Search NASA⌕ Search

SEARCH · Search NASA

Results for “cubesat application”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Cubesat Proximity Operations Demonstration (CPOD)

The CubeSat Proximity Operations Demonstration (CPOD) project will demonstrate rendezvous, proximity operations and docking (RPOD) using two 3-unit (3U) CubeSats. Each CubeSat is a satellite with the dimensions 4 inches x 4 inches x 13 inches (10 centimeters x 10 centimeters x 33 centimeters) and weighing approximately 11 pounds (5 kilograms). This flight demonstration will validate and characterize many new miniature low-power proximity operations technologies applicable to future missions. This mission will advance the state of the art in nanosatellite attitude determination,navigation and control systems, in addition to demonstrating relative navigation capabilities.The two CPOD satellites are scheduled to be launched together to low-Earth orbit no earlier than Dec. 1, 2015.

Relative navigation capabilities↗
NASA NTRSDate not supplied

SelenITA: A Dual-Spacecraft Lunar Cubesat Mission to Characterize the Near-Surface Electromagnetic Plasma Environment

SelenITA is an international interdisciplinary mission consisting of two CubeSats that will provide the first multi-point measurement in a sustained low lunar orbit. This mission will advance the understanding of spatiotemporal differentiation of the electromagnetic space environment at the Moon in support of Artemis crew and the geosciences. The mission science objectives are to: (1) further constrain the origins of crustal magnetic fields and their applications; (2) determine the nature of plasma interactions with crustal magnetic fields; (3) characterize plasma waves and turbulence at the Moon; (4) characterize the lunar surface potential in all plasma environments; (5) constrain the composition, thermal state, and structure of the lunar upper mantle and crust; (6) characterize the ionizing radiation in lunar orbit; (7) determine the density of the dust exosphere as a function of latitude, longitude, and altitude, including the lunar polar space environment. The measurement requirements include: 3-component vector magnetic field, plasma distribution (flux, energy, density, temperature), energetic particles (protons, electrons, gamma rays), and dust. SelenITA builds on a rich history of electromagnetic plasma observations of the near lunar surface and space environment, and it answers high level science questions with state of the art instruments in a small package.

space weather↗
NASA NTRS2014

EDSN Development Lessons Learned

The Edison Demonstration of Smallsat Networks (EDSN) is a technology demonstration mission that provides a proof of concept for a constellation or swarm of satellites performing coordinated activities. Networked swarms of small spacecraft will open new horizons in astronomy, Earth observations and solar physics. Their range of applications include the formation of synthetic aperture radars for Earth sensing systems, large aperture observatories for next generation telescopes and the collection of spatially distributed measurements of time varying systems, probing the Earths magnetosphere, Earth-Sun interactions and the Earths geopotential. EDSN is a swarm of eight 1.5U Cubesats with crosslink, downlink and science collection capabilities developed by the NASA Ames Research Center under the Small Spacecraft Technology Program (SSTP) within the NASA Space Technology Mission Directorate (STMD). This paper describes the concept of operations of the mission and planned scientific measurements. The development of the 8 satellites for EDSN necessitated the fabrication of prototypes, Flatsats and a total of 16 satellites to support the concurrent engineering and rapid development. This paper has a specific focus on the development, integration and testing of a large number of units including the lessons learned throughout the project development.

Technology Demonstration↗
NASA NTRS2010

Xatcobeo: Small Mechanisms for CubeSat Satellites - Antenna and Solar Array Deployment

The Xatcobeo project, which includes the mechanisms dealt with here, is principally a university project to design and construct a CubeSat 1U-type satellite. This work describes the design and operational features of the system for antenna storage and deployment, and the design and simulations of the solar array deployment system. It explains the various problems faced and solutions adopted, with a view to providing valid data for any other applications that could find them useful, be they of a similar nature or not.

