Search NASA⌕ Search

SEARCH · Search NASA

Results for “current suppression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Neutrinos for TeV neutralinos

One of the most well-founded candidates for dark matter remains a split-supersymmetry (SUSY) model with a Higgsino- or winolike lightest superpartner and the grander SUSY model providing answers for the hierarchy problem and grand unified theory scale unification. The relatively heavy scalar superpartners imply such models would not yet be seen at collider experiments, and mixing-suppressed couplings place such models outside the reach of current direct detection experiments. As such particles annihilate fairly readily to electroweak bosons, a significant neutrino signal can arise near the Galactic Center that may be visible to dedicated searches at current and future neutrino telescopes. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2024

Aging Mechanisms of Broad Area ~800 nm Laser Diodes

Here, this work presents a comprehensive study of early aging behavior (<500 hr) in ~800 nm, phosphide-based laser diodes grown by solid-source MBE with different oxygen concentration levels incorporated into the diode epitaxial layers during growth. The data indicate that lasing characteristics prior to aging are degraded by oxygen introduction, but the gradual power degradation rate after the onset of aging is not a strong function of oxygen at these concentration levels. Devices with oxygen concentrations of ~2.5 × 10 15 cm -3 showed significantly longer delay before the onset of aging (incubation time) than devices with less than 1 × 10 15 cm -3 oxygen. Generation-Recombination current and Laser Beam Induced Current measurements indicate that defect densities and aggregation are suppressed at the facets by oxygen, which can explain longer incubation times. Diagnostic data and parametric fits to diode simulation models show that increased cavity optical loss and defect density are primarily responsible for gradual power degradation during aging, rather than changes in nonradiative recombination. Mechanisms are proposed that explain this behavior, based on density functional theory (DFT) simulations and known recombination-enhanced defect generation phenomena.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Synthesis and electrical behavior of VO 2 thin films grown on SrRuO 3 electrode layers

VO 2 thin films were grown on conducting oxide underlayer SrRuO 3 buffered SrTiO 3 (111) and Si/SiO 2 substrates, respectively, using sputtering. X-ray diffraction phi-scans revealed the epitaxial nature of the VO 2 films grown on SrRuO 3 buffered SrTiO 3 and polycrystalline structure for films grown on SrRuO 3 buffered Si/SiO 2 . X-ray photoelectron spectroscopy confirms a dominant presence of V 4+ in both films and establishes a high-quality growth of single-phase VO 2 films. Temperature and electric-field driven metal-insulator-transition in both the in-plane and out-of-plane configurations were investigated. Depending on the configuration, the resistance change across the metal-insulator-transition varies from a factor of 1.57–3. The measured resistance in each state as well as the magnitude of resistance change were similar during temperature and electric-field driven metal-insulator-transition. To shed light on the suppressed metal-insulator-transition characteristics due to the current shunting effect from conducting SrRuO 3 bottom electrode, a distributed resistance network model is proposed and benchmarked against reports from the literature. Here, the results demonstrate the growth of high-quality VO 2 on conducting SrRuO 3 layers and their electrical behavior, which is of particular interest for all-oxide electronic devices utilizing phase transitions such as resistive memory and neuromorphic oscillators.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Chalcogenide phase-change material advances programmable terahertz metamaterials: a non-volatile perspective for reconfigurable intelligent surfaces

Terahertz (THz) waves have gained considerable attention in the rising 6G communication due to their large bandwidth. However, the cost and power consumption become the major constraints for the commercialization of 6G THz systems as the frequency increases. Reconfigurable intelligent surface (RIS) comprising active metasurfaces and digital controllers has been proposed for beamforming in the 6G multiple-input-multiple-output systems, showing good potential to suppress the system size, weight, and power consumption (SWaP). Currently, their controlling diodes can hardly work up to THz frequencies. Therefore, several active stimuli have been investigated as alternatives. Among them, chalcogenide phase-change material Ge 2 Sb 2 Te 5 (GST) addresses large modulation depth, picosecond switching speed, and non-volatile properties. Notably, the non-volatile GST may enable RIS systems with memory and low control power. This work briefly reviews the advances of GST-tuned THz metamaterials (MTMs), discusses the current obstacles to overcome, and gives a perspective of GST applications in the rising 6G communications.

