Search NASA⌕ Search

SEARCH · Search NASA

Results for “cumulative impacts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

A study of the United States coal resources

Geologically significant coal resources were identified. Statistically controlled tonnage estimates for each resource type were prepared. Particular emphasis was placed on the identification and description of coals in terms of seam thickness, inclination, depth of cover, discontinuities caused by faulting and igneous intrusion, and occurrence as isolated or multiseam deposits. The national resource was organized into six major coal provinces: the Appalachian Plateau, the Interior Basins, the Gulf Coastal Plain, the Rocky Mountain Basins, the High Plains, and North Alaska. Each basin within a province was blocked into subareas of homogeneous coal thickness. Total coal tonnage for a subarea was estimated from an analysis of the cumulative coal thickness derived from borehole or surface section records and subsequently categorized in terms of seam thickness, dip, overburden, multiseam proportions, coal quality, and tonnage impacted by severe faulting and igneous intrusions. Confidence intervals were calculated for both subarea and basin tonnage estimates.

Ferm, J. C.↗

Europa Surface Radiation Environment for Lander Assessment

The Jovian magnetospheric particle environment at Europa's surface is critical to assessment of landed astrobiological experiments in three respects: (1) the landing site must be chosen for the best prospects for detectable organic or inorganic signs of Life, e.g. regions of freshly emergent flows from the subsurface; (2) lander systems must reach the surface through the Jovian magnetospheric environment and operate long enough on the surface to return useful data; (3) lander instrumentation must be capable of detecting signs of life in the context of the local environmental radiation and associated chemistry. The Galileo, Voyager, and Pioneer missions have provided a wealth of data on energetic particle intensities throughout the Jovian magnetosphere including from many flybys of Europa. cumulative radiation dosages for spacecraft enroute to Europa can be well characterized, but knowledge of the surface radiation environment is very limited. Energetic electrons should primarily impact the trailing hemisphere with decreasing intensity towards the center of the leading hemisphere and are the most significant radiation component down to meter depths in the surface regolith due to secondary interactions. Observed surface distribution for sulfates is suggestive of electron irradiation but may have alternative interpretations. Having much-larger magnetic gyroradii than electrons, energetic protons and heavier ions irradiate more of the global surface. The particular orientations of electron, proton, and ion gyromotion would project into corresponding directional (e.g., east-west) anisotropies of particle flu into the surface. Particular topographic features at the landing site may therefore offer shielding from part of the incident radiation.

Cooper, John F.↗

Mineralogy of nakhlite Martian meteorites: Implications for their relative burial depths

Nakhlites are Martian cumulate rocks mainly composed of augite with variable amounts of olivine and groundmass (mesostasis). Currently seven samples are known: Nakhla (Nak), Governador Valadares (GV), Lafayette (Laf), NWA817, Y000593 (Y), NWA998 and MIL03346 (MIL). All the nakhlites show a similar unbrecciated cumulate texture, and their identical crystallization and exposure ages suggest that they originated from the same igneous body on Mars and were ejected by the same impact event. It is important to study difference of their mineralogy to reconstruct the igneous body from which nakhlites originated. Augite grains in all nakhlites have a nearly identical core composition (En39Fs22Wo39) and have thin Fe-rich rims. These Fe-rich rims are zoned to Ca-poor pyroxene compositions and the degree of chemical zoning varies from one sample to another. NWA998 has the most Mg-rich edge composition. The edge composition becomes more Fe-rich in the order of Laf, Nak/GV, Y and NWA817. Unlike other samples, the Fe-rich edge of MIL augite is zoned to the hedenbergite composition. Olivine grains in all samples except Laf and NWA998 show extensive chemical zoning whose degree is clearly related to the chemical zoning of pyroxenes. MIL and NWA817 have the widest compositional ranges (Fa54-93). Y has a slightly narrower compositional range of Fa58-85. Nak and GV have even narrower ranges (Fa58-72). In contrast to these samples, olivines in Laf and NWA998 are homogeneous (Fa66-67 and Fa61-62, respectively). Such chemical zoning (Fa and Ca) can be used to quantitatively estimate their cooling rates (burial depths) because it was clearly formed by interaction with the intercumulus melt. The obtained burial depths are 1-2 m for NWA817, 4 m for MIL, 7 m for Y, approx.10 m for Nak and GV, and >30 m for Laf and NWA998. This order is clearly related to the degree of pyroxene chemical zoning. The abundance and mineralogy of nakhlite groundmass are also consistent with this order. In Nak, GV and Laf, the groundmass abundance is about 7-8%. Y and NWA998 have a slightly higher abundance (10%), while NWA817 and MIL have much higher abundance (20-24%). The groundmass texture is also related to its abundance. The groundmass of Nak, GV, Laf and Y is mainly composed of feldspar laths. In contrast, NWA817 and MIL have glassy mesostasis without feldspar crystals. In NWA998, feldspar is a large blocky crystal with clear twinning, suggesting that it is even deeper than Laf.

