Search NASA⌕ Search

SEARCH · Search NASA

Results for “data processing and archiving”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

The ALEXIS data processing package: An IDL based system

The Array of Low Energy X-ray Imaging Sensors (ALEXIS) experiment consists of a mini-satellite containing six wide angle EUV/ultrasoft x-ray telescopes. Its purpose is to map out the sky in three narrow (approximately 5 percent) bandpasses around 66, 71, and 93 eV. The 66 and 71 eV bandpasses are centered on intense Fe emission lines which are characteristic of million degree plasmas such as the one thought to produce the soft x-ray background. The 93 eV bandpass is not near any strong emission lines and is more sensitive to continuum sources. The mission will be launched on the Pegasus Air Launched Vehicle in the second half of 1992 into a 400-nautical-mile, high inclination orbit and will be controlled entirely from a small ground station located at Los Alamos. The project is a collaborative effort between Los Alamos National Laboratory, Sandia National Laboratory, and the University of California-Berkeley Space Sciences Laboratory. The six telescopes are arranged in three pairs. As the satellite spins twice a minute they scan the entire anti-solar hemisphere. Each f/1 telescope consists of a spherical, multilayer-coated mirror with a curved, microchannel plate detector located at the prime focus. The multilayer coatings determine the bandpasses of the telescopes. The field of view of each telescope is 30 degrees with a spatial resolution of 0.5 degree, limited by spherical aberration. The data processing requirements for ALEXIS are large. Each event is one of the six telescopes is telemetered to the ground with its time of arrival and position on the detector. This information must be folded with the aspect solution for the satellite to reconstruct the direction on the sky from which the photon came. Because of the way the six telescopes scan the sky, the effective exposure calculation is also very computationally intensive. ALEXIS may generate up to 100 megabytes of raw data per day, which are converted into a gigabyte per day of processed data. While the processing job for ALEXIS is sizable, the programming staff is small. To maximize programming efficiency, and to make the best use of tools available in the public domain, we chose IDL as our software development platform. IDL was used from the start of instrument development through flight. We use IDL as a top-level executive for the processing tasks (replacing Unix shell scripts), as a device independent graphics engine, as a database manager, and as a final data manipulator. IDL routines spawn special purpose C programs to perform detailed telemetry deconvolution and other specialized functions. We discuss the use of IDL and C within the processing and archiving strategy for the ALEXIS data anlaysis system as implemented on a SPARCstation platform. We also show results from our End-to-End software simulation capability as processed by our analysis codes.

Bloch, J. J.↗
NASA NTRS2017

Data Recovery Effort of Nimbus Era Observations by the NASA GES DISC

NASA launched seven Nimbus meteorological satellites in the 1960s and 70s. These satellites carried instruments for making observations of the Earth in the visible, infrared, ultraviolet, and microwave wavelengths. The original data archive consisted of a combination of magnetic tapes and various film media. As these media are well past their expected end of life, the valuable data they contain are now being migrated to the GES DISC modern online archive. The process involves recovering the digital data files from the tapes as well as scanning images of the data from film strips. This presentation will address the status and challenges of recovering the Nimbus data. The old data products were written on now obsolete hardware systems and outdated file formats. They lack any metadata standards and each product is often written in its own proprietary file structure. This requires creating metadata by reading the contents of the old data files. The job is tedious and laborious, as documentation may be incomplete, data files and tapes are sometimes corrupted, or were improperly copied at the time they were created.

Nimbus↗
NASA NTRS1997

Case Study of an Object-Oriented System: EOSDIS

Mission to Planet Earth (MTPE) is a long-term NASA research mission to study the processes leading to global climate change. The Earth Observing System (EOS) is a NASA campaign of satellite observatories that are a major component of MTPE. The EOS Data and Information System (EOSDIS) is another component of MTPE that will provide the Earth science community with easy, affordable, and reliable access to Earth science data. EOSDIS is a distributed system, with major facilities at six Distributed Active Archive Centers (DAACS) located throughout the United States. The EOSDIS software architecture is being designed to receive, process, and archive several terabytes of science data on a daily basis. Thousands of science users and perhaps several hundred thousands of non-science users are expected to access the system. While there are many segments in EOSDIS (e.g., flight operations, network) this case study discusses the development of the science data processing segment (SDPS). We briefly review the architecture of the system, the goals of the SDPS, and the development progress to date. This study highlights key software development challenges, experiences integrating COTS, and the difficulties of managing a complex system development effort.

