Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystal diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Vacancy-mediated complex phase selection in high entropy alloys

Phase selection in Ti-Zr-Hf-Al high-entropy alloys was investigated by in-situ high-energy x-ray diffraction, single-crystal x-ray diffraction, and KKR-CPA electronic-structure methods that address disorder and vacancies, predicting formation enthalpy and chemical short-range order (SRO). Samples with varying Al content were synthesized, characterized, and computationally assessed to ascertain the composition-dependent phase selection, as increased Al content often acts as a stabilizer of a body-centered-cubic structure. Equiatomic TiZrHfAl was especially interesting due to its observed bcc superstructure – a variant of γ-brass with 4 vacancies per cell (not 2 as in γ-brass). We highlight how vacancy ordering mediates selection of this variant of γ-brass, which is driven by vacancy-atom SRO that dramatically suppress all atomic SRO. As vacancies are inherent in processing refractory systems, we expect that similar discoveries await in other high entropy alloys or in revisiting older experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High Ammonia Adsorption in MFM-300 Materials: Dynamics and Charge Transfer in Host–Guest Binding

Ammonia (NH 3 ) is a promising energy resource owing to its high hydrogen density. However, its widespread application is restricted by the lack of efficient and corrosion-resistant storage materials. In this work, we report high NH 3 adsorption in a series of robust metal-organic framework (MOF) materials, MFM-300(M) (M = Fe, V, Cr, In). MFM-300(M) (M = Fe, V III , Cr) show fully reversible capacity for >20 cycles, reaching capacities of 16.1, 15.6, and 14.0 mmol g -1 , respectively, at 273 K and 1 bar. Under the same conditions, MFM-300(V IV ) exhibits the highest uptake among this series of MOFs of 17.3 mmol g -1 . In situ neutron powder diffraction, single-crystal X-ray diffraction, and electron paramagnetic resonance spectroscopy confirm that the redox-active V center enables host-guest charge transfer, with V IV being reduced to V III and NH 3 being oxidized to hydrazine (N 2 H 4 ). A combination of in situ inelastic neutron scattering and DFT modeling has revealed the binding dynamics of adsorbed NH 3 within these MOFs to afford a comprehensive insight into the application of MOF materials to the adsorption and conversion of NH 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

FMX – the Frontier Microfocusing Macromolecular Crystallography Beamline at the National Synchrotron Light Source II

Two new macromolecular crystallography (MX) beamlines at the National Synchrotron Light Source II, FMX and AMX, opened for general user operation in February 2017 [Schneider et al. (2013). J. Phys. Conf. Ser. 425 , 012003; Fuchs et al. (2014). J. Phys. Conf. Ser. 493 , 012021; Fuchs et al. (2016). AIP Conf. Proc. SRI2015 , 1741 , 030006]. FMX, the micro-focusing Frontier MX beamline in sector 17-ID-2 at NSLS-II, covers a 5–30 keV photon energy range and delivers a flux of 4.0 × 10 12 photons s −1 at 1 Å into a 1 µm × 1.5 µm to 10 µm × 10 µm (V × H) variable focus, expected to reach 5 × 10 12 photons s −1 at final storage-ring current. This flux density surpasses most MX beamlines by nearly two orders of magnitude. The high brightness and microbeam capability of FMX are focused on solving difficult crystallographic challenges. The beamline's flexible design supports a wide range of structure determination methods – serial crystallography on micrometre-sized crystals, raster optimization of diffraction from inhomogeneous crystals, high-resolution data collection from large-unit-cell crystals, room-temperature data collection for crystals that are difficult to freeze and for studying conformational dynamics, and fully automated data collection for sample-screening and ligand-binding studies. FMX's high dose rate reduces data collection times for applications like serial crystallography to minutes rather than hours. With associated sample lifetimes as short as a few milliseconds, new rapid sample-delivery methods have been implemented, such as an ultra-high-speed high-precision piezo scanner goniometer [Gao et al. (2018). J. Synchrotron Rad. 25 , 1362–1370], new microcrystal-optimized micromesh well sample holders [Guo et al. (2018). IUCrJ , 5 , 238–246] and highly viscous media injectors [Weierstall et al. (2014). Nat. Commun. 5 , 3309]. The new beamline pushes the frontier of synchrotron crystallography and enables users to determine structures from difficult-to-crystallize targets like membrane proteins, using previously intractable crystals of a few micrometres in size, and to obtain quality structures from irregular larger crystals.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

