Search NASA⌕ Search

SEARCH · Search NASA

Results for “diode model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Impact of doped barriers on the recombination coefficients of c -plane InGaN/GaN single quantum well light-emitting diodes

Differential carrier lifetime measurements were performed on c-plane InGaN/GaN single quantum well (QW) light-emitting diodes (LEDs) of different QW indium compositions as well as with and without doped barriers. Mg-doped p-type and Si-doped n-type barriers close to the QW were used to reduce the net internal electric field in the QW, thereby improving the electron–hole wavefunction overlap on the LEDs. LEDs with doped barriers show short lifetimes and low carrier densities in the active region compared to the reference LEDs. The recombination coefficients in the ABC model were estimated based on the carrier lifetime and quantum efficiency measurements. The improvement in the radiative coefficients in the LEDs with doped barriers coupled with the blueshift of the emission wavelengths indeed indicates an enhancement in wavefunction overlap and a reduction of quantum confined Stark effect as a result of the reduced internal electric field. However, doped barriers also introduce non-radiative recombination centers and thereby increase the Shockley–Read–Hall (SRH) coefficient, although the increment is less for LEDs with high indium composition QWs. As a result, at high indium composition (22%), LEDs with doped barriers outperform the reference LEDs even though the trend is reversed for LEDs with lower indium composition (13.5%). In conclusion, despite the trade-off of higher SRH coefficients, doped barriers are shown to be effective in reducing the internal electric field and increasing the recombination coefficients.

42 ENGINEERING↗
DOE OSTI2025

InAs sidewall tunnel diodes enabled by surface states

Negative differential resistance (NDR), where the device current decreases with increasing bias voltage, is a representative phenomenon where quantum mechanics induces counterintuitive physical behavior and offers promising applications such as high-frequency oscillators, amplifiers, and multilevel logic circuits. While the NDR behavior has been extensively studied in various materials and devices, the role of surface properties in NDR, particularly in InAs-based diodes, remains underexplored. In this work, we report the observation of NDR in vertically structured InAs p + n diodes that exhibit a peak-valley current ratio of ∼6, which is suitably high for applications. Circumference-normalized current–voltage characterization revealed that the NDR originates from band-to-band tunneling between the valence band of p + -InAs and the conduction band of an n + -InAs surface, where the n + surface is due to surface states on otherwise n − -InAs. In addition, by comparing devices with various surface passivation methods (without intentional passivation, benzocyclobutene polymer, and silicon nitride), we found that the surface termination significantly affects the NDR characteristics. We present an equivalent circuit model to explain the observed device behavior. These findings offer insights into surface-enabled NDR phenomena and present new knobs for engineering NDR devices.

Circuit theorems↗
DOE OSTI2022

Nano-porous GaN cladding and scattering loss in edge emitting laser diodes

We report continuous wave operation of electrically injected InGaN laser diodes using nano-porous GaN n-side cladding with 33% porosity. At 454 nm emission wavelength, the pulsed injection slope efficiency is 0.24 W/A with a high loss of 82 cm -1 . The considerable 60 cm -1 of excess loss of the nano-porous clad lasers is attributed to scattering at pores in unintentionally 3% porosified layers, supported by numerical modeling. Simulations comparing porous GaN cladding to AlInN cladding for lasers operating at 589 nm indicate that the porous cladding provides similar internal loss and lower thermal impedance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stable Glasses of Organic Semiconductor Resist Crystallization

The instability of glassy solids poses a key limitation to their use in several technological applications. Well-packed organic glasses, prepared by physical vapor deposition (PVD), have drawn attention recently because they can exhibit significantly higher thermal and chemical stability than glasses prepared from more traditional routes. We show here that PVD glasses can also show enhanced resistance to crystallization. By controlling the deposition temperature, resistance toward crystallization can be enhanced by at least a factor of ten in PVD glasses of the model organic semiconductor Alq3 (tris(8-hydroxyquinolinato) aluminum). PVD glasses of Alq3 first transform into a supercooled liquid before crystallizing. By controlling the deposition temperature, we increase the glass → liquid transformation time thereby also increasing the overall time for crystallization. Furthermore, we thus demonstrate a new strategy to stabilize glasses of organic semiconductors against crystallization, which is a common failure mechanism in organic light emitting diode devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Design and testing of a high perveance sheet beam electron gun

This paper presents the design, prototype engineering, and initial testing of a relatively low-voltage, high aspect ratio electron gun for versatile pulsed power applications. The sheet beam, diode electron gun is designed for (23–25) kV voltage and 6 µA/V1.5, as is required for x-band klystron, as a part of a compact Klylac delivering electron beam energy in the MeV range. The gun prototype was engineered, built, and tested using a Scandinova M1-0.5 modulator. Beam loss on the anode aperture is evaluated from transient waveforms and equivalent circuit modeling.

