SEARCH · Search NASA

Results for “convective instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Numerical simulations of the subsynoptic features associated with the AVE-SESAME I case. I - The preconvective environment

The extensive diagnostic calculations made possible by the AVE-SESAME I database are used in combination with numerical simulations from the Mesoscale Atmospheric Simulation System (MASS) model to examine the dynamics of the meso-alpha-scale features during the preconvective period from 1130 to 2030 UTC on April 10, 1979. The version of the MASS model used in this investigation is presented, and an overview of the general synoptic conditions present at the time of model initialization is presented along with the data used to initialize the model. The dynamical processes present in the numerical simulations are presented and compared with analyses of the observational data from this and other investigations of this case. The relative importance of the adiabatic and diabatic processes in creating and then initiating the release of the convective instability is discussed.

Zack, John W.↗

NASA NTRS1988

Heating rates in tropical anvils

The interaction of infrared and solar radiation with tropical cirrus anvils is addressed. Optical properties of the anvils are inferred from satellite observations and from high-altitude aircraft measurements. An infrared multiple-scattering model is used to compute heating rates in tropical anvils. Layer-average heating rates in 2 km thick anvils were found to be on the order of 20 to 30 K/day. The difference between heating rates at cloud bottom and cloud top ranges from 30 to 200 K/day, leading to convective instability in the anvil. The calculations are most sensitive to the assumed ice water content, but also are affected by the vertical distribution of ice water content and by the anvil thickness. Solar heating in anvils is shown to be less important than infrared heating but not negligible. The dynamical implications of the computed heating rates are also explored and it is concluded that the heating may have important consequences for upward mass transport in the tropics. The potential impact of tropical cirrus on the tropical energy balance and cloud forcing are discussed.

Ackerman, Thomas P.↗

NASA NTRS1990

Analytical study of the origin and behavior of asymmetric vortices

An hypothesis advanced originally to explain computational observations is supported by theoretical considerations: The asymmetric mean flow observed on bodies of revolution at moderate to high angles of attack is the result of a convective instability of an originally symmetric flow to a time-invariant space-fixed disturbance. Additionally, the time-dependent fluctuations characteristic of the flow at higher angles of attack (up to 90 deg) are the result of an absolute instability of an originally steady flow to a small temporal disturbance of finite duration. Within a common domain, the instability mechanisms may coexist. The experimentally confirmed existence of bistable states, wherein the side-force variation with nose roll angle approaches a square-wave distribution, is attributed to the dominant influence of a pair of trailing vortices from the ogival forebody. Their existence is made possible by the appearance of foci of separation in the skin-friction line pattern beyond a critical angle of attack. The extreme sensitivity of the asymmetric flow orientation to nose geometry, demonstrated experimentally, is attributed to the presence of an indeterminate phase in the family of possible solutions for the three-dimensional wave system.

Tobak, Murray↗

NASA NTRS1991

An observational and theoretical study of highly supercooled altocumulus

The microphysics of two altocumulus clouds sampled at a temperature of about -30 C through the NCAR King Air aircraft and coincident lidar has been characterized. The clouds are structurally similar to stratocumulus and have extensive cloudtop entrainment, a capping temperature inversion, and a dry layer above. Microphysical and radiative properties of both clouds have been modeled numerically. When entrainment effects are incorporated in the model, calculations of droplet concentration and mean diameter profiles compare favorably with the measurements. Radiative transfer calculations indicate that radiative cooling causes sufficient negative buoyancy in cloudtop parcels for producing convective instability and reproducing the observed downdraft velocities. It is shown that entrainment of warmer, drier air near a cloudtop counteracts the radiatively induced negative buoyancy in the downdrafts.

Heymsfield, Andrew J.↗

NASA NTRS1991

Effect of splitter plate on unsteady flows around a body of revolution at incidence

Numerical solutions of the thin-layer approximation of the 3D Navier-Stokes equations are presented for flows around an ogive-cylinder body with and without a splitter plate. It is suggested that the presence of the splitter plate prevents the interaction between flows on either side of the symmetry plane. It is concluded that, as a result of the enforced symmetry, the antisymmetric mode of the convective instability near the apex of the body cannot be excited and, therefore, the vortices remain symmetric, staying low and parallel to the upper body surface. The antisymmetric mode of the absolute instability mechanism cannot be initiated, which suppresses the alternate shedding of vortices from the cylindrical portion of the body. High-frequency fluctuations of the shear layer are found to remain virtually unaffected by the presence of the splitter plate.

