Search NASA⌕ Search

SEARCH · Search NASA

Results for “control surfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1936

Reduction of hinge moments of airplane control surfaces by tabs

This report presents the results of an investigation conducted in the NACA 7 by 10-foot wind tunnel of control surfaces equipped with tabs for reducing the control forces or trimming the aircraft. Two sizes of ordinary ailerons with several sizes of attached and inset tabs were tested on a Clark y wing. Tabs were also tested in combination with auxiliary balances of the horn and paddle types, and with a frise balance aileron. A tail-surface model of symmetrical section, equipped with tabs, was tested with 40 percent of the area movable (elevator) when used as a horizontal tail and 60 percent of the area movable (rudder) when used as a vertical tail. The half-span tail-surface model was tested with and without a reflection plane. The results of the tests indicated that inset tabs were superior to attached tabs for the same ratio of tab/control surface deflection.

Harris, Thomas A↗
NASA NTRS1973

A low speed wind tunnel test of the 0.050 scale NASA-JSC shuttle orbiter 089B to determine the longitudinal and lateral directional effects of control surface modifications

Wind tunnel tests to determine the longitudinal and lateral-directional effects of control surface modifications on the space shuttle orbiter aerodynamic characteristics are discussed. A total of 103 data runs were made which consisted of pitch runs through a range of zero to 28 degrees at a zero yaw angle and yaw runs from minus 6 to plus 6 degrees at various fixed pitch angles. At each data point, data from an internal strain gage balance was sampled with the digital data system. Also recorded were the model angles of pitch and yaw and the test section static pressure. Results are presented in the form of tabulated aerodynamic coefficient data about the model reference center.

Oldenbuttel, R. H.↗
NASA NTRS1923

An Instrument for Recording the Position of Airplane Control Surfaces

N.A.C.A. has developed an instrument which makes a continuous record of the angular position of the control surfaces of an airplane, not only in steady flight but during acrobatics as well. It has proven useful in researches into stability and controllability, and from records obtained from it many otherwise obscure details of piloting technique have been available for the instruction of pilots, from novices to seasoned experts.

AIR NAVIGATION↗
NASA NTRS1976

Determination of optimum planforms for control surfaces

A theoretical analysis is made to determine the optimum chord distribution, location, and extent of control surfaces, with the ratio of hinge moment to effectiveness as the criterion. Expressions for the effectiveness - for ailerons, the rolling moment, and for tail surfaces, the change of lift on the tail due to deflection of the surface-were derived from lifting line theory. Solutions found for a range of airfoil planforms indicate that, regardless of the characteristics of the tail surface, the chord of the rudder or the elevator should be very nearly constant over its span. The optimum ailerons are also of a characteristics shape, varying little with the planform of the wing.

Jones, R. T.↗
NASA NTRS1982

The equivalent angle-of-attack method for estimating the nonlinear aerodynamic characteristics of missile wings and control surfaces

A method has been developed for estimating the nonlinear aerodynamic characteristics of missile wing and control surfaces. The method is based on the following assumption: if a fin on a body has the same normal-force coefficient as a wing alone composed of two of the same fins joined together at their root chords, then the other force and moment coefficients of the fin and the wing alone are the same including the nonlinearities. The method can be used for deflected fins at arbitrary bank angles and at high angles of attack. In the paper, a full derivation of the method is given, its accuracy demonstrated and its use in extending missile data bases is shown.

Hemsch, M. J.↗
NASA NTRS1991

Space environmental effects on silvered Teflon thermal control surfaces

Cumulative space environment effects on Ag/fluorinated ethylene propylene (FEP) were a function of exposure orientation. Samples from nineteen silvered Teflon (Ag/FEP) thermal control surfaces recovered from the Long Duration Exposure Facility (LDEF) were analyzed to determine changes in this material as a function of position on the spacecraft. Although solar absorptance and infrared emittance of measured thermal blanket specimens are relatively unchanged from control specimen values, significant changes in surface morphology, composition and chemistry were observed. Researchers hypothesize that the FEP surfaces on LDEF were degraded by ultraviolet radiation exposure at all orientations, but that the damaged material had been removed by erosion from the blankets exposed to atomic oxygen flux and that contamination is masking the damage on trays flanking the trailing edge.

