Search NASA⌕ Search

SEARCH · Search NASA

Results for “ensemble data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Multifidelity validation of digital surrogates using variable-density turbulent mixing models

In this study, ensembles of experimental data are presented and utilized to compare and validate two models used in the simulation of variable-density (Atwood = 0.22), compressible turbulent mixing. Though models of this kind (Reynolds averaged NavierStokes and large-eddy simulations) have been validated extensively with more canonical flows in previous studies, here the present approach offers novelty in the complexity of the geometry, the ensemble-based validation, and the uniformity of the computational framework on which the models are tested. Moreover, all experimental and computational tasks were completed by the authors which has led to a tightly coupled experimental configuration with its “digital twin.” The experimental divergent-shock-tube facility and its data acquisition methods are described and replicated in simulation space. A 2D Euler model which neglects the turbulent mixing at the interface is optimized to experimental data using a Gaussian process. This model then serves as the basis for both the 2D RANS and 3D LES studies that make comparisons to the mixing-layer data from the experiment. A relatively simple RANS model is shown to produce good agreement with experimental data only at late flow development times. The LES ensembles generally show good agreement with experimental data but display sensitivity to the characterization of initial conditions. Resolution-dependent behavior is also observed for certain higher-order statistics of interest. Overall, the LES model successfully captures the effects of divergent geometry, compressibility, and combined nonlinear instabilities inherent to the problem. The successful prediction of mixing width and its growth rate highlight the existence of three distinct regimes in the development of the instability, each with similarities to previously studied instabilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A JOINT CHANDRA AND SWIFT VIEW OF THE 2015 X-RAY DUST-SCATTERING ECHO OF V404 CYGNI

We present a combined analysis of the Chandra and Swift observations of the 2015 X-ray echo of V404 Cygni. Using a stacking analysis, we identify eight separate rings in the echo. We reconstruct the soft X-ray light curve of the 2015 June outburst using the high-resolution Chandra images and cross-correlations of the radial intensity profiles, indicating that about 70% of the outburst fluence occurred during the bright flare at the end of the outburst on MJD 57199.8. By deconvolving the intensity profiles with the reconstructed outburst light curve, we show that the rings correspond to eight separate dust concentrations with precise distance determinations. We further show that the column density of the clouds varies significantly across the field of view, with the centroid of most of the clouds shifted toward the Galactic plane, relative to the position of V404 Cyg, invalidating the assumption of uniform cloud column typically made in attempts to constrain dust properties from light echoes. We present a new XSPEC spectral dust-scattering model that calculates the differential dust-scattering cross section for a range of commonly used dust distributions and compositions and use it to jointly fit the entire set of Swift echo data. We find that a standard Mathis–Rumpl–Nordsieck model provides an adequate fit to the ensemble of echo data. The fit is improved by allowing steeper dust distributions, and models with simple silicate and graphite grains are preferred over models with more complex composition.

79 ASTRONOMY AND ASTROPHYSICS↗

Penalized ensemble Kalman filters for high dimensional non-linear systems

The ensemble Kalman filter (EnKF) is a data assimilation technique that uses an ensemble of models, updated with data, to track the time evolution of a usually non-linear system. It does so by using an empirical approximation to the well-known Kalman filter. However, its performance can suffer when the ensemble size is smaller than the state space, as is often necessary for computationally burdensome models. This scenario means that the empirical estimate of the state covariance is not full rank and possibly quite noisy. To solve this problem in this high dimensional regime, we propose a computationally fast and easy to implement algorithm called the penalized ensemble Kalman filter (PEnKF). Under certain conditions, it can be theoretically proven that the PEnKF will be accurate (the estimation error will converge to zero) despite having fewer ensemble members than state dimensions. Further, as contrasted to localization methods, the proposed approach learns the covariance structure associated with the dynamical system. These theoretical results are supported with simulations of several non-linear and high dimensional systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Native glycosylated HIV-1 Env in silico ensemble

The computationally modeled datasets generated in this study, namely the natively glycosylated SOSIP Env and the uniform mannose-9 glycosylated SOSIP Env ensembles will be submitted as Mendeley dataset server as required by the journal publishers, for public availability. These include two sets of Protein Data Bank (PDB)ensembles of 1000 structures each. The files are in the standardized PDB format. Each of the constituent ensemble structures are separated by the ‘END’ tag within the files. Snapshots from the beginning and end of each data set are given here. The column descriptions are as follows: Col1 –ATOM tag; Col 2 –atom number; COL 3 –atom name; COL4 –residue name; COL 5 –chain identifier; COL 6 –residue number; COL. 7,8,9 –X,Y,Z coordinates of atom in 3Dspace; COL 10 –Occupancy Factor; COL 11 -Temperature factor; COL 12 –segment identifier; COL 13 –element symbol.

