SEARCH · Search NASA

Results for “crystal twisting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Defect redistribution along grain boundaries in SrTiO 3 by externally applied electric fields

During thermal annealing at 1425 °C nominal electric field strengths of 50 V/mm and 150 V/mm were applied along the grain boundary planes of a near 45° (100) twist grain boundary in SrTiO 3 . Electron microscopy characterization revealed interface expansions near the positive electrode around 0.8 nm for either field strength. While the interface width decreased to roughly 0.4 nm after annealing at 50 V/mm, the higher field strength caused decomposition of the boundary structure close to the negative electrode. Electron energy-loss and X-ray photoelectron spectroscopies demonstrated an increased degree of oxygen sublattice distortion at the negative electrode side, and enhanced concentrations of Ti 3+ and Ti 2+ compared to bulk for both single crystals and bicrystals annealed with an external electric field, respectively. Oxygen migration due to the applied electric field causes the observed alteration of grain boundary structures. At sufficiently high field strength the agglomeration of anion vacancies may lead to the decomposition of the grain boundary.

36 MATERIALS SCIENCE↗

NASA NTRS1979

Homogeneous alignment of nematic liquid crystals by ion beam etched surfaces

A wide range of ion beam etch parameters capable of producing uniform homogeneous alignment of nematic liquid crystals on SiO2 films are discussed. The alignment surfaces were generated by obliquely incident (angles of 5 to 25 deg) argon ions with energies in the range of 0.5 to 2.0 KeV, ion current densities of 0.1 to 0.6 mA sq cm and etch times of 1 to 9 min. A smaller range of ion beam parameters (2.0 KeV, 0.2 mA sq cm, 5 to 10 deg and 1 to 5 min.) were also investigated with ZrO2 films and found suitable for homogeneous alignment. Extinction ratios were very high (1000), twist angles were small ( or = 3 deg) and tilt-bias angles very small ( or = 1 deg). Preliminary scanning electron microscopy results indicate a parallel oriented surface structure on the ion beam etched surfaces which may determine alignment.

Wintucky, E. G.↗

DOE OSTI2025

Classification of fragile topology enabled by matrix homotopy

Flat bands in twisted materials have attracted considerable attention due to the emergence of correlated phases that can be associated with the non-Wannier-representable nature of its single-particle states. Specifically, these bands can exhibit a class of topology that can be nullified by the addition of trivial bands, termed fragile topology, which has required an expansion of prior classification schemes. However, existing approaches for predicting fragile topology rely on momentum-space methods, e.g., Wilson loops, presenting a fundamental challenge for using fragile topology as a predictor of correlated phases in aperiodic systems, such as incommensurate twist angles in moiré materials. Here, we develop a ℤ 2 energy-resolved topological marker for classifying fragile phases using a system’s position-space description, enabling the direct classification of finite, disordered, and aperiodic materials. By translating the physical symmetries protecting the system’s fragile topological phase into matrix symmetries of the system’s Hamiltonian and position operators, we use matrix homotopy to construct our topological marker while simultaneously yielding a quantitative measure of topological robustness. We demonstrate our framework’s effectiveness in both a low-energy tight-binding model and a continuum photonic crystal model of 𝐶 2 ⁢𝒯-symmetric systems, and find that fragile topology can both persist under strong disorder and even exhibit disorder-induced reentrant phase transitions. Our photonic crystal results also demonstrate the robustness of fragile topology, and the applicability of our approach, to heterostructures lacking a bulk spectral gap. Overall, our framework serves as an efficient tool for elucidating fragile topology, offering guidance for the prediction and discovery of correlated phases in both crystalline and aperiodic materials.

Lee, Ki Young [Sandia National Laboratories (SNL-N↗

DOE OSTI2021

Resonance-Enhanced Excitation of Interlayer Vibrations in Atomically Thin Black Phosphorus

The strength of interlayer coupling critically affects the physical properties of 2D materials such as black phosphorus (BP), where the electronic structure depends sensitively on layer thickness. Rigid-layer vibrations reflect directly the interlayer coupling strength in 2D van der Waals solids, but measurement of these characteristic frequencies is made difficult by sample instability and small Raman scattering cross sections in atomically thin elemental crystals. Here, we overcome these challenges in BP by performing resonance-enhanced low-frequency Raman scattering under an argon-protective environment. Interlayer breathing modes for atomically thin BP were previously unobservable under conventional (nonresonant) excitation but became strongly enhanced when the excitation energy matched the sub-band electronic transitions of few-layer BP, down to bilayer thicknesses. The measured out-of-plane interlayer force constant was found to be 10.1 × 10 19 N/m 3 in BP, which is comparable to graphene. Accurate characterization of the interlayer coupling strength lays the foundation for future exploration of BP twisted structures and heterostructures.

