Search NASA⌕ Search

SEARCH · Search NASA

Results for “coordination modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Hierarchical Control of Grid-Connected Hydrogen Electrolyzer Providing Grid Services

This paper presents the operational modes and control architecture of the grid-connected hydrogen electrolyzer systems for the provision of frequency and voltage supports. The analysis is focused on the primary and secondary loops in the hierarchical control scheme. At the power converter inner control loop, the voltage- and current-control modes are analyzed. At the primary level, the droop and opposite droop control strategies to provide voltage and frequency support are described. Coordination between primary control and secondary, tertiary reserves is briefly discussed. The case studies and real-time hardware-in-the-loop simulation results are provided using Typhoon HIL to back the theoretical investigation.

ancillary services↗
DOE OSTI2022

A Multiagent Deep Reinforcement Learning-Enabled Dual-Branch Damping Controller for Multimode Oscillation

Here, this study develops a multiagent deep reinforcement learning (MADRL)-enabled framework for the decentralized cooperative control of a novel dual-branch (DB) damping controller for both low-frequency oscillation (LFO) and ultralow-frequency oscillation (ULFO). It has two branches, each of which consists of a proportional resonance (PR) and a second-order polynomial that is designed to handle target oscillation modes. To improve the robustness of the controller to system uncertainties, MADRL is developed, where multiagents are centrally trained to obtain the coordinated adaptive control policy while being executed in a decentralized manner to provide the optimal parameter setting for each controller with only local states. Comparisons with the IEEE 10-machine 39-bus system demonstrate that the proposed method achieves better robustness to uncertainties, lower communication delay, and single-point failure, as well as damping control performances for both LFO and ULFO.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Electro-mechanical Modeling of Wind Turbine and Energy Storage Systems with Enhanced Inertial Response

In this paper, a coordinated control scheme for wind turbine generator (WTG) and supercapacitor energy storage system (ESS) is proposed for temporary frequency supports. Inertial control is designed by using generator torque limit considering the security of WTG system, while ESS releases its energy to compensate the sudden active power deficit during the recovery process of turbine rotor. WTG is modeled using the fatigue, aerodynamic, structure, turbulence (FAST) code, which identifies the mechanical loadings of the turbine and addresses electro-mechanical interactions in the wind energy system. A damping controller is augmented to the inertial control to suppress severe mechanical oscillations in the shaft and tower of the turbine during frequency supports. Furthermore, the result of small-signal stability analysis shows that the WTG-ESS tends to improve the stability of the whole multi-energy power grid. The major contributions of this paper will be validated by utilizing the proposed control method that combines the grid support capability and maintaining the integrity of structural design of the turbine for normal operations.

17 WIND ENERGY↗
DOE OSTI2024

Separable physics-informed DeepONet: Breaking the curse of dimensionality in physics-informed machine learning

The deep operator network (DeepONet) has shown remarkable potential in solving partial differential equations (PDEs) by mapping between infinite-dimensional function spaces using labeled datasets. However, in scenarios lacking labeled data, the physics-informed DeepONet (PI-DeepONet) approach, which utilizes the residual loss of the governing PDE to optimize the network parameters, faces significant computational challenges, particularly due to the curse of dimensionality. This limitation has hindered its application to high-dimensional problems, making even standard 3D spatial with 1D temporal problems computationally prohibitive. Additionally, the computational requirement increases exponentially with the discretization density of the domain. Here, to address these challenges and enhance scalability for high-dimensional PDEs, we introduce the Separable physics-informed DeepONet (Sep-PI-DeepONet). This framework employs a factorization technique, utilizing sub-networks for individual one-dimensional coordinates, thereby reducing the number of forward passes and the size of the Jacobian matrix required for gradient computations. By incorporating forward-mode automatic differentiation (AD), we further optimize computational efficiency, achieving linear scaling of computational cost with discretization density and dimensionality, making our approach highly suitable for high-dimensional PDEs. We demonstrate the effectiveness of Sep-PI-DeepONet through three benchmark PDE models: the viscous Burgers’ equation, Biot’s consolidation theory, and a parameterized heat equation. Our framework maintains accuracy comparable to the conventional PI-DeepONet while reducing training time by two orders of magnitude. Notably, for the heat equation solved as a 4D problem, the conventional PI-DeepONet was computationally infeasible (estimated 289.35 h), while the Sep-PI-DeepONet completed training in just 2.5 h. These results underscore the potential of Sep-PI-DeepONet in efficiently solving complex, high-dimensional PDEs, marking a significant advancement in physics-informed machine learning.

