Search NASA⌕ Search

SEARCH · Search NASA

Results for “conical shocks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Internal Designs Application for Inlet and Nozzle Aeroperformance Improvement

The following research results are based on development of an approach previously proposed by the authors for optimum nozzle design to obtain maximum thrust. The design was denoted a Telescope nozzle. A Telescope nozzle contains one or several internal designs of certain location, which are inserted at certain locations into a divergent conical or planar main nozzle near its exit. Such a design provides additional thrust augmentation over 20% by comparison with the optimum single nozzle of equivalent lateral area. What is more, recent experimental acoustic tests have discovered an essential noise reduction due to Telescope nozzles application. In this paper, some additional theoretical results are presented for Telescope nozzles and a similar approach is applied for aeroperformance improvement of a supersonic inlet. In addition, a classic gas dynamics problem of a similar supersonic flow into a plate has been analyzed. In some particular cases, new exact analytical solutions are obtained for a flow into a wedge with an oblique shock wave. Numerical simulations were conducted for supersonic flow into a divergent portion of a 2D or axisymmetric nozzle with several plane or conical designs as well as into a 2D or axisymmetric supersonic inlet with a forebody. The 1st order Kryko-Godunov march- ing numerical scheme for inviscid supersonic flows was used. Several cases were tested using the NASA CFL3d code based on full Navier-Stokes equations. Numerical simulation results have confirmed essential benefits of Telescope design applications in propulsion systems.

Gilinsky, M.↗
NASA NTRS1976

Wing shielding of high velocity jet and shock-associated noise with cold and hot flow jets

Jet exhaust noise shielding data are presented for cold and hot flows (ambient to 1,100 K) and pressure ratios from 1.7 to 2.75. A nominal 9.5-cm diameter conical nozzle was used with simple shielding surfaces that were varied in length from 28.8 to 114.3 cm. The nozzle was located 8.8 cm above the surfaces. The acoustic data with the various sheilding lengths are compared to each other and to that for the nozzle alone. In general, short shielding surfaces that provided shielding for subsonic jets did not provide as much shielding for jets with shock noise, however, long shielding surfaces did shield shock noise effectively.

Vonglahn, U.↗
NASA NTRS1980

A unique coannular plug nozzle jet noise prediction procedure

The work presents a method for predicting jet mixing and shock noise spectra from coannular plug nozzles operated in the inverted velocity profile mode. It is shown that the jet mixing noise prediction method is based on the physics of the flow and its noise radiating characteristics, modeling the source spectrum, eddy convection, and fluid shrouding in a simplistic fashion. Further, the shock noise prediction procedure is described, noting that it is an extension of the Fisher-Harper-Bourne method for conical nozzles. Finally, it is concluded that the method has the potential of being extended to suppressors of complex geometries.

Bhutiani, P. K.↗
NASA NTRS1986

Plasma processes driven by current sheets and their relevance to the auroral plasma

Plasma processes dealing with ac and dc electric fields, the formation of ion beams and conics, and electron acceleration are considered, and similarities between simulation results and satellite-based observations are discussed. Electrostatic shock-type electric fields are found to occur near the current sheet edges, and double layers having upward electric fields form inside the sheet and are distinguishable from the large perpendicular electric fields only in wide sheets with thicknesses much greater than the ion Larmor radius. It is found that the most energetic ions have pitch angles near 90 deg, indicating a large perpendicular acceleration of the ions, and that the downward accelerating electrons inside the sheet are neither monoenergetic nor perfectly field aligned.