interlayer interaction↗

DOE OSTI2024

DNA-mediated assembly of Au bipyramids into anisotropic light emitting kagome superlattices

Colloidal crystal engineering with DNA allows one to design diverse superlattices with tunable lattice symmetry, composition, and spacing. Most of these structures follow the complementary contact model, maximizing DNA hybridization on building blocks and producing relatively close-packed lattices. Here, low-symmetry kagome superlattices are assembled from DNA-modified gold bipyramids that can engage only in partial DNA surface matching. The bipyramid dimensions and DNA length can be engineered for two different superlattices with rhombohedral unit cells, including one composed of a periodic stacking of kagome lattices. Enabled by the partial facet alignment, the kagome lattices exhibit lattice distortion, bipyramid twisting, and planar chirality. When conjugated with Cy-5 dyes, the kagome lattices serve as cavities with high-density optical states and large Purcell factors along lateral directions, leading to strong dipole radiation along thezaxis and facet-dependent light emission. Such complex optical properties make these materials attractive for lasers, displays, and quantum sensing constructs.

Science & Technology - Other Topics↗

DOE OSTI2024

From +I to +IV, Alkalis to Actinides: Capturing Cations across the Periodic Table with Keggin Polyoxometalate Ligands

Coordination chemistry trends across the periodic table are often difficult to probe experimentally due to limitations in finding a versatile but consistent chelating platform that can accommodate various elements without changing its coordination mode. Herein, we present new metal/ligand systems covering a wide range of ionic radii, charges, and elements. Five different ligands derived from the Keggin structure (HBW 11 O 39 8– , PW 11 O 39 7– , SiW 11 O 39 8– , GeW 11 O 39 8– , and GaW 11 O 39 9– ) were successfully crystallized with six different cations (Na + , Sr 2+ , Ba 2+ , La 3+ , Ce 4+ , and Th 4+ ) and characterized by single-crystal X-ray diffraction. Twenty-five new compounds were obtained by using Cs + as the counterion, yielding a consistent base formula of Cs x [M(XW 11 O 39 ) 2 ]·nH 2 O. Despite having a similar first-coordination sphere geometry (i.e., 8-coordinated), the nature of the central cation was found to impact the long-range geometry of the complexes. This unique crystallographic data set shows that, despite the traditional consensus, the local geometry of the cation (i.e., metal–oxygen bond distance) is not enough to depict the full impact of the complexed metal ion. The bending and twisting of the complexes, as well as ligand–ligand distances, were all impacted by the nature of the central cation. We also observed that counterions play a critical role by stabilizing the geometry of the M(XW 11 ) 2 complex and directing complex–complex interactions in the lattice. We also define certain structural limits for this type of complex, with the large Ba 2+ ion seemingly approaching those limits. Finally, this study thus lays the foundation for capturing the coordination chemistry of other rarer elements across the periodic table such as Ra 2+ , Ac 3+ , Bk 4+ , Cf 3+ , etc.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Hofstadter states and re-entrant charge order in a semiconductor moiré lattice

The emergence of moiré materials with flat bands provides a platform to systematically investigate and precisely control correlated electronic phases. Here, we report local electronic compressibility measurements of a twisted WSe2/MoSe2 heterobilayer which reveal a rich phase diagram of interpenetrating Hofstadter states and electron solids. We show that this reflects the presence of both flat and dispersive moiré bands whose relative energies, and therefore occupations, are tuned by density and magnetic field. At low densities, competition between moiré bands leads to a transition from commensurate arrangements of singlets at doubly occupied sites to triplet configurations at high fields. Hofstadter states (i.e., Chern insulators) are generally favored at high densities as dispersive bands are populated, but are suppressed by an intervening region of reentrant charge-ordered states in which holes originating from multiple bands cooperatively crystallize. Our results reveal the key microscopic ingredients that favor distinct correlated ground states in semiconductor moiré systems, and they demonstrate an emergent lattice model system in which both interactions and band dispersion can be experimentally controlled.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Understanding the deformation mechanisms in Ni-based superalloys with using crystal plasticity finite element method

