Search NASA⌕ Search

SEARCH · Search NASA

Results for “dodecane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Hydrolysis and Radiation Chemistry of the DGAs

This document was prepared to meet FCR&D level 3 milestone M3FT-16IN030104052, “continue the study of the short chain compounds,” and, “ study the radiolysis of the non-symmetrical DGA (D3DODGA)….,” under the Radiation Chemistry FCR&D work package. Toward these goals, the short chain DGA, tetraethyldiglycolamide (TEDGA) was investigated for its hydrolytic stability in HNO3 solution, with comparisons to the less oxidizing mineral acid HCl. Initial gamma-irradiations were also performed on DGA solutions, to inform a more detailed investigation of several short chain compounds anticipated for FY17. The hydrolytic and radiolysis behavior of TEDGA is of interest for two reasons. First, previous long chain DGA radiolysis was conducted in dodecane solution since the long chain compounds are soluble in that diluent, and new radiation chemistry is expected in the aqueous environment due to reactions with •OH radical. The second reason is that this water-soluble DGA has been proposed for use as a stripping or holdback agent in both European and American fuel cycle scenarios. Therefore, this work was performed in collaboration Forschungszentrum Jülich (FZJ), and the European SACSESS program. Additionally, results are presented here regarding the radiation of chemistry the non-symmetrical DGA didodecyldioctyldiglycolamide (D3DODGA), for comparison to previous work with symmetrical DGAs such as TODGA and TEHDGA. This was also conducted in collaboration with researchers in the SACSESS program.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Sigma Team for Minor Actinide Separation: PNNL FY 2010 Status Report

Work conducted at Pacific Northwest National Laboratory (PNNL) in FY 2010 addressed two lines of inquiry. The two hypotheses put forth were: 1. The extractants from the TRUEX( ) process (CMPO)( ) and from the TALSPEAK( ) process (HDEHP)( ) can be combined into a single process solvent to separate 1) the lanthanides and actinides from acidic high-level waste and 2) the actinides from the lanthanides in a single solvent extraction process. (Note: This combined process will hereafter be referred to as the TRUSPEAK process.) A series of empirical measurements performed (both at PNNL and Argonne National Laboratory) in FY 2009 supported this hypothesis, but also indicated some nuances to the chemistry. Lanthanide/americium separation factors of 12 and higher were obtained with a prototypic TRUSPEAK solvent when extracting the lanthanides from a citrate-buffered DTPA( ) solution. Although the observed separation factors are sufficiently high to design an actinide/lanthanide separation process, a better understanding of the chemistry is expected to lead to improved solvent formulations and improved process performance. Work in FY 2010 focused on understanding the synergistic extraction behavior observed for Nd(III) and Am(III) when extracted into mixtures of CMPO and HDEHP. The interaction between CMPO and HDEHP in dodecane was investigated by 31P NMR spectroscopy, and an adduct of the type CMPO•HDEHP was found to form. The formation of this adduct will reduce the effective extractant concentrations and must be taken into account when modeling metal ion extraction data in this system. Studies were also initiated to determine the Pitzer parameters for Nd(III) in lactate media. 2. Higher oxidation states (e.g., +5 and +6) of Am can be stabilized in solution by complexation with uranophilic ligands, and this chemistry can be exploited to separate Am from Cm. To test this hypothesis, the previously reported stereognostic uranophilic ligands NPB( ) and ETAC(e) were investigated. To assess the potential of these ligands to stabilize pentavalent and hexavalent actinides, stability constants were measured for complexation of these ligands to Nd(III), Np(V), and Pu(VI) in a solvent mixture consisting of 80% methanol/20% water. For comparison, an analogous non-stereognostic ligand, NTA,(f) was also examined. The ligand ETAC showed greater binding affinity for hexavalent Pu versus trivalent Nd by two orders-of-magnitude. Such selectivity was not observed for either NTA or NPB.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Separation of Transmutation - and Fission-Produced Radioisotopes from Irradiated Beryllium

The primary objective of this study was to test the effectiveness of a two-step solvent extraction-precipitation process for separating transmutation and fission products from irradiated beryllium. Beryllium metal was dissolved in nitric and fluoroboric acids. Isotopes of 241Am, 239Pu, 85Sr, 60Co, and 137Cs were then added to make a surrogate beryllium waste solution. A series of batch contacts was performed with the spiked simulant using chlorinated cobalt dicarbollide and polyethylene glycol diluted with sulfone to extract the isotopes of Cs and Sr. Another series of batch contacts was performed using a combination of octyl (phenyl)-N,Ndiisobutylcarbamoylmethylphosphine oxide in tributyl phosphate diluted with dodecane for extracting the isotopes of Pu and Am. The 60Co was separated by first forming a cobalt complex and then selectively precipitating the beryllium as a hydroxide. The results indicate that greater than 99.9% removal can be achieved for each radionuclide. Transuranic isotope contamination levels are reduced to less than 100 nCi/g, and sources of high beta-gamma radiation (60Co, 137Cs, and 90Sr) are reduced to levels that will allow the beryllium to be contact handled. The separation process may be applicable to a recycle or waste disposition scenario.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Deployment of Cesium Recovered from High Level Liquid Waste for Irradiation - Indian Scenario - 13128

