SEARCH · Search NASA

Results for “crystal zoning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Float zone experiments in space

The molten zone/freezing crystal interface system and all the mechanisms were examined. If Marangoni convection produces oscillatory flows in the float zone of semiconductor materials, such as silicon, then it is unlikely that superior quality crystals can be grown in space using this process. The major goals were: (1) to determine the conditions for the onset of Marangoni flows in molten tin, a model system for low Prandtl number molten semiconductor materials; (2) to determine whether the flows can be suppressed by a thin oxide layer; and (3) based on experimental and mathematical analysis, to predict whether oscillatory flows will occur in the float zone silicon geometry in space, and if so, could it be suppressed by thin oxide or nitride films. Techniques were developed to analyze molten tin surfaces in a UHV system in a disk float zone geometry to minimize buoyancy flows. The critical Marangoni number for onset of oscillatory flows was determined to be greater than 4300 on atomically clean molten tin surfaces.

Verhoeven, J. D.↗

NASA NTRS2013

Can Supersaturation Affect Protein Crystal Quality?

In quiescent environments (microgravity, capillary tubes, gels) formation of a depletion zone is to be expected, due either to limited sedimentation, density driven convection or a combination of both. The formation of a depletion zone can: Modify solution supersaturation near crystal; Give rise to impurity partitioning. It is conjectured that both supersaturation and impurity partitioning affect protein crystal quality and size. Further detailed investigations on various proteins are needed to assess above hypothesis.

Gorti, Sridhar↗

NASA NTRS1981

Modeling of the float zone process

The interaction of heat, mass, and momentum transport in the floating zone method for growing single crystals from the melt is examined. Methods for detailed numerical simulation of the transport phenomena in a floating zone are developed. Results of the calculations are combined with experiments to determine the effects of solidification induced, surface tension driven, and buoyancy driven convection in establishing dopant redistribution in the melt and the roles of heat transfer in crystal and melt and melt/solid interface shape in determining crystal quality. State of the art finite element techniques were developed for calculating the influence of natural convection in the melt on the shape of a melt/crystal interface and dopant segregation in the crystal. These techniques are demonstrated for solidification by the Bridgman technique. Numerical techniques are developed that calculate the shapes of both the melt/solid and melt/gas interfaces simultaneously with the thermal fields in melt and solid. Models for the fluid flows due to the rotation of the feed and crystal rods are completed and the effects of these flows on dopant segregation are studied, especially in the case of zones longer than can be achieved on Earth.

Brown, R. A.↗

NASA NTRS1996

Structural relations between collagen and mineral in bone as determined by high voltage electron microscopic tomography

Aspects of the ultrastructural interaction between collagen and mineral crystals in embryonic chick bone have been examined by the novel technique of high voltage electron microscopic tomography to obtain three-dimensional information concerning extracellular calcification in this tissue. Newly mineralizing osteoid along periosteal surfaces of mid-diaphyseal regions from normal chick tibiae was embedded, cut into 0.25 microns thick sections, and documented at 1.0 MV in the Albany AEI-EM7 high voltage electron microscope. The areas of the tissue studied contained electron dense mineral crystals associated with collagen fibrils, some marked by crystals disposed along their cylindrically shaped lengths. Tomographic reconstructions of one site with two mineralizing fibrils were computed from a 5 degrees tilt series of micrographs over a +/- 60 degrees range. Reconstructions showed that the mineral crystals were platelets of irregular shape. Their sizes were variable, measured here up to 80 x 30 x 8 nm in length, width, and thickness, respectively. The longest crystal dimension, corresponding to the c-axis crystallographically, was generally parallel to the collagen fibril long axis. Individual crystals were oriented parallel to one another in each fibril examined. They were also parallel in the neighboring but apparently spatially separate fibrils. Crystals were periodically (approximately 67 nm repeat distance) arranged along the fibrils and their location appeared to correspond to collagen hole and overlap zones defined by geometrical imaging techniques. The crystals appeared to be continuously distributed along a fibril, their size and number increasing in a tapered fashion from a relatively narrow tip containing smaller and infrequent crystals to wider regions having more densely packed and larger crystals. Defined for the first time by direct visual 3D imaging, these data describe the size, shape, location, orientation, and development of early crystals in normal bone collagen. The results suggest that platelet-shaped crystals are arranged in channels or grooves which are formed by collagen hole zones in register and that crystal sizes may exceed the dimensions of hole zones. Such data agree with those from mineral-matrix interaction in normally calcifying avian tendon obtained by similar high voltage tomographic means, but in addition they indicate a possible gradual and continuous deposition of crystals in collagen of bone unlike tendon and imply that individual collagen fibrils in local regions of osteoid are organized such that they all may be aligned in a coherent manner.