High-pressure high-temperature synthesis of NdRe 2

In this study, we report the synthesis of a new cubic neodymium-rhenium metallic alloy NdRe 2 through the utilization of high pressure and laser heating in a diamond anvil cell. NdRe 2 crystallizes in the Fd$\overline{3}$m space group with a lattice parameter equal to 7.486 (2) Å and Z = 8 at 24 (1) GPa and 2,200 (100) K. It was studied using high-pressure single-crystal X-ray diffraction. The compound crystallizes in the cubic MgCu 2 structure type. Its successful synthesis further proves that high-pressure high-temperature conditions can be used to obtain alloys holding a Laves phase structure. Ab initio calculations were done to predict the mechanical properties of the material. We also discuss the usage of extreme conditions to synthesize and study materials present in the nuclear waste.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

On the New Oxyarsenides Eu 5 Zn 2 As 5 O and Eu 5 Cd 2 As 5 O

The new quaternary phases Eu5Zn2As5O and Eu5Cd2As5O have been synthesized by metal flux reactions and their structures have been established through single-crystal X-ray diffraction. Both compounds crystallize in the centrosymmetric space group Cmcm (No. 63, Z = 4; Pearson symbol oC52), with unit cell parameters a = 4.3457(11) Å, b = 20.897(5) Å, c = 13.571(3) Å; and a = 4.4597(9) Å, b = 21.112(4) Å, c = 13.848(3) Å, for Eu5Zn2As5O and Eu5Cd2As5O, respectively. The crystal structures include one-dimensional double-strands of corner-shared MAs4 tetrahedra (M = Zn, Cd) and As–As bonds that connect the tetrahedra to form pentagonal channels. Four of the five Eu atoms fill the space between the pentagonal channels and one Eu atom is contained within the channels. An isolated oxide anion O2– is located in a tetrahedral hole formed by four Eu cations. Applying the valence rules and the Zintl concept to rationalize the chemical bonding in Eu5M2As5O (M = Zn, Cd) reveals that the valence electrons can be counted as follows: 5 × [Eu2+] + 2 × [M2+] + 3 × [As3–] + 2 × [As2–] + O2–, which suggests an electron-deficient configuration. The presumed h+ hole is confirmed by electronic band structure calculations, where a fully optimized bonding will be attained if an additional valence electron is added to move the Fermi level up to a narrow band gap (Eu5Zn2As5O) or pseudo-gap (Eu5Cd2As5O). In order to achieve such a formal charge balance, and hence, narrow-gap semiconducting behavior in Eu5M2As5O (M = Zn, Cd), europium is theorized to be in a mixed-valent Eu2+/ Eu3+ state.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ba5Sb8: The Highest Homologue of the Family of Binary Semiconducting Barium Antimonides BanSb2n−2 (n ≥ 2)

A novel binary compound within the Ba–Sb phase diagram, Ba5Sb8, was synthesized by combining elements with an excess of Sb in an alumina crucible. Structural elucidation was performed using single-crystal X-ray diffraction. This compound crystallizes in the orthorhombic space group Fdd2 with unit cell parameters of a = 15.6568(13) Å, b = 35.240(3) Å, c = 6.8189(6) Å, adopting its own structure type. The most distinctive features of the structure are the eight-membered [Sb8]10− polyanionic fragments which have no known precedents among antimonides. They are separated by five Ba2+ cations, which afford the charge balance and enable adherence to the Zintl–Klemm formalism. Ba5Sb8 is the highest known member of the homologous series within the family of barium antimonides BanSb2n−2 (n ≥ 2), all of which boast anionic substructures with oligomeric moieties of pnictogen atoms with varied lengths and topologies. Electronic structure calculations indicate an indirect narrow bandgap of ca. 0.45 eV, which corroborates the valence-precise chemical bonding in Ba5Sb8.