Neural operator↗
DOE OSTI2023

High-strength, lightweight nano-architected silica

Continuous nanolattices are an emerging class of mechanical metamaterials that are highly attractive due to their superior strength-to-weight ratios, which originate from their spatial architectures and nanoscale-sized elements possessing near-theoretical strength. Rational design of frameworks remains challenging below 50 nm because of limited methods to arrange small elements into complex architectures. Here, we fabricate silica frameworks with ~4- to 20-nm-thick elements using self-assembly and silica templating of DNA origami nanolattices and perform in situ micro-compression testing to examine the mechanical properties. We observe strong effects of lattice dimensions on yield strength (σ $\mathcal{y}$ ) and failure mode. Silica nanolattices are found to exhibit yield strengths higher than those of any known engineering materials with similar mass density. The robust coordination of the nanothin and strong silica elements leads to the combination of lightweight and high-strength framework materials offering an effective strategy for the fabrication of nanoarchitected materials with superior mechanical properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Atomistic insight into the ferroelastic post-stishovite transition by high-pressure single-crystal X-ray diffraction

Abstract The post-stishovite transition is a classic pseudo-proper typed ferroelastic transition with a symmetry-breaking spontaneous strain. This transition has been studied using high-pressure spontaneous strains, optic modes, and elastic moduli (Cij) based on the Landau modeling, but its atomistic information and structural distortion remain poorly understood. Here we have conducted synchrotron single-crystal X-ray diffraction measurements on stishovite crystals up to 75.3 GPa in a diamond-anvil cell. Analysis of the data reveals atomic positions, bond lengths, bond angles, and variations of SiO6 octahedra across the transition at high pressure. Our results show that the O coordinates split at ~51.4 GPa, where the apical and equatorial Si-O bond lengths cross over, the SiO6 octahedral distortion vanishes, and the SiO6 octahedra start to rotate about the c axis. Moreover, distortion mode analysis shows that an in-plane stretching distortion (GM1+ mode) occurs in the stishovite structure at high pressure while a rotational distortion (GM2+ mode) becomes dominant in the post-stishovite structure. These results are used to correlate with elastic moduli and Landau parameters (symmetry-breaking strain e1–e2 and order parameter Q) to provide atomistic insight into the ferroelastic transition. When the bond lengths of two Si-O bonds are equal due to the contribution from the GM1+ stretching mode, C11 converges with C12, and the shear wave VS1[110] polarizing along [110] and propagating along [110] vanishes. Values of e1–e2 and Q are proportional to the SiO6 rotation angle from the occurrence of the GM1+ rotational mode in the post-stishovite structure. Our results on the pseudo-proper type transition are also compared with that for the proper type in albite and improper type in CaSiO3 perovskite. The symmetry-breaking strain, in all these types of transitions, arises as the primary effect from the structural angle (such as SiO6 rotation or lattice constant angle) and its relevant distortion mode in the low-symmetry ferroelastic phase.

Geochemistry & Geophysics↗
DOE OSTI2020

Normal modes, rotational inertia, and thermal fluctuations of trapped ion crystals

The normal modes of a trapped ion crystal are derived using an approach based on the Hermitian properties of the system’s dynamical matrix. This method is equivalent to the standard Bogoliubov method, but for classical systems it is arguably simpler and more general in that canonical coordinates are not necessary. The theory is developed for stable, unstable, and neutrally-stable systems. The method is then applied to ion crystals in a Penning trap. Reduced eigenvalue problems for the case of large applied magnetic field are developed, for which the spectrum breaks into E x B drift modes, axial modes, and cyclotron modes. Thermal fluctuation levels in these modes are analyzed and shown to be consistent with the Bohr-van-Leeuwen theorem, provided that neutrally-stable modes associated with crystal rotations are included in the analysis. An expression for the rotational inertia of the crystal is derived, and a magnetic contribution to this inertia, which dominates in large magnetic fields, is described. An unusual limit is discovered for the special case of spherically-symmetric confinement, in which the rotational inertia does not exist and changes in angular momentum leave the rotation frequency unaffected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Structural Trends and Vibrational Analysis of N,N,N′,N′−Tetramethylmalonamide Complexes Across the Lanthanide Series