Singh, Nagendra↗
NASA NTRS2012

Lunar Precursor Effects in the Solar Wind and Terrestrial Magnetosphere

The two ARTEMIS probes observe significant precursor activity upstream from the Moon, when magnetically connected to the dayside lunar surface. The most common signature consists of high levels of whistler wave activity near half of the electron cyclotron frequency. This precursor activity extends to distances of many thousands of km, in both the solar wind and terrestrial magnetosphere. In the magnetosphere, electrons reflect from a combination of magnetic and electrostatic fields above the lunar surface, forming loss cone distributions. In the solar wind they generally form conics, as a result of reflection from an obstacle moving with respect to the plasma frame (just as at a shock). The anisotropy associated with these reflected electrons provides the free energy source for the whistlers, with cyclotron resonance conditions met between the reflected source population and Moonward-propagating waves. These waves can in turn affect incoming plasma, and we observe significant perpendicular electron heating and plasma density depletions in some cases. In the magnetosphere, we also observe broadband electrostatic modes driven by beams of secondary electrons and/or photoelectrons accelerated outward from the surface. We also occasionally see waves near the ion cyclotron frequency in the magnetosphere. These lower frequency waves, which may result from the presence of ions of lunar origin, modulate the whistlers described above, as well as the electrons. Taken together, our observations suggest that the presence of the Moon leads to the formation of an upstream region analogous in many ways to the terrestrial electron foreshock.

Magnetosphere↗
NASA NTRS1977

Supersonic flow about circular cones at large angles of attack - A floating discontinuity approach

The technique of floating shock fitting is adapted to the computation of the inviscid flowfield about circular cones in a supersonic free stream at angles of attack that exceed the cone half-angle. In those regions in which the governing conical equations are mixed elliptic-hyperbolic, the fully hyperbolic form is obtained by the addition of the temporal derivative. The resulting equations are applicable over the complete range of free-stream Mach numbers, angles of attack and cone half-angles for which the bow shock is attached. An explicit finite-difference algorithm is used to obtain the solution by an unsteady relaxation approach. The bow shock, embedded crossflow shock, and vortical singularity in the leeward symmetry plane are all treated as floating discontinuities in a fixed computational mesh. The method yields excellent results for the bow and embedded shocks, however, the solution in the leeward symmetry plane exhibits viscous-like effects and does not appear to adequately predict the behavior of the vortical singularity.

Daywitt, J.↗
NASA NTRS1985

Computation of three-dimensional shock-wave/turbulent boundary-layer interaction flows

Solutions of the Reynolds-averaged Navier-Stokes equations, employing a two-equation turbulence model, are presented and compared with measurements from a series of supersonic shock-wave/boundary-layer interaction experiments. The test flows include swept-compression corners and axisymmetric bodies with either skewed or segmented conical flares. The solutions correctly predict all major qualitative features of the flow field. However, for flow fields with large separated zones, significant quantitative differences are observed between the computed and experimental results. Possible reasons for these differences are discussed.

Horstman, C. C.↗
NASA NTRS1988

Particle acceleration and wave emissions associated with the formation of auroral cavities and enhancements

A unified model is presented which interrelates the various processes involved in auroral particle acceleration and the associated wave emissions, and it is shown how energy is coupled from the magnetosphere into the ionosphere. The phenomena in the magnetotail which can provide the source of free energy for the perpendicular electrostatic shocks are identified along with the associated potential structures in the nightside auroral region. The characteristics of the particle acceleration produced by the shock are described, including efficiency and energy transport between magnetospheric and ionospheric plasmas, the properties of the particle distributions throughout the shock region and return current regions, and the associated wave emissions. The source of free energy for the generation of ion conics is identified, as are the signatures for the formation of plasma cavities and/or enhancements.

Winglee, R. M.↗
NASA NTRS1987

An aerothermodynamic study of slender conical vehicles

A numerical study was performed to assess the applicability of some current techniques which can be used for aerothermal predictions over slender spherically blunted cones. Predictions using a viscous-shock-layer method and several engineering approaches were compared with experimental results from flight and ground-based tests, with each other, and with other detailed results. Good agreement was obtained in comparisons with laminar and turbulent heating data from the Reentry F flight vehicle and with the wind-tunnel data. In particular, the viscous-shock-layer method was shown to yield excellent comparisons and should be useful in providing detailed flowfield and surface values for slender blunted cones. Additional predictions were obtained with these methods for two 5-deg half-angle cones with different nose radii to illustrate the effects of nose bluntness and angle of attack on drag and heat transfer. These results demonstrate the benefit of nose blunting with respect to heating and drag for laminar and transitional flow at zero-lift conditions and the benefit of heating reduction at angle of attack. Detailed comparison of the engineering code predictions with the viscous-shock-layer results for these additional cases generally showed good agreement except for the laminar prodictions at angle of attack on the forward cone surface. Nonequilibrium calculations at 0-deg angle of attack showed that substantial benefits of low surface catalysis existed only in the nose-dominated region.