Samarakoon, S. M. Gayomi K.↗
DOE OSTI2024

Large Angle Rocking Beam Electron Diffraction Utilizing Electron Direct Detector

Electron diffraction of a crystal is fundamentally a function of the potential of that crystal. The intensity of electron diffraction patterns is, as a result, sensitive to the charge density of atoms and bonding inside crystals. Experimentally, the traditional method to probe this information is quantitative Convergent Beam Electron Diffraction (CBED). Quantitative CBED or QCEBD is a method which uses dynamic diffraction theory to quantify CBED intensities and to extract information about crystal structure and bonding. The sensitivity of dynamical scattering is leveraged to measure crystal symmetry and crystal structure factors. At its limit, electron structure factors are measured at high accuracy allowing access to chemical bonding information, which corroborate theoretical calculations through multipole model refinements of the experimental charge density. The primary limit to QCBED is the requirement of a non-overlapping convergent beam. This subsequently limits QCBED to crystals with small unit cells which are stable under the focused probe.

Busch, Robert↗
DOE OSTI2020

A-type antiferromagnetic order in MnBi 4 Te 7 and MnBi 6 Te 10 single crystals

MnBi 4 Te 7 and MnBi 6 Te 10 are two members with n = 2 and 3 in the family of MnBi 2 n Te 3 n + 1 where the n = 1 member, MnBi 2 Te 4 , has been intensively investigated as the first intrinsic antiferromagnetic topological insulator. In this work, we report the A-type antiferromagnetic order in these two compounds by measuring magnetic properties, electrical and thermal transport, specific heat, and single-crystal neutron diffraction. Both compounds order into an A-type antiferromagnetic structure as does MnBi 2 Te 4 with ferromagnetic planes coupled antiferromagnetically along the crystallographic c axis. While no evidence for any in-plane ordered moment is found for MnBi 2 Te 4 or MnBi 6 Te 10 , weak reflections at half- L positions along the [0 0 L ] direction are observed for MnBi 4 Te 7 suggesting an in-plane ordered moment around 0.15 μ B / Mn . The ordering temperature, T N , is 13 K for MnBi 4 Te 7 and 11 K for MnBi 6 Te 10 . The magnetic order is also manifested in the anisotropic magnetic properties. Furthermore, for both compounds, the interlayer coupling is weak and a spin-flip transition occurs when a magnetic field of around 1.6 kOe is applied along the c axis at 2 K. As observed in MnBi 2 Te 4 , when cooling across T N , no anomaly was observed in the temperature dependence of thermopower. On the other hand, critical scattering effects are observed in thermal conductivity although the effect is less pronounced than that in MnBi 2 Te 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Anisotropic magnetism of the Shastry-Sutherland lattice material BaNd 2 PtO 5

For this work, single crystals were grown and characterized to investigate the physical properties and magnetic ground state of BaNd 2 PtO 5 , a candidate to host physics of the Shastry-Sutherland model. Analysis of single crystal x-ray diffraction data yields an updated crystal structure, similar to the prior report but now in space group P4/mbm. Magnetization and specific heat measurements reveal an antiferromagnetic transition at T N =1.9K and a large magnetic anisotropy with in-plane magnetization much larger than out-of-plane magnetization. Single crystal neutron diffraction at zero field reveals a propagation vector of ($\frac{1}{2}$$\frac{1}{2}$$\frac{1}{2}$) for the magnetic ground state as compared to the ($\frac{1}{2}$$\frac{1}{2}$0) wave vector observed in the related body-centered material BaNd 2 ZnO 5 . The ground state is found to be a fully compensated antiferromagnet with diffraction data well fitted within the magnetic space group P S –1 (BNS setting #2.7). The ordered moment is mostly in the basal plane with nearest neighbors forming ferromagnetic dimers, however it also has a finite out-of-plane component unlike the related easy-plane materials BaNd 2 ZnO 5 and BaNd 2 ZnS 5 . Field-induced transitions are observed below T N when the field is applied within the basal plane, and in-plane anisotropy of the associated critical fields is observed. The magnetization is strongly impacted by misalignment of the field away from high symmetry directions. These results suggest complex magnetic structures may arise in the field-induced states, and they highlight the need for extreme care when studying this and related Shastry-Sutherland materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Complex spin structure in co-trimer-chain Li 2 Co 3 Se 4 O 12