Degani, David↗

NASA NTRS1992

Effect of upstream disturbance on flow asymmetry

Results are presented of an experimental study aimed at revealing the origin of the asymmetric mean flow that occurs on pointed bodies of revolution at moderate-to-high angles of attack. The placement of a small fixed disturbance (a minute spherical bead) on a very thin wire at various locations in the flow near the tip of the model is shown to provoke the same range of behavior of the asymmetric flow that was produced earlier by use of a controlled retractable wire protuberance, here without touching or altering the tip at all. Results remain consistent with the presence of a convective instability mechanism, and demonstrate the potential for a precise mapping of the body's receptivity to fixed disturbances in the flowfield.

Degani, David↗

NASA NTRS1992

The influence of gravity level during directional solidification of immiscible alloys

During directional solidification of immiscible (hypermonotectic) alloys it is theoretically possible to establish a stable macroscopically-planar solidification front, and thus avoid sedimentation. Unfortunately, convective instabilities often occur which interfere with the directional solidification process. In this paper, stability conditions are discussed and results presented from directional solidification studies carried out aboard NASA's KC-135 zero-g aircraft. Samples were directionally solidified while the effective gravity level was varied from approximately 0.01 g for 25 s to 1.8 g for 45 s. Dramatic variations in microstructure were observed with gravity level during solidification.

Andrews, J. B.↗

NASA NTRS1993

A review of design concepts for the Advanced Fluids Module (AFM) project

This paper reviews preliminary fluid module design concepts for the Advanced Fluids Module (AFM) project. The objective of this effort is to provide a facility that can handle a wide variety of fluids experiments. Sample science requirements were written and conceptual designs were subsequently generated during the last year. Experiments from the following fluid physics subject areas were used as conceptual design drivers: static and dynamic interfacial phenomena; bubble/droplet thermocapillary migration; surface tension convection and instabilities; thermal/solutal convection; pool boiling; and multiphase flow. After the conceptual designs were completed, the next phase attempted to combine experiments capabilities into a multipurpose, multiuser apparatus configured for the Space Station Freedom. It was found that all the fluid subject areas considered could be accommodated by three basic types of fluids modules. These modules are the Static Fluid Cell Module, the Dynamic Fluid Cell Module, and the Multiphase Flow Module. Descriptions of these preliminary modules designs and their particular sub-systems (e.g., fluid and thermal systems) are discussed. These designs will be refined as the nature of the flight program becomes clearer over the next six to twelve months.

Hill, Myron E.↗

NASA NTRS1993

Mach wave emission from a high temperature supersonic jet

The paper considers the compressible Rayleigh equation as a model for the Mach wave emission mechanism associated with high temperature supersonic jets. Solutions to the compressible Rayleigh equation reveal the existence of several families of supersonically convecting instability waves. These waves directly radiate noise to the jet far field. The predicted noise characteristics are compared to previously acquired experimental data for an axisymmetric Mach 2 fully pressure balanced jet operating over a range of jet operating total temperatures from ambient to 1370 K. The results of this comparison show that the first order supersonic instability wave and the Kelvin-Helmholtz first, second, and third order modes have directional radiation characteristics that are in agreement with observed data. The assumption of equal initial amplitudes for all of the waves leads to the conclusion that the flapping mode of instability dominates the noise radiation process of supersonic jets. At a jet temperature of 1370 K, supersonic instability waves are predicted to dominate the noise radiated at high frequency at narrow angles to the jet axis.

Seiner, J. M.↗

NASA NTRS1992

Brightness temperature simulations for the physical interpretation of AMSU moisture channels

The use of the Advanced Microwave Sounding Unit (AMSU) moisture imagery for the dynamic, kinematic, and synoptic interpretations requires the availability of idealized 'soundings' of temperature, water vapor, and cloudiness as input to a radiative transfer model for determining how atmospheric conditions control the top-of-atmosphere brightness temperatures. This paper uses idealized vertical configurations of atmospheric water vapor and liquid cloud water to illustrate their effects on the AMSU moisture channels. Calculations with various cloud-drop size distribution functions (SDFs) showed that, at least for the specific SDFs used in this work, the Rayleigh approximation is invalid for mode radii greater than 30-40 microns, for frequencies above 89.0 GHz. It is also invalid above about 20 microns for frequencies above 157 GHz. It is concluded that AMSU moisture channels might not be suitable for detecting convective instability over land using image-based approaches.