Behnke, Jeanne↗
NASA NTRS1993

Recent advances and plans in processing and geocoding of SAR data at the DFD

Because of the needs of future projects like ENVISAT and the experiences made with the current operational ERS-1 facilities, a radical change in the synthetic aperture radar (SAR) processing scenarios can be predicted for the next years. At the German PAF several new developments were initialized which are driven mainly either by user needs or by system and operational constraints ('lessons learned'). At the end there will be a major simplification and uniformation of all used computer systems. Especially the following changes are likely to be implemented at the German PAF: transcription before archiving, processing of all standard products with high throughput directly at the receiving stations, processing of special 'high-valued' products at the PAF, usage of a single type of processor hardware, implementation of a large and fast on-line data archive, and improved and unified fast data network between the processing and archiving facilities. A short description of the current operational SAR facilities as well as the future implementations are given.

Noack, W.↗
NASA NTRS2020

NASA ESDS Citizen Science Data Working Group

This document provides guidelines for legal, policy, and ethical issues; standards for citizen science data collection and management; information on ensuring usability of citizen science data and communication regarding its use; and best practices for long-term archival of citizen science data.Section1 contains a detailed discussion of policy, ethical, and legal considerations influencing citizen science data collection. Section 2 considers standards for documentation, including documentation of instrumentation, procedures, and the data itself. It concludes with a discussion of how citizen science data should be attributed. Section 3 provides guidance about how to ensure citizen science data are collected and stored in a useable way. It also considers how NASA and data producers should notify the scientific community, including citizen scientists and the public, about citizen science datasets and the scientific conclusions reached using them. Finally, Section 4 provides detailed information regarding what should be archived from projects using a citizen science approach, including data and code. It provides guidance about archive location, process, and timeframe, as well as information about data access and distribution services provided by NASA that may be relevant to data producers working with citizen scientists.

Citizen Science↗
DOE OSTI2026

Adapt: A Weather Radar Data Analysis and Nowcasting Platform for Informed Adaptive Scanning

SF-26-021 Adapt is a data processing platform for real-time data analysis, short term prediction of targets convective cells and tracking for archived data. It provides tools for downloading, processing, segmenting, projecting, analyzing, and visualizing storm cell data from weather radar. The pipeline includes cell detection, motion estimation using optical flow, cell property extraction, and persistence to NetCDF and SQLite/Parquet for guiding adaptive scanning.

Raut, Bhupendra Ashokrao [Argonne National Laborat↗
NASA NTRS2003

Preservation and Enhancement of the Spacewatch Data Archives

In March of 1998, the asteroid 1997 XF11 was announced to be potentially hazardous after being tracked over 90 days. A potential two year wait for confirming observations was shortened to under 24 hours because of the existence of archived photographic prediscovery images. Spacewatch was a pioneer in using CCD scanning and possesses a valuable digital archive of its scans. Unfortunately these data are aging on magnetic tape and will soon be lost. Since 1990, the Spacewatch project gathered some 1.5 Terabytes of scan data covering roughly 75,000 degrees of sky to a limiting magnitude of V = 21.5. The data have not yet been mined for all of their asteroids for scientific studies and orbit determination. Spacewatch's real-time motion detection program MODP was constrained by the computers of the era to use simplified image processing algorithms at a reduced efficiency. Jedicke and Herron estimated MODP's efficiency at finding asteroids to be approximately 60 percent to V=18 and improving somewhat thereafter. This lead to a substantial bias correction in their analyses. Larsen has developed a MODP replacement capable in excess of 90 percent efficiency in the same range and able to push a magnitude fainter in completeness. We propose a program of post-processing and re-archiving Spacewatch data. Our scans would be transferred from tape to CD-ROMs and converted to FITS images -- establishing a consistent data format and media for both past and future Spacewatch observations. Larsen's MODP replacement would mine these data for previously undetected motions, which would be made available to the Minor Planet Center and our ongoing asteroid population studies. A searchable observation record would be made generally available for prediscovery work. We estimate the net asteroid yield of this proposal is equivalent to three full years of Spacewatch operations.

