Search NASA⌕ Search

SEARCH · Search NASA

Results for “concentrations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Porous Nanomaterials for Ultrabroadband Omnidirectional Anti‐Reflection Surfaces with Applications in High Concentration Photovoltaics

Materials for nanoporous coatings that exploit optimized chemistries and self‐assembly processes offer capabilities to reach ≈98% transmission efficiency and negligible scattering losses over the broad wavelength range of the solar spectrum from 350 nm to 1.5 µm, on both flat and curved glass substrates. These nanomaterial anti‐reflection coatings also offer wide acceptance angles, up to ±40°, for both s‐ and p‐polarization states of incident light. Carefully controlled bilayer films have allowed for the fabrication of dual‐sided, gradient index profiles on plano‐convex lens elements. In concentration photovoltaics platforms, the resultant enhancements in the photovoltaics efficiencies are ≈8%, as defined by experimental measurements on systems that use microscale triple‐junction solar cells. These materials and their applications in technologies that require control over interface reflections have the potential for broad utility in imaging systems, photolithography, light‐emitting diodes, and display technologies.

Yao, Yuan↗

Quantitative concentration measurements in a turbulent helium jet using rainbow schlieren deflectometry

Rainbow schlieren deflectometry (RSD) is applied to acquire quantitative concentration measurements in a turbulent environment for the first time. RSD methodology is developed and validated using Rayleigh scattering data available in the literature. Experiments were performed in an initially laminar, momentum-driven helium jet injected into ambient air. Full-field measurements are acquired that span the laminar, transition, and fully turbulent regions of the jet. Furthermore, the RSD results are shown to provide accurate measurements in each region and also confirm the self-similar nature of the fully turbulent jet. Analysis shows that the transition from laminar to turbulent flow occurs across an axial span that decreases with increasing Reynolds number. Experiments with a long exposure time were conducted to evaluate the limitations of hardware averaging of the RSD signal in comparison with software averaging.

02 PETROLEUM↗

Enhancement of a Process Flowsheet for Recovering and Concentrating Critical Materials from Bituminous Coal Sources

Recovery of rare earth elements (REE) from coal-related resources has recently received significant interest due to supply concerns and their key roles in critical industries and defense-related technologies. In this study, an integrated flowsheet consisting of sorting, crushing/grinding, physical separation, acid leaching, solvent extraction, and selective precipitation was designed to achieve continuous production of rare earth products from various coal-related resources such as coarse refuse and acid mine drainage. A pilot plant was constructed that enabled continuous testing of the circuitry on a range of different coal-based feedstocks. Despite achieving significant success in producing high-grade rare earth oxide products, low REE recovery values and high operational costs necessitated a re-evaluation of the process flowsheet. This article describes the circuitry improvements that were based on both laboratory and pilot plant test results. Roasting as a pre-leach treatment was found to significantly improve the leaching rate and overall REE recovery values. After roasting West Kentucky No. 13 and Fire Clay coal refuse materials at 600 °C, REE recovery increased by 60 and 40 absolute percentage points, respectively. Rare earth concentration in the pregnant leachate solution (PLS) was increased to around 700 ppm prior to solvent extraction using a staged precipitation method. REEs in the precipitate were re-dissolved, purified, and extracted from the PLS using solvent extraction and selective precipitation to values of around 80%. As a result of the improvements, chemical consumption in the acid leaching and solvent extraction processes was significantly reduced. A techno-economical assessment of the improved flowsheet indicated significant commercialization potential.