Mikouchi, T.↗

Multiple Reservoirs of Volatiles in the Moon Revealed by the Isotopic Composition of Chlorine in Lunar Basalts

The isotopes of chlorine (37Cl and 35Cl) are highly fractionated in lunar samples compared to most other Solar System materials. Recently, the chlorine isotope signatures of lunar rocks have been attributed to large-scale degassing processes that occurred during the existence of a magma ocean. In this study we investigated how well a suite of lunar basalts, most of which have not previously been analyzed, conform to previous models. The Cl isotope compositions (δ37Cl (‰) = [(37Cl/35Clsample/37Cl/35ClSMOC) − 1] × 1000, where SMOC refers to standard mean ocean chloride) recorded range from ∼+7 to +14‰ (Apollo 15), +10 to +19‰ (Apollo 12), +9 to +15‰ (70017), +4 to +8‰ (MIL 05035), and +15 to +22‰ (Kalahari 009). The Cl isotopic data from the present study support the mixing trends previously reported by Boyce et al. (2015) and Barnes et al. (2016), as the Cl isotopic composition of apatites are positively correlated with bulk-rock incompatible trace element abundances in the low-Ti basalts, inclusive of low-Ti and KREEP basalts. This trend has been interpreted as evidence that incompatible trace elements, including Cl, were concentrated in the urKREEP residual liquid of the lunar magma ocean, rather than the mantle cumulates, and that urKREEP Cl had a highly fractionated isotopic composition. The source regions for the basalts were thus created by variable mixing between the mantle (Cl-poor and relatively unfractionated) and urKREEP. The high-Ti basalts show much more variability in measured Cl isotope ratios and scatter around the trend formed by the low-Ti basalts. Most of the data for lunar meteorites also fits the mixing of volatiles in their sources, but Kalahari 009, which is highly depleted in incompatible trace elements, contains apatites with heavily fractionated Cl isotopic compositions. Given that Kalahari 009 is one of the oldest lunar basalts and ought to have been derived from very early-formed mantle cumulates, a heavy Cl isotopic signature is likely not related to its mantle source, but more likely to magmatic or secondary alteration processes, perhaps via impact-driven vapor metasomatism of the lunar crust.

Mccubbin, Francis M.↗

Galileo SSI lunar observations: Copernican craters and soils

The Galileo spacecraft completed its first Earth-Moon flyby (EMI) in December 1990 and its second flyby (EM2) in December 1992. Copernican-age craters are among the most prominent features seen in the SSI (Solid-State Imaging) multispectral images of the Moon. The interiors, rays, and continuous ejecta deposits of these youngest craters stand out as the brightest features in images of albedo and visible/1-micron color ratios (except where impact melts are abundant). Crater colors and albedos (away from impact melts) are correlated with their geologic emplacement ages as determined from counts of superposed craters; these age-color relations can be used to estimate the emplacement age (time since impact event) for many Copernican-age craters on the near and far sides of the Moon. The spectral reflectivities of lunar soils are controlled primarily by (1) soil maturity, resulting from the soil's cumulative age of exposure to the space environment; (2) steady-state horizontal and vertical mixing of fresh crystalline materials ; and (3) the mineralogy of the underlying bedrock or megaregolith. Improved understanding of items (1) and (2) above will improve our ability to interpret item (3), especially for the use of crater compositions as probes of crustal stratigraphy. We have examined the multispectral and superposed crater frequencies of large isolated craters, mostly of Eratosthenian and Copernican ages, to avoid complications due to (1) secondaries (as they affect superposed crater counts) and (2) spatially and temporally nonuniform regolith mixing from younger, large, and nearby impacts. Crater counts are available for 11 mare craters and 9 highlands craters within the region of the Moon imaged during EM1. The EM2 coverage provides multispectral data for 10 additional craters with superposed crater counts. Also, the EM2 data provide improved spatial resolution and signal-to-noise ratios over the western nearside.