Nl-based superalloy is considered as a good candidate due to its excellent resistance to elevated temperature deformation for long term period application. Understanding the deformation and failure mechanisms of Ni-Based superalloys is very helpful for providing design guidelines for processing Ni-based superalloys. Experimental characterization indicates that the deformation mechanisms of Ni based superalloy is strongly microstructure dependent. Besides, damage transform from the void nucleation to the macro cracks by voids growth leading to the failure of the Ni-based superalloys are also showing strong microstructure sensitivity. Therefore, this work focuses on the prediction and comprehension of the deformation and void growth behavior in Ni based superalloy at different working conditions via crystal plasticity finite element modeling and simulation. Physically based crystal plasticity frameworks were developed for newly Ni- based superalloy Haynes 282. It was found that dislocation shearing through the precipitates were acting as the main contributor to the strength of Haynes 282 at room temperature and 815°C. Our analysis of the creeping behavior of Haynes 282 exhibited that resistance of general climb replaced by the resistance induced by the deposited climb dislocation density. In addition, in the study of void growth behavior, our simulation results demonstrated that as the main loading axis perpendicular to the grain boundary (GB), voids grow more slowly on tilt GBs in bicrystals than those in single and bicrystals with twist GBs. And tilt GBs would promote the void grow into irregular shape.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Electronic structures, charge transfer, and charge order in twisted transition metal dichalcogenide bilayers

Moiré superlattices of transition metal dichalcogenide (TMD) bilayers have been shown to host correlated electronic states, which arise from the interplay of long wavelength moiré potential and long-range Coulomb interaction. Here, we theoretically investigate structural relaxation and single-particle electronic structure of twisted TMD homobilayer. From the large-scale density functional theory calculation and continuum model with layer degrees of freedom, we find that the out-of-plane gating field creates a tunable charge transfer gap at the Dirac point between the first and second moiré valence bands. We further study the charge orders at the fractional band fillings. In the flat band limit, we find from Monte Carlo simulations a series of charge-ordered insulating states at various fillings $n = \frac{1}{4}, \frac{1}{3}, \frac{1}{2}, \frac{2}{3}, 1$. Further, we predict that gating field induces a phase transition between different electron crystals at fixed filling $n = \frac{1}{2}$ or $\frac{2}{3}$. At half-filling $\textit{n} = 1$, the ground state is a Mott insulator with electronically driven ferroelectricity. This work demonstrates that TMD homobilayer provides a powerful platform for the investigation of tunable charge transfer insulator and charge orders.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Cellulose assembles into helical bundles of uniform handedness in cell walls with abnormal pectin composition

Plant cells and organs grow into a remarkable diversity of shapes, as directed by cell walls composed primarily of polysaccharides such as cellulose and multiple structurally distinct pectins. The properties of the cell wall that allow for precise control of morphogenesis are distinct from those of the individual polysaccharide components. For example, cellulose, the primary determinant of cell morphology, is a chiral macromolecule that can self-assemble in vitro into larger-scale structures of consistent chirality, and yet most plant cells do not display consistent chirality in their growth. One interesting exception is the Arabidopsis thaliana rhm1 mutant, which has decreased levels of the pectin rhamnogalacturonan-I and causes conical petal epidermal cells to grow with a left-handed helical twist. Here, we show that in rhm1 the cellulose is bundled into large macrofibrils, unlike the evenly distributed microfibrils of the wild type. This cellulose bundling becomes increasingly severe over time, consistent with cellulose being synthesized normally and then self-associating into macrofibrils. We also show that in the wild type, cellulose is oriented transversely, whereas in rhm1 mutants, the cellulose forms right-handed helices that can account for the helical morphology of the petal cells. Furthermore, our results indicate that when the composition of pectin is altered, cellulose can form cellular-scale chiral structures in vivo, analogous to the helicoids formed in vitro by cellulose nano-crystals. We propose that an important emergent property of the interplay between rhamnogalacturonan-I and cellulose is to permit the assembly of nonbundled cellulose structures, providing plants flexibility to orient cellulose and direct morphogenesis.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Roses in the nonperturbative current response of artificial crystals

In two-dimensional artificial crystals with large real-space periodicity, the nonlinear current response to a large applied electric field can feature a strong angular dependence, which encodes information about the band dispersion and Berry curvature of isolated electronic Bloch minibands. Within the relaxation-time approximation, we obtain analytic expressions up to infinite order in the driving field for the current in a band-projected theory with time-reversal and trigonal symmetry. For a fixed field strength, the dependence of the current on the direction of the applied field is given by rose curves whose petal structure is symmetry constrained and is obtained from an expansion in real-space translation vectors. We illustrate our theory with calculations on periodically buckled graphene and twisted double bilayer graphene, wherein the discussed physics can be accessed at experimentally relevant field strengths.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Thermal relaxation of strain and twist in ferroelectric hexagonal boron nitride moiré interfaces