Instruments & Instrumentation↗
DOE OSTI2021

Role of deep levels and barrier height lowering in current-flow mechanism in 150 μ m thick epitaxial n-type 4H–SiC Schottky barrier radiation detectors

Schottky barrier detectors (SBDs) require larger surface areas than conventional electronics to increase the detection efficiency although such SBDs manifest large diode ideality factors due to inhomogeneous areal distribution of surface barrier height (SBH). Inhomogeneous SBH distributions lead to various current flow mechanisms in SBDs, which need to be identified to optimize detector performance. In this Letter, we identify the current flow mechanism in large area Schottky barrier diodes for radiation detection fabricated on 150 μm thick n-4H–SiC epitaxial layers. The analysis of temperature-dependent forward current–voltage (I–V–T) characteristics of SBDs revealed two linear regions in current–voltage curves up to 450 K, one corresponding to the current flow through a low barrier patch, while the other corresponds to that of average barrier distribution. Applying a SBH distribution model to the reverse I–V–T characteristics, an activation energy of 0.76 eV for the current flow over the Schottky barrier was calculated. Additionally, the activation energy did not directly correspond to any of the defect levels observed from the deep level transient spectroscopy (DLTS). Above 450 K, a Schottky type barrier lowering suggested a current flow through a low barrier patch of ≈ 0.8 eV. The absence of any SBH lowering below 450 K indicated that the current corresponded to a neutrally charged trap level at ≈ 0.6 eV below the conduction band edge, which was consistent with DLTS measurements revealing the presence of an electron trap level Z1/2 at 0.59 eV below the conduction band edge.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Unexpected origin of the quantum efficiency reduction in long-wavelength (In,Ga)⁢N light-emitting diodes

Differential carrier lifetime (DCL) measurements were performed on c-plane In 𝑥 ⁢Ga 1−𝑥⁢ N/Ga⁢N single-quantum-well (QW) light-emitting diodes (LEDs) with varying indium-content QWs (x = 13.5%, 16%, 22%), emitting with violet, blue, and green wavelengths. The recombination lifetimes of LEDs were found to increase with increasing indium composition, resulting in increased carrier densities n measured by DCL. Extraction of the A coefficients, which are assumed to not vary with n, and of the effective B(n) and C(n) coefficients of the ABC model of the internal quantum efficiency (IQE) of QWs showed no significant changes in the A coefficient with increasing indium content [In] in the In 𝑥 ⁢Ga 1−𝑥 ⁢N QW, and a reduction in the B(n) and C(n) coefficients with increasing [In]. When looking at the Shockley-Read-Hall (SRH) recombination rate An, the radiative recombination rate B(n)𝑛 2 , and the Auger-Meitner (AM) recombination rate C(n)𝑛 3 , we observed that at any given n, the SRH rate is the same for the three [In] measured, while the radiative rate decreases (by up to approximately 9 times) and the AM rate decreases (by up to approximately 7 times) with increasing indium content. This shows that the larger reduction in radiative recombination rates relative to nonradiative recombination rates with increasing [In] is the largest contributor to the decreased quantum efficiencies of LEDs (the “green gap”) at any given n. While some of the reduction in the effective recombination coefficients B(n) and C(n) can be explained by the reduced wave-function overlaps of the QW with increasing indium content, the larger reduction of B(n) relative to C(n) motivates further study of the intrinsic recombination coefficients 𝐵 0 and 𝐶 0 of bulk In 𝑥 ⁢Ga 1−𝑥 ⁢N alloys and how they are related to the effective recombination coefficients B(n) and C(n) in QWs. The relative contributions of nonradiative recombination are enhanced at any given current density due to the sublinear relationship between the carrier density n and the current density. Thus, the solution to the green gap, up to any intrinsic limitations set by the indium content of the QW, from an IQE perspective, requires the design of long-wavelength (In,Ga)⁢N LEDs with improved wave-function overlaps that can operate with a lower carrier density at any given current density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Electro-physical properties of surface-barrier diodes on low-resistance n-Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 crystals