Mcewen, A. S.↗

Revisiting the petrogenesis of pyroclastic glass bead deposits at the Apollo 15 and 17 sites

The Apollo 15 low-titanium and Apollo 17 high-titanium pyroclastic glass beads are amongst the most primitive magmatically derived samples obtained from the Moon. Two key samples, the low-Ti Apollo 15426 green glass clod and the high-Ti Apollo 74220 orange glass are morphologically distinct, where the Apollo 15 beads are larger (~ 107 μm along maximum axis) and more fractured, and the Apollo 17 are smaller (~42 μm) and less fractured. In this study, holohyaline beads as well as crystallized beads were examined from both samples. Crystallized beads show compositional variability in major, minor, and trace elements and enable examination of magmatic mineral fractionation processes during cooling of both deposits. The Apollo 15426 beads experienced variable olivine crystallization, whereas the Apollo 74220 beads experienced both olivine and ilmenite crystallization. Holohyaline beads from both deposits show more limited major, minor, and trace element variability than their crystallized counterparts. Trace element abundance data for individual holohyaline beads show that in Apollo 74220, they are tightly clustered at ~30 × Carbonaceous Ivuna chondrite [CI] with negative Eu anomalies and subchondritic Nb/Ta, and interpreted to reflect the presence of late-stage magma ocean cumulate overturned into an otherwise primitive mantle source. Incompatible trace element abundances for holohyaline beads in 15426 are supra-chondritic from ~8 × CI, to >80 × CI, with pronounced relative depletions in Sr and Eu for the most incompatible element enriched beads, which represent a distinct bead group within the deposit. Apollo 15426 beads have elevated Ni and Co abundances at the edges of the beads compared to their centers. These data are interpreted to reflect a more complex magmatic evolution of the 15426 deposit, beginning with: (i) initial magma generation, storage and assimilation within shallower low-Ca and high-Ca pyroxene bearing magma ocean cumulates (15B,C); (ii) mobilization of the earlier magmas by more recently generated primitive magmas (15A); (iii) eruption and crystallization of some beads (15D,E), and (iv) later jumbling of the deposit, possible impact contamination and addition of exotic bead components (J Group). In contrast, the 74220 data shows no discernable difference between Ni and Co abundances at the edges and centers supporting prior observations for limited melt fractionation and an absence of meteoritic components. It is further suggested that both deposits are likely to have been formed in the presence of a transient atmosphere. Using 74220 melt compositions from this study, post-entrapment crystallization abundances range from 266 to 1130 micrograms/g for H 2 O, 36 to 68 micrograms/g for F, 441 to 832 micrograms/g for S, and zero to 2.31 micrograms/g for Cl, consistent with prior studies and suggesting up to ~0.1 wt.% H 2 O in the melt, with considerably less in the source. The role that late-stage magma ocean cumulates rich in ilmenite, apatite and high-Ca pyroxene might play in modifying this volatile element estimate, however, casts remaining doubt on the volatile element abundance and evolution of the primitive Moon.

Moon↗

Breakup of meteoroids in the Venusian atmosphere and its effects on crater formation

Early results of the Magellan mission to Venus show that almost all of the observed impact craters appear to be unaffected by erosion, burial, and tectonic deformation. Therefore it is reasonable to assume that the observed paucity of small craters in the cumulative size-frequency distribution (SFD) relative to the simple power laws observed on airless planets is most likely due to atmospheric effects on the incoming meteoroids. A model was developed earlier for travel and breakup of a meteoroid in an atmosphere, but this model was never used to estimate a SFD. An attempt is made to match the cumulative SFD and the number and size distribution of multiple-floored craters and crater fields using this model.