New properties can arise at van der Waals (vdW) interfaces hosting a moiré pattern generated by interlayer twist and strain. However, achieving precise control of interlayer twist/strain remains an ongoing challenge in vdW heterostructure assembly, and even subtle variation in these structural parameters can create significant changes in the moiré period and emergent properties. Characterizing the rate of interlayer twist/strain relaxation during thermal annealing is critical to establish a thermal budget for vdW heterostructure construction and may provide a route to improve the homogeneity of the interface or to control its final state. Here, we characterize the spatial and temporal dependence of interfacial twist and strain relaxation in marginally-twisted hBN/hBN interfaces heated under conditions relevant to vdW heterostructure assembly and typical sample annealing. We find that the ferroelectric hBN/hBN moiré at very small twist angles (θ ≤ 0.1°) relaxes minimally during annealing in air at typical assembly temperatures of 170°C. However, at 400°C, twist angle relaxes significantly, accompanied by a decrease in spatial uniformity. Uniaxial heterostrain initially increases and then decreases over time, becoming increasingly non-uniform in direction. Structural irregularities such as step edges, contamination bubbles, or contact with the underlying substrate result in local inhomogeneity in the rate of relaxation.

2D materials↗

DOE OSTI2023

The Crystal Structure of BaZn 2 Se 2 (OH) 2 Featuring Brownmillerite‐Type Layers

Abstract A bimetallic hydroxychalcogenide, BaZn 2 Se 2 (OH) 2 , was synthesized through hydrothermal pouch methods. The single crystal X‐ray diffraction and electron diffraction indicates that the phase crystallizes in the orthorhombic space group Pnma and is composed of anionic layers [ZnSe 3/3 (OH) 1/1 ] − that are separated and charged balanced by Ba 2+ cations. The [ZnSe 3/3 (OH) 1/1 ] – layer comprises two unique Zn sites, which form interpenetrating zigzag chains with an in‐plane dipole moment and adopts a brownmillerite‐type structural motif. The adjacent layers contain tetrahedrally coordinated Zn chains of opposite handedness related by an inversion center, which cancel the microscopic dipoles to minimize the macroscopic electric polarization. The adoption of a brownmillerite structural motif in BaZn 2 Se 2 (OH) 2 can be rationalized by the distinct charge difference between Se 2− and OH − anions, which creates a sufficient dipole moment in the ZnSe 3 (OH) tetrahedra to allow the occurrence of twisted chains. FTIR spectroscopy confirms the existence of OH − anions and DFT calculations indicate that BaZn 2 Se 2 (OH) 2 is a semiconductor with a direct band gap. This work expands the chemistry of the brownmillerite family from traditional homoanionic oxides to multianion hydroxychalcogenides, offering a new opportunity to explore tunable structural complexity for better design of functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2009

All-Solid-State UV Transmitter Development for Ozone Sensing Applications

In this paper, recent progress made in the development of an all-solid-state UV transmitter suitable for ozone sensing applications from space based platforms is discussed. A nonlinear optics based UV setup based on Rotated Image Singly Resonant Twisted Rectangle (RISTRA) optical parametric oscillator (OPO) module was effectively coupled to a diode pumped, single longitudinal mode, conductively cooled, short-pulsed, high-energy Nd:YAG laser operating at 1064 nm with 50 Hz PRF. An estimated 10 mJ/pulse with ~10% conversion efficiency at 320 nm has been demonstrated limited only by the pump pulse spatial profile. The current arrangement has the potential for obtaining greater than 200 mJ/pulse. Previously, using a flash-lamp pumped Nd:YAG laser with round, top-hat profile, up to 24% IR-UV conversion efficiency was achieved with the same UV module. Efforts are underway to increase the IR-UV conversion efficiency of the all solid-state setup by modifying the pump laser spatial profile along with incorporating improved OPO crystals.