EncinasPlaza, Jose Miguel↗
NASA NTRS2015

Lightweight Innovative Solar Array (LISA): Providing Higher Power to Small Spacecraft

Affordable and convenient access to electrical power is essential for all spacecraft and is a critical design driver for the next generation of smallsats, including cubesats, which are currently extremely power limited. The Lightweight Innovative Solar Array (LISA), a concept designed, prototyped, and tested at the NASA Marshall Space Flight Center (MSFC) in Huntsville, Alabama provides an affordable, lightweight, scalable, and easily manufactured approach for power generation in space. This flexible technology has many wide‐ranging applications from serving small satellites to providing abundant power to large spacecraft in GEO and beyond. By using very thin, ultra‐flexible solar arrays adhered to an inflatable structure, a large area (and thus large amount of power) can be folded and packaged into a relatively small volume. The LISA array comprises a launch‐stowed, orbit‐deployed structure on which lightweight photovoltaic devices and, potentially, transceiver elements are embedded. The system will provide a 2.5 to 5 fold increase in specific power generation (Watts/kilogram) coupled with a >2x enhancement of stowed volume (Watts/cubic‐meter) and a decrease in cost (dollars/Watt) when compared to state‐of‐the‐art solar arrays.

Johnson, Les↗
NASA NTRSDate not supplied

Advanced Radiation Detectors and Detector Systems Research

Real‐time awareness of space radiation is critical for missions beyond LEO. Missions to the Moon, Mars, Near‐Earth‐Objects (NEOs), inner and outer planets, as well as other destinations in space, will require embedded instrumentation to provide feedback for “smart”, adaptive control systems. Precision instrumentation will also be needed to provide improved data for space radiation modeling and space weather forecasting and awareness. Compact instrumentation on small platforms such as CubeSats and other small space‐faring vehicles will provide a better understanding of the space radiation environment by supplying data from multiple locations in space where information is yet unknown. Compact integrable solid‐state detectors with low noise and high tolerance of operation in a radiation environment are enabled by the application of Wide Band Gap semiconductors as radiation detectors. NASA Glenn Research Center (GRC) is applying its expertise and facilities in harsh environment instrumentation to develop supporting technologies that enable improved instruments for space science missions. A variety of radiation detectors are under development, such as silicon carbide semiconductor detectors, for applications to space science, lunar prospecting, and fission power systems.

Field and particle detectors↗
NASA NTRS2015

Lightweight Integrated Solar Array (LISA): Providing Higher Power to Small Spacecraft

Affordable and convenient access to electrical power is essential for all spacecraft and is a critical design driver for the next generation of smallsats, including CubeSats, which are currently extremely power limited. The Lightweight Integrated Solar Array (LISA), a concept designed, prototyped, and tested at the NASA Marshall Space Flight Center (MSFC) in Huntsville, Alabama provides an affordable, lightweight, scalable, and easily manufactured approach for power generation in space. This flexible technology has many wide-ranging applications from serving small satellites to providing abundant power to large spacecraft in GEO and beyond. By using very thin, ultraflexible solar arrays adhered to an inflatable or deployable structure, a large area (and thus large amount of power) can be folded and packaged into a relatively small volume.

Johnson, Les↗
NASA NTRS2013

Small Projects Rapid Integration and Test Environment (SPRITE): Application for Increasing Robutness

Over the past few years interest in the development and use of small satellites has rapidly gained momentum with universities, commercial, and government organizations. In a few years we may see networked clusters of dozens or even hundreds of small, cheap, easily replaceable satellites working together in place of the large, expensive and difficult-to-replace satellites now in orbit. Standards based satellite buses and deployment mechanisms, such as the CubeSat and Poly Pico-satellite Orbital Deployer (P-POD), have stimulated growth in this area. The use of small satellites is also proving to be a cost effective capability in many areas traditionally dominated by large satellites, though many challenges remain. Currently many of these small satellites undergo very little testing prior to flight. As these small satellites move from technology demonstration and student projects toward more complex operational assets, it is expected that the standards for verification and validation will increase.