Herrick, R. R.↗

A New View of the Lunar South Pole from the Lunar Orbiter Laser Altimeter (LOLA)

Upcoming missions to the lunar south pole require detailed maps over large areas to fully characterize landing sites locally and regionally and to place their data into proper geologic context. To that end, we enhanced the Lunar Orbiter Laser Altimeter (LOLA) altimetry dataset for the south polar region, from which we produced new maps of topography, topographic roughness, and permanently shadowed regions (PSRs). The roughness maps reveal a diversity of terrains characterized by hectometer-scale roughness which is controlled in this region primarily by cratering and downslope mass transport. The south polar region is littered with linear roughness features of order ~1 – 10 km wide and ~10s – 100s of km long hypothesized to be secondary impacts within extended ejecta rays. Non uniformities in these features could reflect variations in secondary impactor properties and/or target terrain properties. Poleward of 80° S, the PSR cumulative size-frequency distribution (CSFD) shows an approximately power-law behavior whose exponent has a spatial variation of ~10%. PSRs with areas < 1 km2 contain 15 ± 5% of the total PSR area. Finally, we studied the effect of false positives and false negatives on the accuracy of the measured PSR cumulative size-frequency distribution (CSFD) and on the area for any individual PSR. The new maps presented here have many applications in the science and exploration of the lunar south polar region, such as geologic mapping and traverse planning.

Michael K. Barker↗

Test and Analysis of Foam Impacting a 6x6 Inch RCC Flat Panel

This report presents the testing and analyses of a foam projectile impacting onto thirteen 6x6 inch flat panels at a 90 degrees incidence angle. The panels tested in this investigation were fabricated of Reinforced-Carbon-Carbon material and were used to aid in the validation of an existing material model, MAT58. The computational analyses were performed using LS-DYNA, which is a physics-based, nonlinear, transient, finite element code used for analyzing material responses subjected to high impact forces and other dynamic conditions. The test results were used to validate LS-DYNA predictions and to determine the threshold of damage generated by the MAT58 cumulative damage material model. The threshold of damage parameter represents any external or internal visible RCC damage detectable by nondestructive evaluation techniques.

Lessard, Wendy B.↗

Characterizing a New Surface-Based Shortwave Cloud Retrieval Technique, Based on Transmitted Radiance for Soil and Vegetated Surface Types

This paper presents an approach using the GEneralized Nonlinear Retrieval Analysis (GENRA) tool and general inverse theory diagnostics including the maximum likelihood solution and the Shannon information content to investigate the performance of a new spectral technique for the retrieval of cloud optical properties from surface based transmittance measurements. The cumulative retrieval information over broad ranges in cloud optical thickness (tau), droplet effective radius (r(sub e)), and overhead sun angles is quantified under two conditions known to impact transmitted radiation; the variability in land surface albedo and atmospheric water vapor content. Our conclusions are: (1) the retrieved cloud properties are more sensitive to the natural variability in land surface albedo than to water vapor content; (2) the new spectral technique is more accurate (but still imprecise) than a standard approach, in particular for tau between 5 and 60 and r(sub e) less than approximately 20 nm; and (3) the retrieved cloud properties are dependent on sun angle for clouds of tau from 5 to 10 and r(sub e) less than 10 nm, with maximum sensitivity obtained for an overhead sun.

Shannon information content↗

COVID-19 Lockdowns Drive Decline in Active Fires in Southeastern United States

Fire is a common ecosystem process in forests and grasslands worldwide. Increasingly, ignitions are controlled by human activities either through suppression of wildfires or intentional ignition of prescribed fires. The Southeastern United States leads the nation in prescribed fire, burning ca. 80% of the countries extent annually. The COVID-19 pandemic radically changed human behavior as workplaces implemented social-distancing guidelines and provided an opportunity to evaluate relationships between humans and fire as fire management plans were postponed or cancelled. Using active fire data from satellite-based observations, we found that in the Southeastern United States, COVID-19 led to a 21% reduction in fire activity compared to the 2003-2019 average. The reduction was more pronounced for federally managed lands, up to 41% below average compared to the past 20-years (38% below average compared to the past decade). Declines in fire activity were partly affected by an unusually wet February before the COVID-19 shutdown began in mid-March 2020. Despite the wet spring, the predicted number of active fire detections was still lower than expected, confirming a COVID-19 signal on ignitions. In addition, prescribed fire management statistics, reported by US federal agencies, confirmed the satellite observations, and showed that following the wet February and before the mid-March COVID-19 shutdown, cumulative burned area was approaching record highs across the region. With fire return intervals in the Southeastern United States as frequent as 1-2 years, COVID-19 fire impacts will contribute to an increasing backlog in necessary fire management activities, affecting biodiversity and future fire danger.