Complex magnetic materials are extremely attractive for revealing unconventional spin states and novel magnetic excitations. Here, we report the structural, thermodynamic, and magnetic properties of a novel magnetic material Li 2 Co 3 Se 4 O 12 based on x-ray and neutron diffraction, specific heat, magnetization, and x-ray photoelectron spectroscopy measurements. X-ray and neutron diffraction refinements reveal two Co sites Co (1) and Co (2) even though both are in the octahedral environment. While they are not connected along the b and c directions, these octahedra are edge-shared forming the Co (2) – Co (1) – Co (2) trimer chain along the a direction. The magnetic susceptibility exhibits the Curie-Weiss (CW) temperature dependence at high temperatures (above ∼50 K) with the negative CW temperature, a dip centered at T ⁎ ∼ 8.0 K, and an antiferromagnetic transition at T N = 3.3 K. The specific heat confirms that there is a phase transition at T N and a hump at T ⁎ . The long-range magnetic transition at T N implies that, in addition to the intra-chain interaction, there is strong inter-chain interaction, which is likely due to polarized SeO 3 bridging between chains. Single crystal neutron diffraction refinement reveals a complex magnetic structure with the angle between Co (1) and Co (2) moments ∼105°. Within the Co (2) – Co (1) – Co (2) trimer, two Co (2) moments are parallelly aligned. Surprisingly, the Co (1) moment (1.92μB) is only half of the Co (2) moment (3.96μB). There is likely the spin-state change for Co (1) from the high-spin state at T > T ⁎ to the low-spin state at T < T ⁎ , causing a dip in the magnetic susceptibility and a hump in the specific heat. When the magnetic field is applied, multiple metamagnetic transitions are found in all directions, implying field-driven magnetic excitations. Our results demonstrate rich magnetic properties of Li 2 Co 3 Se 4 O 12 that are sensitive to the external stimuli such as the magnetic field.

Antiferromagnetism↗
DOE OSTI2022

Entanglement of Square Nets in Covalent Organic Frameworks

Herein, two entangled 2D square covalent organic frameworks (COFs) have been synthesized from 4,4',4'',4'''-(9,9'-spirobi[fluorene]-2,2',7,7'-tetrayl)-tetrabenzaldehhyde (SFTB) and p -phenylenediamine (PPA) and benzidine (BZD) to form COF-38, [(SFTB)(PPA) 2 ] imine , and its isoreticular form COF-39, [(SFTB)(BZD) 2 ] imine . We also report the single-crystal electron diffraction structure of COF-39 and find that it is composed of mutually entangled 2D square nets ( sql ). These COFs represent the first examples of entangled 2D COF structures, which, as we illustrate, were made possible by our strategy of using the distorted tetrahedral SFTB building unit. SFTB overcomes the propensity of 2D COFs to stack through π-π stacking and allows entanglements to form. This work significantly adds to the design principles of COFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Bent Laue crystal anatomy: new insights into focusing and energy-dispersion properties

X-ray Laue-type monochromators are common and essential optical components at many high-power X-ray facilities, e.g. synchrotron facilities. The X-ray optics of bent Laue crystals is a well developed area. An incident X-ray beam penetrating a bent Laue crystal will result in a diffracted beam with different angles and energies. There is a need for a way of organizing the rays that allows one to sort out the energy and spatial properties of the diffracted beam. The present work introduces a new approach for describing the general behaviour of bent Laue crystals from a ray-tracing point of view. This quasi-monochromatic beam approach provides an intuitive view of bent-crystal diffraction and leads to deeper understanding. It explains the energy and spatial properties of common and special cases of bent Laue optics, predicts phenomena that can improve energy-dispersion-related X-ray imaging techniques and provides a theoretical framework that makes ray-tracing simulation easier to realize.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The Modulated Crystal Structure of K 2 V 3 O 8

