SEARCH · Search NASA

Results for “dynamic baselines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Dynamic performance of several large antenna concepts

Four antenna concepts the box truss, tetrahedral truss, wrap-radial rib, and hoop and column antenna were examined for the dynamic performance when subjected to an operational environment. Space applications for the concepts are numerous; however, the land mobile satellite system (LMSS) was chosen as a baseline study and its operational constraints are applied to each concept. The dynamic response of each concept is examined for structural displacement and structural damping effects. The necessity of a control system for vibrational displacement reduction is examined along with a comparison of the relative merits of each antenna concept.

Andersen, G. C.↗

DOE OSTI2020

Auxin‐induced actin cytoskeleton rearrangements require AUX1

Summary The actin cytoskeleton is required for cell expansion and implicated in cellular responses to the phytohormone auxin. However, the mechanisms that coordinate auxin signaling, cytoskeletal remodeling and cell expansion are poorly understood. Previous studies examined long‐term actin cytoskeleton responses to auxin, but plants respond to auxin within minutes. Before this work, an extracellular auxin receptor – rather than the auxin transporter AUXIN RESISTANT 1 (AUX1) – was considered to precede auxin‐induced cytoskeleton reorganization. In order to correlate actin array organization and dynamics with degree of cell expansion, quantitative imaging tools established baseline actin organization and illuminated individual filament behaviors in root epidermal cells under control conditions and after indole‐3‐acetic acid (IAA) application. We evaluated aux1 mutant actin organization responses to IAA and the membrane‐permeable auxin 1‐naphthylacetic acid (NAA). Cell length predicted actin organization and dynamics in control roots; short‐term IAA treatments stimulated denser and more parallel, longitudinal arrays by inducing filament unbundling within minutes. Although AUX1 is necessary for full actin rearrangements in response to auxin, cytoplasmic auxin (i.e. NAA) stimulated a lesser response. Actin filaments became more ‘organized’ after IAA stopped elongation, refuting the hypothesis that ‘more organized’ actin arrays universally correlate with rapid growth. Short‐term actin cytoskeleton response to auxin requires AUX1 and/or cytoplasmic auxin.

AUX1↗

DOE OSTI2026

Quantum kinetic modeling of KEEN waves in a warm-dense regime

We report the first fully kinetic, quantum study of kinetic electrostatic electron nonlinear (KEEN) waves, showing that quantum diffraction systematically erodes the classical trapping mechanism, narrows harmonic locking to the fundamental, and hastens post-drive decay. Electrons are evolved with a second-order Strang-split 1D1V Wigner–Poisson solver that couples conservative semi-Lagrangian WENO advection to an analytic Fourier space update for the non-local Wigner term, while ions remain classical. We focus on collisionless dynamics in a weakly coupled regime, providing a controlled baseline before collisional extensions. Short, frequency-tuned ponderomotive pulses drive KEEN formation in a uniform Maxwellian plasma; as the dimensionless quantum parameter H rises from the classical limit to values relevant to warm-dense matter, doped semiconductors, and 2D electron systems, the drive threshold increases, higher harmonics are damped, trapped electron vortices diffuse, and the subplasma electrostatic energy relaxes to a lower stationary level, as confirmed by continuous wavelet analysis. These microscopic changes carry macroscopic weight. Ignition-scale capsules now compress matter to regimes where the electron de Broglie wavelength rivals the Debye length, making classical kinetic descriptions insufficient. By extending KEEN physics into this quantum domain, our results offer a potential diagnostic of non-equilibrium electron dynamics for next-generation inertial-confinement designs and high-energy-density platforms, indicating that predictive fusion modeling may benefit from the integration of kinetic fidelity with quantum effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1996