Fundamental understanding of coordination chemistry across the lanthanide series is essential for explaining chemical behavior of rare-earth metals in complex liquid-liquid extraction processes, which in turn affects the distribution ratios and efficacy of separations as a whole. In this work, we explore the structural trends between the lanthanides and a neutral N,N,N',N'-tetramethylmalonamide (TMMA) ligand within four isolated families of solid-state compounds: Ln(trans-TMMA) 2 (NO 3 ) 3 Ln=La-Nd, Sm; Ln(cis-TMMA) 2 (NO 3 ) 3 Ln=Eu-Tb, Er; [Ln(TMMA) 3 (NO 3 ) 2 ][Ln(TMMA)(NO 3 ) 4 ] Ln=Dy-Tm; Ln(Κ 2 -TMMA)(iPrOH)(NO 3 ) 3 and Ln(Κ 1 -TMMA)(Κ 2 -TMMA)(NO 3 ) 3 Ln=Yb, Lu. Moving across the lanthanide series, we note the formation of both discrete charge-neutral complexes, as well as charged molecular anion-cation pairs, with variations in spatial ligand arrangement, coordination numbers, and ligand denticities. IR and Raman spectroscopy paired with DFT frequency calculations were used for an in-depth investigation of vibrational modes unique to each structural family. The collection of isolated model compounds was also discussed in the context of liquid-liquid separations based on reported distribution ratios from malonamide extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ancillary Steric Effects on the Activation of SiH Bonds in Arylsilazido Rare-Earth Compounds

Three new hydridosilazido ligands, –N(SiHMe 2 )Aryl (Aryl = Ph, 2,6-C 6 Me 2 H 3 (dmp), 2,6-C 6 iPr 2 H 3 (dipp)) and their rare-earth complexes Ln{N(SiHMe 2 )Aryl} 3 (THF) n (Ln = Sc, Y, Lu; Aryl = Ph, n = 2; Aryl = dmp, n = 1; Aryl = dipp, n = 0) were synthesized to study the relationships among ligand steric properties, secondary Ln←H–Si bonding, and the reactivity of amide and SiH groups. In these compounds, the steric encumbrance of the aryl group was systematically increased from phenyl to 2,6-dimethylphenyl to 2,6-diisopropylphenyl. NMR, IR, and X-ray diffraction studies of the complexes characterize the number of secondary interactions and additional THF ligands coordinated to the rare-earth centers. The complexes with the smallest phenylsilazido ligands, Ln{N(SiHMe 2 )Ph} 3 (THF) 2 , contain features associated with three nonbridging 2-center-2-electron (2c-2e) Si–H bonds. Characterization of intermediate-sized Ln{N(SiHMe 2 )dmp} 3 THF reveals three and two Ln←H–Si interactions for yttrium and lutetium analogues, respectively, with both metals having one coordinated THF per complex. Ln{N(SiHMe 2 )dipp} 3 is formed solvent-free, and all three ligands adopt Ln←H–Si bonding modes. The reaction between Ln{N(SiHMe 2 )dipp} 3 and ketones provides the hydrosilylated product via addition of C=O and Si–H bonds, which occurs rapidly even at low temperature. Furthermore, this reaction is proposed to occur through an associative mechanism on the basis of negative activation entropy measured for substitution of pyridine in Ln{N(SiHMe 2 )dipp} 3 ·NC 5 H 5 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A Self-Organizing Nano Grid (SONG) for Energy Access Clusters

In this paper, a bottom-up dc Self-Organizing Nano Grid (SONG) for rural electrification at ultra-low-cost through a flexible and scalable topology is presented. The proposed nano grid requires no communication and uses dc-bus signaling to convey excess energy in the system through the bus voltage, allowing independent agents to conduct energy transactions based on their needs in a decentralized manner. Moreover, this article proposes a concept that uses a novel multi-source, multi-segment droop control strategy with demand coordination, allowing for dynamic self-balancing of the system under fluctuating operating conditions. The unique use of a surplus photovoltaic (PV) power droop mode precisely estimates energy availability to minimize load chattering that helps in stabilizing the dc-bus. In addition, this architecture uses standard dc/dc converters for a low-cost, modular, Plug and Play ( PnP ) solution with highly automated operation, enabling local assembly, operation, and maintenance by non-technical personnel. The proposed SONG concept was validated in simulation and with a 700W, laboratory-scale, custom made nano grid system. The simulation and experimental test cases show the feasibility of the SONG system by demonstrating the proposed multi-source, multi-segment droop control strategy without load chattering under varying operating conditions.

dc-dc converter↗
DOE OSTI2025

Watching Polarons Dance: Coherent Carrier–Phonon Coupling in Hematite Revealed by Transient Absorption Spectroscopy