Biological Sciences↗

Moon-Mercury - Large impact structures, isostasy and average crustal viscosity

It is shown that Mercury's surface has only 70% as many large craters (of at least 200 km in diameter) as the moon. The density of Mercurian impact craters having diameters over 400 km is 30% of that of the moon, and for craters with diameters between 400 and 700 km, Mercurian density is 21% of that of the moon. The size-frequency distribution curve of Mercury is the same as the lunar cumulative -2 slope. The Mercurian curve, however, lies well below the 10% surface saturation level of the lunar curve. This may indicate that the old, heavily-cratered Mercurian terrain is not presently in a state of cratering equilibrium. The differences in crater and basin densities observed between Mercury and the moon may be functions of crater-production rates or of different crustal histories. The total isostatic compensation of impact craters having diameters of about 800 km suggests that the average viscosity of the Mercurian crust during approximately the past 4 eons was the same as that of the moon.

Schaber, G.↗

Metamorphism of brecciated ANT rocks - Anorthositic troctolite 72559 and norite 78527

Rake samples 72559 and 78527 are annealed rocks of ANT-suite mineralogy and bulk composition. The rocks were presumably derived from ancient lunar highland ANT rocks of cumulate origin. Sample 72559 is polymict and its precursors were anorthositic-troctolitic in composition. Sample 78527 is monomict and of noritic derivation. The precursors were brecciated due to impact processes; 72559 shows evidence of some impact melting. The samples were thermally metamorphosed forming rocks with granoblastic matrix textures. Coexisting matrix pyroxenes indicate equilibration temperatures of 950-1000 C for both rocks. Accessory opaque oxide minerals in the rocks show rather wide compositional variations. These probably primarily reflect compositional ranges inherited from the precursor/s with little integranular equilibration among them during metamorphism.

Nehru, C. E.↗

Sleep and Rest Requirements: Physiological Considerations

Sleep is a vital physiological need which must be met to insure optimal functioning. A single night of significantly shortened sleep negatively impacts performance, alertness, and mood. Restricted sleep studies have shown that even a relatively small amount of sleep loss over several consecutive days can be additive and result in a cumulative sleep debt with similar detrimental effects. Compounding the problem of sleep loss in the operational environment is the poor correlation between subjective reports of sleepiness and objective measures of physiological sleep need. Some of the factors determining how sleepy an individual is at a given point in time are: (1) individual characteristics (e.g., amount of prior sleep and wakefulness, circadian phase, age), (2) environmental conditions (e.g., noise, temperature, amount of social interaction), and (3) task variables (e.g., signal rate, workload). Although sleep need can be masked with medications, the only way to reduce it is with sleep itself. The timing of the sleep period can affect sleep duration and quality and thus its restorative strength. The data are clear that increasing sleep time results in improved alertness. This paper will briefly review the scientific findings on sleep need, the effects of sleep loss, napping strategies, and the implications of incorporating physiologically sound sleep and rest strategies into the operational aviation environment.