Aeroservoelastic Modeling and Validation of a Thrust-Vectoring F/A-18 Aircraft

An F/A-18 aircraft was modified to perform flight research at high angles of attack (AOA) using thrust vectoring and advanced control law concepts for agility and performance enhancement and to provide a testbed for the computational fluid dynamics community. Aeroservoelastic (ASE) characteristics had changed considerably from the baseline F/A-18 aircraft because of structural and flight control system amendments, so analyses and flight tests were performed to verify structural stability at high AOA. Detailed actuator models that consider the physical, electrical, and mechanical elements of actuation and its installation on the airframe were employed in the analysis to accurately model the coupled dynamics of the airframe, actuators, and control surfaces. This report describes the ASE modeling procedure, ground test validation, flight test clearance, and test data analysis for the reconfigured F/A-18 aircraft. Multivariable ASE stability margins are calculated from flight data and compared to analytical margins. Because this thrust-vectoring configuration uses exhaust vanes to vector the thrust, the modeling issues are nearly identical for modem multi-axis nozzle configurations. This report correlates analysis results with flight test data and makes observations concerning the application of the linear predictions to thrust-vectoring and high-AOA flight.

Brenner, Martin J.↗

NASA NTRS1975

Control and stability problems of remote orbital capture

The dynamics and control aspects of orbital capture of space objects were studied. Differential angular rates and orientation between the object and the grappler were used to investigate the effects of misalignment as well as stability and control. The control responses after capture are discussed. The feasibility of nulling combined spin and nutation of a typical satellite is demonstrated by a Lagrangian formulation to establish a baseline situation. A free-flying teleoperator (FFTO) with a dynamically unbalanced grappler is shown to be desirable because extremely adverse cyclic torques may be generated. A combined teleoperator-satellite system assuming misalignments during capture was dynamically analyzed. Related responses and stability evaluations are included.

Kaplan, M. H.↗

DOE OSTI2020

Assessing the Additional Carbon Savings with Biofuel

A recent study claims that corn used for ethanol should not be considered to be inherently biogenically carbon-neutral because not all that corn was grown additional to the level otherwise. By assessing the extent of carbon neutrality of corn for ethanol using the reference point baseline approach and historical data that study concluded that the carbon intensity of US corn ethanol is 27% higher than that of gasoline. We develop a framework to determine the carbon neutrality of corn for ethanol by assessing the additional carbon uptake by crops using an anticipated baseline approach. We also apply this framework to determine the additional corn produced for ethanol and include the direct life cycle carbon emissions of only that portion of corn in the direct life cycle carbon intensity of corn ethanol. We implement this framework by integrating an economic model of the agricultural sector in the USA with a biogenic carbon model and life cycle analysis to quantify biogenic carbon uptake and direct life cycle emissions with and without corn ethanol expansion over the 2007–2027 period. We find that the combined biogenic carbon emissions and direct life cycle carbon emission intensity of corn ethanol (not including indirect land use related emissions) is 21% lower than gasoline. In conclusion, the lower value of this carbon intensity of corn ethanol compared with gasoline is robust to a wide range of parametric assumptions.

09 BIOMASS FUELS↗

NASA NTRS1992

Structural characterization of an articulated-truss joint

A first generation space crane articulated-truss joint was statically and dynamically characterized in a configuration which approximated an operational environment. The articulated-truss joint was integrated into a test bed for structural characterization. Static characterization was performed by applying known loads and measuring the corresponding deflections to obtain load-deflection curves. Dynamic characterization was performed using modal testing to experimentally determine the first six mode shapes, frequencies, and modal damping values. The static and dynamic characteristics were also determined for a reference truss, which served as a characterization baseline. Load-deflection curves are presented for the reference truss, and the articulated-truss joint mounted in the test bed. The static and dynamic experimental results are compared to analytical predictions obtained from finite element analyses. The load-deflection response is also presented for one of the linear actuators used in the articulated-truss joint. Finally, an assessment is presented for the predictability of the truss hardware used in the reference truss and articulated-truss joint based upon hardware stiffness properties which were previously obtained during the Precision Segmented Reflector (PSR) Technology Development Program.