Hematite remains a prominent photoanode candidate for the oxygen evolution reaction in solar water splitting, despite efficiency limitations from rapid trapping of photoexcited electrons and holes. While the formation of polarons, quasiparticles formed by electron–hole interactions with lattice vibrations, is a proposed trapping mechanism, direct evidence of such states has been elusive. Here, we use potential-dependent transient absorption spectroscopy to identify the coherent phonon mode and strong exciton–phonon coupling responsible for exciton–polaron formation after band gap excitation in α-hematite and identify the three underlying d–d transitions that are strongly modulated by this phonon. The equilibrium geometry of exciton–polarons in α-hematite is displaced from the ground state geometry along the vibrational coordinate of an A 1g symmetric Fe–O stretching motion at 225 ± 7 cm –1 , resulting in vibrational coherence with a lifetime of 1.9 ± 0.1 ps. Our comparative ex situ and in situ experiments reveal that the energy and dephasing time of the A 1g mode are remarkably resilient to applied potential and the addition of an Al 2 O 3 overlayer; however, the dephasing time is sensitive to substrate identity. Furthermore, this potential-dependent transient absorption approach establishes a powerful platform for directly probing polaron dynamics in photoelectrochemical systems, opening new pathways to rationally design modified hematite and other transition metal oxide electrodes with enhanced charge transport properties for more efficient solar water splitting.

Hematite↗
DOE OSTI2024

Excitation protocols for nonlinear phononics in bismuth and antimony

Here, we study the optical generation and control of coherent phonons in elemental bismuth (Bi) and antimony (Sb) using a classical equation of motion informed by first-principles calculations of the potential energy surface and the frequency-dependent macroscopic dielectric function along the zone-centered optical phonon coordinates. Using this approach, we demonstrate that phonons with the largest optomechanical couplings also have the strongest degree of anharmonicity among the zone-centered modes, a result of the broken-symmetry structural ground state of Bi and Sb. We show how this anharmonicity, explaining the light-induced phonon softening observed in experiments, prevents the application of standard phonon-amplification and annihilation protocols. We introduce a simple linearization protocol that extends the use of such protocols to the case of anharmonic phonons in broken-symmetry materials, and demonstrate its efficiency at high displacement amplitudes. Our formalism and results provide a path for improving optical control in nonlinear phononics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coordinated Control of Natural and Sub-Synchronous Oscillations via HVDC Links in Great Britain Power System

Conventional power oscillation damping (POD) controllers have been designed to be effective in damping either inter-area low-frequency oscillations (LFO) or sub-synchronous oscillations (SSO). For those POD controls, model-based control design method has been widely implemented with wide-area feedback signals from phasor measurement units (PMU). However, the model accuracy of a large realistic power system can hardly be guaranteed, which will finally impact the POD damping performance. In this paper, a measurement-based method is proposed for POD design using High Voltage Direct Current links (HVDC) to realize the coordinated control of both LFO and SSO. For each type of oscillations, a band-pass filter is added to avoid the interactions between different modes. Case studies are carried out on the Great Britain 36-bus power system model with multiple HVDC links in DIgSILENT/PowerFactory. Simulation results demonstrate that the proposed PODs are effective in damping inter-area LFO and SSO simultaneously.

Zhao, Yi↗
DOE OSTI2024

Utah FORGE: Well 16B(78)-32 DTS, RFS DSS Strain, and Absolute Strain Circulation Test Fiber Optic Data - August 2024

This dataset contains processed fiber optic measurements collected during the extended cross-well circulation test at the Utah FORGE site in August 2024. The data was acquired from the 16B(78)-32 well using distributed fiber optic sensing (DFOS) technology, including distributed temperature sensing (DTS) on multimode fiber and distributed strain sensing (DSS) measurements on single-mode fiber. The dataset includes Brillouin absolute strain, Rayleigh frequency shift (RFS) DSS strain change, RFS DSS strain change rate, and temperature (DTS) data, all stored in HDF5 format. Time coordinates are provided in UTC, and depth measurements are given in measured depth relative to the rotary kelly bushing (MD RKB) in feet. The spatial sampling on the RFS DSS strain data and the Brillouin Absolute Total Strain data is 20 cm and the spatial sampling on the DTS data is 1m. The dataset is accompanied by a report from Neubrex, which provides further documentation.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Effects of external kink and fishbone-like modes on energetic particle transport in tokamak plasmas