Weak lattice distortions can tune exchange pathways and magnetic interactions in square-lattice quantum magnets. K 2 V 3 O 8 is a mixed valence (V 4+ /V 5+ ) fresnoite oxide that exhibits strong spin–lattice coupling at low temperature. Here, we combine single-crystal neutron diffraction (90 K) and laboratory X-ray diffraction (50 K) to solve the low-temperature structure as an orthorhombic (3 + 1)D incommensurately modulated phase in superspace group Cmm2(β,0,1/2)0s0 [No. 196]. What initially appeared as two independent modulation vectors, q 1 = 0.3132(6)[$110$] + 1/2c* and q 2 = 0.3132(6)[$1\bar{10}$] + 1/2c*, are more naturally described as a single one-dimensional modulation wave q = 0.626(1)a* + 1/2c* in a C-centered orthorhombic lattice, related to the parent tetragonal cell by the transformation a + b, −a + b, c. Refinement with a 4-fold rotational twin inherited from the P4bm parent structure solves oxygen-dominated framework distortions and K + displacements. A de Wolff section (t = 0.40) enables a symmetry-mode decomposition, identifying three dominant mm2 (C 2v ) modes: GM3 for framework tilt, A5 for interlayer shear, and Z5 for c-axis breathing. The mode-resolved structure provides a unified, symmetry-based explanation for reported low-temperature Raman and IR anomalies and clarifies the structural origin of the spin–lattice coupling in the S = 1/2 two-dimensional quantum spin compound.

K2V3O8↗
DOE OSTI2022

Developing CdTe homojunctions applying high throughput deposition

In this project, we attempted to make CdTe homojunctions using single crystal p-type doped substrates and closed-space sublimation epitaxy (CSSE) n-type doped films. The project included modeling which determined the ideal thickness for the n-type layer as being <200 nm. Boules of high concentration indium-doped CdTe and CdSe 0.4 Te 0.6 (CST) were grown using modified vertical Bridgman (MVB) methods. Similarly, iodine-doped CdTe crystals were grown for the first time. Washington State University (WSU) stock phosphorus-doped CdTe was used as the p-type substrate layer. The crystals were characterized by Hall effect and time-resolved photoluminescence (TRPL, for electrical properties), photoluminescence microscopy (for uniformity), X-ray diffraction (for crystal structure), and glow discharge mass spectrometry (GDMS, for dopant and impurity concentration). CdTe:I crystals were also characterized by visible and infrared transmission measurements, and various Cd or Te heat treatments were performed to assess changes in optical and electrical properties. The grown n-type materials – CdTe:In, CdSe0.4Te0.6:In, and CdTe:I – were provided to the National Renewable Energy Laboratory (NREL) for growth of CSSE thick films for characterization by two photon TRPL (for carrier lifetime), electron back-scatter diffraction (EBSD, to assess epitaxy), and Hall effect. Several measurements of secondary ion mass spectroscopy (SIMS) were performed. Nearly 100% of the indium from the crystal was incorporated into the measured thick films, while only ~2-22% of the iodine from the crystal was incorporated. The net result of the diffusion issue is that homojunction devices created using CSSE have a buried homojunction, as indicated by the near infrared peak in the external quantum efficiency (EQE). Various parameterization of front and back contacts suggested that the poor device performance was primarily a result of this buried junction and not due to other effects. There may also be an issue with the CSSE film lifetime in addition to the dopant profile.

14 SOLAR ENERGY↗
DOE OSTI2024

Structural studies of intrinsically disordered MLL -fusion protein AF9 in complex with peptidomimetic inhibitors

