Search NASA⌕ Search

SEARCH · Search NASA

Results for “emissions properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Engine Gaseous, Aerosol Precursor and Particulated Flight Altitude Conditions

The overall objective of the NASA Atmospheric Effects of Aviation Project (AEAP) is to develop scientific bases for assessing atmospheric impacts of the exhaust emissions by both current and future fleets of subsonic and supersonic aircraft. Among the six primary elements of the AEAP is Emissions Characterization. The objective of the Emission Characterization effort is to determine the exhaust emission constituents and concentrations at the engine exit plane. The specific objective of this engine test is to obtain a database of gaseous and particulate emissions as a function of fuel sulfur and engine operating conditions. The database of the particulate emission properties is to be used as a comparative baseline with subsequent flight measurement. The engine used in this test was a Pratt & Whitney F1OO-200E turbofan engine. Aviation fuel (Jet A) with a range of fuel sulfur was used. Low and high sulfur values are limited by commercially available fuels and by fuel specification limits of O.3% by weight. Test matrix was set by parametrically varying the combustor inlet temperature (T(sub 3) between idle and maximum power setting at simulated SLS and up to five other altitudes for each fuel. Four diagnostic systems, extractive and non-intrusive, were assembled for the gaseous and particulate emissions characterization measurements study. NASA extractive system includes smoke meter and analyzers for measurement of CO, CO2, NO, NOx, O2, total unburnt hydrocarbons (THC), and SO2. Particulate emissions were characterized by University of Missouri-Rolla Mobile Aerosol Sampling System. A chemical ionization mass spectrometer from the Air Force Research Laboratory at Hanscom AFB was used to measure SO2 and HNO3. Aerodyne Research. Inc. used infrared tunable diode laser absorption to measure SO2, SO3, NO, H2O and CO2.

Wey, C. C.↗
NASA NTRS2017

Looking at A 0535+26 at Low Luminosities with NuSTAR

We report on two NuSTAR observations of the high-mass X-ray binary A 0535+26 taken toward the end of its normal 2015 outburst at very low 3-50 keV luminosities of approximately 1.4 times x 10 (sup 36) ergs per second and approximately 5 times x 10 (sup 35) ergs per second, which are complemented by nine Swift observations. The data clearly confirm indications seen in earlier data that the source's spectral shape softens as it becomes fainter. The smooth exponential rollover at high energies seen in the first observation evolves to a much more abrupt steepening of the spectrum at 20-30 keV. The continuum evolution can be nicely described with emission from a magnetized accretion column, modeled using the compmag model modified by an additional Gaussian emission component for the fainter observation. Between the two observations, the optical depth changes from 0.75 plus or minus 0.04 to 0.56 plus 0.01 (sup) minus 0.04 (sub), the electron temperature remains constant, and there is an indication that the column decreases in radius. Since the energy-resolved pulse profiles remain virtually unchanged in shape between the two observations, the emission properties of the accretion column reflect the same accretion regime. This conclusion is also confirmed by our result that the energy of the cyclotron resonant scattering feature (CRSF) at approximately 45 keV is independent of the luminosity, implying that the magnetic field in the region in which the observed radiation is produced is the same in both observations. Finally, we also constrain the evolution of the continuum parameters with the rotational phase of the neutron star. The width of the CRSF could only be constrained for the brighter observation. Based on Monte Carlo simulations of CRSF formation in single accretion columns, its pulse phase dependence supports a simplified fan beam emission pattern. The evolution of the CRSF width is very similar to that of the CRSF depth, which is, however, in disagreement with expectations.

Ballhausen, Ralf↗
DOE OSTI2025

Secondary electron emission for reticulated carbon foam surfaces using direct measurements and spectroscopic analysis

This study investigates secondary electron emission (SEE) characteristics of reticulated foams using direct measurements and analytical modeling. Total SEE was quantified, revealing suppression of up to 44% in carbon foam structures compared to planar graphite surfaces. An optimal geometric configuration was identified and supported by analytical models. SEE angular dependence experiments showed diverse behaviors: fiber-like behavior and directional dependence for pore and ligaments on the mm scale, with fuzz-like characteristics when the foam features are between 10–100 µm. Electron energy analyzer measurements showed that carbon foams preferentially suppress inelastic backscattered electrons (BSEs) more so than true secondary electrons (SEs). The analysis indicated a larger fraction of low-energy SE generation in foams compared to flat surfaces due to increased emission from curved fiber ligaments and tertiary SEs from high-energy BSEs. These findings have implications for design and optimization of materials with tailored electron emission properties for applications like plasma-facing components, spacecraft materials, and accelerator surfaces.