Prasad, Narasimha S.↗

DOE OSTI2025

Low Frequency Vibrational Modes of Two-Dimensional Lead-Free Metal Halide Double Perovskites

2D layered double perovskites of (S-MPA) 4 AgBiI 8 (MPA-AgBiI 8 ) and (S-MPA) 4 CuBiI 8 (MPA-CuBiI 8 ) (S-MPA, S-β-methylphenethylammonium) were synthesized with a hydrothermal method. The crystal structure of MPA-AgBiI 8 was determined using single-crystal X-ray diffraction (scXRD). Powder XRD (pXRD) data suggest that the crystal structure of MPA-CuBiI 8 is more complex than that of MPA-AgBiI 8 . UV-Vis electronic absorption spectra of these perovskites reveal a bandgap of 2.03 eV for both. Short exciton lifetime from time-resolved photoluminescence (TRPL) results and low PL intensity of the Cu-based perovskite suggest a high density of trap states within the bandgap. Low frequency Raman spectra of both materials show distinct peaks and a slightly higher frequency for the Cu-based perovskite than the Ag-based perovskite. Density functional theory (DFT) calculations were conducted to simulate the low frequency Raman spectra and help explain the different phonon modes, which are collective vibrations of metal halide bond bending and stretching within the Ag- and Cu-centered octahedra coupled with MPA libration and twisting within the inorganic layer. The DFT theory also quantified octahedral distortions in the two perovskites. Furthermore, this combined experimental and computational study provides new insights into the low frequency vibrations of 2D perovskites.

Halogens↗

DOE OSTI2024

Approach and rotation of reconnecting topological defect lines in liquid crystal

Topological defects are a universal concept across many disciplines, such as crystallography, liquid-crystalline physics, low-temperature physics, cosmology, and even biology. In nematic liquid crystals, topological defects called disclinations have been widely studied. For their three-dimensional (3D) dynamics, however, only recently have theoretical approaches dealing with fully 3D configurations been reported. Further, recent experiments have observed 3D disclination line reconnections, a phenomenon characteristic of defect line dynamics, but detailed discussions were limited to the case of approximately parallel defects. In this paper, we focus on the case of two disclination lines that approach at finite angles and lie in separate planes, a more fundamentally 3D reconnection configuration. Observing and analyzing such reconnection events, we find the square-root law of the distance between disclinations and the decrease of the interdisclination angle over time. We compare the experimental results with theory and find qualitative agreement on the scaling of distance and angle with time, but quantitative disagreement on distance and angle relative mobilities. To probe this disagreement, we derive the equations of motion for systems with reduced twist constant and also carry out simulations for this case. These, together with the experimental results, suggest that deformations of disclinations may be responsible for the disagreement.

36 MATERIALS SCIENCE↗

DOE OSTI2024

High pressure raman spectroscopy and X-ray diffraction of K2Ca(CO3)2 bütschliite: multiple pressure-induced phase transitions in a double carbonate

Abstract The crystal structure and bonding environment of K 2 Ca(CO 3 ) 2 bütschliite were probed under isothermal compression via Raman spectroscopy to 95 GPa and single crystal and powder X-ray diffraction to 12 and 68 GPa, respectively. A second order Birch-Murnaghan equation of state fit to the X-ray data yields a bulk modulus, $${K}_{0}=46.9$$ K 0 = 46.9 GPa with an imposed value of $${K}_{0}^{\prime}= 4$$ K 0 ′ = 4 for the ambient pressure phase. Compression of bütschliite is highly anisotropic, with contraction along the c -axis accounting for most of the volume change. Bütschliite undergoes a phase transition to a monoclinic C 2/ m structure at around 6 GPa, mirroring polymorphism within isostructural borates. A fit to the compression data of the monoclinic phase yields $${V}_{0}=322.2$$ V 0 = 322.2 Å 3 $$,$$ , $${K}_{0}=24.8$$ K 0 = 24.8 GPa and $${K}_{0}^{\prime}=4.0$$ K 0 ′ = 4.0 using a third order fit; the ability to access different compression mechanisms gives rise to a more compressible material than the low-pressure phase. In particular, compression of the C 2/ m phase involves interlayer displacement and twisting of the [CO 3 ] units, and an increase in coordination number of the K + ion. Three more phase transitions, at ~ 28, 34, and 37 GPa occur based on the Raman spectra and powder diffraction data: these give rise to new [CO 3 ] bonding environments within the structure.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Axion-gauge coupling quantization with a twist

The possible couplings of an axion to gauge fields depend on the global structure of the gauge group. If the Standard Model gauge group is minimal, or equivalently if fractionally charged color-singlet particles are forbidden, then the QCD axion’s Chern-Simons couplings to photons and gluons obey correlated quantization conditions. Specifically, the photon coupling can have a fractional part which is a multiple of 1/3, but which is determined by the gluon coupling. A consequence of this result is that, among all theories with a minimal gauge group and minimal axion coupling to gluons, the smallest possible axion-photon amplitude |g aγγ | arises for E/N = 8/3. This provides a new motivation for experiments targeting this axion-photon coupling.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