01 COAL, LIGNITE, AND PEAT↗

Data-driven probability concentration and sampling on manifold

A new methodology is proposed for generating realizations of a random vector with values in a finite-dimensional Euclidean space that are statistically consistent with a dataset of observations of this vector. The probability distribution of this random vector, while a priori not known, is presumed to be concentrated on an unknown subset of the Euclidean space. A random matrix is introduced whose columns are independent copies of the random vector and for which the number of columns is the number of data points in the dataset. The approach is based on the use of (i) the multidimensional kernel-density estimation method for estimating the probability distribution of the random matrix, (ii) a MCMC method for generating realizations for the random matrix, (iii) the diffusion-maps approach for discovering and characterizing the geometry and the structure of the dataset, and (iv) a reduced-order representation of the random matrix, which is constructed using the diffusion-maps vectors associated with the first eigenvalues of the transition matrix relative to the given dataset. The convergence aspects of the proposed methodology are analyzed and a numerical validation is explored through three applications of increasing complexity. The proposed method is found to be robust to noise levels and data complexity as well as to the intrinsic dimension of data and the size of experimental datasets. Both the methodology and the underlying mathematical framework presented in this paper contribute new capabilities and perspectives at the interface of uncertainty quantification, statistical data analysis, stochastic modeling and associated statistical inverse problems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Use of Encapsulated Zinc Particles in a Eutectic Chloride Salt to Enhance Thermal Energy Storage Capacity for Concentrated Solar Power

Concentrated Solar Power (CSP) is considered as a viable large-scale renewable energy source to produce electricity. However, current costs to produce electricity from CSP are not cost competitive as compared to the traditional energy generation technologies based on fossil fuels and nuclear. It is envisioned that development of high efficiency and high heat capacity thermal storage fluids will increase system efficiency, reduce structural storage volume, and hence, contribute to reducing costs. Particularly, with respect to CSP, current high temperature energy storage fluids, such as molten salts, are relatively limited in terms of their thermal energy storage capacity and thermal conductivity. The current work explores possibility of boosting the thermal storage capacity of molten salts through latent heat of added phase change materials. We studied the advantage Of adding coated Zn micron-sized particles to alkali chloride salt eutectic for enhanced thermal energy storage. Zinc particles (0.6 mu m and 5 mu m) obtained from commercial source were coated with an organo-phosphorus shell to improve chemical stability and to prevent individual particles from coalescing with one another during melt/freeze cycles. Thermal cycling tests (200 melt/freeze cycles) showed that coated Zn particles have good thermal stability and are chemically inert to alkali chloride salt eutectic in both N-2 and in air atmospheres. Elemental mapping of the cross-sectional view of coated Zn particles from the composite after thermal cycles showed no signs of oxidation, agglomeration or other type of particle degradation. The measured enhancement in volumetric thermal storage capacity of the composite with just similar to 10 vol% of coated Zn particles over the base chloride salt eutectic varies from 15% to 34% depending on cycling temperature range (Delta T = 50 degrees C -100 degrees C. (C) 2015 Elsevier Ltd. All rights reserved.

encapsulation↗

Simulation of thermal hydraulic performance of multiple parallel micropin arrays for concentrating solar thermal applications with supercritical carbon dioxide

Concentrated solar power (CSP) plants have the potential to provide 24 h, renewable electricity. Current CSP systems have high capital and operational costs which makes the levelized cost of electricity uncompetitive with conventional techniques. Recent experimental research has shown the potential of small unit cells (up to 2 × 2 cm) containing micropin arrays (D H < 1 mm) to operate efficiently at high incident flux (>140 W cm -2 ) using supercritical carbon dioxide as the working fluid. Applying this technology to CSP systems would result in a smaller central receiver, which would reduce thermal losses, increase receiver efficiency and reduce the capital cost of the receiver component. This study investigates and addresses the practical thermal and hydraulic issues in numbering up these small unit cells into numerous parallel cells within an integrated module design. A thermal hydraulic network model is developed to quantify the distribution and the overall receiver efficiency of an integrated module. This model is used to specify maximum allowable unit cell size and header dimensions to maintain acceptable thermal performance and pressure loss. Once a module design was finalized, parametric studies were performed to study the effects of varying incident flux on flow distribution and thermal performance of the module. Finally, the results show that an integrated module design can be achieved with less than 5% flow maldistribution and a pressure drop acceptable to the remainder of the system.

