Results for “elevation gradient” — Page 9

NASA NTRS1994

Height and altitude distribution of large volcanoes on Venus

Magellan data reveal 156 large volcanoes on Venus (greater than 100 km in diameter) which range in height from 300 m to 5.55 km, with an average height of 1.42 km. On the basis of theory it has been predicted that the development of neutral buoyancy zones (NBZ) on Venus and thus the resulting volcanic deposits are strongly influenced by the altitude-controlled variations in surface pressure. The distribution and height of these large volcanoes as a function of altitude was examined to begin to test these predications. Although large volcanoes are relatively uniformly distributed in altitude, there may be a slight paucity of volcanoes at the lowest elevations and a slight surplus at mid-altitudes. In addition, it is observed that the volcanoes at the highest altitudes tend to be the tallest. The observed distributions at low-mid altitudes is consistent with the prediction of NBZ theory. The high altitude distribution and heights, however, emphasize the necessity of considering other factors, such as tectonic setting, edifice age, magma supply, and thermal gradient, in describing the location and development of large volcanoes on Venus.

Keddie, S. T.↗

NASA NTRS1991

Thermoelastic vibration test techniques

The structural integrity of proposed high speed aircraft can be seriously affected by the extremely high surface temperatures and large temperature gradients throughout the vehicle's structure. Variations in the structure's elastic characteristics as a result of thermal effects can be observed by changes in vibration frequency, damping, and mode shape. Analysis codes that predict these changes must be correlated and verified with experimental data. The experimental modal test techniques and procedures used to conduct uniform, nonuniform, and transient thermoelastic vibration tests are presented. Experimental setup and elevated temperature instrumentation considerations are also discussed. Modal data for a 12 by 50 inch aluminum plate heated to a temperature of 475 F are presented. These data show the effect of heat on the plate's modal characteristics. The results indicated that frequency decreased, damping increased, and mode shape remained unchanged as the temperature of the plate was increased.

Kehoe, Michael W.↗

NASA NTRS1991

Thermoelastic vibration test techniques

The structural integrity of proposed high speed aircraft can be seriously affected by the extremely high surface temperatures and large temperature gradients throughout the vehicle's structure. Variations in the structure's elastic characteristics as a result of thermal effects can be observed by changes in vibration frequency, damping, and mode shape. Analysis codes that predict these changes must be correlated and verified with experimental data. The experimental modal test techniques and procedures used to conduct uniform, nonuniform, and transient thermoelastic vibration tests are presented. Experimental setup and elevated temperature instrumentation considerations are also discussed. Modal data for a 12 by 50 inch aluminum plate heated to a temperature of 475 F are presented. These data show the effect of heat on the plate's modal characteristics. The results indicated that frequency decreased, damping increased, and mode shape remained unchanged as the temperature of the plate was increased.

Kehoe, Michael W.↗

NASA NTRS1976

Investigation of Critical Burning of Fuel Droplets

An earlier analysis for the combustion response of a liquid monopropellant strand (hydrazine) was extended to consider individual droplets and sprays. While small drops gave low or negative response, large droplets provided response near unity at low frequencies, with the response declining at frequencies greater than the characteristic liquid phase frequency. Temperature gradients in the liquid phase resulted in response peaks greater than unity. A second response peak was found for large drops which corresponded to gas phase transient effects. Spray response was generally reduced from the response of the largest injected droplet, however, even a small percentage of large droplets can yield appreciable response. An apparatus was designed and fabricated to allow observation of bipropellant fuel spray combustion at elevated pressures. A locally homogeneous model was developed to describe this combustion process which allows for high pressure phenomena associated with the thermodynamic critical point.

Chanin, S. P.↗

NASA NTRS1979

High-temperature microphone system

Pressure fluctuations in air or other gases in an area of elevated temperature are measured using a condenser microphone located in the area of elevated temperature and electronics for processing changes in the microphone capacitance located outside the area the area and connected to the microphone by means of high-temperature cable assembly. The microphone includes apparatus for decreasing the undesirable change in microphone sensitivity at high temperatures. The high temperature cable assembly operates as a half-wavelength transmission line in an AM carrier system and maintains a large temperature gradient between the two ends of the cable assembly. The processing electronics utilizes a voltage controlled oscillator for automatic tuning thereby increasing the sensitivity of the measuring apparatus.