NASA Discipline Number 40-40↗

NASA NTRS1976

Float-zone processing in a weightless environment

The results were reported of investigations to: (1) test the validity of analyses which set maximum practical diameters for Si crystals that can be processed by the float zone method in a near weightless environment, (2) determine the convective flow patterns induced in a typical float zone, Si melt under conditions perceived to be advantageous to the crystal growth process using flow visualization techniques applied to a dimensionally scaled model of the Si melt, (3) revise the estimates of the economic impact of space produced Si crystal by the float zone method on the U.S. electronics industry, and (4) devise a rational plan for future work related to crystal growth phenomena wherein low gravity conditions available in a space site can be used to maximum benefit to the U.S. electronics industry.

Fowle, A. A.↗

NASA NTRS1979

Programs for calculating cell parameters in electron and X-ray diffraction

Ten programs for calculating cell parameters from single crystal electron diffraction patterns are presented. Most of the programs, written for use with a programmable desk calculator, are also applicable to X-ray diffraction work. The programs can be used to calculate d-spacings from electron diffraction plate measurements, and to determine cell data (including interplanar angles and zone angles) for all crystal systems. A program for rhombohedral-hexagonal conversions and one for matching crystal data from standards with apparent crystal parameters found in diffraction patterns are included. Because they allow rapid determination of data not present in X-ray listings or elsewhere in the literature, the programs facilitate identification of unknowns.

Polkowski, G.↗

NASA NTRS1989

An ion microprobe study of the intra-crystalline behavior of REE and selected trace elements in pyroxene from mare basalts with different cooling and crystallization histories

The effects of crystallization interaction on the trace element zoning characteristics of pyroxenes are analyzed using electron and ion microprobe techniques. Four pigeonite basalts with similar isochemical composition, but different cooling rates and crystallization histories are studied. Pyroxene quadrilaterals displaying crystallization trends are presented. The crystal chemical rationalization of REE zoning, pattern shapes, and abundances are examined. The data reveal that the trace element zoning characteristics in pyroxene and the partitioning of trace elements between pyroxene and the melt are related to the interaction between the efficiency of the crystallization process, the kinetics at the crystal-melt interface, the kinetics of plagioclase nucleation and the characteristics of the crystal chemical substitutions in the pyroxene and the associated crystallizing phase.

Shearer, C. K.↗

NASA NTRS1998

Crystal growth and crystallography

Selected topics that may be of interest for both crystal-structure and crystal-growth communities are overviewed. The growth of protein crystals, along with that of some other compounds, is one of the topics, and recent insights into related phenomena are considered as examples of applications of general principles. The relationship between crystal growth shape and structure is reviewed and an attempt to introduce semiquantitative characterization of binding for proteins is made. The concept of kinks for complex structures is briefly discussed. Even at sufficiently low supersaturations, the fluctuation of steps may not be sufficient to implement the Gibbs-Thomson law if the kink density is low enough. Subsurface ordering of liquids and growth of rough interfaces from melts is discussed. Crystals growing in microgravity from solution should be more perfect if they preferentially trap stress-inducing impurities, thus creating an impurity-depleted zone around themselves. Evidently, such a zone is developed only around the crystals growing in the absence of convection. Under terrestrial conditions, the self-purified depleted zone is destroyed by convection, the crystal traps more impurity and grows stressed. The stress relief causes mosaicity. In systems containing stress-inducing but poorly trapped impurities, the crystals grown in the absence of convection should be worse than those of their terrestrial counterparts.