Auger↗
NASA NTRS2012

Integrated Instrument Simulator Suites for Earth Science

The NASA Earth Observing System Simulators Suite (NEOS3) is a modular framework of forward simulations tools for remote sensing of Earth's Atmosphere from space. It was initiated as the Instrument Simulator Suite for Atmospheric Remote Sensing (ISSARS) under the NASA Advanced Information Systems Technology (AIST) program of the Earth Science Technology Office (ESTO) to enable science users to perform simulations based on advanced atmospheric and simple land surface models, and to rapidly integrate in a broad framework any experimental or innovative tools that they may have developed in this context. The name was changed to NEOS3 when the project was expanded to include more advanced modeling tools for the surface contributions, accounting for scattering and emission properties of layered surface (e.g., soil moisture, vegetation, snow and ice, subsurface layers). NEOS3 relies on a web-based graphic user interface, and a three-stage processing strategy to generate simulated measurements. The user has full control over a wide range of customizations both in terms of a priori assumptions and in terms of specific solvers or models used to calculate the measured signals.This presentation will demonstrate the general architecture, the configuration procedures and illustrate some sample products and the fundamental interface requirements for modules candidate for integration.

emission↗
NASA NTRS2012

Integrated Instrument Simulator Suites for Earth Science

The NASA Earth Observing System Simulators Suite (NEOS3) is a modular framework of forward simulations tools for remote sensing of Earth's Atmosphere from space. It was initiated as the Instrument Simulator Suite for Atmospheric Remote Sensing (ISSARS) under the NASA Advanced Information Systems Technology (AIST) program of the Earth Science Technology Office (ESTO) to enable science users to perform simulations based on advanced atmospheric and simple land surface models, and to rapidly integrate in a broad framework any experimental or innovative tools that they may have developed in this context. The name was changed to NEOS3 when the project was expanded to include more advanced modeling tools for the surface contributions, accounting for scattering and emission properties of layered surface (e.g., soil moisture, vegetation, snow and ice, subsurface layers). NEOS3 relies on a web-based graphic user interface, and a three-stage processing strategy to generate simulated measurements. The user has full control over a wide range of customizations both in terms of a priori assumptions and in terms of specific solvers or models used to calculate the measured signals.This presentation will demonstrate the general architecture, the configuration procedures and illustrate some sample products and the fundamental interface requirements for modules candidate for integration.

radiative transfer↗
DOE OSTI2020

Photonic devices fabricated from (111)‐oriented single crystal diamond

Abstract Diamond is a material of choice in the pursuit of integrated quantum photonic technologies. So far, the majority of photonic devices fabricated from diamond are made from (100)‐oriented crystals. In this work, we demonstrate a methodology for the fabrication of optically active membranes from (111)‐oriented diamond. We use a liftoff technique to generate membranes, followed by chemical vapor deposition of diamond in the presence of silicon to generate homogenous silicon vacancy color centers with emission properties that are superior to those in (100)‐oriented diamond. We further use the diamond membranes to fabricate microring resonators with quality factors exceeding ~ 3000. Supported by finite‐difference time‐domain calculations, we discuss the advantages of (111)‐oriented structures as building blocks for quantum nanophotonic devices. image

Regan, Blake↗
DOE OSTI2025

Shifting the MLCT of d 6 metal complexes to the red and NIR

Light-active d 6 -coordination compounds hold great promise for light energy conversion, sensors and therapeutic applications. However, the activity in the red-to-NIR spectral region is highly desirable to convert solar light more efficiently, use low-cost red-light sources and activate these chromophores in biological tissue environment. Due to their versatility, tunability and broad intense absorption, d 6 -coordination compounds with metalto-ligand charge transfer (MLCT) transitions are especially interesting. This review article offers a comprehensive collection of strategies to tune MLCT excited states in d 6 metal complexes and gives insights on group 6 to group 9 transition metals and their respective state-of-the-art MLCT engineering towards red-shifted absorption and emission properties with long-lived excited states. Strategies comprise lowering the π* level of the ligands, destabilizing and mixing of the metal-based HOMO, switching within a group of transition metals, matrix effects and insights into dealing with excited state deactivation in the context of the energy gap law.

