SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Fatigue data for refractory alloys at elevated temperatures in ultrahigh vacuum environments
Tensile strength retaining characteristics of aluminum alloys determined after varied soaking periods at various elevated temperatures
Fabrication methods and tests for salt-stress corrosion and elevated temperature effects on compressive strength of titanium alloy skin stringer panels
A review is made of the test techniques that have been developed and used by the NACA for experimental research in aircraft structures at elevated temperatures. Some experimental results are presented. Remarks are included on the problem of model scaling for testing of structures at high temperatures. (author)
The purpose of this program was to extend the work performed in the base program (CR 182247) into the regime of time-dependent crack growth under isothermal and thermal mechanical fatigue (TMF) loading, where creep deformation also influences the crack growth behavior. The investigation was performed in a two-year, six-task, combined experimental and analytical program. The path-independent integrals for application to time-dependent crack growth were critically reviewed. The crack growth was simulated using a finite element method. The path-independent integrals were computed from the results of finite-element analyses. The ability of these integrals to correlate experimental crack growth data were evaluated under various loading and temperature conditions. The results indicate that some of these integrals are viable parameters for crack growth prediction at elevated temperatures.
Ballistic impact tests were conducted on fabric made from both Poly(phenylene benzobizoxazole) (PBO) and Kevlar 29 which were selected to be similar in weave pattern, areal density, and fiber denier. The projectiles were 2.54-cm- (1-in.-) long aluminum cylinders with a diameter of 1.27 cm (0.5 in.). The fabric specimens were clamped on four sides in a 30.5-cm- (12-in.-) square frame. Tests on PBO were conducted at room temperature and at 260 C (500 F). A number of PBO specimens were aged in air at 204 and 260 C (400 and 500 F) before impact testing. Kevlar specimens were tested only at room temperature and with no aging. The PBO absorbed significantly more energy than the Kevlar at both room and elevated temperatures. However, after aging at temperatures of 204 C (400 F) and above, the PBO fabric lost almost all of its energy absorbing ability. It was concluded that PBO fabric is not a feasible candidate for fan containment system applications in supersonic jet engines where operating temperatures exceed this level.
A method based on a semiempirical procedure is presented for predicting static strength and creep buckling of unstiffened circular cylinders subjected to pure bending at elevated temperatures. The method is applicable to cylinders that are loaded into the inelastic stress range prior to buckling and fail in a local mode. The predicted bending moments associated with static strength and creep buckling are compared with experimental data (taken from NACA RM 57El7) obtained from tests at 500 F on 5052-0 aluminum-alloy cylinders with radius- thickness ratios ranging from 125 to 250.
Creep tests on polycrystalline copper with surface reoxidized or cleaned by argon bombardment at elevated temperatures and high vacuum
Fatigue tests and fatigue life evaluation for titanium-aluminum-molybdenum sheet at elevated temperatures with residual stress
A technique has been developed for the encapsulation of rock samples in order to prevent the chemical alterations which commonly accompany paleointensity measurements at elevated temperatures. The technique involves vacuum pumping at about 100 C of the sample as placed in a silica tube. The tube containing the sample and a Ti 'getter' are sealed under vacuum. Measurements can be made at 200 and 300 C. Immediately after this, the sample is sealed-off from the getter. The sample is now ready for measurements at higher temperatures.
HF fatigue tests in high vacuum environment on recrystallized molybdenum base alloy TZC for elevated temperature fatigue
Fatigue data for refractory molybdenum-base alloys subjected to elevated temperatures in ultrahigh vacuum environment
Stainless-steel honeycomb-core sandwich panels which differed primarily in skin thicknesses were tested at elevated temperatures under static and aerodynamic conditions. The results of these tests were evaluated to determine the insulating effectiveness and structural integrity of the panels. The static radiant-heating tests were performed in front of a quartz-tube radiant heater at panel skin temperatures up to 1,5000 F. The aerodynamic tests were made in a Mach 1.4 heated blowdown wind tunnel. The tunnel temperature was augmented by additional heat supplied by a radiant heater which raised the panel surface temperature above 8000 F during air flow. Static radiant-heating tests of 2 minutes duration showed that all the panels protected the load-carrying structure about equally well. Thin-skin panels showed an advantage for this short-time test over thick-skin panels from a standpoint of weight against insulation. Permanent inelastic strains in the form of local buckles over each cell of the honeycomb core caused an increase in surface roughness. During the aero- dynamic tests all of the panels survived with little or no damage, and panel flutter did not occur.
Refractory alloy creep test data for molybdenum base alloy TZM, pure tantalum, and tantalum base alloys T-111 and ASTAR-811C at elevated temperatures in ultrahigh vacuum
The purpose of this report is to provide a final report for the period of 12/1/03 through 11/30/04 for NASA Cooperative Agreement NCC3-776, entitled "Elevated Temperature Testing and Modeling of Advanced Toughened Ceramic Materials." During this final period, major efforts were focused on both the determination of mechanical properties of advanced ceramic materials and the development of mechanical test methodologies under several different programs of the NASA-Glenn. The important research activities made during this period are: 1. Mechanical properties evaluation of two gas-turbine grade silicon nitrides. 2) Mechanical testing for fuel-cell seal materials. 3) Mechanical properties evaluation of thermal barrier coatings and CFCCs and 4) Foreign object damage (FOD) testing.
Degradation of the material properties of the Al alloy is examined to determine the effects of moist air and predissolved hydrogen on elevated-temperature fatigue and fracture resistance. Experiments are conducted at 175 C in both moist air and high vacuum with as-processed specimens and specimens that are vacuum-heat-treated. Fracture mechanics characterizations are made for initiation and propagation fracture toughnesses during rising load, fatigue-crack propagation kinetics, and sustained-load crack-growth rates. Time-dependent embrittlement at intermediate temperatures is identified in both plate and extrusion samples of the Al-Fe-Si-V alloy 8009. Intermediate temperature cracking is found to be the same for each case in both vacuum and moist air, and the vacuum heat treatment does not significantly affect the results.
The eutectic system Ni-33Al-31Cr-3Mo was directionally solidified at rates ranging from 7.6 to 508 mm/h. Samples were examined for microstructure and alloy chemistry, compression tested at 1200 and 1300 K, and subjected to room temperature fracture toughness measurements. Lamellar eutectic grains were formed at 12.7 mm/h; however cellular structures with a radial eutectic pattern developed at faster growth rates. Elevated temperature compression testing between 10(exp -4) to 10(exp -7)/s did not reveal an optimum growth condition, nor did any single growth condition result in a significant fracture toughness advantage. The mechanical behavior, taken together, suggests that Ni-33Al-31Cr-3Mo grown at rates from 25.4 to 254 mm/h will have nominally equivalent properties.
The mechanical properties of single crystal turbine blade alloys in a gaseous hydrogen environment were determined. These alloys are proposed for use in space propulsion systems in pure or partial high pressure hydrogen environments at elevated temperatures. Mechanical property tests included: tensile, creep, low fatigue (LCF), and crack growth. Specimens were in both transverse and longitudinal directions relative to the casting solidification direction. Testing was conducted on solid specimens exposed to externally pressurized environments of gaseous hydrogen and hydrogen-enriched steam.