Thompson, R. A.↗
NASA NTRS1988

Solutions for hypersonic viscous flow over delta wings

A conical Navier-Stokes solver is developed to study hypersonic flow over delta wings. The differencing scheme used is van Leer flux vector splitting with MUSCL differencing. A flux limiter which involves a second difference in pressure was found to provide sharp, nonoscillatory shocks in windward and leeward flow regions. The governing equations are cast in finite-volume form and are solved using an explicit multistage method. A von Neumann stability analysis of a one-dimensional flux split model is used to predict the stability characteristics of the conical solver. The stability behavior of the scheme is found to strongly depend on the stage coefficients of the multistage scheme and on the order of accuracy of the upwind discretization.

Ruffin, Stephen M.↗
NASA NTRS1987

A radiative bow shock wave (?) driven by nuclear ejecta in a Seyfert galaxy

New VLA maps at 2 cm of the 13-arcsec-scale linear radio source in the center of NGC 1068 are described. The northeast lobe shows a limb-brightened conical morphology, very sharp 'leading' edges, and a magnetic field running parallel to these edges. The spectral index between 2 and 6 cm in these line-brightened regions is near 1.0. The northeast subpeak has a very steep radio spectrum between 18 and 2 cm which is attributed to inverse Compton losses of the relativistic electrons on the infrared photons. The spectral indices in the southwest lobe lie in the range 0.9-1.5 except in its northern parts, where a much larger index is found. The northeast lobe radio emission could arise in either the cocoon of old jet material which has passed through the internal shock in the ejecta and blown out to either side, or in interstellar material compressed by a bow shock wave driven into the galactic ISM.

Wilson, Andrew S.↗
NASA NTRS1994

Skin-Friction Measurements in a 3-D, Supersonic Shock-Wave/Boundary-Layer Interaction

The experimental documentation of a three-dimensional shock-wave/boundary-layer interaction in a nominal Mach 3 cylinder, aligned with the free-stream flow, and 20 deg. half-angle conical flare offset 1.27 cm from the cylinder centerline. Surface oil flow, laser light sheet illumination, and schlieren were used to document the flow topology. The data includes surface-pressure and skin-friction measurements. A laser interferometric skin friction data. Included in the skin-friction data are measurements within separated regions and three-dimensional measurements in highly-swept regions. The skin-friction data will be particularly valuable in turbulence modeling and computational fluid dynamics validation.

Wideman, J. K.↗
NASA NTRS1983

SC3 - A wing concept for supersonic maneuvering

A supersonic wing design concept that overcomes the problems associated with nonlinear inviscid pressure distribution is presented together with a summary of the supporting theoretical and experimental development program. The key design feature is a conical panel supporting a controlled supercritical conical camber (SC3) crossflow expansion and recompression which permits lift on the upper surface to be obtained without producing an adverse pressure gradient or crossflow shock wave strong enough to separate the boundary layer. The role of aerodynamics in the design implementation is discussed, as are the concept development, the initial design validation on a fabricated and tested SC3 design, and the body and canard interaction effect. The design and testing of an isolated wing with a planform and thickness distribution representative of a practical application are described. Wind-tunnel results show that significant performance gains can be obtained for fighter aircraft using this concept.

Mason, W. H.↗
NASA NTRS1984

A computational study of complex three-dimensional compressible turbulent flow fields

Solutions of the time dependent, Reynolds-averaged, Navier-Stokes equations are presented and are compared with a family of experimental results for the three-dimensional interaction of a shock wave with a turbulent boundary layer. The solutions correctly predict the major features of the flow field independent of the shock strength and the extent of separation when using a two-equation turbulence model with wall functions. The experimentally observed boundary between cylindrical and conical flow regimes is also predicted. However, for the flow fields with large separated zones, the details of the measured pressure distributions are not accurately computed, which indicates a need for improved turbulence modeling and/or grid resolution.