Sutter, Thomas R.↗

DOE OSTI2024

QC-GN 2 oMS 2 : a Graph Neural Net for High Resolution Mass Spectra Prediction

Predicting the mass spectrum of a molecular ion is often accomplished via three generalized approaches: rules-based methods for bond breaking, deep learning, or quantum chemical (QC) modeling. Rules-based approaches are often limited by the conditions for different chemical subspaces and perform poorly under chemical regimes with few defined rules. QC modeling is theoretically robust but requires significant amounts of computational time to produce a spectrum for a given target. Among deep learning techniques, graph neural networks (GNNs) have performed better than previous work with fingerprint-based neural networks in mass spectra prediction. To explore this technique further, we investigate the effects of including quantum chemically derived information as edge features in the GNN to increase predictive accuracy. The models we investigated include categorical bond order, bond force constants derived from extended tight-binding (xTB) quantum chemistry, and acyclic bond dissociation energies. Throughout this work, we evaluated these models against a control GNN with no edge features in the input graphs. Bond dissociation enthalpies yielded the best improvement with a cosine similarity score of 0.462 relative to the baseline model (0.437). In this work we also apply dynamic graph attention which improves performance on benchmark problems and supports the inclusion of edge features. Between implementations, we investigate the nature of the molecular embedding for spectra prediction and discuss the recognition of fragment topographies in distinct chemistries for further development in tandem mass spectrometry prediction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Bypassing Fast Time Scales of the Hodgkin-Huxley Neuron Model via a Thresholded Hard Reset

We propose a modification to the Hodgkin-Huxley model to reduce the numerical stiffness of the equations by introducing an explicit voltage threshold. When this threshold is crossed, the voltage and the gating variables are reset to constant values. It is found that, for all of the current stimuli considered, the proposed model accurately reproduces the behavior of the baseline Hodgkin-Huxley model while bypassing the fast dynamics of spiking. Specifically, the model accurately reproduces the spike times and, between spikes, the time courses of the membrane potential and gating variables.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1982

VLBI observations of the nucleus and jet of M87

The nucleus and jet of M87 was mapped with an eight-station very long baseline interferometric array at 18 cm wavelength with high dynamic range. It was found that the nucleus of M87 consists of a core-jet structure with a peak brightness temperature greater than 10 to the 10th K. Emission is shown to extend for more than 50 milli-arcsec with a brightness temperature exceeding 10 to the 8th K along a position angle of 288 degrees, which precisely matches the position angle of the 20'' radio/optical/X-ray jet. In addition, the nucleus contains a significant structure of lower brightness at approximately the same position angle, although no counterjet is observed. By invoking relativistic beaming in order to enhance the jet and diminish the counterjet, it is shown that the jet must be aligned within about 60 degrees to our line of sight, and its flow velocity must exceed about 60% of the speed of light. The knots embedded in the 20'' jet contain no bright compact structures, and the sizes of the innermost knot (knot D) is between 0.1-0.3''.

Reid, M. J.↗

NASA NTRS2009

Magnetospheric Multiscale (MMS) Mission Commissioning Phase Orbit Determination Error Analysis

The Magnetospheric MultiScale (MMS) mission commissioning phase starts in a 185 km altitude x 12 Earth radii (RE) injection orbit and lasts until the Phase 1 mission orbits and orientation to the Earth-Sun li ne are achieved. During a limited time period in the early part of co mmissioning, five maneuvers are performed to raise the perigee radius to 1.2 R E, with a maneuver every other apogee. The current baseline is for the Goddard Space Flight Center Flight Dynamics Facility to p rovide MMS orbit determination support during the early commissioning phase using all available two-way range and Doppler tracking from bo th the Deep Space Network and Space Network. This paper summarizes th e results from a linear covariance analysis to determine the type and amount of tracking data required to accurately estimate the spacecraf t state, plan each perigee raising maneuver, and support thruster cal ibration during this phase. The primary focus of this study is the na vigation accuracy required to plan the first and the final perigee ra ising maneuvers. Absolute and relative position and velocity error hi stories are generated for all cases and summarized in terms of the ma ximum root-sum-square consider and measurement noise error contributi ons over the definitive and predictive arcs and at discrete times inc luding the maneuver planning and execution times. Details of the meth odology, orbital characteristics, maneuver timeline, error models, and error sensitivities are provided.