AF9 (MLLT3) and its paralog ENL(MLLT1) are members of the YEATS family of proteins with important role in transcriptional and epigenetic regulatory complexes. These proteins are two common MLL fusion partners in MLL -rearranged leukemias. The oncofusion proteins MLL-AF9/ENL recruit multiple binding partners, including the histone methyltransferase DOT1L, leading to aberrant transcriptional activation and enhancing the expression of a characteristic set of genes that drive leukemogenesis. The interaction between AF9 and DOT1L is mediated by an intrinsically disordered C-terminal ANC1 homology domain (AHD) in AF9, which undergoes folding upon binding of DOT1L and other partner proteins. We have recently reported peptidomimetics that disrupt the recruitment of DOT1L by AF9 and ENL, providing a proof-of-concept for targeting AHD and assessing its druggability. Intrinsically disordered proteins, such as AF9 AHD, are difficult to study and characterize experimentally on a structural level. In this study, we present a successful protein engineering strategy to facilitate structural investigation of the intrinsically disordered AF9 AHD domain in complex with peptidomimetic inhibitors by using maltose binding protein (MBP) as a crystallization chaperone connected with linkers of varying flexibility and length. The strategic incorporation of disulfide bonds provided diffraction-quality crystals of the two disulfide-bridged MBP–AF9 AHD fusion proteins in complex with the peptidomimetics. These successfully determined first series of 2.1–2.6 Å crystal complex structures provide high-resolution insights into the interactions between AHD and its inhibitors, shedding light on the role of AHD in recruiting various binding partner proteins. We show that the overall complex structures closely resemble the reported NMR structure of AF9 AHD/DOT1L with notable difference in the conformation of the β-hairpin region, stabilized through conserved hydrogen bonds network. These first series of AF9 AHD/peptidomimetics complex structures are providing insights of the protein–inhibitor interactions and will facilitate further development of novel inhibitors targeting the AF9/ENL AHD domain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Economical Laue x-ray diffraction using photographic film and orientation of single crystals

Many Laue x-ray diffraction systems using the Polaroid XR-7 Land Diffraction Cassette camera became inactive after production of the required high sensitivity Polaroid T-57 instant film ceased. This Tutorial reports on a low-cost solution using the readily available replacement film with push processing to increase the effective film speed. The use of this film in the polaroid camera is described along with film development and digitization. The orientation of single crystals with the obtained data and free software is explained. A simple method to prepare single crystals with surfaces perpendicular to a desired crystallographic orientation is described. The content of this Tutorial may prove beneficial for educational and research laboratories.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Framework Short-Range Order Observed in a Spinel-Type Li Superionic Conductor

Solid-state superionic conductors are characterized by rich structural disorders. Though structural complexities are central to their functionalities, they often give rise to short-range order that eludes detection by conventional diffraction-based techniques and is thus overlooked in establishing precise structure-property relationships. In this work, we synthesized single crystals of a recently discovered lithium (Li) superionic conductor Li16.2(1)In9.00(2)Sn1.10(1)O23.8 (LISO) for in-depth characterizations of structural subtleties. LISO exhibits an unusual spinel-like phase with significant Li overstoichiometry and a face-sharing Li network. Single-crystal neutron diffraction confirms significant Li disorder, as manifested in Li site splitting and partial occupancy. More importantly, synchrotron diffuse scattering combined with 3D-ΔPDF analysis and Monte Carlo simulations reveal short-range order in the nonalkali framework that might contribute to the phase stability and ionic conductivity. This work showcases an example in which subtle local energetics can be directly visualized in structurally disordered ionic conductors.

Chen, Yu↗
DOE OSTI2025

Synthesis and Characterization of Metastable Cobalt Honeycomb KCoAsO 4

The Kitaev model has served as a long-sought-after target in the realization of a quantum spin liquid that could host Majorana Fermions. Such non-Abelian anyons could revolutionize quantum computing if properly implemented to overcome decoherence. A 3d 7 electronic configuration, like Co 2+ , has been explored by theory and experimental work to design Kitaev materials. Here, in this study, we report the synthesis of a new cobaltate honeycomb material KCoAsO 4 . The compound is synthesized through a low-temperature solution route and crystallized in space group R¯3 with lattice parameters a = 5.0394(1) and c = 28.6790(1) as determined by neutron powder diffraction. The crystal structure follows motifs similar to those of the honeycomb compound BaCo2(AsO 4 ) 2 but presents differing magnetic behavior. Magnetization/heat capacity measurements on the powder show antiferromagnetic transition T N = 14 K. Two lower-temperature transitions are present in susceptibility at low field that resemble spin reorientations. Magnetization data as a function of field have curvature indicative of metamagnetic behavior below the magnetic ordering temperature, with the magnetic ordering suppressed upon application of a higher magnetic field. Computational studies suggest the presence of a weak nearest-neighbor Kitaev term, K 1 , consistent with related honeycomb cobaltates. Together, the data suggest that this material should present a new platform for developing Kitaev quantum spin liquids.

cobaltate↗