59 BASIC BIOLOGICAL SCIENCES↗

Improving Wind Predictions in the Marine Atmospheric Boundary Layer through Parameter Estimation in a Single-Column Model

A current barrier to greater deployment of offshore wind turbines is the poor quality of numerical weather prediction model wind and turbulence forecasts over open ocean. The bulk of development for atmospheric boundary layer (ABL) parameterization schemes has focused on land, partly due to a scarcity of observations over ocean. The 100-m FINO1 tower in the North Sea is one of the few sources worldwide of atmospheric profile observations from the sea surface to turbine hub height. These observations are crucial to developing a better understanding and modeling of physical processes in the marine ABL. In this study, we use the WRF single column model (SCM), coupled with an ensemble Kalman filter from the Data Assimilation Research Testbed (DART), to create 100-member ensembles at the FINO1 location. The goal of this study is to determine the extent to which model parameter estimation can improve offshore wind forecasts.

17 WIND ENERGY↗

Categorization of Computing Education Resources into the ACM Computing Classification System

The Ensemble Portal harvests resources from multiple heterogonous federated collections. Managing these dynamically increasing collections requires an automatic mechanism to categorize records in to corresponding topics. We propose an approach to use existing ACM DL metadata to build classifiers for harvested resources in the Ensemble project. We also present our experience on utilizing the Amazon Mechanical Turk platform to build ground truth training data sets from Ensemble collections.

99 GENERAL AND MISCELLANEOUS↗

Boosting efficiency and reducing graph reliance: Basis adaptation integration in Bayesian multi-fidelity networks

The computational cost of high-fidelity numerical models makes outer-loop analysis, which requires repeated interrogation of the model such as uncertainty quantification, computationally demanding. Multi-fidelity methods, which construct a surrogate model using data from an ensemble of models of varying cost and accuracy, can substantially reduce the cost of outer-loop analysis. However, these methods can be difficult to apply when the model ensemble does not admit a clear hierarchy a priori and the correlations between models are low. Consequently, in this paper, we present a multi-fidelity method that leverages dimension reduction to enhance the correlation between models, thereby reducing the amount of data needed to train a surrogate from an unordered ensemble of models. Our method utilizes basis adaptation to build low-dimensional polynomial chaos expansions of each model and employs Multi-fidelity Networks to encode the relationships among models. We show that the resulting method exhibit two notable advantages over its counterpart: (1) enhanced accuracy (both reduced bias and variance); and (2) reduced dependency on the graph structure encoding relationships among models. We demonstrate the approach on an analytical test problem and a challenging finite element model for a spent nuclear fuel. Our method produces a surrogate model that is significantly more accurate than either a single-fidelity surrogate or a multi-fidelity surrogate constructed without basis adaptation.

42 ENGINEERING↗

Using Ultrasound Image Augmentation and Ensemble Predictions to Prevent Machine-Learning Model Overfitting

Deep learning predictive models have the potential to simplify and automate medical imaging diagnostics by lowering the skill threshold for image interpretation. However, this requires predictive models that are generalized to handle subject variability as seen clinically. Here, we highlight methods to improve test accuracy of an image classifier model for shrapnel identification using tissue phantom image sets. Using a previously developed image classifier neural network—termed ShrapML—blind test accuracy was less than 70% and was variable depending on the training/test data setup, as determined by a leave one subject out (LOSO) holdout methodology. Introduction of affine transformations for image augmentation or MixUp methodologies to generate additional training sets improved model performance and overall accuracy improved to 75%. Further improvements were made by aggregating predictions across five LOSO holdouts. This was done by bagging confidences or predictions from all LOSOs or the top-3 LOSO confidence models for each image prediction. Top-3 LOSO confidence bagging performed best, with test accuracy improved to greater than 85% accuracy for two different blind tissue phantoms. This was confirmed by gradient-weighted class activation mapping to highlight that the image classifier was tracking shrapnel in the image sets. Overall, data augmentation and ensemble prediction approaches were suitable for creating more generalized predictive models for ultrasound image analysis, a critical step for real-time diagnostic deployment.