Chung, Lauren R.↗

NASA NTRS2011

Flight Dynamics Aspects of a Large Civil Tiltrotor Simulation Using Translational Rate Command

An in-depth analysis of a Large Civil Tiltrotor simulation with a Translational Rate Command control law that uses automatic nacelle deflections for longitudinal velocity control and lateral cyclic for lateral velocity control is presented. Results from piloted real-time simulation experiments and offline time and frequency domain analyses are used to investigate the fundamental flight dynamic and control mechanisms of the control law. The baseline Translational Rate Command conferred handling qualities improvements over an attitude command attitude hold control law but in some scenarios there was a tendency to enter PIO. Nacelle actuator rate limiting strongly influenced the PIO tendency and reducing the rate limits degraded the handling qualities further. Counterintuitively, increasing rate limits also led to a worsening of the handling qualities ratings. This led to the identification of a nacelle rate to rotor longitudinal flapping coupling effect that induced undesired pitching motions proportional to the allowable amount of nacelle rate. A modification that applied a counteracting amount of longitudinal cyclic proportional to the nacelle rate significantly improved the handling qualities. The lateral axis of the Translational Rate Command conferred Level 1 handling qualities in a Lateral Reposition maneuver. Analysis of the influence of the modeling fidelity on the lateral flapping angles is presented. It is showed that the linear modeling approximation is likely to have under-predicted the side-force and therefore under-predicted the lateral flapping at velocities above 15 ft/s. However, at lower velocities, and therefore more weakly influenced by the side force modeling, the accelerations that the control law commands also significantly influenced the peak levels of lateral flapping achieved.

Lawrence, Ben↗

NASA NTRS2012

Digital Calibration of TR Modules for Real-Tme Digital Beamforming SweepSAR Architectures

Real-time digital beamforming, combined with lightweight, large aperture reflectors, enable a new architecture, which is the baseline for the proposed DESDynI [Deformation, Ecosystem Structure, and Dynamics of Ice] SAR [Synthetic Aperture Radar] Instrument (or DSI). This new instrument concept requires new methods for calibrating multiple simultaneous channels. The calibration of current state-of-the-art Electronically Steered Arrays typically involves pre-flight TR (Transmit/Receive) module characterization over temperature, and in-flight correction based on measured temperatures. This method ignores the effects of element aging and any drifts unrelated to temperature. We are developing new digital calibration of digital beamforming arrays, which helps to reduce development time, risk and cost. Precision calibrated TR modules enable real-time beamforming architectures by accurately tracking modules' characteristics through closed-loop digital calibration, which tracks systematic changes regardless of temperature. The benefit of this effort is that it would enable a new, lightweight radar architecture, with on-board digital beamforming. This provides significantly larger swath coverage than conventional SAR architectures

Hoffman, James Patrick↗

NASA NTRSDate not supplied

DeepONet-Assisted Optimization of Surface Topography for Transition Delay in A Mach 4.5 Boundary Layer

We use deep learning, an ensemble variationaltechnique (EnVar), and direct numerical simulations(DNS) to design an optimal topography for a two-dimensional roughness element that delays the on-set of laminar-turbulent transition in a Mach 4.5 flat-plate boundary layer. Deep operator networks (Deep-ONets), which have the known ability to learn com-plex nonlinear operators within dynamical systems,are used for machine learning. For the baseline config-uration of a smooth flat plate, the second-mode wavesat the DNS inflow cause a quick nonlinear breakdownof the high-speed boundary layer within the computa-tional domain. Results reported in the present studyvalidate the ability of DeepONets to model the tran-sition delay via a given topography of the roughnesselement. The computing cost to optimize the rough-ness element for minimal skin-friction drag is substan-tially lowered by the DeepONets-based reduced-ordermodel. In comparison to the baseline method of EnVaroptimization based on DNS alone, the DeepONets-based EnVar optimizer is able to delay transition pastthe outflow boundary of the computational domainwhile utilizing almost 5–6 times fewer DNS.