The electro-physical properties of Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 n-type conductivity single crystals with relatively low resistivity were studied. The determined resistivity of semiconductor single crystals Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 n-type conductivity is equal to ρ≈2 Ω-cm at 293K. The activation energy of dark conductivity, measured from the temperature dependence of the resistivity of the In/Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 /In structure, is equal to ΔE≈0.11eV. From optical measurements of the absorption coefficient from the energy of photons in the region of large α, the band-gap width of the single crystal was found, which is equal to E g =1.53eV. Diode structures of Ni/Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 /In obtained by vacuum sputtering of Ni on the surface of a single crystal n-Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 were manufactured and studied. Here, the rectification coefficient at a voltage of U=1V is equal to 10 8 . Within the framework of the Sah-Noys-Shockley carrier generation-recombination model, a quantitative match of the experimental measurements of the volt-ampere characteristics with the calculation was achieved.

(Cd,Mn)(Te,Se)↗
DOE OSTI2023

Proton radiation effects on electronic defect states in MOCVD-grown (010) β -Ga 2 O 3

The impact of 1.8 MeV proton irradiation on metalorganic chemical vapor deposition grown (010) β-Ga 2 O 3 Schottky diodes is presented. It is found that after a 10.8 × 10 13 cm –2 proton fluence the Schottky barrier height of (1.40 ± 0.05 eV) and the ideality factor of (1.05 ± 0.05 ) are unaffected. Capacitance–voltage extracted net ionized doping curves indicate a carrier removal rate of 268 ± 10 cm –1 . The defect states responsible for the observed carrier removal are studied through a combination of deep level transient and optical spectroscopies (DLTS/DLOS) as well as lighted capacitance–voltage (LCV) measurements. The dominating effect on the defect spectrum is due to the E c -2.0 eV defect state observed in DLOS and LCV. This state accounts for ~75 % of the total trap introduction rate and is the primary source of carrier removal from proton irradiation. Of the DLTS detected states, the E c -0.72 eV state dominated but had a comparably smaller contribution to the trap introduction. These two traps have previously been correlated with acceptor-like gallium vacancy-related defects. Several other trap states at E C -0.36, E C -0.63, and E C -1.09 eV were newly detected after proton irradiation, and two pre-existing states at E C -1.2 and E C -4.4 eV showed a slight increase in concentration after irradiation, together accounting for the remainder of trap introduction. However, a pre-existing trap at E c -0.40 eV was found to be insensitive to proton irradiation and, therefore, is likely of extrinsic origin. Furthermore, the comprehensive defect characterization of 1.8 MeV proton irradiation damage can aid the modeling and design for a range of radiation tolerant devices.

42 ENGINEERING↗
DOE OSTI2025

Fiber-Coupled Multipass NIR Sensor for In Situ, Real-Time Water Vapor Outgassing Monitoring

This work presents the recent development of a fiber-coupled multipass near-infrared (NIR) gas sensor used to monitor water vapor desorption of small material coupons. The gas sensor design employs a White cell topology to maximize the optical path length over a compact, hand-size footprint. Water vapor concentrations are quantified over a large dynamic range by simultaneously applying wavelength modulation and tunable diode laser absorption spectroscopy techniques. A custom headspace optimized for material desorption experiments is assembled using commercially available vacuum chamber components. We provide in situ measurements of water vapor desorption from two geometries of the industrially important silicone elastomer Sylgard-184 as a case study for sensor viability. To corroborate the results, the gas sensor data are compared to numerical simulations based on a triple-mode diffusion–sorption model, consisting of Henry, Langmuir, and Pooling modes.

gas sensor↗
DOE OSTI2025

Probing the Fine Symmetry Breaking in High-Temperature Superconductor Bi 2 Sr 2 CaCu 2 O 8+δ with Angle-Resolved Nonreciprocal Transport

After decades of research, symmetry breaking in high-temperature cuprate superconductors remains a key issue to resolve and is relevant to understanding their exotic quantum phases. In the prototypical cuprate superconductor, Bi 2 Sr 2 CaCu 2 O 8+δ (Bi2212), the possible symmetry breaking has been mostly examined microscopically with scanning tunneling microscopy and photoemission spectroscopy. However, macroscopic evidence and the direct implications for electronic transport have remained elusive. Using superconductivity-enhanced nonreciprocal transport, we report macroscopic evidence of inversion symmetry breaking in Bi2212. While the inversion symmetry breaking is subtle, its effect on nonreciprocal transport is significantly enhanced by the vortex motion during the superconducting transition, leading to a robust manifestation of inversion symmetry breaking in macroscopic transport. Combining angle-resolved nonreciprocal transport and 3D tight-binding model calculations, we derive that the inversion symmetry breaking is due to subtle crystal distortions that give rise to both in-plane and out-of-plane polar axes. Our work not only establishes nonreciprocal transport as a sensitive macroscopic probe to provide electrical transport-based evidence of fine symmetry breaking in Bi2212, but also paves the way for novel device applications such as high-temperature superconducting diodes and superconducting spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