Horstman, C. C.↗
NASA NTRS1985

Free-jet investigation of mechanically suppressed, high radius ratio coannular plug model nozzles

The experimental and analytical acoustic results of a scale-model investigation or unsuppressed and mechanically suppressed high-radius ratio coannular plug nozzles with inverted velocity and temperature profiles are summarized. Nine coannular nozzle configurations along with a reference conical nozzle were evaluated in the Anechoic Free-Jet Facility for a total of 212 acoustic test points. Most of the tests were conducted at variable cycle engine conditions applicable to advanced high speed aircraft. The tested nozzles included coannular plug nozzles with both convergent and convergent-divergent (C-D) terminations in order to evaluate C-D effectiveness in the reduction of shock-cell noise and 20 and 40 shallow-chute mechanical suppressors in the outer stream in order to evaluate their effectiveness in the reduction of jet noise. In addition to the acoustic tests, mean and turbulent velocity measurements were made on selected plumes of the 20 shallow-chute configuration using a laser velocimeter. At a mixed jet velocity of 700 m/sec, the 20 shallow-chute suppressor configuration yielded peak aft quadrant suppression of 11.5 and 9 PNdB and forward quadrant suppression of 7 and 6 PNdB relative to a baseline conical nozzles during static and simulated flight, respectively. The C-D terminations were observed to reduce shock-cell noise. An engineering spectral prediction method was formulated for mechanically suppressed coannular plug nozzles.

Janardan, B. A.↗
NASA NTRS1960

Landing-Impact Characteristics of Load-Alleviating Struts on a Model of a Winged Space Vehicle

A brief experimental investigation was made of the landing-impact characteristics of a 1/9-scale dynamic model of a winged space vehicle. The landing tests were made by catapulting a free model onto a hard; surface runway and onto water. The model had a conical fuselage and a flat - plate wing with a basic delta planform and 75 deg sweepback of the leading edge. The use of yielding-metal shock absorbers and various landing-gear arrangements was investigated during landing impact. The basic landing gear consisted of a dual rubber-tired nose wheel and twin main skids aft of the center of gravity near the wing tips. landing motion and acceleration data were obtained over a range of landing attitudes, gross weights, and initial sinking speeds. Brief tests were made with an alternate nose-wheel location. An all-skid configuration also was briefly evaluated for hard-surface and water landings. The landing gear employing yielding struts for impact-energy absorption during hard-surface landings resulted in accelerations of approximately 5 1/2 g near the nose gear over a range of landing parameters. Replacing the nose wheel and tire with a skid did not significantly change the accelerations. Landings in smooth water with rigid struts and adequate planing area at the nose skid resulted in a maximum landing acceleration of approximately 4g.

Blanchard, Ulysse J.↗
NASA NTRS2016

Passive Rocket Diffuser Theory: A Re-Examination of Minimum Second Throat Size

Second-throat diffusers serve to isolate rocket engines from the effects of ambient back pressure during testing without using active control systems. Among the most critical design parameters is the relative area of the diffuser throat to that of the nozzle throat. A smaller second throat is generally desirable because it decreases the stagnation-to-ambient pressure ratio the diffuser requires for nominal operation. There is a limit, however. Below a certain size, the second throat can cause pressure buildup within the diffuser and prevent it from reaching the start condition that protects the nozzle from side-load damage. This paper presents a method for improved estimation of the minimum second throat area which enables diffuser start. The new 3-zone model uses traditional quasi-one-dimensional compressible flow theory to approximate the structure of two distinct diffuser flow fields observed in Computational Fluid Dynamics (CFD) simulations and combines them to provide a less-conservative estimate of the second throat size limit. It is unique among second throat sizing methods in that it accounts for all major conical nozzle and second throat diffuser design parameters within its limits of application. The performance of the 3-zone method is compared to the historical normal shock and force balance methods, and verified against a large number of CFD simulations at specific heat ratios of 1.4 and 1.25. Validation is left as future work, and the model is currently intended to function only as a first-order design tool.

Jones, Daniel R.↗