Recovery of Cs-137 from HLW and its utilisation as source pencil in place of Co-60 is vital for medical and sewage treatment applications in India. For separation of Cs, specific ion exchange resins as well as 'Calyx crown' solvent have been developed and synthesized indigenously. A flow sheet involving separation of Cs from acidic HLW using Ammonium Molybdo Phosphate (AMP) resins, recovery of Cs from the loaded AMP column by dissolving it in alkali, ion exchange purification of Cs rich alkaline solution using Resorcinol-Formaldehyde Poly condensate (RF) resins and its elution in cesium nitrate form was developed and demonstrated. Solvent extraction route employing 0.03 Molar, 1-3-octyl oxy Calyx (4) arene crown-6 in 30% isodecyl alcohol and dodecane was also established using mixer settlers. Cesium lithium borosilicate glass based formulations have been considered as a glass matrix for Cs irradiation pencils. While choosing this vitreous matrix, attributes addressing maximum possible Cs-137 loading, low glass pouring temperature to minimise Cs volatility, reasonably good mechanical strength and good chemical durability have been considered. Recovered cesium nitrate solution was vitrified along with glass additives in an induction heated metallic melter and subsequently poured into 12 numbers of Cs irradiation pencils positioned on turn-table equipped with the load cell. The complete cycle involving recovery of Cs from HLW followed by its conversion into Cs pencil was demonstrated. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Study on the kinetics and mechanism of Am(III) with TODGA

The removal of minor actinides (mainly Am, Cm and Np) from the high-level waste would remarkably reduce the necessary storage time. Recently developed, a tridentate ligand, N,N,N',N'-tetraoctyl diglycolamide (TODGA), has been identified as one of the most powerful extractants being considered for the partitioning of trivalent actinides and lanthanides. In the present paper, the extraction kinetics behavior of Am(III) in TODGA/n-dodecane-HNO{sub 3} system has been studied, dependent on various parameters such as the stirring speed, the interfacial area, the extractant concentration in n-dodecane, the extracted ions concentration, the acidity of aqueous phase and the temperature. The results show that: the extraction process is controlled by diffusion mode under 130 rpm of stirring speed and by chemical reaction mode above 150 rpm. The extraction rate equation is given in the paper and the apparent extraction rate constant of Am(III) by TODGA/n-dodecane in 170 rpm and at 25 Celsius degrees is k=(24.2±3.4)*10{sup -3} mol{sup -2.18}*L{sup 2.18}*min{sup -1}*cm. The initial extraction rate of Am(III) by TODGA/n-dodecane at 170 r/min and 25 Celsius degrees increases with increasing temperature, and the apparent active energy is calculated to be E{sub a}=(25.94±0.98) kJ/mol.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multiphase Large Eddy Simulation of a Pulsed Sieve-Plate Extraction Column - 18125

Presented here is research resulting from a framework of single-phase and multiphase modelling trials. These are intended to accurately simulate the internal flow phenomena arising in pulsed sieve-plate extraction columns representative of those found in industry. Three-dimensional unsteady flow calculations using large eddy simulation coupled with dynamic sub-grid scale modelling have been used to capture the transient effects of sinusoidal flow conditions using the open source CFD code OpenFOAM{sup R}. Multiphase interface interactions are modelled using the volume of fluid method with appropriate heavy and light phase fluidic properties capturing surface tension, density and viscous effects. The system studied consists of a 150 mm diameter column with two perforated plates with a fractional free area of 25 %, operational under 1 Hz pulsing frequency at a 50 mm amplitude and plate spacing of 300 mm. The materials simulated include water (single-phase) and 3 M nitric acid and dodecane / tributyl phosphate mixture at 30 vol% (multiphase). Results are compared with appropriate correlations from literature. The dispersive mixing efficiency of the system was also evaluated via a mixing index value which allows quantification of the ratio of rotational and irrotational flow components. This study has found that the predictive methods employed are effective at capturing the different scales of turbulence present within pulsed sieve-plate extraction columns, and its influence on their operation. As such, the work highlights the ability of large eddy simulation-based modelling to predict the complex flows in such column geometries. Furthermore, the techniques employed provide valuable insight into the hydrodynamic flow characteristics and mixing mechanisms arising within pulsed sieve-plate extraction columns. (authors)