Metal to ligand charge transfer (MLCT)↗
DOE OSTI2025

Trinuclear Copper(I) and Silver(I) Complexes of a Pentafluorosulfanyl-Decorated Pyrazolate

Here, this study reports the synthesis and characterization of the first fluorinated coinage metal pyrazolates with SF 5 groups, specifically {[3-(SF 5 )­Pz]­M} 3 (M = Cu, Ag), and compares them to trifluoromethylated analogs. X-ray analysis reveals different pyrazolyl ligand orientations and metallophilic interactions, as well as supramolecular structures influenced by fluorinated substituents and metals. The {[3-(SF 5 )­Pz]­M} 3 complexes form face-to-face sandwich adducts with benzene. Photophysical investigations show that copper complexes exhibit long-lived phosphorescence, while silver analogs display fast fluorescence, with emission properties modulated by substituents, solvent environment, and intermolecular interactions. Computational studies confirm the experimental geometries and demonstrate that SF 5 substituents increase the π-acidity and enhance arene binding over the analogs featuring the smaller and less-electron-withdrawing CF 3 groups and provide insights into metallophilic interactions and photoluminescence. These newly uncovered SF 5 decorated materials, with enhanced π-acidity and arene-binding ability, are promising materials for molecular sensing and tunable luminescence.

Vanga, Mukundam [University of Texas, Arlington, T↗
DOE OSTI2020

Resolving Enhanced Mn 2+ Luminescence near the Surface of CsPbCl 3 with Time-Resolved Cathodoluminescence Imaging

Mn 2+ doping of lead halide perovskites has garnered recent interest because it produces stable orange luminescence in tandem with perovskite emission. In this work, we observe enhanced Mn 2+ luminescence at the edges of Mn 2+ -doped CsPbCl 3 perovskite microplates and suggest an explanation for its origin using the high spatiotemporal resolution of time-resolved cathodoluminescence (TRCL) imaging. We reveal two luminescent decay components that we attribute to two different Mn 2+ populations. While each component appears to be present both near the surface and in the bulk, the origin of the intensity variation stems from a higher proportion of the longer lifetime component near the perovskite surface. Overall, we suggest that this higher emission is caused by an increased probability of electron-hole recombination on Mn 2+ near the perovskite surface due to an increased trap concentration there. This observation suggests that such surface features have yet untapped potential to enhance emissive properties via control of surface-to-volume ratio.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Aging of Self-Assembled Lead Halide Perovskite Nanocrystal Superlattices: Effects on Photoluminescence and Energy Transfer

Excitonic coupling, electronic coupling, and cooperative interactions in self-assembled lead halide perovskite nanocrystals were reported to give rise to a red-shifted collective emission peak with accelerated dynamics. Here we report that similar spectroscopic features could appear as a result of the nanocrystal reactivity within the self-assembled superlattices. This is demonstrated by studying CsPbBr 3 nanocrystal superlattices over time with room-temperature and cryogenic micro-photoluminescence spectroscopy, X-ray diffraction, and electron microscopy. It is shown that a gradual contraction of the superlattices and subsequent coalescence of the nanocrystals occurs over several days of keeping such structures under vacuum. As a result, a narrow, low-energy emission peak is observed at 4 K with a concomitant shortening of the photoluminescence lifetime due to the energy transfer between nanocrystals. When exposed to air, self-assembled CsPbBr 3 nanocrystals develop bulk-like CsPbBr 3 particles on top of the superlattices. At 4 K, these particles produce a distribution of narrow, low-energy emission peaks with short lifetimes and excitation fluence-dependent, oscillatory decays. Overall, the aging of CsPbBr 3 nanocrystal assemblies dramatically alters their emission properties and that should not be overlooked when studying collective optoelectronic phenomena nor confused with superfluorescence effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ligand Desorption and Fragmentation in Oleate-Capped CdSe Nanocrystals under High-Intensity Photoexcitation