Larsen, Jeffrey A.↗
NASA NTRSDate not supplied

Improving Data Discovery, Analysis, and Visualizations With Cloud-Based User Services

The Global Hydrometeorology Resource Center (GHRC) Distributed Active Archive Center (DAAC) is one of 12 DAACs managed by the United States National Aeronautics and Space Administration (NASA) Earth Science Data and Information System (ESDIS) project [1]. GHRC and the other DAACs are designed to process, archive, document, and distribute NASA Earth-observing data, ranging from satellite missions to field campaigns [2]. A major goal of the DAACs is to enable science with these data. Science enabling can be difficult as datasets can be very large, use multiple formats, come from numerous platforms, and require three-dimensional visualization. GHRC is using its expertise with cloud-based technologies to develop open source and open science tools to empower users to explore, coincidentally visualize, and analyze multiple datasets. Being open source, the user community can develop visualizations for their own datasets. This presentation will expand on this objective and highlight the capabilities available to the international community now.

GHRC↗
NASA NTRS1999

A Complete UV Atlas of Standard Stars

This program is an Astrophysics Data Program (ADP) contract, together with a follow-on contract (S- 57791 -Z), intended to produce a comprehensive ultraviolet spectral atlas of stars based on the data in the IUE Final Archive. The data in the Final Archive were uniformly processed by the NEWSIPS pipeline system. The NEWSIPS gives an improved signal-to-noise ratio for the data that will be especially beneficial to low signal portions of the spectra; and it also gives more accurate fluxes for stars by adopting the latest absolute calibration and measured instrument parameters. Therefore, this atlas provides more uniform and accurate data than the version previously published.

Wu, Chi-Chao↗
NASA NTRS1991

Data compression for data archival, browse or quick-look

Soon after space and Earth science data is collected, it is stored in one or more archival facilities for later retrieval and analysis. Since the purpose of the archival process is to keep an accurate and complete record of data, any data compression used in an archival system must be lossless, and protect against propagation of error in the storage media. A browse capability for space and Earth science data is needed to enable scientists to check the appropriateness and quality of particular data sets before obtaining the full data set(s) for detailed analysis. Browse data produced for these purposes could be used to facilitate the retrieval of data from an archival facility. Quick-look data is data obtained directly from the sensor for either previewing the data or for an application that requires very timely analysis of the space or Earth science data. Two main differences between data compression techniques appropriate to browse and quick-look cases, are that quick-look can be more specifically tailored, and it must be limited in complexity by the relatively limited computational power available on space platforms.

Dozier, Jeff↗
NASA NTRS2015

The Suomi National Polar-Orbiting Partnership (SNPP): Continuing NASA Research and Applications