Lee, Ashley↗
NASA NTRS2020

Satellite and airborne remote sensing of gross primary productivity in boreal Alaskan lakes

In terrestrial and marine ecosystems, remote sensing has been used to estimate gross primary productivity (GPP) for decades, but few applications exist for shallow freshwater ecosystems.Here we show field-based GPP correlates with satellite and airborne lake color across a range of optically and limnologically diverse lakes in interior Alaska. A strong relationship between in situ GPP derived from stable oxygen isotopes (δ18O) and space-based lake color from satellites (e.g. Landsat-8, Sentinel-2 and CubeSats) and airborne imagery (AVIRIS-NG) demonstrates the potential power of this technique for improving spatial and temporal monitoring of lake GPP when coupled with additional field validation measurements across different systems. In shallow waters clear enough for sunlight to reach lake bottoms, both submerged vegetation (macrophytes and algae) and phytoplankton likely contribute to GPP. The stable isotopes and remotely sensed shallow lake color used here integrate both components. These results demonstrate the utility of lake color as a feasible means for mapping lake GPP from remote sensing. This novel methodology estimates GPP from remote sensing in shallow lakes by combining field measurements of oxygen isotopes with airborne, satellite and CubeSat imagery. This use of lake color for providing insight into ecological processes of shallow lakes is recommended, especially for remote arctic and boreal landscapes.

airborne remote sensing↗
NASA NTRS2014

The EDSN Intersatellite Communications Architecture

The Edison Demonstration of Smallsat Networks (EDSN) is a swarm of eight 1.5U Cubesats developed by the NASA Ames Research Center under the Small Spacecraft Technology Program (SSTP) within NASA Space Technology Mission Directorate (STMD). EDSN, scheduled for launch in late 2014, is designed to explore the use of small spacecraft networks to make synchronized, multipoint scientific measurements, and to organize and pass those data to the ground through their network. Networked swarms of these small spacecraft will open new horizons in astronomy, Earth observations and solar physics. Their range of applications include the formation of synthetic aperture radars for Earth sensing systems, large aperture observatories for next generation telescopes and the collection of spatially distributed measurements of time varying systems, probing the Earth's magnetosphere, Earth-Sun interactions and the Earth's geopotential. The EDSN communications network is maintained and operated by a simple set of predefined rules operating independently on all eight spacecraft without direction from ground based systems. One spacecraft serves as a central node, requesting and collecting data from the other seven spacecraft, organizing the data and passing it to a ground station at regular intervals. The central node is rotated among the spacecraft on a regular basis, providing robustness against the failure of a single spacecraft. This paper describes the communication architecture of the EDSN network and its operation with small spacecraft of limited electrical power, computing power and communication range. Furthermore, the problems of collecting and prioritizing data through a system that has data throughput bottlenecks are addressed. Finally, future network enhancements that can be built on top of the current EDSN hardware are discussed.

Communications↗
NASA NTRS2018

A 6U Hybrid Propulsion Module for CUBESATS

A 6U hybrid propulsion module is presented. It is designed to be used as a stage for a 6U CubeSat with a combined wet mass up to 25 kg. Hybrid rocket propulsion is utilized because it is responsive, high performance, capable of multiple burns and safe/non-toxic. Hybrid rockets employ a solid fuel and liquid or gaseous oxidizer. In this case, the fuel is PolyMethyl MethAcrylate and the oxidizer is gaseous oxygen. This propellant combination produces an Isp of greater than 300 seconds. The gaseous oxidizer simplifies the design and is used in dual mode with cold gas thrusters for attitude control. In general, hybrid propulsion is higher performance and higher thrust than conventional options considered for CubeSats (e.g. monopropellants), making it ideal for larger manuevers such as plane changes. The Attitude Control System has been sized to ensure that the CubeSat can be controlled under the thrust loads of the propulsion system. A hybrid rocket motor of this size is currently being tested at the Jet Propulsion Laboratory. Thirty-four successful tests have been completed at JPL with this propellant combination during the last 2.5 years. Current tests include long duration tests (> 95 seconds) and multiple starts (five). These tests and applicability to potential mission requirements will be discussed. Future test plans to move the motor into a vacuum facility to achieve a Technology Readiness Level of 5 by the end of September 2018 will be discussed, and an overview of the proposed TRL 5 to 6 maturity plan will also be presented.