Hemminger, C. S.↗
NASA NTRS1992

Space environmental effects on silvered Teflon thermal control surfaces

Cumulative space environmental effects on silver/fluorinated ethylene propylene (Ag/FEP) were a function of exposure orientation. Samples from nineteen silvered Teflon (Ag/FEP) thermal control surfaces recovered from the Long Duration Exposure Facility (LDEF) were analyzed to determine changes in this material as a function of position on the spacecraft. Although solar absorptance and infrared emittance of measured thermal blanket specimens are relatively unchanged from control specimen values, significant changes in surface morphology, composition, and chemistry were observed. We hypothesize that the FEP surfaces on the LDEF are degraded by UV radiation at all orientations, but that the damaged material has been removed by erosion from the blankets exposed to atomic oxygen flux and that contamination is masking the damage in some areas on the trays flanking the trailing edge.

Hemminger, C. S.↗
NASA NTRS1997

Nonlinear Behavior of a Typical Airfoil Section with Control Surface Freeplay: A Numerical and Experimental Study

A three degree-of-freedom aeroelastic typical section with control surface freeplay is modeled theoretically as a system of piecewise linear state-space models. The system response is determined by time marching of the governing equations using a standard Runge-Kutta algorithm in conjunction with Henon's method for integrating a system of equations to a prescribed surface of phase space section. Henon's method is used to locate the "switching points" accurately and efficiently as the system moves from one linear region into another. An experimental model which closely approximates the three degree-of-freedom, typical section in two-dimensional, incompressible flow has been created to validate the theoretical model. Consideration is given to modeling realistically the structural damping present in the experimental system. The effect of the freeplay on the system response is examined numerically and experimentally. The development of the state-space model offers a low-order, computationally efficient means of modeling fully the freeplay nonlinearity and may offer advantages in future research which will investigate the effects of freeplay on the control of flutter in the typical section.

Conner, M. D.↗
NASA NTRS1980

Calculation of the transient motion of elastic airfoils forced by control surface motion and gusts

The time-domain equations of motion of elastic airfoil sections forced by control surface motions and gusts were developed for the case of incompressible flow. Extensive use was made of special functions related to the inverse transform of Theodorsen's function. Approximations for the special cases of zero stream velocity, small time, large and time are given. A numerical solution technique for the solution of the general case is given. Examples of the exact transient response of an airfoil are presented.

Balakrishnan, A. V.↗
NASA NTRS1982

Computation of viscous hypersonic flow over control surfaces

A parabolized Navier-Stokes (PNS) computer code has been used to compute hypersonic flow over control surfaces located on the aft end of generic re-entry configurations. The Beam-Warming implicit numerical algorithm as modified by Schiff and Steger is used to march in the spatial direction. The outer bow shock is treated as a sharp discontinuity; within the shock layer discontinuities are captured. Several different turbulent flow solutions were generated for flap angles varying from -7 deg to 15 deg and angles of attack varying from 0 deg to 20 deg. The present results are qualitatively correct when compared with previous compression corner studies.

Chaussee, D. S.↗
NASA NTRS2011

Simulation of Grid-Fin Control Surfaces

Conference poster using previously disclosed techniques and methods (see ARC 16210 & 16212). We present simulations of grid-fin control surfaces to demonstrate geometric complexity and numerical robustness. These results have relevance to high-performance computing and performance of grid-fin-based control systems.

Aftosmis, Michael J.↗
NASA NTRSDate not supplied

Evaluation of CFD for Simulation of High-Supersonic Control Surface Effectiveness

This is the set of slides describing the CFD and wind-tunnel test studying the control surfaces of the CobraMRV concept for entry, descent, and landing on Mars. Difference between the CFD and wind-tunnel results are highlighted with the intent of showing whether CFD can replace wind-tunnel testing in the high supersonic flight regime.

wind tunnel↗