The Suomi National Polar-orbiting Partnership (SNPP) satellite was successfully launched into a polar orbit on October 28, 2011 carrying 5 remote sensing instruments designed to provide data to improve weather forecasts and to increase understanding of long-term climate change. SNPP provides operational continuity of satellite-based observations for NOAA's Polar-orbiting Operational Environmental Satellites (POES) and continues the long-term record of climate quality observations established by NASA's Earth Observing System (EOS) satellites. In the 2003 to 2011 pre-launch timeframe, NASA's SNPP Science Team assessed the adequacy of the operational Raw Data Records (RDRs), Sensor Data Records (SDRs), and Environmental Data Records (EDRs) from the SNPP instruments for use in NASA Earth Science research, examined the operational algorithms used to produce those data records, and proposed a path forward for the production of climate quality products from SNPP. In order to perform these tasks, a distributed data system, the NASA Science Data Segment (SDS), ingested RDRs, SDRs, and EDRs from the NOAA Archive and Distribution and Interface Data Processing Segments, ADS and IDPS, respectively. The SDS also obtained operational algorithms for evaluation purposes from the NOAA Government Resource for Algorithm Verification, Independent Testing and Evaluation (GRAVITE). Within the NASA SDS, five Product Evaluation and Test Elements (PEATEs) received, ingested, and stored data and performed NASA's data processing, evaluation, and analysis activities. The distributed nature of this data distribution system was established by physically housing each PEATE within one of five Climate Analysis Research Systems (CARS) located at either at a NASA or a university institution. The CARS were organized around 5 key EDRs directly in support of the following NASA Earth Science focus areas: atmospheric sounding, ocean, land, ozone, and atmospheric composition products. The PEATES provided the system level interface with members of the NASA SNPP Science Team and other science investigators within each CARS. A sixth Earth Radiation Budget CARS was established at NASA Langley Research Center (NASA LaRC) to support instrument performance, data evaluation, and analysis for the SNPP Clouds and the Earth's Radiant Budget Energy System (CERES) instrument. Following the 2011 launch of SNPP, spacecraft commissioning, and instrument activation, the NASA SNPP Science Team evaluated the operational RDRs, SDRs, and EDRs produced by the NOAA ADS and IDPS. A key part in that evaluation was the NASA Science Team's independent processing of operational RDRs and SDRs to EDRs using the latest NASA science algorithms. The NASA science evaluation was completed in the December 2012 to April 2014 timeframe with the release of a series of NASA Science Team Discipline Reports. In summary, these reports indicated that the RDRs produced by the SNPP instruments were of sufficiently high quality to be used to create data products suitable for NASA Earth System science and applications. However, the quality of the SDRs and EDRs were found to vary greatly when considering suitability for NASA science. The need for improvements in operational algorithms, adoption of different algorithmic approaches, greater monitoring of on-orbit instrument calibration, greater attention to data product validation, and data reprocessing were prominent findings in the reports. In response to these findings, NASA, in late 2013, directed the NASA SNPP Science Team to use SNPP instrument data to develop data products of sufficiently high quality to enable the continuation of EOS time series data records and to develop innovative, practical applications of SNPP data. This direction necessitated a transition of the SDS data system from its pre-launch assessment mode to one of full data processing and production. To do this, the PEATES, which served as NASA's data product testing environment during the prelaunch and early on-orbit periods, were transitioned to Science Investigator-led Processing Systems (SIPS). The distributed data architecture was maintained in this new system by locating the SIPS at the same institutions at which the CARS and PEATES were located. The SIPS acquire raw SNPP instrument Level 0 (i.e. RDR) data over the full SNPP mission from the NOAA ADS and IDPS through the NASA SDS Data Distribution and Depository Element (SD3E). The SIPS process those data into NASA Level 1, Level 2, and global, gridded Level 3 standard products using peer-reviewed algorithms provided by members of the NASA Science Team. The SIPS work with the NASA SNPP Science Team in obtaining enhanced, refined, or alternate real-time algorithms to support the capabilities of the Direct Readout Laboratory (DRL). All data products, algorithm source codes, coefficients, and auxiliary data used in product generation are archived in an assigned NASA Distributed Active Archive Center (DAAC).

remote sensing↗
NASA NTRSDate not supplied

New developments in space radiation research at NASA: Annotating data using a novel radiation biology ontology