Zuckerwar, A. J.↗

NASA NTRS1994

Elevated Temperature Crack Propagation

This paper is a summary of two NASA contracts on high temperature fatigue crack propagation in metals. The first evaluated the ability of fairly simple nonlinear fracture parameters to correlate crack propagation. Hastelloy-X specimens were tested under isothermal and thermomechanical cycling at temperatures up to 980 degrees C (1800 degrees F). The most successful correlating parameter was the crack tip opening displacement derived from the J-integral. The second evaluated the ability of several path-independent integrals to correlate crack propagation behavior. Inconel 718 specimens were tested under isothermal, thermomechanical, temperature gradient, and creep conditions at temperatures up to 650 degrees C (1200 degrees F). The integrals formulated by Blackburn and by Kishimoto correlated the data reasonably well under all test conditions.

Orange, Thomas W.↗

NASA NTRSDate not supplied

Airborne Lidar Measurements of Ozone and Aerosol Profiles Over Major US Metropolitan Areas

During field missions in 2021 and 2023, the airborne NASA Langley Research Center High Spectral Resolution Lidar 2 (HSRL 2) measured the temporal and spatial evolution of ozone and aerosol distributions impacting urban air quality over the four most populated cities in the United States. HSRL-2 measurements in 2021 were acquired over the Houston metropolitan region, including Galveston Bay and the Houston Ship Channel, as part of the NASA Tracking Aerosol Convection Experiment – Air Quality (TRACER-AQ) mission conducted in collaboration with the Department of Energy. HSRL-2 measurements were acquired over Los Angeles, Chicago, and New York City in 2023 as part of the NASA Synergistic TEMPO Air Quality Science (STAQS) mission conducted in collaboration with the NOAA Atmospheric Emissions and Reactions Observed from Megacities to Marine Areas (AEROMMA) mission. HSRL 2 provided nadir vertical profiles of ozone, aerosol backscatter, extinction, and depolarization as the aircraft flew lawnmower type patterns at 9 km for several hours over these urban areas. HSRL-2 measured profiles of aerosol extinction and aerosol optical depth (AOD) via the HSRL technique at 355 and 532 nm and profiles of aerosol backscatter and depolarization at 355, 532, and 1064 nm. Mixed Layer Heights (MLH) were derived by locating sharp vertical gradients in the profiles of aerosol backscatter. The flights were comprised of up to three repeating lawnmower patterns over each city showing the evolution of the ozone and aerosol distributions from the morning through the afternoon. The HSRL-2 measurements reveal ozone enhancements near the surface as well as in the free troposphere above the mixed layer. Some lidar measurements over Chicago and New York City show the daytime boundary layer growing into elevated layers of biomass burning aerosol. These layers complicate efforts to use column-integrated satellite measurements to infer surface air quality. As expected, mixed layer height (MLH) typically increased significantly during the day; however, during some flights, particularly over the Houston area, MLH also showed large spatial variability associated with changes in surface cover and/or small scale circulations. Often HSRL-2 measurements of AOD also showed large spatial and temporal variability throughout the day over these cities. We discuss how the ozone and aerosol profiles are averaged over different vertical and horizontal scales near the surface for use in assessments of regional air quality models and near-surface ozone retrievals from NASA’s recently launched Tropospheric Emissions: Monitoring Pollution (TEMPO) satellite.