42 ENGINEERING↗

Reduction of Pertechnetate By Acetohydroxamic Acid: Formation of [tc**II(NO)(AHA)(2)(H(2)O)]**+ And Implications for the UREX Process

Reductive nitrosylation and complexation of ammonium pertechnetate by acetohydroxamic acid has been achieved in aqueous nitric and perchloric acid solutions. The kinetics of the reaction depend on the relative concentrations of the reaction components and are accelerated at higher temperatures. The reaction does not occur unless conditions are acidic. Analysis of the X-ray absorption fine structure spectroscopic data is consistent with a pseudo-octahedral geometry and the linear Tc-N-O bond typical of technetium nitrosyl compounds, and electron spin resonance spectroscopy is consistent with a d{sup 5} Tc(II) nitrosyl complex. The nitrosyl source is generally AHA, but it may be augmented by some products of the reaction with nitric acid. The resulting low-valency trans-aquonitrosyl(diacetohydroxamic)-technetium(II) complex ([Tc{sup II}(NO)(AHA){sub 2}H{sub 2}O]{sup +}, 1) is highly soluble in water, extremely hydrophilic, and is not extracted by tri-n-butylphosphate in a dodecane diluent. Its extraction properties are not pH-dependent: potentiometric-spectrophotometric titration studies indicate a single species from pH 4 down to -0.6 (calculated). This molecule is resistant to oxidation by H{sub 2}O{sub 2}, even at high pH, and can undergo substitution to form other technetium nitrosyl complexes. The potential formation of 1 during reprocessing may strongly impact the fate of technetium in the nuclear fuel cycle.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Drop mass transfer in a microfluidic chip compared to a centrifugal contactor

A model system was developed for enabling a multiscale understanding of centrifugal-contactor liquid–liquid extraction.The system consisted of Nd(III) + xylenol orange in the aqueous phase buffered to pH =5.5 by KHP, and dodecane + thenoyltrifluroroacetone (HTTA) + tributyphosphate (TBP) in the organic phase. Diffusion constants were measured for neodymium in both the organic and aqueous phases, and the Nd(III) partition coefficients were measured at various HTTA and TBP concentrations. A microfluidic channel was used as a high-shear model environment to observe mass-transfer on a droplet scale with xylenol orange as the aqueous-phase metal indicator; mass-transfer rates were measured quantitatively in both diffusion and reaction limited regimes on the droplet scale. Lastly, the microfluidic results were comparable to observations made for the same system in a laboratory scale liquid–liquid centrifugal contactor, indicating that single drop microfluidic experiments can provide information on mass transfer in complicated flows and geometries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of countercurrent membrane vapor extraction of a dilute aqueous biosolute

Removal of dilute bioproducts from fermenter broths is a major challenge both to avoid microbe inhibition and to recover solutes economically without water loss. We analyze a proposed new process, membrane vapor extraction (MVE), where semi-volatile dilute aqueous solutes vaporize at the upstream side of an omniphobic, microporous membrane and dissolve into a nonpolar solvent highly favorable to the solutes but not to water. A new membrane-process analysis is outlined and applied to the countercurrent recovery of 2 wt % aqueous butanol by a prototype solvent (dodecane) at 40°C. Thermodynamic phase equilibria, pioneered by the Prausnitz school, are crucial to MVE process design. Over 90% of the feed butanol is recovered with essentially no water loss giving a separation factor of over 1000. Energy requirements in MVE are low. In this study, our design calculations demonstrate that MVE is a viable separation process to remove and recover dilute aqueous biosolutes.

mass-transfer resistance↗

Surface Protected Organozirconium Catalyzes C─H Alumination of Saturated Hydrocarbons

Surface grafted organozirconium catalyzes C─H/Et─Al exchange reactions, involving saturated hydrocarbons and AlEt 3 , to afford organoaluminum compounds and ethane. The Zr(O t Bu) 3 @SiO 2 -Al 2 O 3 –700 (1) catalyst contains monopodal ≡SiO─Zr(O t Bu) 3 and only a few residual silanols (<5%). Nonetheless, these silanols are the Achille's heel of 1, providing a pathway for surface and catalyst degradation during catalysis, limiting the alkylaluminum yield and catalyst turnover. Support degradation, involving the cleavage of Si─O bonds by activated surface organometallics, is inhibited by capping silanols with ─SiMe 3 . Residual silanols in 1 react with allyltrimethylsilane, as determined by solid-state 13 C and 29 Si nuclear magnetic resonance (NMR) spectroscopy, infrared (IR) spectroscopy, and reaction stoichiometry, to form Zr(O t Bu) 3 /SiMe 3 @SiO 2 -Al 2 O 3–700 (2), which is resistant to degradation by AlEt 3 . C─H alumination of dodecane catalyzed by 2 produces higher yields of the 1-dodecylaluminum product in comparison to 1, and in >95% selectivity. Additionally, methane undergoes 2-catalyzed C─H alumination, providing a route to AlMe 3 .