Like many interdisciplinary sciences, data producers and consumers in the field of radiation biology often use a wide variety of terminology to describe their experiments and data. Furthermore, space systems and technologies are rapidly evolving, and a shared understanding and common terminology for these is also lacking. The efficiency of research organizations can be enhanced by standardizing metadata through the use of knowledge resources like ontologies. Employing a sophisticated model such as a formal ontology to standardize metadata enables automated data acquisition processes and supports more complete, accurate meta-analysis through more efficient and complete data discovery and retrieval, particularly when using multiple data sources. Thus, we developed the Radiation Biology Ontology (RBO) in order to improved radiation biology metadata uniformity and transparency. We used open-source software (the Ontology Development Kit, Protégé and WebProtégé) and worked within the OBO Foundry framework, which includes a set of ontology development principles and practices for ontology consistency, uniformity, and accountability. The RBO has now been incorporated into two radiation research data repositories, NASA’s GeneLab omics database (https://genelab.nasa.gov), and the European Commission STORE database (https://www.storedb.org/). Continuous build integration tools allowed our international RBO collaboration to be more efficient and focus its efforts on semantic model design. Currently, the RBO contains over 300 annotated classes and individuals specific to the study of radiation on biological systems, as well as imports of many additional classes from other OBO Foundry ontologies that relate to and/or provide context for these RBO entities. We publish the RBO through the OBO Foundry, so that it is available for browsing, download, and querying through NCBI Bioportal web site and application programming interface. The NASA Ames Life Science Data Archive (ALSDA) is also in the process of adopting use of the RBO, taking NASA one step closer to a knowledge-based system for space biology data. It is our hope that the global communities of radiation research Investigators, data curators and data analysts can similarly leverage the RBO and will contribute to its further development.

radiation↗
NASA NTRS2007

NASA Tech Briefs, December 2007

Topics include: Ka-Band TWT High-Efficiency Power Combiner for High-Rate Data Transmission; Reusable, Extensible High-Level Data-Distribution Concept; Processing Satellite Imagery To Detect Waste Tire Piles; Monitoring by Use of Clusters of Sensor-Data Vectors; Circuit and Method for Communication Over DC Power Line; Switched Band-Pass Filters for Adaptive Transceivers; Noncoherent DTTLs for Symbol Synchronization; High-Voltage Power Supply With Fast Rise and Fall Times; Waveguide Calibrator for Multi-Element Probe Calibration; Four-Way Ka-Band Power Combiner; Loss-of-Control-Inhibitor Systems for Aircraft; Improved Underwater Excitation-Emission Matrix Fluorometer; Metrology Camera System Using Two-Color Interferometry; Design and Fabrication of High-Efficiency CMOS/CCD Imagers; Foam Core Shielding for Spacecraft CHEM-Based Self-Deploying Planetary Storage Tanks Sequestration of Single-Walled Carbon Nanotubes in a Polymer PPC750 Performance Monitor Application-Program-Installer Builder Using Visual Odometry to Estimate Position and Attitude Design and Data Management System Simple, Script-Based Science Processing Archive Automated Rocket Propulsion Test Management Online Remote Sensing Interface Fusing Image Data for Calculating Position of an Object Implementation of a Point Algorithm for Real-Time Convex Optimization Handling Input and Output for COAMPS Modeling and Grid Generation of Iced Airfoils Automated Identification of Nucleotide Sequences Balloon Design Software Rocket Science 101 Interactive Educational Program Creep Forming of Carbon-Reinforced Ceramic-Matrix Composites Dog-Bone Horns for Piezoelectric Ultrasonic/Sonic Actuators Benchtop Detection of Proteins Recombinant Collagenlike Proteins Remote Sensing of Parasitic Nematodes in Plants Direct Coupling From WGM Resonator Disks to Photodetectors Using Digital Radiography To Image Liquid Nitrogen in Voids Multiple-Parameter, Low-False-Alarm Fire-Detection Systems Mosaic-Detector-Based Fluorescence Spectral Imager Plasmoid Thruster for High Specific-Impulse Propulsion Analysis Method for Quantifying Vehicle Design Goals Improved Tracking of Targets by Cameras on a Mars Rover Sample Caching Subsystem Multistage Passive Cooler for Spaceborne Instruments GVIPS Models and Software Stowable Energy-Absorbing Rocker-Bogie Suspensions

Source record↗
NASA NTRS2017

The Kepler Data Processing Handbook: A Field Guide to Prospecting for Habitable Worlds