Lidar↗

NASA NTRSDate not supplied

HSRL-2 Observations over the Houston, TX Region during TRACER-AQ

During field missions in 2021 and 2023, the airborne NASA Langley Research Center High Spectral Resolution Lidar 2 (HSRL 2) measured the temporal and spatial evolution of ozone and aerosol distributions impacting urban air quality over the four most populated cities in the United States. HSRL-2 measurements in 2021 were acquired over the Houston metropolitan region, including Galveston Bay and the Houston Ship Channel, as part of the NASA Tracking Aerosol Convection Experiment – Air Quality (TRACER-AQ) mission conducted in collaboration with the Department of Energy. HSRL-2 measurements were acquired over Los Angeles, Chicago, and New York City in 2023 as part of the NASA Synergistic TEMPO Air Quality Science (STAQS) mission conducted in collaboration with the NOAA Atmospheric Emissions and Reactions Observed from Megacities to Marine Areas (AEROMMA) mission. HSRL 2 provided nadir vertical profiles of ozone, aerosol backscatter, extinction, and depolarization as the aircraft flew lawnmower type patterns at 9 km for several hours over these urban areas. HSRL-2 measured profiles of aerosol extinction and aerosol optical depth (AOD) via the HSRL technique at 355 and 532 nm and profiles of aerosol backscatter and depolarization at 355, 532, and 1064 nm. Mixed Layer Heights (MLH) were derived by locating sharp vertical gradients in the profiles of aerosol backscatter. The flights were comprised of up to three repeating lawnmower patterns over each city showing the evolution of the ozone and aerosol distributions from the morning through the afternoon. The HSRL-2 measurements reveal ozone enhancements near the surface as well as in the free troposphere above the mixed layer. Some lidar measurements over Chicago and New York City show the daytime boundary layer growing into elevated layers of biomass burning aerosol. These layers complicate efforts to use column-integrated satellite measurements to infer surface air quality. As expected, mixed layer height (MLH) typically increased significantly during the day; however, during some flights, particularly over the Houston area, MLH also showed large spatial variability associated with changes in surface cover and/or small scale circulations. Often HSRL-2 measurements of AOD also showed large spatial and temporal variability throughout the day over these cities. We discuss how the ozone and aerosol profiles are averaged over different vertical and horizontal scales near the surface for use in assessments of regional air quality models and near-surface ozone retrievals from NASA’s recently launched Tropospheric Emissions: Monitoring Pollution (TEMPO) satellite.

Lidar↗

NASA NTRS1994

Recent bed rest results and countermeasure development at NASA

Bedrest studies of normal subjects provide opportunities to understand physiologic responses to supine posture and inactivity. Furthermore, head-down tilt has been a valuable procedure to investigate adaptation to microgravity and development of countermeasures to maintain the health and well-being of humans during space-flight. Recent bedrest experiments at NASA have ranged in duration from a few hours to 17 weeks. Acute studies of 6 degrees head-down tilt indicate that elevation of capillary blood pressure from 28 to 34 mm Hg and increased capillary perfusion in tissues of the head cause facial and intracranial edema. Intracranial pressure increases from 2 to 17 mm Hg going from upright posture to 6 degrees head-down tilt. Microvessels of the head have a low capacity to constrict and diminish local perfusion. Elevation of blood and tissue fluid pressures/flow in the head may also explain the higher headward bone density associated with long-term head-down tilt. These mechanistic studies of head-down tilt, along with a better understanding of the relative stresses involved with upright posture and lower body negative pressure, have facilitated development of suitable physiologic countermeasures to maintain astronaut health during microgravity. Presently no exercise hardware is available to provide a blood pressure gradient from head to feet in space. However, recent studies in our laboratory suggest that treadmill exercise using a graded lower-body compression suit and 100 mmHg lower body negative pressure provides equivalent or greater physiologic stress than similar upright exercise on Earth. Therefore, exercise within a lower body negative pressure chamber may provide a cost-effective and simple countermeasure to maintain the cardiovascular and neuro-musculoskeletal systems of astronauts during long-duration flight.