Neri, David F.↗

Skeletal Adaptation to Daily Activity: A Biochemical Perspective

Musculoskeletal forces generated by normal daily activity on Earth maintain the functional and structural properties of muscle and bone throughout most of one's adult life. A reduction in the level of cumulative daily loading caused by space flight, bed rest or spinal cord injury induces rapid muscle atrophy, functional changes in muscle, and bone resorption in regions subjected to the reduced loading. Bone cells in culture and bone tissue reportedly respond to a wide variety of non-mechanical and mechanical stimuli ranging, from electromagnetic fields, and hormones to small amplitude, high frequency vibrations, fluid flow, strain rate, and stress/strain magnitude. However, neither the transduction mechanism that transforms the mechanical input into a muscle or bone metabolic response nor the characteristics, of the loading history that directly or indirectly stimulates the cell is known. Identifying the factors contributing to the input stimulus will have a major impact on the design of effective countermeasures for long duration space flight. This talk will present a brief overview of current theories of bone remodeling and functional adaptation to mechanical loading. Work from our lab will be presented from the perspective of daily cumulative loading on Earth and its relationship to bone density and structure. Our objective is to use the tibia and calcaneus as model bone sites of cortical and cancellous bone adaptation, loaded daily by musculoskeletal forces in equilibrium with the ground reaction force. All materials that will be discussed are in the open scientific literature.

Whalen, Robert T.↗

Petrographic and petrological study of lunar rock materials

Samples returned from Apollo 14 (14171, 14305, 14319), Apollo 15 (15255), Apollo 16 (61175, 67455), and Apollo 17 (77215) were studied optically and selected polished sections by SEM/Microprobe. Splits and separates from 77215, 67455, 61175 and 15255 were prepared; 77215 and 67455 were analyzed for major, minor and LIL trace elements. The data indicate that 77215, a noritic breccia clast found in the Station7 boulder, is a norite cumulate similar to and probably derived from the same body as 78235. The Apollo 17 boulders are found to be part of the same melt sheet, which was formed by a major impact event, possibly Serenitatis, about 4 B. Y. ago. The Apollo 14 and 16 breccias are polymict, their clast populations indicating quite different provenance. The Apollo 14 breccias are possibly the result of multiple impacts, while the other breccias studied appear to have been formed by single impacts. ANT suite clasts included in 61175 are, for the most part, granulites resulting from subsolidus recrystallization of norites, anorthosites or gabbros. This metamorphism appears to have occurred prior to the impact event forming 61175.

Winzer, S. R.↗

Quantifying Uncertainty of Landing and Takeoff Noise for Commercial Supersonic Aircraft

Of the many challenges faced by manufacturers attempting to offer supersonic travel to the public, the uncertainty in predicting the noise of these aircraft in airport operations has an immediate impact. No noise regulation exists in FAA or ICAO for certifying such aircraft, as these organization require solid data, usually from existing aircraft. Manufacturers are taking large risks to design a vehicle not knowing whether it will be allowed to fly. A partial solution to this conundrum is to use physics-based simulations to provide the “data” used to calibrate system-level prediction methods, carefully documenting the uncertainty of the method for application to supersonic aircraft. A close look at the accuracy of empirical prediction methods points to areas where improvements need to be made if noise studies of supersonic aircraft are to be useful. As NASA embarks on a focused research program to improve predictions of noise from the noise-dominant propulsion noise of commercial supersonic aircraft, this paper documents the work done to baseline the uncertainties found in today’s noise prediction methods. A relatively simplistic method was developed, summarizing the error of the empirical methods on a component basis and following their impact on the total aircraft during landing and takeoff operations using Monte Carlo analysis. By this method it is found that current empirical noise prediction methods have an uncertainty of 1.5 EPNdB cumulative for propulsion noise of a representative conventional subsonic passenger aircraft. When applied to likely near-term supersonic commercial aircraft, the uncertainty is 7.6 EPNdB cumulative, a difference that must be reduced if the prediction methods are to guide decision makers.

Airport noise↗

Mars - Stratigraphy and gravimetry of Olympus Mons and its aureole

The relative ages of the major geologic units on and around Olympus Mons are considered, together with an interpretation of the gravity anomaly found for this area. The crater data for this investigation have been acquired and interpreted according to the method outlined by Neukum and Hiller (1981). After careful geological mapping, craters clearly identified as impacts are measured and counted. Crater frequency values per sq km for craters greater than or equal to 1 km ('crater retention ages') are read from the individual counts by fitting the Martian cumulative crater production size-frequency distribution to the individual counts. In addition to age dating, the problem of the origin and nature of the aureole materials using gravity data is addressed. This is done by determining whether the line-of-sight gravity extending from Olympus Mons to the northwestern part of the aureole can be explained by the aureole masses alone or whether additional high-density intrusive masses must be assumed in the aureola area.

Hiller, K. H.↗