Nakazono, B.↗
NASA NTRS2018

Space Mobile Network Concepts for Missions Beyond Low Earth Orbit

The Space Mobile Network (SMN) is an architectural framework that will allow for quicker, more efficient and more easily available space communications services, providing user spacecraft with an experience similar to that of terrestrial mobile network users. While previous papers have described SMN concept using examples of users in low-Earth orbit, the framework can also be applied beyond the near-Earth environment. This paper details how SMN concepts such as user-initiated services, which will enable users to request access to high-performance link resources in response to real-time science or operational events, would be applied in and beyond the near-Earth regime. Specifically, the paper explores the application of user-initiated services to direct-to-Earth (DTE), relay, and DTE/relay hybrid scenarios in near-Earth, lunar, Martian and other space regimes.

CubeSat and Autonomy↗
NASA NTRS2018

Magnetospheric Constellation: Leveraging Space 2.0 for Big Science

Earth's magnetosphere is a large magnetic cavity formed through the interaction of the solar wind and Earth's intrinsic magnetic field. Solar wind energy enters this cavity through a boundary - the magnetopause - separating Earth's field from the solar wind. This energy leads to many forms of "space weather", including the aurora, geomagnetic storms, and energization of the Van Allen radiation belts. Despite decades of research, we still do not understand the extent of dayside reconnection sites, nor do we have a quantifiable understanding of how much energy enters the magnetosphere during different solar wind conditions - necessary for space weather prediction. On the nightside, impulsive flows at various spatial and temporal scales occur frequently during storms and substorms, and couple to the ionosphere through still unresolved physical mechanisms. Because the magnetosphere is so large, it has been understood since the dawn of the space age that a full understanding of this complex region could only be achieved with a large fleet of in situ spacecraft. NASA has studied one such constellation, the socalled "Magnetospheric Constellation" (MagCon), since the1990's, but it is deemed too expensive to implement using traditional approaches. The CubeSat/ SmallSat revolution represents a fundamental disruption to traditional mission architectures, and in this paper I will discuss how, by leveraging innovation in spacecraft subystems, advanced manufacturing, and access to space, we can finally realize this long-term vision of exploration and discovery. The proposed modular approach, utilizing rideshare and propulsive ESPAs, would also enable worldwide participation in the mission, and is applicable to any constellation mission, including Earth Science missions.

Kepko, Emil Larry↗
NASA NTRSDate not supplied

Estimation of Timing Performance with Pulsed Laser Links for Small Satellite PNT

Satellite constellations are growing in size and in utility for applications as diverse as providing reliable, low-latency internet service to rural areas orEarth science missions.This expansion of satellite constellations brings attention to the need for responsive and reliable satellite communication.Current research in the PrecisionSpace Systems Laboratory at the University of Florida focuses on using pulsed laser communications as the method of relaying time signals instead of the radio frequency (RF)signals.The upcoming CLICK (CubeSat Laser Infrared CrosslinK) missions (Massachusetts Institute of Technology, University of Florida, NASA Ames Research Center) will demonstrate a spacecraft-to-spacecraft laser communication link and time-transfer.For pre-flight technology assessment of missions such as CLICK, a simulation of a spacecraft constellation in Earth orbit has been created to estimate clock synchronization and precision orbit determination based on measured instrumentation performance.We have developed a novel MATLAB-based numerical simulator to model spacecraft-to-spacecraft laser time-transfer and estimate the offset between the spacecraft clocks over time.This simulation includes timing errors associated with laser pulse generation and detection, as well as non-Gaussian clock drift models.The two on-board clocks modeled are a cesium-based Chip-Scale Atomic Clock (CSAC) and a rubidium-based Miniature Atomic Clock (MAC), both produced by Microchip.An example case of two spacecraft in a circular, low-Earth orbit receiving GPS position, GPS timing, and laser pulse time-of-flight measurements is simulated.The positions and velocities of the two spacecraft at a reference epoch and the constant clock model coefficients are estimated.Polynomial models of different orders were used as clock models. The effect of clock model order on the root-mean-square (RMS) of the clock error is apparent in the case using GPS and lasing measurements, showing that the clock model improves with increasing clock model order. Results compare the estimated clock model of a mission operation that only uses GPS measurements and a mission operation that uses both GPS and laser pulse time-of-flight measurements between spacecraft referenced to their on-board CSACs or on-board MACs. Including lasing measurements reduces the RMS clock model error by approximately 80% of the RMS of the cases with only GPS measurements.This simulation tool can be used to optimize the lasing operations schedule based on mission timing performance objectives. During this presentation, I will discuss the details of the simulation and clock model estimation, as well as discuss the results.I will compare the results of incorporating lasing timing measurements to using only GPS measurements and the outcomes of using different orders of polynomials.