Muller, Bradley M.↗

NASA NTRS1991

The effect of processing conditions on solidified structures in immiscible systems

The incentive for low-gravity processing of immiscible alloys is usually tied to an attempt to eliminate sedimentation of the more dense immiscible liquid phase during processing. However, many other factors can influence the solidified structure of these alloys. For example, crucible wetting by one of the immiscible liquid phases during normal (non-directional) low-gravity solidification in a container has been shown to often lead to a completely separated structure. For containerless, low-gravity processing, alloy composition has a tremendous affect on the structure formed. During directional solidification, alloy composition, thermal gradient, solidification rate, convective instability and the miscibility gap height of the system all have a major effect on the structures obtained. This paper discusses the conditions necessary for the production of desired microstructures in each of these processing techniques. Examples are shown of samples processed under both desirable and undesirable conditions.

Andrews, J. B.↗

NASA NTRS1994

Rotational effects in turbulence driven by convection

We have treated turbulence with rotation in a thin Keplerian disk. Highlighting implicit assumptions already existent in the alpha model together with a geometrical but physically reasonable deduction of the degrees of freedom of the largest eddies, which is of paramount importance in our formulation, we were able to obtain relations satisfied by parameters of the turbulence, such as turnover time and alpha. The effects of rotation in the turbulence we have taken implictly through an anisotropy factor (x) which is simply related to the Rossby number. Convection is the process assumed to generate turbulence, and we have used Canuto and Goldman's treatment of convective instability, whose characteristic growth time we have assumed equal to the turnover time. We have also used their procedure to obtain the turbulent viscosity.

Meirellesfilho, C.↗

NASA NTRS1994

Mach wave emission from a high-temperature supersonic jet

The paper considers the compressible Rayleigh equation as a model for the Mach wave emission mechanism associated with high-temperature supersonic jets. Solutions to the compressible Rayleigh equation reveal the existence of several families of supersonically convecting instability waves. These waves directly radiate noise to the jet far field. The predicted noise characteristics are compared to previously acquired experimental data for an axisymmetric Mach 2 fully pressure balanced jet operating over a range of jet total temperatures from ambient to 1370 K. The results of this comparison show that the first-order supersonic instability wave and the Kelvin-Hemlhlotz first-, second-, and third-order modes have directional radiation characteristics that are in agreement with observed data. The assumption of equal initial amplitudes for all of the waves leads to the conclusion that the flapping mode of instability dominates the noise radiatio process of supersonic jets. At a jet temperature of 1370 K, supersonic instability waves are predicted to dominate the noise radiated at high frequency at narrow angles to the jet axis.

Seiner, John M.↗

NASA NTRS1997

Lattice Dynamics of Colloidal Crystals During Photopolymerization of Acrylic Monomer Matrix

Polymerization process are the major contributors for observed lattice compression and lattice disorder of the Crystalline Colloidal Arrays (CCA) of silica spheres in polymerized acrylic/methacrylic ester films. The effect of orientation of photocell with respect to the readiation source on Bragg diffraction of CCA indicated the presence of convective stirring in thin fluid system during the photopolymerization that deleteriously affect the periodic array structures. To devise reproducible and more efficient optical filters, experimental methods to minimize or eliminate convective instabilities in monomeric dispersions during polymerization are suggested.

Sunkara, Hari B.↗

NASA NTRS1998

Lattice Dynamics of Colloidal Crystals During Photopolymerization of Acrylic Monomer Matrix

The photoinitiated bulk polymerization process, which has been used recently in the manufacture of solid optical diffraction filters, is examined to understand the dynamics of both the crystalline colloidal arrays (CCA) and the host monomer species. Our analysis indicates that volume shrinkage of the monomer, changes in the dielectric properties of the monomer, and inhomogeneities of polymerization reaction rate across the dispersion during the polymerization process, are the major contributors for observed lattice compression and lattice disorder of the CCA of silica spheres in polymerized acrylic/methacrylic ester films. The effect of orientation of photocell with respect to the radiation source on Bragg diffraction of CCA indicated the presence of convective stirring in the thin fluid system during the photopolymerization that deleteriously affects the periodic array structures. To devise reproducible and more efficient optical filters, experimental methods to minimize or eliminate convective instabilities in monomeric dispersions during polymerization are suggested.