6G↗
DOE OSTI2021

Suppression of ITG turbulence due to spectral shift during biasing induced H-mode on HBT-EP

Investigations of biasing induced H-mode discharges on HBT-EP show that the edge turbulence is consistent with the ion temperature gradient) mode and have allowed for the controlled observation of the effect of applied flow shear on the turbulence. Measurements of the radial wavenumber spectrum of floating potentials at the edge show that the turbulence intensity decreases with increasing shift in the spectrum average &#x27E8; k r &#x27E9; when increasing amounts of bias probe voltage (and increasing amounts of flow shear) is applied. This is in agreement with the spectral shift model [Staebler et al., Phys. Rev. Lett. 110, 055003 2013] for turbulence suppression via sheared flow. A shift in the wavenumber spectrum occurs at applied electrode voltages and currents below the threshold needed for an L–H transition, and a dithering transition is obtained when biasing near the threshold. Suppression of blob-filament turbulence in the scrape-off layer (SOL) precedes the L–H transition, with the SOL turbulence remaining low throughout the dithering phase, despite the modulation of turbulence levels in the nearby edge. This demonstrates that the SOL turbulence “decouples” from the edge turbulence. The spectral shift in the measured radial wavenumber is corroborated by the direct measurement of eddy tilt angle using a novel time delay analysis technique first developed for Doppler reflectometry [Pinzon et al., Plasma Phys. Controlled Fusion 61, 105009 (2019)] but adapted here for floating potential measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

The Dependence of Electron-only Magnetic Reconnection on Plasma Beta and Magnetic Shear: Theory and Observations

We investigate the onset conditions for electron-only magnetic reconnection through an analysis of 86 reconnection events observed by the Magnetospheric Multiscale mission in magnetosheath and magnetospheric current sheets. Our study presents the first observational evidence that the occurrence of electron-only reconnection depends on both the magnetic-field shear angle (θ) across the current sheet and the cross-sheet electron beta jump, quantified either by the inflow electron beta difference (Δβ e ) or by a modified electron beta jump (Δβ$^*_e$) defined by the cross-sheet electron pressure difference normalized by the average of the inflow magnetic pressure in the two inflow regions. We extend the diamagnetic-drift suppression mechanism from standard reconnection to electron-only reconnection by deriving relations applicable to electron-scale current sheets. Using scaling estimates, the electron-only reconnection suppression relation is derived as Δβ$^*_e$ ≳ 2(L/d e ) tan (θ/2), while a natural extension of the ion-coupled reconnection suppression criterion is Δβ e ≳ 2(L/d e ) tan (θ/2). At low Δβ e and Δβ$^*_e$ values, reconnection is detected across a large range of magnetic shear (from low to high), whereas high Δβ e and Δβ$^*_e$ conditions restrict reconnection to large shear configurations: shear angles as small as θ ≈ 5° occur when Δβ e (or Δβ$^*_e$) ≲0.1. However, only events exceeding θ ≳ 70° are found when Δβ e ≳ 1.0; this apparent restriction weakens when employing Δβ$^*_e$, as the corresponding data points shift toward smaller values of the modified electron beta jump. These findings quantitatively support theoretical predictions of reconnection suppression in high-β e plasmas at low shears, attributed to X-line drift induced by pressure gradients across electron-scale current sheets.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Ab initio calculation of the β-decay spectrum of 6 He

Here, we calculate the β spectrum in the decay of 6 He using quantum Monte Carlo methods with nuclear interactions derived from chiral effective field theory and consistent weak vector and axial currents. We work at second order in the multipole expansion, retaining terms suppressed by O(q 2 /m$^{2}_{π}$), where q denotes low-energy scales such as the reaction’s Q value or the electron energy, and m π is the pion mass. We go beyond the impulse approximation by including the effects of two-body vector and axial currents. We estimate the theoretical error on the spectrum by using four potential models in the Norfolk family of local two- and three-nucleon interactions, which have different cutoffs, fit two-nucleon data up to different energies, and use different observables to determine the couplings in the three-body force. We find the theoretical uncertainty on the β spectrum, normalized by the total rate, to be well below the permille level, and to receive contributions of comparable size from first- and second-order corrections in the multipole expansion. We consider corrections to the β decay spectrum induced by beyond-standard-model charged-current interactions in the standard model effective field theory, with and without sterile neutrinos, and discuss the sensitivity of the next generation of experiments to these interactions.