14 SOLAR ENERGY↗

Gas Generation in Lithium Cells with High-Nickel Cathodes and Localized High-Concentration Electrolytes

High-nickel layered-oxide cathodes (LiNi x Mn y Co 1-x-y O 2 , x ≥ 0.8) exhibit high capacities, but also experience rapid capacity fade during cycling, and are susceptible to heat generation and gas release. Advanced electrolytes, such as localized high-concentration electrolytes (LHCE), substantially stabilize the cathode during cycling and have lower flammability than conventional electrolytes, but gas generation with these electrolytes is yet to be assessed. We demonstrate here that gas generation from a high-nickel cathode in an LHCE is half as much as in a conventional electrolyte at 4.4 V. The gas generation in LHCE is further reduced at 4.3 V, but the LHCE generates a similar amount of gas as the conventional electrolyte at 4.6 V. Neither electrolyte can prevent gas generation after cycling; cathodes after 200 cycles generate similar amounts of gas as pristine cathodes during high-voltage hold. Finally, it is shown that in both electrolytes, oxygen from the cathode lattice plays a critical role in gas generation.

25 ENERGY STORAGE↗

Flexible concentrator photovoltaics based on microscale silicon solar cells embedded in luminescent waveguides

Unconventional methods to exploit monocrystalline silicon and other established materials in photovoltaic (PV) systems can create new engineering opportunities, device capabilities and cost structures. Here we show a type of composite luminescent concentrator PV system that embeds large scale, interconnected arrays of microscale silicon solar cells in thin matrix layers doped with luminophores. Photons that strike cells directly generate power in the usual manner; those incident on the matrix launch wavelength-downconverted photons that reflect and waveguide into the sides and bottom surfaces of the cells to increase further their power output, by more than 300% in examples reported here. Unlike conventional luminescent photovoltaics, this unusual design can be implemented in ultrathin, mechanically bendable formats. Furthermore, detailed studies of design considerations and fabrication aspects for such devices, using both experimental and computational approaches, provide quantitative descriptions of the underlying materials science and optics.

14 SOLAR ENERGY↗

Tandem luminescent solar concentrators based on engineered quantum dots

Luminescent solar concentrators (LSCs) can serve as large-area sunlight collectors for terrestrial and space-based photovoltaics. Due to their high emission efficiencies and readily tunable emission and absorption spectra, colloidal quantum dots have emerged as a new and promising type of LSC fluorophore. Spectral tunability of the quantum dots also facilitates the realization of stacked multilayered LSCs, where enhanced performance is obtained through spectral splitting of incident sunlight, as in multijunction photovoltaics. Here, we demonstrate a large-area (>230 cm 2 ) tandem LSC based on two types of nearly reabsorption-free quantum dots spectrally tuned for optimal solar-spectrum splitting. This prototype device exhibits a high optical quantum efficiency of 6.4% for sunlight illumination and solar-to-electrical power conversion efficiency of 3.1%. In conclusion, the efficiency gains due to the tandem architecture over single-layer devices quickly increase with increasing LSC size and can reach more than 100% in structures with window sizes of more than 2,500 cm 2 .

14 SOLAR ENERGY↗

Superior thermoelectric performance in PbTe-PbS pseudo-binary. Extremely low thermal conductivity and modulated carrier concentration

Lead chalcogenides have exhibited their irreplaceable role as thermoelectric materials at the medium temperature range, owing to highly degenerate electronic bands and intrinsically low thermal conductivities. PbTe-PbS pseudo-binary has been paid extensive attentions due to the even lower thermal conductivity which originates largely from the coexistence of both alloying and phase-separated precipitations. To investigate the competition between alloying and phase separation and its pronounced effect on the thermoelectric performance in PbTe-PbS, we systematically studied Spark Plasma Sintered (SPSed), 3 at% Na- doped (PbTe) 1-x (PbS)x samples with x=10%, 15%, 20%, 25%, 30% and 35% by means of transmission electron microscopy (TEM) observations and theoretical calculations. Corresponding to the lowest lattice thermal conductivity as a result of the balance between point defect- and precipitates- scattering, the highest figure of merit ZT~2.3 was obtained at 923 K when PbS phase fraction x is at 20%. The consistently lower lattice thermal conductivities in SPSed samples compared with corresponding ingots, resulting from the powdering and follow-up consolidation processes, also contribute to the observed superior ZT. Notably, the onset of carrier concentration modulation ~600 K due to excessive Na’s diffusion and re-dissolution leads to the observed saturations of electrical transport properties, which is believed equally crucial to the outstanding thermoelectric performance of SPSed PbTe-PbS samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Concentration Dependent Interfacial Chemistry of the NaOH(aq):Gibbsite Interface