manned↗

NASA NTRS2013

The First X-ray Diffraction Patterns of Clay Minerals from Gale Crater

The Mars Science Laboratory (MSL) Rover, Curiosity spent approx 150 sols at Yellowknife Bay (YKB) studying a section of fluvio-lacustrine sedimentary rocks (with potential indications of volcanic influence), informally known as the Yellowknife Bay formation. YKB lies in a distal region of the Peace Vallis alluvial fan, which extends from the northern rim of Gale Crater toward the dune field at the base of Mt Sharp. Sedimentological and stratigraphic observations are consistent with the Yellowknife Bay formation being part of a distal fan deposit, which could be as young as middle Hesperian to even early Amazonian in age (approx 3.5 to 2.5 Ga). The Yellowknife Bay formation hosts a unit of mudstone called the Sheepbed member. Curiosity obtained powdered rock samples from two drill holes in the Sheepbed Member, named John Klein and Cumberland, and delivered them to instruments in Curiosity. Data from CheMin, a combined X-ray diffraction (XRD)/X-ray fluorescence instrument (XRF), has allowed detailed mineralogical analysis of mudstone powders revealing a clay mineral component of approx 20 wt.% in each sample. The clay minerals are important indicators of paleoenvironmental conditions and sensitive recorders of post-depositional alteration processes. The XRD pattern of John Klein reveals a 021 band consistent with a trioctahedral phyllosilicate. A broad peak at approx 10A with a slight inflexion at approx 12A indicates the presence of 2:1 type clay minerals in the John Klein sample. The trioctahedral nature of the clay minerals, breadth of the basal reflection, and presence of a minor component with larger basal spacing suggests that John Klein contains a trioctahedral smectite (probably saponite), whose interlayer is largely collapsed because of the low-humidity conditions. The XRD patterns show no evidence of corrensite (mixed-layer chlorite/smectite) or chlorite, which are typical diagenetic products of trioctahedral smectites when subjected to burial and heating >60degC in the presence of water. Given estimated geothermal gradients on Mars temperatures <60 degC might still be consistent with (but do not require) moderate burial. However, our ability to identify interstratified minerals is greatly limited by the lack of access to traditional treatments methods used in the lab (e.g., ethylene glycol solvation). Our preferred explanation for the origin of trioctahedral smectites in Sheepbed mudstone is in situ production via reaction of olivine, water and Si-bearing amorphous material, an important mudstone component detected by XRD. Elevated levels of magnetite in the Sheepbed and the trioctahedral monomineralic nature of the clay minerals support this model. These observations, combined with previous studies of olivine stability, support the persistence of circum-neutral hydrous conditions for thousands of years at YKB.

Bristow, Thomas↗

NASA NTRS2014

Paleoenvironmental Implications of Clay Minerals at Yellowknife Bay, Gale Crater, Mars

The Mars Science Laboratory (MSL) Rover, Curiosity spent approx 150 sols at Yellowknife Bay (YKB) studying a section of fluvio-lacustrine sedimentary rocks (with potential indications of volcanic influence), informally known as the Yellowknife Bay formation. YKB lies in a distal region of the Peace Vallis alluvial fan, which extends from the northern rim of Gale Crater toward the dune field at the base of Mt Sharp. Sedimentological and stratigraphic observations are consistent with the Yellowknife Bay formation being part of a distal fan deposit, which could be as young as middle Hesperian to even early Amazonian in age (approx. 3.5 to 2.5 Ga). The Yellowknife Bay formation hosts a unit of mudstone called the Sheepbed member. Curiosity obtained powdered rock samples from two drill holes in the Sheepbed Member, named John Klein and Cumberland, and delivered them to instruments in Curiosity. Data from CheMin, a combined X-ray diffraction (XRD)/X-ray fluorescence instrument (XRF), has allowed detailed mineralogical analysis of mudstone powders revealing a clay mineral component of approx. 20 wt.% in each sample. The clay minerals are important indicators of paleoenvironmental conditions and sensitive recorders of post-depositional alteration processes. The XRD pattern of John Klein reveals a 02l band consistent with a trioctahedral phyllosilicate. A broad peak at approx. 10A with a slight inflexion at approx. 12A indicates the presence of 2:1 type clay minerals in the John Klein sample. The trioctahedral nature of the clay minerals, breadth of the basal reflection, and presence of a minor component with larger basal spacing suggests that John Klein contains a trioctahedral smectite (probably saponite), whose interlayer is largely collapsed because of the low-humidity conditions. The XRD patterns show no evidence of corrensite (mixed-layer chlorite/smectite) or chlorite, which are typical diagenetic products of trioctahedral smectites when subjected to burial and heating >60 C in the presence of water. Given estimated geothermal gradients on Mars temperatures <60 C might still be consistent with (but do not require) moderate burial. However, our ability to identify interstratified minerals is greatly limited by the lack of access to traditional treatments methods used in the lab (e.g., ethylene glycol solvation). Our preferred explanation for the origin of trioctahedral smectites in Sheepbed mudstone is in situ production via reaction of olivine, water and Si-bearing amorphous material, an important mudstone component detected by XRD. Elevated levels of magnetite in the Sheepbed and the trioctahedral monomineralic nature of the clay minerals support this model. These observations, combined with previous studies of olivine stability, support the persistence of circum-neutral hydrous conditions for thousands of years at YKB.