High electron mobility of Al x Ga1− x N evaluated by unfolding the DFT band structure

We calculate the alloy-disorder-limited electron mobility of AlxGa1−xN from first principles. AlxGa1−xN is a technologically important ultra-wide-bandgap alloy with promise in light emitting diodes and high-power transistors. Alloying introduces statistical disorder, which causes electrons to scatter between different crystal-momentum states, leading to a reduction in mobility for intermediate alloy compositions. The corresponding lifetime, which appears as an energy broadening in the band structure, can be evaluated by unfolding the band structure from the supercell basis to the primitive-cell basis. We fit the first-principles band broadening with a model scattering potential and evaluate the low-field electron mobility using the semiclassical Boltzmann transport equation in the relaxation-time approximation. Our calculated mobility is in agreement with experimental values. We also find the lowest alloy-scattering electron mobility (total electron mobility) across the entire composition range to be 186 cm2/V s (136 cm2/V s), which is comparable to the highest electron mobility predicted in the competitor system, β-(AlxGa1−x)2O3. Our results elucidate the intrinsic limits imposed by alloy disorder on electron transport in AlxGa1−xN.

Pant, Nick (ORCID:0000000254506045)↗
DOE OSTI2022

Flow Sensor Test Article (F-STAr) (Design and Fabrication Status Report)

The Flow Sensor Test Article (F-STAr) is a test article currently under construction for the Mechanisms Engineering Test Loop (METL). F-STAr was designed to provide high sodium flowrate capabilities for sensor calibration, component testing, and fluid studies. Figure 1 shows two solid model views of the new test article. F-STAr includes a high-capacity pump that can provide a nominal flowrate of 120 GPM; a test section support structure that can accommodate a wide array of sub-test articles and their instrumentation; and finally, a heating and cooling system to aid in controlling the testing environment. Initially, F-STAr will be configured to test liquid metal flow sensors, specifically field shift sensors like the Eddy Current Flow Sensors (ECFS) based on the RDT C4-7T standard. To test these sensors, two test sections were designed that attempt to model Sodium Fast Reactor (SFR) outlet conditions. Figure 2 shows models of the “Full-Scaled Test Section” (FSTS) that represents a generic SFR fuel handling socket and a “Pseudo-Scaled Test Section” (PSTS) that represents a generic array of scaled fuel handling sockets. While F-STAr will be configured to test ECFS’s, it can also be outfitted to meet other experimental needs. For example, F-STAr could be setup with a test section that includes a fluidic diode or a component test investigating the performance of hydrodynamic bearings. Other test sections include studies of sodium thermal hydraulics like thermal striping. Overall, F-STAr is a flexible test article designed to accommodate many needs. This report will provide a status update on the design and construction of F-STAr. Manufacturing of all components has commenced, and several components have already been completed. These components include the pump and test section assembly stand. Other components, such as the heater, have been completed but were rejected due to the vendor not meeting the requirements of the purchase order. Lastly, the submersible flowmeter and main flange components are under construction, and their status will be reviewed in this report. Overall, most of the F-STAr components and parts will be completed by the end of September 2022.

42 ENGINEERING↗
DOE OSTI2022

PVwindow (Photovoltaic Window Simulator) [SWR-22-01]

PVwindow simulates photovoltaic window properties by allowing the user build stacks of thin film materials that compose the window layers. The only needed inputs are the complex refractive indices and thicknesses of the materials. The software will simulate the optical transmission, front reflection, and back reflection of the stack using the transfer matrix method. Properties specific to PV window optics such as visible transmittance and color are also calculated. The optics code extracts the number of absorbed photons in the PV absorber layer and solves the single diode equation to yield theoretical photovoltaic metrics such as power conversion efficiency, fill factor, open circuit voltage, and short circuit current of the PV window when illuminated at an arbitrary angle or from either side of the stack. The software tool ultimately allows researchers to design photovoltaic windows and simulate their properties. The software also exports files that can be read into LBL Window software or into the EnergyPlus and Open Studio building energy modeling software to determine larger scale energy impacts of PV window integration.