Timing Performance↗
NASA NTRS2015

Modular Rapidly Manufactured Small Satellite (MRMSS)

The Modular Rapidly Manufactured Small Satellite (MRMSS) project applies modular building block systems to space applications. The need to reduce mass for spaceflight applications and reuse resources is a critical technology for long duration space missions. Mass reduction and reuse of material will help bring down costs for spaceflight missions and open up more possibilities for exploration and research. The MRMSS project consists of two major components: A basic research component demonstrating electronic digital materials, and a technology demonstration applying the modular building block based systems concept to the CubeSat form factor. This paper describes the core technologies developed to enable the modular system as well the first flight demonstration on a sounding rocket.

Modular Architecture↗
NASA NTRS2020

Simultaneous Optical Links with the Inter-Satellite Omnidirectional Optical Communicator

As the onboard data volume for smaller platforms such as CubeSats increases, Radio Frequency (RF) communications systems may be unable to adequately support the required downlink demand. Optical communications (lasercom) systems can relieve the data bottleneck as they can support higher data throughput than RF for comparable Size, Weight, and Power (SWaP). Lasercom crosslinks are of particular interest for spacecraft swarms and constellations because they enable additional mission robustness for distributed science observations and remote sensing applications. The Inter-Satellite Omnidirectional optical Communicator (ISOC) is capable of supporting simultaneous lasercom crosslinks between multiple spacecraft at separations of up to thousands of kilometers in orbit. The ISOC architecture features a truncated dodecahedron chassis containing an array of photodetectors and gimbal-less MEMS mirrors, enabling full-duplex communications. The main objectives of the ISOC terminal include: 1) full sky coverage, 2) Gbps data rates, and 3) the ability to maintain multiple simultaneous links. We show ISOC can support up to 12 simultaneous links with the current architecture at 1-Gbps at 200-km separation with 10-9 BER. Compared to current lasercom transceivers (i.e., point-to-point), ISOC offers increased throughput performance for similar SWaP. A detailed link budget for both scenarios is presented, and the limiting factors for maximum number of simultaneous links are discussed.

Cahoy, Kerri↗
NASA NTRS2015

Solar Sail Propulsion for Interplanetary Cubesats

NASA is developing two small satellite missions as part of the Advanced Exploration Systems (AES) Program, both of which will use a solar sail to enable their scientific objectives. Solar sails use sunlight to propel vehicles through space by reflecting solar photons from a large, mirror‐like sail made of a lightweight, highly reflective material. This continuous photon pressure provides propellantless thrust, allowing for very high (Delta)V maneuvers on long‐duration, deep space exploration. Since reflected light produces thrust, solar sails require no onboard propellant. Solar sail technology is rapidly maturing for space propulsion applications within NASA and around the world.

Johnson, Les↗
NASA NTRSDate not supplied

The NASA Advanced Composite Solar Sail System (ACS3) Flight Demonstration: A Technology Pathfinder for Practical Smallsat Solar Sailing

NASA’s Space Technology Mission Directorate (STMD) is developing a new generation of compactly packageable composite booms designed specifically for small spacecraft applications where volumes for deployable structures are limited. NASA’s Advanced Composite Solar Sail System (ACS3) will be the first spaceflight application of this boom technology. ACS3 will also be NASA’s first practical solar sail. Objectives of the ACS3 project are to deploy an 80 m2composite boom solar sail in low Earth orbit, and as an extended goal, demonstrate controlled solar sailing flight, including orbit raising and lowering. An overview of the ACS3 project and objectives, including descriptions of ACS3’s solar sail structures and materials technology, 12U CubeSat spacecraft systems, and flight concept of operations, is provided here. Scalability of the ACS3 solar sail to future, near-term smallsat solar sailing mission requirements will also be discussed. Launch of ACS3 is currently anticipated for mid to late 2022.

Keats Wilkie↗