Banerjee, Sayak [Iowa State Univ., Ames, IA (Unite↗

Alpha and gamma radioysis of nuclear solvent etxraction ligands used for An(III) and Ln(III) Separations

The separation of the minor actinides from dissolved nuclear fuel remains a major challenge in developing large-scale waste separations processes. One important criterion is that all these processes must be robust under high acidity and radiation dose conditions. Here we have investigated the TRUEX ligand CMPO in dodecane, comparing the effects of gamma (60Co) with alpha irradiation using isotopic alpha sources (244Cm, 211At) experiments. The radiolytically-based CMPO decomposition efficiencies are approximately the same for both types of radiolysis, with the overall decomposition being significantly less when this formulation is irradiated in contact with aqueous acid.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The redox chemistry of neptunium in γ-irradiated aqueous nitric acid in the presence of an organic phase

The radiolytic changes in oxidation state for solutions of initially Np(V) and/or Np(VI) were investigated by gamma-irradiation in conjunction with UV/Vis spectroscopy of the aqueous phase. Samples were irradiated in varying concentrations of nitric acid, and with or without the presence of 30% TBP in dodecane. At short irradiation times Np(V) was oxidized to Np(VI), even in the presence of the organic phase. Upon the radiolytic production of sufficient amounts of nitrous acid, reduction of Np(VI) to Np(V) occurred in both phases. This was accompanied by stripping of the previously extracted Np(VI). Nitric acid concentrations of 6 M mitigated this reduction.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Neptunium redox speciation and determination of its total concentration in dissolved fuel simulant solutions by spectrophotometry

Here, two new approaches to measure Np concentration in dissolved used nuclear fuel simulant (aqueous feed for PUREX process) by spectrophotometry are developed. The first approach is based on chemical reduction of Np in the feed to its tetravalent state using ascorbic acid with simultaneous conversion of Pu(IV) to Pu(III). Interfering effects from light absorbing fission and corrosion products are accounted for by measuring optical absorbance spectrum of aqueous raffinate after extraction of U, Np, and Pu by tributyl phosphate in dodecane. The second approach uses no chemical treatment at all and relies on spontaneous valency adjustment of Np to Np(V) by dilution of the feed with water to reduce its acidity to low decimolar range of nitric acid concentration. Results of Np determination in the feed by spectrophotometry are in good agreement with its concentration measured by ICP-MS.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

An iterative dynamic chemical stiffness removal method for reacting flow simulations

Abstract An iterative dynamic chemical stiffness removal method (IDCSR) based on quasi-steady-state approximation (QSSA) is proposed. The IDCSR method is built on a previously developed non-iterative method which has proved to work well for small timestep sizes. A novel iterative procedure is designed in IDCSR to enable explicit time integration of stiff chemistry at relatively large timestep sizes relevant to practical reacting flow simulations. The effectiveness of the iterative procedure is first demonstrated with a toy problem and homogeneous auto-ignition with fixed integration step sizes, showing that larger timestep sizes can be allowed for explicit time integration using IDCSR compared with the previous non-iterative method. IDCSR is then compared with existing explicit chemistry solvers for simulations of homogeneous auto-ignition and shows similar or lower computational cost but significantly higher accuracy across a wide range of timestep sizes. IDCSR is further combined with an automatic adaptive time-stepping scheme for simulations of 0-D homogeneous auto-ignition and a 2-D laminar lifted n -dodecane jet flame. For the 0-D auto-ignition simulations, IDCSR is shown to reduce both the error (by 43%–90%) and computational cost (by 6–15 times) compared with existing explicit solvers, while achieving speed-up factors of up to 400 compared with VODE for a wide range of timestep sizes and reaction mechanisms. For the 2-D jet flame simulations, speed-up factors of 15 and 31 for chemistry integration, and 5 and 9 for overall simulation, are achieved by IDCSR compared with CVODE with and without analytic Jacobian, respectively.