Review, Tutorial↗

NASA NTRS2008

Materials Science Laboratory - Columnar-to-Equiaxed Transition in Solidification Processing and Microstructure Formation in Casting of Technical Alloys under Diffusive and Magnetically Controlled Convective Conditions

The Materials Science Laboratory - Columnar-to-Equiaxed Transition in Solidification Processing and Microstructure Formation in Casting of Technical Alloys under Diffusive and Magnetically Controlled Convective Conditions (MSL-CETSOL and MICAST) are two investigations which supports research into metallurgical solidification, semiconductor crystal growth (Bridgman and zone melting), and measurement of thermo-physical properties of materials. This is a cooperative investigation with the European Space Agency (ESA) and National Aeronautics and Space Administration (NASA) for accommodation and operation aboard the International Space Station (ISS). Research Summary: Materials Science Laboratory - Columnar-to-Equiaxed Transition in Solidification Processing (CETSOL) and Microstructure Formation in Casting of Technical Alloys under Diffusive and Magnetically Controlled Convective Conditions (MICAST) are two complementary investigations which will examine different growth patterns and evolution of microstructures during crystallization of metallic alloys in microgravity. The aim of these experiments is to deepen the quantitative understanding of the physical principles that govern solidification processes in cast alloys by directional solidification.

Gandin, Charles-Andre↗

NASA NTRS1998

Purification and Crystal Growth of Lead Iodide by Physical Vapor Transport Method

Lead iodide (PbI2) is a layered compound semiconductor being developed as room temperature x- and gamma-ray detector. Compared to the more studied material, mercuric iodide, PbI2 has a higher melting temperature and no phase transition until liquid phase which are indications of better mechanical properties. In this study, the source material was purified by the zone-refining process, and the purest section was extracted from center of the the zone-refined ingot to be grown by physical vapor transport (PVT) method. The zone-refined material and as-grown crystals were characterized by optical microscopy and differential scanning calorimetry (DSC) to reveal the surface morphology, purity and stoichiometry. The results shows that both materials are near-stoichiometric composition, with the purity of the as-grown crystals higher than zone-refined materials. The resistivity of the as-grown crystal (10" Omega-cm) was derived from current-voltage (I-V) measurement, and is 10 times higher than the zone-refined materials. Detail results will be presented and discussed.

Wright, G. W.↗

NASA NTRS1994

Crystallization history of the 1984 Mauna Loa lava flow

During a 3-week eruption in 1984, Mauna Loa produced vent lavas that increased in crystallinity from less than 1 to 30%, and 27-km-long flows that increased in crystallinity as they moved downstream. We examined the crystallization history of these lavas using crystal size distribution (CSD) analysis to study the rates of crystallization, viscosity increase, and latent heating. Typical average growth and nucleation rates were 5 x 10(exp -9) cm/s and 5/cu cm/s for microphenocrysts (20- to 500-micron size crystals nucleated in the rift zone) and 5 x 10(exp -8) cm/s and 5 x 10(exp 4)/cu cm/s for microlites (1- to 20-micron size crystals nucleated in the channel). These crystallization rates are high compared with those found in other CSD studies of igneous rocks, probably due to highly nonequilibrium conditions brought on by rapid degassing in the rift zone and cooling in the lava channel. Growth and nucleation rates decreased with time at the vent and with distance downstream. The maximum downstream total crystallinity measured is 39% (25% microlites, 14% microphenocrysts) in a quenched sample 14 km from the vent. Growth and nucleation rates cannot be calculated for postemplacement samples, but they place upper limits of 53-58% on the amount of crystallization in the channel 9-20 km from the vent. Crystallization could have been mostly responsible for the 10(exp 5)-fold downstream increase in apparent viscosity, although degassing and increasing incorporation of solid lava fragments also contributed. Another effect of crystallization on the lava flow was the sizeable latent heating (0.01 J/g/s over the first half of the flow length, if the crystallinity of downstream quench samples is representative of the hot fluid core), which may have been counteracted by entrainment of cooler material. Measurements of crystallization are shown to be crucial in the study of lava flow emplacement dynamics.

Crisp, Joe↗

NASA NTRS1976

Fe and Mg in plagioclase

Distribution coefficients for Fe and Mg between plagioclase and basaltic liquids were measured for lunar, terrestrial and synthetic systems. The data obtained imply that lunar anorthosites crystallized from relatively iron-rich liquids, that Fe/Mg zoning in plagioclase is an indicator of crystallization processes in basaltic magmas, and that Fe/Mg heterogeneity in plagioclase is a clue to the recognition of impact melts.

Longhi, J.↗

NASA NTRS1984

Laser furnace technology for zone refining

A carbon dioxide laser experiment facility is constructed to investigate the problems in using a laser beam to zone refine semiconductor and metal crystals. The hardware includes a computer to control scan mirrors and stepper motors to provide a variety of melt zone patterns. The equipment and its operating procedures are described.

