SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Computer program generates the stiffness matrix for a particular type of structure from geometrical data, and performs static and normal mode analyses. It requires the structure to be modeled as a stable framework of uniform, weightless members, and joints at which loads are applied and weights are lumped.
Computer program based on an equation for the velocity gradient along an arbitrary quasi- orthogonal analyzes flow through a turbomachine. The program obtains meridional solutions for a hub-to-shroud analysis and blade-to-blade analysis at the hub, mean, and shroud surfaces in a single computer run.
Computer program simulates specific bulkhead fittings by subjecting the desired geometry configuration to a membrane force, an external force, an external moment, an external tank pressure, or any combination of the above. This program generates a general model of bulkhead fittings for the Saturn booster.
Computer programs perform statistical spectral analyses of up to seven time series. These programs should have applicability to a variety of engineering systems in the fields of geophysics, physiology, acoustics, and structural analysis.
Milestones in the development of computational aerodynamics are reviewed together with past, present, and future computer performance (speed and memory) trends. Factors influencing computer performance requirements for both steady and unsteady flow simulations are identified. Estimates of computer speed and memory that are required to calculate both inviscid and viscous, steady and unsteady flows about airfoils, wings, and simple wing body configurations are presented and compared to computer performance which is either currently available, or is expected to be available before the end of this decade. Finally, estimates of the amounts of computer time that are required to determine flutter boundaries of airfoils and wings at transonic Mach numbers are presented and discussed.
Milestones in the development of computational aerodynamics are reviewed together with past, present, and future computer performance (speed and memory) trends. Factors influencing computer performance requirements for both steady and unsteady flow simulations are identified. Estimates of computer speed and memory that are required to calculate both inviscid and viscous, steady and unsteady flows about airfoils, wings, and simple wing body configurations are presented and compared to computer performance which is either currently available, or is expected to be available before the end of this decade. Finally, estimates of the amounts of computer time that are required to determine flutter boundaries of airfoils and wings at transonic Mach numbers are presented and discussed.
Space radiator-condenser design and performance analysis computer programs - users manual
Computer acquired performance map of etched-rhenium, niobium planar diode
Computer processed performance data for thermionic converter with etched rhenium emitter and niobium collector
Computer acquired performance mapping of fixed spaced planar diode with etched Re emitter and Nb collector over wide operating temperature range
SHABERTH computer program developed to predict steady-state and transient thermal performance of multi-bearing shaft system operating with either wet or dry friction. Calculates loads, torques, temperatures, and fatigue lives for ball and/or roller bearings on single shaft. Enables study of many causes of instabilities in bearings. Also provides for analysis of reaction of system to termination of supply of lubricant to bearings and other lubricated mechanical elements. Valuable software tool in design and analysis of shaft bearing systems. Written in FORTRAN IV.
Computer acquired performance data from physically vapor deposited tungsten-niobium thermoinic converter
A guidance, navigation, and control system, the Simulated Shuttle Flight Test System (SS-FTS), when interfaced with existing aircraft systems, provides a research facility for studying concepts for landing the space shuttle orbiter and conventional jet aircraft. The SS-FTS, which includes a general-purpose computer, performs all computations for precisely following a prescribed approach trajectory while properly managing the vehicle energy to allow safe arrival at the runway and landing within prescribed dispersions. The system contains hardware and software provisions for navigation with several combinations of possible navigation aids that have been suggested for the shuttle. The SS-FTS can be reconfigured to study different guidance and navigation concepts by changing only the computer software, and adapted to receive different radio navigation information through minimum hardware changes. All control laws, logic, and mode interlocks reside solely in the computer software.
Conference poster using previously disclosed techniques and methods (see ARC 16210 & 16212). We present simulations of grid-fin control surfaces to demonstrate geometric complexity and numerical robustness. These results have relevance to high-performance computing and performance of grid-fin-based control systems.
The Computational Aerosciences (CAS) Project is part of NASA's High Performance Computing and Communications Program. Its primary goal is to accelerate the availability of high-performance computing technology to the US aerospace community-thus providing the US aerospace community with key tools necessary to reduce design cycle times and increase fidelity in order to improve safety, efficiency and capability of future aerospace vehicles. A complementary goal is to hasten the emergence of a viable commercial market within the aerospace community for the advantage of the domestic computer hardware and software industry. The CAS Project selects representative aerospace problems (especially design) and uses them to focus efforts on advancing aerospace algorithms and applications, systems software, and computing machinery to demonstrate vast improvements in system performance and capability over the life of the program. Recent demonstrations have served to assess the benefits of possible performance improvements while reducing the risk of adopting high-performance computing technology. This talk will discuss past accomplishments in providing technology to the aerospace community, present efforts, and future goals. For example, the times to do full combustor and compressor simulations (of aircraft engines) have been reduced by factors of 320:1 and 400:1 respectively. While this has enabled new capabilities in engine simulation, the goal of an overnight, dynamic, multi-disciplinary, 3-dimensional simulation of an aircraft engine is still years away and will require new generations of high-end technology.
Computer program plots flight test data /stored on magnetic tape during the flight/ with comparative data from other tapes /design and post-flight predictions/. Information as to which measurements are on each tape, the order in which they appear, and the exact time span is supplied by the source of the data.
The design of interactive systems, including levels of automation, displays, and controls, is usually based on design guidelines and iterative empirical prototyping. A complementary approach is to use computational human performance models to evaluate designs. An integrated strategy of model-based and empirical test and evaluation activities is particularly attractive as a methodology for verification and validation of human-rated systems for commercial space. This talk will review several computational human performance modeling approaches and their applicability to design of display and control requirements.
This publication is a collection of extended abstracts of presentations given at the HPCCP/CAS (High Performance Computing and Communications Program/Computational Aerosciences Project) Workshop held on August 24-26, 1998, at NASA Ames Research Center, Moffett Field, California. The objective of the Workshop was to bring together the aerospace high performance computing community, consisting of airframe and propulsion companies, independent software vendors, university researchers, and government scientists and engineers. The Workshop was sponsored by the HPCCP Office at NASA Ames Research Center. The Workshop consisted of over 40 presentations, including an overview of NASA's High Performance Computing and Communications Program and the Computational Aerosciences Project; ten sessions of papers representative of the high performance computing research conducted within the Program by the aerospace industry, academia, NASA, and other government laboratories; two panel sessions; and a special presentation by Mr. James Bailey.