MSL↗

NASA NTRS1984

Observations of frontal zone structures with a VHF Doppler radar and radiosondes, part 1.2A

The SOUSY-VHF-Radar is a pulsed coherent radar operating at 53.5 MHz and located near Bad Lauterbert, West Germany. Since 1977, the facility, operated by the Max-Planck-Institut fur Aeronomie, has been used to make a series of frontal passage observations in the spring and fall. Experiments in winter have been difficult because part of the transmitting and receiving array is usually covered by snow during that part of the year. Wavelengths around 6 m are known to be sensitive to the vertical temperature structure of the atmosphere (GREEN and GAGE, 1980; RASTOGI and ROTTGER, 1982). Thus, it has been possible to use radars operating at frequencies near 500 MHz to locate the tropopause. Comparisons between radar data and radiosonde data have shown that there is a large gradient in the radar reflectivity at the height where the radiosonde tropopause occurs. An experiment carried out by ROTTGER (1979) on March 15 to 16, 1977, showed that the radar's sensitivity to the vertical temperature structure could also be used to locate the position of fronts. The SOUSY-VHF-Radar consists of a transmitting array, also used for receiving in some configurations, that can be scanned in the off-vertical direction but not at sufficiently low elevation angles to study the horizontal extent of structures.

Larsen, M. F.↗

NASA NTRS1984

Muon spin rotation studies

The bulk of the muon spin rotation research work centered around the development of the muon spin rotation facility at the Alternating Gradient Synchrotron (AGS) of Brookhaven National Laboratory (BNL). The collimation system was both designed and fabricated at Virginia State University. This improved collimation system, plus improvements in detectors and electronics enabled the acquisition of spectra free of background out to 15 microseconds. There were two runs at Brookhaven in 1984, one run was devoted primarily to beam development and the other run allowed several successful experiments to be performed. The effect of uniaxial strain on an Fe(Si) crystal at elevated temperature (360K) was measured and the results are incorporated herein. A complete analysis of Fe pulling data taken earlier is included.

Source record↗

NASA NTRS1994

Meridional distributions of NO(X), NO(Y), and other species in the lower statosphere and upper troposphere during AASE 2

The meridional distribution of NO(x) in the lower stratosphere and upper troposphere is inferred form 10 flights of the NASA DC-8 in the northern winter of 1992 along with like distributions of NO(y), NO(x)/NO(y), CO, and C2Cl4. In the lowest few km of the stratosphere there is little vertical gradient in NO(x) over the range of latitiudes measured (40 deg-90 deg N). There is a substantial latitudinal gradient, with 50 pptv above the pole and 120 pptv near 40 deg N. In the uppermost few km of the troposphere, background values range from 30 pptv over the pole to 90 pptv near 40 deg N. On two occasions higher values, up to 140 pptv in the mean, were seen 2-3 km below the tropopause in association with frontal systems. The meridional distributions of CO and C2Cl4 show the same feature, suggesting that the source of the elevated NO(x) is near the earth's system.

Weinheimer, A. J.↗

NASA NTRS2004

Chandra Observations and Models of the Mixed Morphology Supernova Remnant W44: Global Trends

We report on the Chandra observations of the archetypical mixed morphology (or thermal composite) supernova remnant, W44. As with other mixed morphology remnants, W44's projected center is bright in thermal X-rays. It has an obvious radio shell, but no discernable X-ray shell. In addition, X-ray bright knots dot W44's image. The spectral analysis of the Chandra data show that the remnant s hot, bright projected center is metal-rich and that the bright knots are regions of comparatively elevated elemental abundances. Neon is among the affected elements, suggesting that ejecta contributes to the abundance trends. Furthermore, some of the emitting iron atoms appear to be underionized with respect to the other ions, providing the first potential X-ray evidence for dust destruction in a supernova remnant. We use the Chandra data to test the following explanations for W44's X-ray bright center: 1.) entropy mixing due to bulk mixing or thermal conduction, 2.) evaporation of swept up clouds, and 3.) a metallicity gradient, possibly due to dust destruction and ejecta enrichment. In these tests, we assume that the remnant has evolved beyond the adiabatic evolutionary stage, which explains the X-ray dimness of the shell. The entropy mixed model spectrum was tested against the Chandra spectrum for the remnant's projected center and found to be a good match. The evaporating clouds model was constrained by the finding that the ionization parameters of the bright knots are similar to those of the surrounding regions. While both the entropy mixed and the evaporating clouds models are known to predict centrally bright X-ray morphologies, their predictions fall short of the observed brightness gradient. The resulting brightness gap can be largely filled in by emission from the extra metals in and near the remnant's projected center. The preponderance of evidence (including that drawn from other studies) suggests that W44's remarkable morphology can be attributed to dust destruction and ejecta enrichment within an entropy mixed, adiabatic phase supernova remnant. The Chandra data prompts a new question - by what astrophysical mechanisms are the metals distributed so inhomogeneously in the supernova remnant.