Sunkara, H. B,↗

NASA NTRS2000

Use of Maps, GTE and UARS-MLS Data in Understanding Tropospheric Processes Critical to Model Development

Two of the major problems in using meteorological models to explain observed tropospheric trace constituent distributions and thereby to understand the global budgets of the tracers are to properly define the vertical layered structure in the free atmosphere, and to understand the contribution of advection processes in generating horizontal inhomogeneities at all scales. We proposed to tackle these problems through the examination of an extensive collection of trace constituent data from research and commercial aircraft in conjunction with meteorological data from the European Center for Medium-Range Weather Forecasts. The physical mechanisms responsible for these advection and layering processes were explored and their implications for theories and models assessed. In addition, we calculated examples of how thin layers (not currently resolved by models) affect the radiative heating/cooling rates. We developed an improved algorithm for trace constituent layer detection, and used it to analyze over 100,000 km of ozone and humidity vertical profiles collected by instruments piggybacked on commercial aircraft. We have also performed radiative heating/cooling calculations on some observed layer structures, and have demonstrated that the sharp edges on humidity layers can have strong local effects of self-stabilization (dry layers) or destabilization (wet layers), and have suggested that clear-air turbulence might result from the latter case through convective instability. We also systematically analyzed the mesoscale variabilities, not only of the trace constituents, but also of the aircraft-measured dynamical variables.

Newell, Reginald E.↗

NASA NTRS1999

Iterated Stretching of Viscoelastic Jets

We examine, with asymptotic analysis and numerical simulation, the iterated stretching dynamics of FENE and Oldroyd-B jets of initial radius r(sub 0), shear viscosity nu, Weissenberg number We, retardation number S, and capillary number Ca. The usual Rayleigh instability stretches the local uniaxial extensional flow region near a minimum in jet radius into a primary filament of radius [Ca(1 - S)/ We](sup 1/2)r(sub 0) between two beads. The strain-rate within the filament remains constant while its radius (elastic stress) decreases (increases) exponentially in time with a long elastic relaxation time 3We(r(sup 2, sub 0)/nu). Instabilities convected from the bead relieve the tension at the necks during this slow elastic drainage and trigger a filament recoil. Secondary filaments then form at the necks from the resulting stretching. This iterated stretching is predicted to occur successively to generate high-generation filaments of radius r(sub n), (r(sub n)/r(sub 0)) = square root of 2[r(sub n-1)/r(sub 0)](sup 3/2) until finite-extensibility effects set in.

Chang, Hsueh-Chia↗

NASA NTRS2000

Geometric Perturbations and Asymmetric Vortex Shedding about Slender Pointed Bodies

The flow about slender, pointed bodies can be characterized by different states with angle of attack. At moderate-to-high angles of attack (alpha approx. = 40 deg.), a steady, asymmetric vortex pattern develops along the body, leading to a net lateral force. At higher angles of attack (alpha approx. = 60 deg.), the aft-end of the body develops an unsteady von Karman shedding. As the angle of attack approaches 90 deg., the entire body length exhibits a time-dependent vortex shedding pattern. The current work uses three-dimensional, thin-layer Navier-Stokes simulations to investigate the physical mechanisms of asymmetric vortex shedding at alpha = 40 deg. and alpha = 60 deg. The development of an asymmetric vortex pattern via a convective instability mechanism is investigated using tip bumps, surface roughness, and tip curvature. It's found that surface roughness simulations can incite an asymmetric vortex state at alpha = 60 deg. which is consistent with the application of a tip bump, and the experimentally observed flowfield. The unsteady von Karman vortex shedding on the aft. portion of the body is also well resolved. The use of surface roughness did not incite a flow asymmetry at alpha = 40 deg., and it was necessary to simulate tip curvature at this angle of attack in order to generate an asymmetric vortex state.

Murman, Scott M.↗