Caustic conditions are often employed for dissolution of a wide variety of minerals, where ion sorption, surface diffusion, and interfacial organization impact surface reactivity. In the case of gibbsite, gamma-Al(OH)3, the chemistry at the NaOH(aq) interface is deeply intertwined with industrial processing of aluminum, including metal production and the disposition of Al-containing wastes. To date, little is known about the structure, speciation, and dynamic behavior of gibbsite interfaces (and that of many other minerals) with NaOH(aq)—particularly as a function of ionic strength. Yet concentration-dependent interfacial organization and dynamics are a critical starting point to develop a fundamental understanding of the factors that influence dissolution. This work reports equilibrium molecular dynamics simulations of the gamma-Al(OH)3:NaOH(aq) interface, revealing the sorption behavior and speciation of ions from 0.5–10 M [NaOH]. As inner-sphere complexes, Na+ primarily coordinates to the side of the gibbsite hexagonal cavities, while OH accepts hydrogen-bonding from the surface-OH groups. The mobility of inner-sphere Na+ and OH ions is significantly reduced due to a strong surface affinity in comparison to previous reports of NaCl, CaCl2, or BaCl2 electrolytes. At high [NaOH], contact ion pairing that is observed in the bulk solution is partially disrupted upon sorption to the gibbsite surface by the individual ion–surface interactions. The molecular-scale changes to surface speciation and competition between ion–surface vs. ion–ion interactions influence surface characterization of gibbsite and potential dissolution processes, providing a valuable baseline for starting conditions needed within future reactive molecular simulations.

alkaline solutions, IDREAM, gibbsite, molecular dy↗

Linking local structure and properties in perovskites containing equal concentrations of manganese and ruthenium

The local structures of six perovskite compounds containing equal amounts of manganese and ruthenium on the B-site have been investigated by neutron and x-ray pair distribution function analysis. The compounds SrMn{sub 0.5}Ru{sub 0.5}O{sub 3}, Sr{sub 0.5}Ca{sub 0.5}Mn{sub 0.5}Ru{sub 0.5}O{sub 3}, and CaMn{sub 0.5}Ru{sub 0.5}O{sub 3} were studied to investigate the effects of pure chemical pressure on the local structure and valency ratio between Mn{sup 3+}/Ru{sup 5+} and Mn{sup 4+}/Ru{sup 4+}. Reverse Monte Carlo simulations confirm that there is a shift in the B-site cation charge distribution from nearly equal amounts of Mn{sup 3+}, Ru{sup 5+}, Mn{sup 4+}, and Ru{sup 4+} for SrMn{sub 0.5}Ru{sub 0.5}O{sub 3} to primarily Mn{sup 4+} and Ru{sup 4+} for CaMn{sub 0.5}Ru{sub 0.5}O{sub 3}. The compounds Ba{sub 0.5}La{sub 0.5}Mn{sub 0.5}Ru{sub 0.5}O{sub 3}, Ca{sub 0.5}La{sub 0.5}Mn{sub 0.5}Ru{sub 0.5}O{sub 3}, and Sr{sub 0.5}Ca{sub 0.25}La{sub 0.25}Mn{sub 0.5}Ru{sub 0.5}O{sub 3} were also investigated to study the effects of changing the charge of the A-site cation. Although substitution of La{sup 3+} for a divalent alkaline earth ion increases the Mn{sup 3+} content, this series of compounds also shows a relative increase in the concentration of Mn{sup 4+} as the average size of the A-site cation is decreased. In all compounds the octahedra containing Mn{sup 3+} are found to be Jahn-Teller distorted regardless of whether or not long-range orbital ordering is observed, while the Ru-centered octahedra are symmetric. No evidence for short-range cation ordering at either the A- or B-sites was found for any of the compositions. This study also reports that locally the A-site cations lie closer to the Mn ions than to the Ru ions and this asymmetry appears to be correlated to the degree of octahedral tilting.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