs must then be analyzed to derive design solutions. This paper presents an innovative approach that utilizes user input parameters, processes them through cloud computing, and outputs easily understandable strategies for energy-efficient building design. The methodology employs Asynchronous Distributed Task Queues (DTQ) - a more scalable and reliable alternative to conventional speedup techniques-for conducting parametric energy simulations in the cloud. The goal of this approach is to assist design teams in identifying, visualizing, and prioritizing energy-saving design strategies from a range of possible solutions for each project. Furthermore, a tool ‘eDOT’ has been developed utilizing the discussed methodology. Unlike existing tools, eDOT leverages artificial intelligence to dynamically generate and provide design strategies during the early phases of design process. By simplifying the simulation process, eDOT enables design teams to make informed, data-driven decisions without needing to interpret complex simulation outputs. A case study simulated for two locations is provided in this paper to demonstrate the effectiveness of eDOT, further underscoring its practical impact on energy-efficient building design.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