Wheeler, Lance↗
DOE OSTI2020

A genetic algorithm approach for reconstructing spectral content from filtered x-ray diode array spectrometers

Filtered diode array spectrometers are routinely employed to infer the temporal evolution of spectral power from x-ray sources, but uniquely extracting spectral content from a finite set of broad, spectrally overlapping channel spectral sensitivities is decidedly nontrivial in these under-determined systems. Here, we present the use of genetic algorithms to reconstruct a probabilistic spectral intensity distribution and compare to the traditional approach most commonly found in the literature. Unlike many of the previously published models, spectral reconstructions from this approach are neither limited by basis functional forms nor do they require a priori spectral knowledge. While the original intent of such measurements was to diagnose the temporal evolution of spectral power from quasi-blackbody radiation sources—where the exact details of spectral content were not thought to be crucial—we demonstrate that this new technique can greatly enhance the utility of the diagnostic by providing more physical spectra and improved robustness to hardware configuration for even strongly non-Planckian distributions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Evaluation of Fe-βGa 2 O 3 for Photoconductive Semiconductor Switching

We present iron-doped beta gallium oxide (Fe- β Ga2O3) as a candidate for photoconductive semiconductor switches (PCSSs) with sub-bandgap light. From a commercially available Fe- β Ga2O3 wafer, we first did material characterization. This included measurements of absorption coefficient and dopant composition, carrier activation energy up to 200 °C, break down field of planar electrodes (limited from material passivation), and free carrier recombination lifetime, and thermal effects up to 203 °C on photocurrent with a 447 nm light emitting diode (LED) source. Here, we then demonstrated pulsed operation of a Fe- β Ga2O3 PCSS under different sub-bandgap wavelengths (355, 532, and 1064 nm) and sub-ns pulses. Fe- β Ga2O3 is a candidate for high temperature PCSS with 355 nm responsivity of 7×10 -7 A-cm/W-kV at room temperature and up to 5.5×10 -4 A-cm/W-kV at 200 °C. From these investigations, we discuss a simple trap model to describe the illumination process of the PCSS. Fe- β Ga2O3 has a high breakdown field and has moderate responsivity characteristics, but the dark current at high temperature leads to low photo-to-dark current ratio (PDCR). Regardless, we verify its potential as a PCSS material for harsh environment applications.

42 ENGINEERING↗
DOE OSTI2022

LLNL Macroscopic Anisotropic Explosives Research At INL National Security Test Range: Shot Narrative

This series of experiments is exploring new frontiers in explosives science, technology, and engineering. The extensive list of experiment shots is necessary to sort out what works and what does not work in searching for an environment that supports anisotropic detonation properties in explosives. These experiments have been designed to serve as an economical and efficient first-cut determination as to whether there is any validity to an explosive analog to a series circuit of electrical diodes. That is, the detonation moves more easily in the “forward” direction than the “backward” direction. The basic data gleaned from these experiments will be used to design experiments that will be shot in the 10 kg tank at the High Explosives Application Facility (HEAF) at the Lawrence Livermore National Laboratory. In turn, those shots that will be heavy in diagostics and instrumentation, providing basic data that will be used by simulation code developers in creating high explosive models that account for air gap and oblique explosive surfaces undergoing sympathetic detonation.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Wide-range continuous tuning of the thermal conductivity of La0.5Sr0.5CoO3-δ films via room-temperature ion-gel gating

Abstract Solid-state control of the thermal conductivity of materials is of exceptional interest for novel devices such as thermal diodes and switches. Here, we demonstrate the ability to continuously tune the thermal conductivity of nanoscale films of La 0.5 Sr 0.5 CoO 3- δ (LSCO) by a factor of over 5, via a room-temperature electrolyte-gate-induced non-volatile topotactic phase transformation from perovskite (with δ ≈ 0.1) to an oxygen-vacancy-ordered brownmillerite phase (with δ = 0.5), accompanied by a metal-insulator transition. Combining time-domain thermoreflectance and electronic transport measurements, model analyses based on molecular dynamics and Boltzmann transport equation, and structural characterization by X-ray diffraction, we uncover and deconvolve the effects of these transitions on heat carriers, including electrons and lattice vibrations. The wide-range continuous tunability of LSCO thermal conductivity enabled by low-voltage (below 4 V) room-temperature electrolyte gating opens the door to non-volatile dynamic control of thermal transport in perovskite-based functional materials, for thermal regulation and management in device applications.

42 ENGINEERING↗