Semiconductor nanocrystals (NCs) offer prospective use as active optical elements in photovoltaics, light-emitting diodes, lasers, and photocatalysts due to their tunable optical absorption and emission properties, high stability, and scalable solution processing, as well as compatibility with additive manufacturing routes. Over the course of experiments, during device fabrication, or while in use commercially, these materials are often subjected to intense or prolonged electronic excitation and high carrier densities. The influence of such conditions on ligand integrity and binding remains underexplored. Here, in this study, we expose CdSe NCs to laser excitation and monitor changes in oleate that is covalently attached to the NC surface using nuclear magnetic resonance as a function of time and laser intensity. Higher photon doses cause increased rates of ligand loss from the particles, with upward of 50% total ligand desorption measured for the longest, most intense excitation. Surprisingly, for a range of excitation intensities, fragmentation of the oleate is detected and occurs concomitantly with formation of aldehydes, terminal alkenes, H 2 , and water. After illumination, NC size, shape, and bandgap remain constant although low-energy absorption features (Urbach tails) develop in some samples, indicating formation of substantial trap states. The observed reaction chemistry, which here occurs with low photon to chemical conversion efficiency, suggests that ligand reactivity may require examination for improved NC dispersion stability but can also be manipulated to yield desired photocatalytically accessed chemical species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electron Sextets as Optically Addressable Molecular Qubits: Triplet Carbenes

There is a growing demand in quantum information science and sensing for electron spin purification and readout via a spin-optical interface. This technique, known as optically detected magnetic resonance (ODMR), has been applied to diamond-NV centers and transition-metal complexes. Metal-free counterparts of these optically addressable spin qubits promise to be cheaper, more sustainable color centers with prolonged polarization lifetimes. However, progress has been hindered by the low ODMR signals of carbon-based π-diradicals, partly due to the lack of a ground singlet-to-triplet intersystem crossing (ISC). In this work, we propose exploring organic systems that are even more electron-deficient: electron sextets. Using triplet carbenes as an example, we illustrate how the ground singlet-triplet gap can be widened beyond thermal energy with the associated singlet-to-triplet ISC made available by vibronic effects. Through careful molecular engineering, this ISC can occur at a rate similar to and with an opposite spin selectivity from the excited-state ISC well-established in π-diradicals, unlocking a new ODMR pathway with potential signal gains. Persistent triplet carbenes are a renascent field, with multiple stable molecules being isolated in the past five years. To motivate further development of its emissive properties, we illustrate our design in three realistic carbene candidates that incorporate existing strategies for carbene stabilization. Furthermore, we believe that a new realm of quantum materials can be uncovered by expanding our scope toward stable electron sextets.

Carbene compounds↗
DOE OSTI2024

Charge state-dependent symmetry breaking of atomic defects in transition metal dichalcogenides

Abstract The functionality of atomic quantum emitters is intrinsically linked to their host lattice coordination. Structural distortions that spontaneously break the lattice symmetry strongly impact their optical emission properties and spin-photon interface. Here we report on the direct imaging of charge state-dependent symmetry breaking of two prototypical atomic quantum emitters in mono- and bilayer MoS 2 by scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM). By changing the built-in substrate chemical potential, different charge states of sulfur vacancies (Vac S ) and substitutional rhenium dopants (Re Mo ) can be stabilized. $${\mathrm{Vac}}_{{{{{{{{\rm{S}}}}}}}}}^{-1}$$ Vac S − 1 as well as $${{\mathrm{Re}}}_{{{{{{{{\rm{Mo}}}}}}}}}^{0}$$ Re Mo 0 and $${\mathrm{Re}}_{{\rm{Mo}}}^{-1}$$ Re Mo − 1 exhibit local lattice distortions and symmetry-broken defect orbitals attributed to a Jahn-Teller effect (JTE) and pseudo-JTE, respectively. By mapping the electronic and geometric structure of single point defects, we disentangle the effects of spatial averaging, charge multistability, configurational dynamics, and external perturbations that often mask the presence of local symmetry breaking.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Programmable quantum emitter formation in silicon