Machine Learning↗

NASA NTRSDate not supplied

DeepONet-Assisted Optimization of Surface Topography for Transition Delay in a Mach 4.5 Boundary Layer

We use deep learning, an ensemble variational technique (EnVar), and direct numerical simulations(DNS) to design an optimal topography for a two-dimensional roughness element that delays the on-set of laminar-turbulent transition in a Mach 4.5 flat-plate boundary layer. Deep operator networks (DeepONets), which have the known ability to learn complex nonlinear operators within dynamical systems, are used for machine learning. For the baseline configuration of a smooth flat plate, the second-mode waves at the DNS inflow cause a quick nonlinear breakdown of the high-speed boundary layer within the computational domain. Results reported in the present study validate the ability of DeepONets to model the transition delay via a given topography of the roughness element. The computing cost to optimize the rough-ness element for minimal skin-friction drag is substantially lowered by the DeepONets-based reduced-order model. In comparison to the baseline method of EnVar optimization based on DNS alone, the DeepONets-based EnVar optimizer is able to delay transition past the outflow boundary of the computational domain while utilizing almost 5–6 times fewer DNS.

Machine Learning↗

DOE OSTI2020

Nationwide Energy Saving Potential Evaluation for Office Buildings with Occupant-Based Building Controls

The heating ventilation and air-conditioning (HVAC) system is a major contributor to building energy consumption. This paper aims to quantify the nationwide energy savings potential of implementing the occupancy-based control (OBC) for the HVAC system in typical medium-sized office buildings using a whole building simulation program (i.e., EnergyPlus). First, the medium-sized office from the DOE Commercial Prototype Building Models was modified to have detailed layout and space functions. Then, a statistic-algorithm-based tool was used to generate the dynamic occupancy schedules for various rooms. Next, both a baseline case and two OBC cases were created for the comparison based on the updated ASHRAE Standard 90.1 and ASHRAE Guideline 36. The HVAC operation in the baseline case follows a static occupancy schedule and fixed setpoint schedules for both room air temperatures and minimal system outside air flowrates, while the proposed OBC cases use the room temperature reset, system minimum outdoor airflow reset, and zone minimal supply airflow rate reset. These cases were extended to five climate zones in the United States to further quantify the energy savings potential associated with the OBC on a nationwide scale. The preliminary result of this case study shows that there could be significant energy savings potential from the proposed OBC strategies in medium-sized office buildings in the United States.

Pang, Zhihong↗

NASA NTRS1991

Neural network application to aircraft control system design

The feasibility of using artificial neural networks as control systems for modern, complex aerospace vehicles is investigated via an example aircraft control design study. The problem considered is that of designing a controller for an integrated airframe/propulsion longitudinal dynamics model of a modern fighter aircraft to provide independent control of pitch rate and airspeed responses to pilot command inputs. An explicit model following controller using H infinity control design techniques is first designed to gain insight into the control problem as well as to provide a baseline for evaluation of the neurocontroller. Using the model of the desired dynamics as a command generator, a multilayer feedforward neural network is trained to control the vehicle model within the physical limitations of the actuator dynamics. This is achieved by minimizing an objective function which is a weighted sum of tracking errors and control input commands and rates. To gain insight in the neurocontrol, linearized representations of the nonlinear neurocontroller are analyzed along a commanded trajectory. Linear robustness analysis tools are then applied to the linearized neurocontroller models and to the baseline H infinity based controller. Future areas of research are identified to enhance the practical applicability of neural networks to flight control design.

Troudet, Terry↗

NASA NTRS1991

Neural network application to aircraft control system design

The feasibility of using artificial neural network as control systems for modern, complex aerospace vehicles is investigated via an example aircraft control design study. The problem considered is that of designing a controller for an integrated airframe/propulsion longitudinal dynamics model of a modern fighter aircraft to provide independent control of pitch rate and airspeed responses to pilot command inputs. An explicit model following controller using H infinity control design techniques is first designed to gain insight into the control problem as well as to provide a baseline for evaluation of the neurocontroller. Using the model of the desired dynamics as a command generator, a multilayer feedforward neural network is trained to control the vehicle model within the physical limitations of the actuator dynamics. This is achieved by minimizing an objective function which is a weighted sum of tracking errors and control input commands and rates. To gain insight in the neurocontrol, linearized representations of the nonlinear neurocontroller are analyzed along a commanded trajectory. Linear robustness analysis tools are then applied to the linearized neurocontroller models and to the baseline H infinity based controller. Future areas of research identified to enhance the practical applicability of neural networks to flight control design.

Troudet, Terry↗