The Kepler telescope hurtled into orbit in March 2009, initiating NASA's first mission to discover Earth-size planets orbiting Sun-like stars. Kepler simultaneously collected data for approximately 165,000 target stars at a time over its four-year mission, identifying over 4700 planet candidates, over 2300 confirmed or validated planets, and over 2100 eclipsing binaries. While Kepler was designed to discover exoplanets, the long-term, ultrahigh photometric precision measurements it achieved made it a premier observational facility for stellar astrophysics, especially in the field of asteroseismology, and for variable stars, such as RR Lyrae. The Kepler Science Operations Center (SOC) was developed at NASA Ames Research Center to process the data acquired by Kepler from pixel-level calibrations all the way to identifying transiting planet signatures and subjecting them to a suite of diagnostic tests to establish or break confidence in their planetary nature. Detecting small, rocky planets transiting Sun-like stars presents a variety of daunting challenges, including achieving an unprecedented photometric precision of ~20 ppm on 6.5-hour timescales, and supporting the science operations, management, processing, and repeated reprocessing of the accumulating data stream. A newly revised and expanded version of the Kepler Data Processing Handbook (KDPH) has been released to support the legacy archival products. The KDPH details the theory, design and performance of the algorithms supporting each data processing step. This paper presents an overview of the KDPH and features illustrations of several key algorithms in the Kepler Science Data Processing Pipeline. Kepler was selected as the 10th mission of the Discovery Program. Funding for this mission is provided by NASA, Science Mission Directorate.

high performance computing↗
NASA NTRS1992

Science data processing in the Mission to Planet Earth era

The data-processing systems developed to support NASA's Mission to Planet Earth (MPE) are described in an overview of the system architectures. The MPE program is discussed in terms of flight segments and data types to examine the required elements of the information systems. The data-processing segments are described for the Atmospheric Laboratory for Applications and Science, the Tropical Rainfall Measuring Mission, the Earth Observing System, and the Geostationary Earth Observatory. The data and information systems for the separate segments provide some redundant processing services. Distributed active archive centers are employed for each segment composed of three subelements: (1) a product-generation system, (2) a data archive and distribution system, and (3) an information management system. The data processing design for the MPE is expected to facilitate the understanding of the entire earth system on a global scale.

Goodman, H. M.↗
NASA NTRS2002

Demonstrating Acquisition of Real-Time Thermal Data over Fires Utilizing UAVs

NASA-Ames Research Center, in collaboration with General Atomics Aeronautical Systems, Inc. has been developing real-time data acquisition and information delivery systems employing uninhabited aerial vehicle (UAV) technology for disaster mitigation and assessment demonstrations. Working in conjunction with the US Forest Service, a disaster community agency responsible for wildfire management and mitigation, we developed a large-scale wildfire demonstration called the First Response Experiment (FIRE). During that experiment in late summer 2001, the participants demonstrated the melding of innovative technologies such as UAV platforms, real-time data processing, and data telemetry for quick analysis of a disaster event. The General Atomics ALTUS UAV, the Airborne Infrared Disaster Assessment System (AIRDAS) and Over-The-Horizon (OTH) satellite data telemetry equipment were employed over a controlled burn to test the feasibility of a disaster monitoring and mitigation platform for hazardous duty. The ALTUS UAV was employed to demonstrate the long duration, altitude, and payload capability of unmanned platforms for acquiring disaster related data. The ALTUS has an operational altitude to 45,000 feet (13,700 in), with a flight duration of twenty-four hours and a payload capacity of over 300 lbs. (148.5 kg). This allows the platform to operate under the conditions that would be necessary for monitoring and mitigating disaster events throughout the Unites States. The four channel AIRDAS data (calibrated thermal infrared digital imagery of the fire event) was sent from the ALTUS UAV via a satellite communications system (NERA transponder and INMARSAT satellite) to a data archive server and an image processing work station at NASA-Ames Research Center, 400 miles away.

Wegener, Steven S.↗
NASA NTRS1988

Design of Space Station era mass storage systems

The architecture, components, and technical approach for a Space Station era mass storage system prototype are described. The primary data storage needs call for such functions as line outage recording, rate buffering, data archiving, and level zero type processing. The prototype mass storage system hardware will be configurable to support three modes of operation at up to 300 Mbps. The system architecture consists of two distinct components: a configurable high-level mass storage control system and a basic storage kernal.

Horner, Ward P.↗