6 ≤ A ≤ 19↗
DOE OSTI2021

Pressure-induced suppression of Jahn–Teller distortions and enhanced electronic properties in high-entropy oxide (Mg 0.2 Ni 0.2 Co 0.2 Zn 0.2 Cu 0.2 )O

Jahn–Teller distortions are often observed in Cu II -containing complex oxides resulting in remarkable changes of physical properties. Tuning the Jahn–Teller distortions with pressure has attracted considerable interest but is less studied in Cu II -containing high-entropy oxides (HEOs). We found that pressure can suppress the structural distortions originating from the Jahn–Teller effect of CuO 6 octahedra in the rock salt-type (Mg 0.2 Ni 0.2 Co 0.2 Zn 0.2 Cu 0.2 )O HEO and significantly modify its electronic properties. Synchrotron x-ray diffraction shows that the structural distortions arising from the Jahn–Teller effect of CuO 6 octahedra are progressively suppressed, and the distorted structure evolves into a nearly ideal form under compression. Alternating current impedance and ultraviolet-visible absorption measurements reveal a dramatic resistance drop by more than three orders of magnitude and an obvious bandgap decrease in ~0.1 eV, respectively, accompanied by the pressure-induced suppression of structural distortions. Our study presents a promising route for tuning the structural distortions and the electronic structures of Cu II -containing HEOs for optimizing materials functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quasi-linear toroidal simulations of resonant magnetic perturbations in eight ITER H-mode scenarios

Abstract Both linear and quasi-linear aspects of the plasma response to the resonant magnetic perturbation (RMP) field are numerically investigated for various H-mode scenarios in ITER, covering the pre-fusion power operation and the fusion power operation phases. Linear response computations for eight ITER scenarios, with varying plasma current and toroidal magnetic field, reveal that the best coil current phasing for controlling the type-I edge localized modes (ELMs) scales roughly linearly with the edge safety factor. The coil phasing is defined as the relative toroidal phase of the coil currents between different rows, for a given toroidal harmonic. Quasi-linear initial value simulation, which is the focus of the present study, shows that application of the n = 3 ( n is the toroidal mode number) RMP field has a minimum side effect on the plasma core momentum confinement but potentially a large effect on the global particle transport. Generally, the RMP field with the best (worst) coil phasing for ELM control produces the strongest (weakest) effect on the plasma edge flow and the overall density. This robustly holds for all eight ITER scenarios. Consequently, in order to minimize the RMP induced side effects while achieving ELM control (suppression) in ITER, a compromise is necessary in choosing the coil current configuration.

Physics↗
DOE OSTI2023

Long-term durability test of highly efficient membrane electrode assemblies for anion exchange membrane seawater electrolyzers

Direct seawater electrolysis faces fundamental electrochemical challenges, such as suppression of chlorine adsorption and/or evolution reactions that poison the current state-of-the-art anode catalysts and accelerate the degradation of the anion exchange membrane (AEM). The technically favored solution path for addressing these issues includes development of novel selective catalysts and implementation of limited operating conditions. Therefore, development of highly active, selective, cost-effective, and stable seawater-splitting catalysts is required for a successful commercialization of the AEM water electrolyzers (AEMWEs). In this work, we report for the first-time an extended operation for over 1000 h of advanced AEMWEs, operating directly with seawater. To fabricate the membrane electrode assemblies (MEAs), catalyst coated electrodes (CCEs) are assembled with Sustainion® X37-50 grade T anion exchange membranes. The anode CCEs are fabricated by spraying an ink prepared from nanostructured NiFe-layered double hydroxide (LDH) catalyst that are synthesized by the solvothermal method and deposited directly onto platinized titanium porous transport layers (PTLs). The cathode CCEs are prepared by spraying an ink prepared from commercial Renay-Nickel catalyst onto a nickel fiber felt. As prepared AEM electrolyzer cells operated with seawater and demonstrated better than previously reported in the literature performance of over 1000 h of operation at a constant current density of 300 mA cm –2 .