Abstract Silicon-based quantum emitters are candidates for large-scale qubit integration due to their single-photon emission properties and potential for spin-photon interfaces with long spin coherence times. Here, we demonstrate local writing and erasing of selected light-emitting defects using femtosecond laser pulses in combination with hydrogen-based defect activation and passivation at a single center level. By choosing forming gas (N 2 /H 2 ) during thermal annealing of carbon-implanted silicon, we can select the formation of a series of hydrogen and carbon-related quantum emitters, including T and C i centers while passivating the more common G-centers. The C i center is a telecom S-band emitter with promising optical and spin properties that consists of a single interstitial carbon atom in the silicon lattice. Density functional theory calculations show that the C i center brightness is enhanced by several orders of magnitude in the presence of hydrogen. Fs-laser pulses locally affect the passivation or activation of quantum emitters with hydrogen for programmable formation of selected quantum emitters.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Brush-modified fluorescent organic nanoparticles by ATRP with rigidity-regulated emission

Organic nanoparticles provide exceptional intraparticle tailorability, enabling the incorporation of functional molecules for diverse applications. In this study, we present the synthesis and characterization of fluorescent organic nanoparticles (FoNPs) with encapsulated aggregation-induced emission (AIE) luminogens with emission properties regulated by particle rigidity. Atom transfer radical polymerization (ATRP) was employed in dispersed media to develop various fluorescence colors tuned by precise control over particle rigidity. Comprehensive analyses revealed that increased particle rigidity significantly enhanced photoluminescence, achieving quantum yields of up to 22% in selected solvents. The high chain-end fidelity facilitated the grafting of hydrophilic polymer brushes from surfaces of FoNPs used as macroinitiators, enabling their dispersion in aqueous media while maintaining bright fluorescence. These findings highlight the potential of rigidity-regulated FoNPs as versatile platforms for advanced material applications, particularly in fluorescent waterborne films and aqueous-phase sensing systems.

Yin, Rongguan [Carnegie Mellon Univ., Pittsburgh, ↗
DOE OSTI2025

The persistent shadow of the supermassive black hole of M87. II. Model comparisons and theoretical interpretations

The Event Horizon Telescope (EHT) observation of M87∗ in 2018 has revealed a ring with a diameter that is consistent with the 2017 observation. The brightest part of the ring is shifted to the southwest from the southeast. In this paper, we provide theoretical interpretations for the multi-epoch EHT observations for M87∗ by comparing a new general relativistic magnetohydrodynamics model image library with the EHT observations for M87∗ in both 2017 and 2018. The model images include aligned and tilted accretion with parameterized thermal and nonthermal synchrotron emission properties. The 2018 observation again shows that the spin vector of the M87∗ supermassive black hole is pointed away from Earth. A shift of the brightest part of the ring during the multi-epoch observations can naturally be explained by the turbulent nature of black hole accretion, which is supported by the fact that the more turbulent retrograde models can explain the multi-epoch observations better than the prograde models. The EHT data are inconsistent with the tilted models in our model image library. Assuming that the black hole spin axis and its large-scale jet direction are roughly aligned, we expect the brightest part of the ring to be most commonly observed 90 deg clockwise from the forward jet. This prediction can be statistically tested through future observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

A portable X-pinch design for x-ray diagnostics of warm dense matter

We describe the design and x-ray emission properties (temporal, spatial, and spectral) of Dry Pinch I, a portable X-pinch driver developed at Imperial College London. Dry Pinch I is a direct capacitor discharge device, 300 × 300 × 700 mm3 in size and ∼50 kg in mass, that can be used as an external driver for x-ray diagnostics in high-energy-density physics experiments. Among key findings, the device is shown to reliably produce 1.1 ± 0.3 ns long x-ray bursts that couple ∼50 mJ of energy into photon energies from 1 to 10 keV. The average shot-to-shot jitter of these bursts is found to be 10 ± 4.6 ns using a combination of x-ray and current diagnostics. The spatial extent of the x-ray hot spot from which the radiation emanates agrees with previously published results for X-pinches—suggesting a spot size of 10 ± 6 µm in the soft energy region (1–10 keV) and 190 ± 100 µm in the hard energy region (>10 keV). These characteristics mean that Dry Pinch I is ideally suited for use as a probe in experiments driven in the laboratory or at external facilities when more conventional sources of probing radiation are not available. At the same time, this is also the first detailed investigation of an X-pinch operating reliably at current rise rates of less than 1 kA/ns.

47 OTHER INSTRUMENTATION↗