Xu, Chao (ORCID:0000000153074159)↗

Hydrogenation of o -cresol on platinum catalyst: Catalytic experiments and first-principles calculations

We report catalytic experiments were performed for the hydrogenation of o-cresol in n-dodecane over a platinum catalyst. Batch reactions analyzed with an in-situ ATR IR probe suggest that the hydrogenation results in the formation of the final product, 2-methyl-cyclohexanol, with 2-methyl-cyclohexanone as the intermediate product. Ab initio density-functional theory was employed to investigate the atomic-scale mechanism of o-cresol hydrogenation on the Pt(111) surface. The formation of 2-methyl-cyclohexanone was found to involve two steps. The first step is a hydrogen abstraction, that is, the H atom in the hydroxyl group migrates to the Pt surface. The second step is hydrogenation, that is, the pre-existing H atoms on Pt react with the carbon atoms in the aromatic ring. On the other hand, 2-methyl-cyclohexanonol may be produced through two paths, with activation energies slightly greater than that for the formation of 2-methyl-cyclohexanone. One path involves direct hydrogenation of the aromatic ring. Another path involves three steps, with the partial hydrogenation of the ring as the first step, hydrogen abstraction of the single —OH group as the second, and hydrogenation of remaining C atoms and the O atom the last.

36 MATERIALS SCIENCE↗

Protein extraction into the bicontinuous microemulsion phase of a Water/SDS/pentanol/dodecane winsor-III system: Effect on nanostructure and protein conformation

Bicontinuous microemulsions (BμEs), consisting of water and oil nanodomains separated by surfactant monolayers of near-zero curvature, are potentially valuable systems for purification and delivery of biomolecules, for hosting multiphasic biochemical reactions, and as templating media for preparing nanomaterials. We formed Winsor-III systems by mixing aqueous protein and sodium dodecyl sulfate (SDS) solutions with dodecane and 1-pentanol (cosurfactant) to efficiently extract proteins into the middle (BμE) phase. Bovine serum albumin (BSA) and cytochrome c partitioned to the BμE phase at 64% and 81% efficiency, respectively, producing highly concentrated protein solutions (32 and 44 g L –1 , respectively), through release of water and oil from the BμEs. Circular dichroism spectroscopic analysis demonstrated that BSA underwent minor secondary structural changes upon incorporation into BμEs, while the secondary structure of cytochrome c and pepsin underwent major changes. Small-angle x-ray scattering (SAXS) results show that proteins promoted an increase of the interfacial fluidity and surface area per volume for the BμE surfactant monolayers, and that each protein uniquely altered self-assembly in the Winsor-III systems. Cytochrome c partitioned via electrostatic attractions between SDS and the protein’s positively-charged groups, residing near the surfactant head groups of BμE monolayers, where it decreased surfactant packing efficiency. BSA partitioned through formation of SDS-BSA complexes via hydrophobic and electrostatic attractive interactions. As the BSA-SDS ratio increased, complexes’ partitioning favored BμEs over the oil excess phase due to the increased hydrophilicity of the complexes. In conclusion, this study demonstrates the potential utility of BμEs to purify proteins and prepare nanostructured fluids possessing high protein concentration.

59 BASIC BIOLOGICAL SCIENCES↗

OH time-histories during oxidation of n-heptane and methylcyclohexane at high pressures and temperatures

OH concentration time-histories during n-heptane and methylcyclohexane (MCH) oxidation were measured behind reflected shock waves in a heated, high-pressure shock tube. Experimental conditions covered temperatures of 1121 to 1332 K, pressures near 15 atm, and initial fuel concentrations of 750 and 1000 ppm (by volume), and an equivalence ratio of 0.5 with O{sub 2} as the oxidizer and argon as the bath gas. OH concentrations were measured using narrow-linewidth ring-dye laser absorption near the R-branchhead of the OH A-X(0,0) system at 306.47 nm. These current measurements together with our recent results for n-dodecane oxidation [S.S. Vasu, D.F. Davidson, Z. Hong, V. Vasudevan, R.K. Hanson, Proc. Combust. Inst. 32 (2009), doi:10.1016/j.proci.2008.05.006] provide critically needed validation targets for jet fuel surrogate kinetic mechanisms and further improve understanding of high-pressure, high-temperature oxidation chemistry. Detailed comparisons of these OH time-histories with the predictions of various kinetic mechanisms were made. Sensitivity and pathway analyses for these reference fuel components were performed, leading to reaction rate recommendations with improved model performance. Current results are the first quantitative measurements of OH time-histories during high-pressure oxidation of these fuels, and hence are a critical step toward development of accurate reaction models for jet fuel surrogates. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