25 ENERGY STORAGE↗
DOE OSTI2020

Cause and impact of low-frequency chirping modes in DIII-D hybrid discharges

Significant variations in MHD activity and fast-ion transport are observed in the DIIID high-beta, steady-state hybrid discharges with a mixture of Electron Cyclotron (EC) waves and Neutral Beam Injection (NBI). When Electron Cyclotron Heating (ECH) or Current Drive (ECCD) is applied, Alfven Eigenmodes (AEs) are usually suppressed and replaced by low-frequency bursting modes. The analysis of a recently compiled database of hybrid discharges suggests that the change of the fast-ion pressure especially the perpendicular pressure is the main factor responsible for the instability transition. The lower ratio of fast-ion injection speed v inj to Alfven speed v alfven and slight drop of safety factor q min during ECCD may also facilitate the transition. The database shows that AEs mainly occur when the fast-ion fraction P f /P total is less than 0.53 and v inj /v alfven is greater than 0.50, while low-frequency bursting modes appear in the opposite regime. In this research, P f and P total are the central fast-ion pressure from classical prediction and total plasma pressure, respectively. The reason why the instability transition correlates with P f /P total and v inj /v alfven is that they can significantly modify the drive of low-frequency bursting modes and AEs. The explanation is supported by the observation that low-frequency bursting modes are rarely seen in the hybrids with NBI only, with EC waves and counter-NBI, or with high plasma density. A careful check of the low-frequency bursting modes suggests that they are mainly chirping (neoclassical) tearing modes [referred to as chirping (N)TM], i.e. the mode frequency firstly jumps up from the steady (N)TM frequency, then chirps down, and finally returns to the steady (N)TM frequency. Sometimes, the (N)TMs are fully stabilized and replaced with pure fishbones. Lastly, the resonance condition calculation and ’Kick’ model simulations suggest that (N)TMs and fishbones can interact through modification of the fast ion distribution in phase space, which influences the drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Achieving Higher Order Accuracy in Space in Hydrodynamic Simulations of Self-Gravitating Gas

Modern astrophysical simulation codes employ a variety of numerical algorithms capable of achieving higher-order accuracy in both space and time. Albeit they succeed in achieving an effective higher spatial resolution and in suppressing the numerical damping of waves, to our knowledge, all current astrophysical simulations invoking self-gravity are limited to second-order accuracy in space. If we can devise an algorithm to evaluate self-gravity with a higher-order spatial accuracy, we can better the evaluation of the gravitational acceleration and gravitational energy release which dictate the evolution of many astrophysical systems. Herein, we present a numerical algorithm for self-gravitating hydrodynamics capable of achieving fourth-order accuracy for a given density distribution on a Cartesian uniform grid. First, we derive the cell-averaged gravitational potential at fourth-order accuracy from the cell-averaged density by solving the Poisson equation. Next, we obtain the cell average of the product of the density and gravitational acceleration, which differs from the cell-averaged density multiplied by the cell-averaged gravitational acceleration. We then show the verification of the algorithm by applying it to critical test problems: (1) maintaining equilibria of self-gravitating slabs, even upon advection, (2) evolving a polytropic sphere with a massive power-law envelope, and (3) conservation of specific entropy during the propagation of a sound wave.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Equilibration of the planar modes of ultracold two-dimensional ion crystals in a Penning trap

In this work, planar thermal equilibration is studied using direct numerical simulations of ultracold two-dimensional ion crystals in a Penning trap with a rotating wall. The large magnetic field of the trap splits the modes that describe in-plane motion of the ions into two branches: high-frequency cyclotron modes dominated by kinetic energy and low-frequency E × B modes dominated by potential energy associated with thermal position displacements. Using an eigenmode analysis we extract the equilibration rate between these two branches as a function of the ratio of the frequencies that characterize the two branches and observe this equilibration rate to be exponentially suppressed as the ratio increases. Under experimental conditions relevant for current work at NIST, the predicted equilibration time is orders of magnitude longer than any relevant experimental timescales. We also study the coupling rate dependence on the initial energy of the planar modes and the number of ions. In addition, we show how increasing the rotating wall strength improves crystal stability. These details of in-plane mode dynamics help set the stage for developing strategies to efficiently cool the in-plane modes and improve the performance of single plane ion crystals for quantum information processing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Achieving Higher Order Accuracy in Space in Hydrodynamic Simulations of Self-Gravitating Gas