Transport and loss of beam injected energetic particles (EPs) due to three-dimensional perturbations, associated with the external kink (XK) instability and fishbone-like mode (FLM), are numerically investigated utilizing the guiding center following code ORBIT for static toroidal plasmas in HL-2A. The perturbation structure for the XK is computed by the MARS-F code and then mapped to the Boozer coordinates as defined in ORBIT. The simulation shows that the EP profile experiences a significant change in the middle of the plasma column, when the XK-induced radial magnetic field perturbation amplitude, normalized by the equilibrium field, exceeds a threshold value of about 10 -2 . The EP transport is found to be dominated by a diffusion process instead of convection. Furthermore, by scanning the perturbation frequency as a free parameter while maintaining the XK mode structure (thus mimicking the FLM as observed in DIII-D and JT-60U tokamaks), redistribution and loss of EPs are found to be substantially enhanced due to strong resonances between the FLM and EPs, when the mode frequency exceeds a threshold value of ~2 kHz for the case considered. For either XK or FLM, the response of passing EPs to the perturbation is dominant due to the assumed tangential neutral beam injection. Most lost EPs due to these instabilities are initially passing particles but are eventually lost through trapped orbits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

DFT-Based Calculation of Molecular Hyperpolarizability and SFG Intensity of Symmetric and Asymmetric Stretch Modes of Alkyl Groups

Vibrational sum frequency generation (SFG) spectroscopy has been extensively used for obtaining structural information of molecular functional groups at two-dimensional (2D) interfaces buried in the gas or liquid medium. Although the SFG experiment can be done elegantly, interpreting the measured intensity in terms of molecular orientation with respect to the lab coordinate is quite complicated. One of the main reasons is the difficulty of determining the hyperpolarizability tensors of even simple molecules that govern their SFG responses. The single-bond polarizability derivative (SBPD) model has been proposed to estimate the relative magnitude of SFG-active hyperpolarizability by assuming that the perturbation associated to each vibration is negligible. In this study, density functional theory (DFT) was used to calculate the polarizability and dipole derivative tensors of the CH 3 stretch mode of CH 3 I, CH 3 CH 2 I, CH 3 OH, CH 3 CH 2 OH. Then, the hyperpolarizability tensors of symmetric and asymmetric vibration modes were calculated considering the Boltzmann distribution of representative conformers, which allowed theoretical calculation of their SFG intensities at all polarization combinations as a function of the tilt angle of the CH 3 group with respect to the surface normal direction. Then the ratios of the calculated SFG intensities for the CH 3 peaks used in experimental studies for the CH 3 tilt angle determination were compared. This comparison clearly showed the effect of vibrational coupling among neighboring functional groups. As a result, this study presents new parameters that can be used in determining the average tilt angle of the CH 3 group at the 2D interface with SFG measurements as well as limitations of the method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Developing a Reduced 240-Bus WECC Dynamic Model for Frequency Response Study of High Renewable Integration

The ongoing changes in the generation resource mix, driven by the rapid adoption of inverter-based resources (IBR) as well as the early retirement of synchronous generators, are bringing new challenges to the planning and operation of bulk electric power systems. Consequently, there is an increasing need to understand, design, and quantify the reliability service provision from IBRs by performing integrated scheduling and dynamic simulations. However, test systems that have consistent scheduling and dynamic models rarely exist largely because of the decoupled nature of the two simulations on a synchronous generator-dominated system. This paper develops the dynamic model of a reduced Western Electricity Coordinating Council (WECC) system. In conjunction with the existing scheduling model, it is suitable for integrating scheduling and dynamic simulations. The reduced 240-bus WECC model reflects the generation resource mix of the Western Interconnection as of 2018. Moreover, the developed dynamic model is validated against field frequency events measured by FNET/GridEye and preserves the dominant inter-area oscillation mode in WECC.

dynamic simulation↗
DOE OSTI2025

Subharmonic Shapiro steps in depinning dynamics of a two-dimensional solid dusty plasma modulated by one-dimensional nonlinear deformed periodic substrates

Langevin dynamical simulations are performed to investigate the depinning dynamics of a two-dimensional (2D) solid dusty plasma, which is modulated by one-dimensional (1D) nonlinear deformed periodic substrates, and also driven by the combination of the DC and AC forces. As the DC driving force increases gradually, pronounced subharmonic and harmonic Shapiro steps are discovered under the combined modulation of the deformed substrate and the external AC drive. Here, these observed subharmonic and harmonic Shapiro steps are attributed to the dynamic mode locking. The data analysis results indicate that the nonlinear deformed substrate strongly influences these subharmonic Shapiro steps, which can be accurately diagnosed using the fraction of sixfold coordinated particles. Furthermore, the diagnostic of the kinetic temperature clearly indicates the difference between harmonic and subharmonic Shapiro steps, i.e., the particle motion is slightly less synchronized at subharmonic Shapiro steps, caused by the unstable locations of the deformed substrate.

36 MATERIALS SCIENCE↗