Griner, D. B.↗

NASA NTRS1977

Supercooling on the lunar surface - A review of analogue information

Terrestrial analog studies of the phase petrology of supercooled melts and rapid crystal growth are reviewed for possible light shed on lunar crystallization, supercooling, and petrogenic processes, in particular rapid consolidation of lavas extruded on the lunar surface, and impact liquids. Crystallization of major constituent minerals (olivine, pyroxene, plagioclase) in dendritic or skeletal forms is found much more characteristic of lunar igneous rocks than of terrestrial counterparts. Olivine and pyroxene occur often as skeletal phenocrysts, and their stage of crystallization is crucial to the genesis and cooling history of porphyritic lavas. Widespread occurrence of glass and of immature radiate crystallization, particularly of highly zoned pyroxenes and zoned plagioclase, is noted.

Donaldson, C. H.↗

NASA NTRS1982

Vacuum tight quartz ampoule for Bridgman growth of crystals with interface demarcation

A growth ampoule for protecting the furnace lining and to prevent a change in the composition of the melt during growth of Pb-T-Te or Ge semiconductors doped with Ga is described. Mo foil is inserted into a quartz tube and sealed at the ends. A vacuum pumping system collapses the tube onto the foil. Spotwelded Mo wires lead in two directions from the collapsed section through quartz capillaries, one of which is also collapsed, on the wire, which provides a contact point for seeded growth of the semiconductor. The ampoule has been used for Bridgeman growth of crystals using a hot zone of 1150 C, with a temperature gradient of 240 C/m, and with current pulses up to 40 A/sq cm.

Crouch, R. K.↗

NASA NTRS1986

A discussion of isotopic systematics and mineral zoning in the shergottites - Evidence for a 180 m.y. igneous crystallization age

The chronologies of the Shergotty, Zagami, ALHA 77005, and EETA 79001 meteorites were reexamined on the basis of shergottites' petrography and mineral chemistry data. Among the various isochrons, the concordant Rb-Sr (about 180 Myr) and U-Th-Pb (about 190 Myr) internal isochrons are interpreted as representing the time of igneous crystallization, while the Rb-Sr, Sm-Nd, and Pb-Pb whole-rock isochrons are interpreted as mixing lines, and are reasonably attributed to igneous processes such as wall-rock assimilation and magma mixing. If the approximated age of less than 200 Myr is correct, the shergottites represent the youngest known extraterrestrial basalts. This conclusion supports the hypothesis that the SNC meteorites are samples of Mars.

Jones, J. H.↗

NASA NTRS1990

Hydrogen induced fracture characteristics of single crystal nickel-based superalloys

A stereoscopic method for use with x ray energy dispersive spectroscopy of rough surfaces was adapted and applied to the fracture surfaces single crystals of PWA 1480E to permit rapid orientation determinations of small cleavage planes. The method uses a mathematical treatment of stereo pair photomicrographs to measure the angle between the electron beam and the surface normal. One reference crystal orientation corresponding to the electron beam direction (crystal growth direction) is required to perform this trace analysis. The microstructure of PWA 1480E was characterized before fracture analysis was performed. The fracture behavior of single crystals of the PWA 1480E nickel-based superalloy was studied. The hydrogen-induced fracture behavior of single crystals of the PWA 1480E nickel-based superalloy was also studied. In order to understand the temperature dependence of hydrogen-induced embrittlement, notched single crystals with three different crystal growth orientations near zone axes (100), (110), and (111) were tensile tested at 871 C (1600 F) in both helium and hydrogen atmospheres at 34 MPa. Results and conclusions are given.

Chen, Po-Shou↗

NASA NTRS1994

The behavior of unsteady thermocapillary flows

The thermocapillary-driven flow of a liquid in a shallow slot provides a simple model to explore the effects of free-surface deflection and end walls on the stability of the flow. Such an investigation may be useful in understanding the complex flow seen in processes such as the float-zone refining of single crystals. A linear stability analysis of the viscously-dominated slot flow indicates stable basic states to both tow- and three-dimensional infinitesimal disturbances for capillary numbers below 43.3. Above this capillary number steady solutions do not exist. We also discuss current work involving the development of an inertially-dominated slot-flow model using singular perturbation methods. If these flows are unstable, inertial effects would be the only possible cause of the instability.

Vrane, David R.↗