Modern astrophysical simulation codes employ a variety of numerical algorithms capable of achieving higher-order accuracy in both space and time. Albeit they succeed in achieving an effective higher spatial resolution and in suppressing the numerical damping of waves, to our knowledge, all current astrophysical simulations invoking self-gravity are limited to second-order accuracy in space. If we can devise an algorithm to evaluate self-gravity with a higher-order spatial accuracy, we can better the evaluation of the gravitational acceleration and gravitational energy release which dictate the evolution of many astrophysical systems. Herein, we present a numerical algorithm for self-gravitating hydrodynamics capable of achieving fourth order accuracy for a given density distribution on a Cartesian uniform grid. First, we derive the cell-averaged gravitational potential at fourth-order accuracy from the cell-averaged density by solving the Poisson equation. Next, we obtain the cell average of the product of the density and gravitational acceleration, which differs from the cell-averaged density multiplied by the cell-averaged gravitational acceleration. We then show the verification of the algorithm by applying it to critical test problems: (1) maintaining equilibria of self-gravitating slabs, even upon advection, (2) evolving a polytropic sphere with a massive power-law envelope, and (3) conservation of specific entropy during the propagation of a sound wave.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Simulation of Bunch Formation for the Mu2e Experiment

The Fermilab Recycler is an 8 GeV storage ring composed of permanent magnets that was crucial to the success of the Fermilab Tevatron Collider program. It is currently being used to slip-stack protons for the high energy neutrino program and to re-bunch protons for use in the Muon g-2 and Mu2e experiments. For the latter applications, the Recycler re-bunches each 1.6 µs "batch" from the Fermilab Booster into four 2.5 MHz bunches. For the Mu2e experiment, it is crucial that beam more than 125 ns from the nominal bunch center be suppressed by at least a factor of 1E-5. While bunch formation is currently in operation for the g-2 experiment, this out of time requirement has not been met, and the reason is not understood. This work presents a simulation of bunch formation in the Recycler, in an effort to understand the reason for this excessive out of time beam and to search for a way to reduce it.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Chiral effective field theory calculations of weak transitions in light nuclei

In this work, we report quantum Monte Carlo calculations of weak transitions in A≤10 nuclei, based on the Norfolk two- and three-nucleon chiral interactions, and associated one- and two-body axial currents. Furthermore, we find that the contribution from two-body currents is at the 2–3% level, with the exception of matrix elements entering the rates of 8Li, 8B, and 8He β decay. These matrix elements are suppressed in impulse approximation based on the (leading order) Gamow Teller transition operator alone; two-body currents provide a 20–30% correction, which is, however, insufficient to bring theory in agreement with experimental data. For the other transitions, the agreement with the data is satisfactory, and the results exhibit a negligible to mild model dependence when different combinations of Norfolk interactions are utilized to construct the nuclear wave functions. We report a complete study of two-body weak transition densities which reveals the expected universal behavior of two-body currents at short distances throughout the range of A=3 to A=10 systems considered here.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Electro-strengthening of the additively manufactured Ti–6Al–4V alloy

Structure-property-processing relationship has been studied in additively manufactured Ti–6Al–4V alloy. The processing was performed using in-situ electron microscope (EM) at a moderate current density of 5 × 105 A/cm2 applied for 5 min, and by suppressing Joule heating with massive heat sinks such that the temperature rise was <180 °C and the mechanical properties were not compromised. Overall, the results show that while the grain size increased by ~15%, the nanohardness increased by 16%. This is attributed to the pronounced dislocation generation, regeneration, and clustering as well as defect healing. Ultimately, there is a reduction in the residual strain and a significant increase in the intrinsic strength as evidenced by the high Taylor factor of the electric current processed specimen. This novel processing technique represents an alternative pathway for active controlling of microstructure and internal defects for parts that might be sensitive to high-temperature processing or conventional methods.

36 MATERIALS SCIENCE↗