Shelton, R. L.↗

NASA NTRS2021

Recovery: Fast and Slow—Vegetation Response During the 2012–2016 California Drought

The 2012–2016 California Drought severely impacted natural vegetation across a wide range of environmental gradient. Although several studies have reported an increase in plant water stress and mortality, the spatiotemporal variations of ecosystem productivity responses and the associated environmental and biological drivers remain unclear. Here, using Enhanced Vegetation Index from the Moderate resolution imaging spectrometer, we found that 45% of the natural ecosystems showed an abrupt change (breakpoint [BP]) in productivity during 2012–2016. There were three major contrasting temporal patterns of productivity responses: (i) a steady increase under higher temperature followed by a decline due to accumulated moisture depletion (high elevation forest) or temperature decrease (high elevation nonforest), (ii) gradual decline during the drought followed by a rapid recovery within 1 year after drought stress was partially relieved, and (iii) both a gradual decline and an abrupt decline. The magnitude of abrupt changes was negatively correlated (r = −0.80, p < 0.001) with initial gradual changes. Overall, changes during BP offset, on average, 57% of the preceding gradual responses. The spatial variability in ecosystem response patterns is driven by both environmental and biological factors. Particularly, for forests, positive BP was driven by increasing rainfall and decreasing temperature, while negative BP was mainly driven by the precipitation anomaly. By 2019, 33% of the natural vegetation have recovered to the level of EVI in 2010. Ecosystem responses to multiyear droughts can influence ecosystem dynamics in a complex pattern. Multiple ecohydrological factors should be considered to understand and predict the long-term drought impacts on ecosystems.

Xi Yang↗

NASA NTRS1993

NASA-UVA Light Aerospace Alloy and Structures Technology Program (LA2ST)

The NASA-UVA Light Aerospace Alloy and Structures Technology (LA2ST) Program continues a high level of activity. Progress achieved between 1 Jan. and 30 Jun. 1993 is reported. The objective of the LA2ST Program is to conduct interdisciplinary graduate student research on the performance of next generation, light weight aerospace alloys, composites, and thermal gradient structures in collaboration with NASA-Langley researchers. The following projects are addressed: environmental fatigue of Al-Li-Cu alloys; mechanisms of localized corrosion and environmental fracture in Al-Cu-Li-Mg-Ag alloy X2095 and compositional variations; the effect of zinc additions on the precipitation and stress corrosion cracking behavior of alloy 8090; hydrogen interactions with Al-Li-Cu alloy 2090 and model alloys; metastable pitting of aluminum alloys; cryogenic fracture toughness of Al-Cu-Li + In alloys; the fracture toughness of Weldalite (TM); elevated temperature cracking of advanced I/M aluminum alloys; response of Ti-1100/SCS-6 composites to thermal exposure; superplastic forming of Weldalite (TM); research to incorporate environmental effects into fracture mechanics fatigue life prediction codes such as NASA FLAGRO; and thermoviscoplastic behavior.

Gangloff, Richard P.↗

NASA NTRS1988

Gravity-driven deformation of the crust on Venus

Intense horizontal deformation features are observed on the surface of Venus despite the apparent absence of terrestrial-style plate tectonics. High surface temperature, low erosion rate, and regions of elevated terrain suggest that gravity spreading may be responsible for some of these features. Gravity spreading on the Earth is known to cause extensive deformation in certain thin-skinned tectonic regions, where the uppermost layers become detached along a decollement. While the high pore pressures and soft sedimentary rocks frequently observed along decollements on the Earth are not plausible for Venus, temperature induced regions of ductile deformation may exist. Simple viscous models of gravity spreading above a ductile region of the crust are developed to examine the effects of rheology, thermal gradient, surface slope and crustal thickness on deformation. For a reasonable range of parameters, the models show that surface-slope-driven ductile deformation at relatively shallow depths in the crust is possible and may be capable of detaching the uppermost rigid portion of the crust, resulting in horizontal translation.

Smrekar, Suzanne↗