60 APPLIED LIFE SCIENCES↗

Communicating the Impacts of Projected Climate Change on Heavy Rainfall Using a Weighted Ensemble Approach

Urban flood risks are often determined by the frequency analysis of observed rainfall data, communicated using isohyetal maps showing rainfall totals for a range of durations and recurrence intervals. However, to assess future changes in heavy rainfall, it is necessary to study the future projected rainfall time series. Impacts of climate change are typically assessed using climate projections based on global climate model (GCM) outputs and downscaled to finer temporal and spatial scales. The projected data, however, are not generated in a format that urban planners and engineers can easily use to design for future conditions. This paper presents a method to analyze and express climate data in a format that can be readily used in hydrologic models to assess the effects of future extreme rainfall events. Future conditions’ climate data were analyzed using a weighted ensemble approach, which resulted in projected rainfall frequency estimates and their confidence limits. Two multimodel data sets were selected to illustrate this approach in Cook County, Illinois, which belongs to the Chicago metropolitan area. The first data set included statistical downscaling data based on the Intergovernmental Panel for Climate Change’s (IPCC) Coupled Model Intercomparison Project Phase 3 (CMIP3) data. The weighted ensemble analysis applied to this data set produced results that indicated significant increases in projected heavy rainfall. For example, for CMIP3 Scenario A2, for the late 21st century, the 100-year, 24-h rainfall in the northern parts of the county was 29% larger than the model-generated rainfall for the present time. Finally, for the same time horizon and scenario, the confidence interval based on projected data was 87% wider compared with that of the published source (NOAA Atlas 14), calculated using the past observed data. Also, equal-weight delta-corrected IPCC CMIP5-based dynamical downscaling data were applied to the same region for the mid-21st century, producing increases in heavy rainfall fairly similar to those of CMIP3.

54 ENVIRONMENTAL SCIENCES↗

Optical–SZE scaling relations for DES optically selected clusters within the SPT-SZ Survey

We study the Sunyaev-Zel'dovich effect (SZE) signature in South Pole Telescope (SPT) data for an ensemble of 719 optically identified galaxy clusters selected from 124.6 deg$^2$ of the Dark Energy Survey (DES) science verification data, detecting a stacked SZE signal down to richness $\lambda\sim20$. The SZE signature is measured using matched-filtered maps of the 2500 deg$^2$ SPT-SZ survey at the positions of the DES clusters, and the degeneracy between SZE observable and matched-filter size is broken by adopting as priors SZE and optical mass-observable relations that are either calibrated using SPT selected clusters or through the Arnaud et al. (2010, A10) X-ray analysis. We measure the SPT signal to noise $\zeta$-$\lambda$, relation and two integrated Compton-$y$ $Y_\textrm{500}$-$\lambda$ relations for the DES-selected clusters and compare these to model expectations accounting for the SZE-optical center offset distribution. For clusters with $\lambda > 80$, the two SPT calibrated scaling relations are consistent with the measurements, while for the A10-calibrated relation the measured SZE signal is smaller by a factor of $0.61 \pm 0.12$ compared to the prediction. For clusters at $20 < \lambda < 80$, the measured SZE signal is smaller by a factor of $\sim$0.20-0.80 (between 2.3 and 10~$\sigma$ significance) compared to the prediction, with the SPT calibrated scaling relations and larger $\lambda$ clusters showing generally better agreement. We quantify the required corrections to achieve consistency, showing that there is a richness dependent bias that can be explained by some combination of contamination of the observables and biases in the estimated masses. We discuss possible physical effects, as contamination from line-of-sight projections or from point sources, larger offsets in the SZE-optical centering or larger scatter in the $\lambda$-mass relation at lower richnesses.

79 ASTRONOMY AND ASTROPHYSICS↗

Selecting a Classification Ensemble and Detecting Process Drift in an Evolving Data Stream

We characterize the commercial behavior of a group of companies in a common line of business using a small ensemble of classifiers on a stream of records containing commercial activity information. This approach is able to effectively find a subset of classifiers that can be used to predict company labels with reasonable accuracy. Performance of the ensemble, its error rate under stable conditions, can be characterized using an exponentially weighted moving average (EWMA) statistic. The behavior of the EWMA statistic can be used to monitor a record stream from the commercial network and determine when significant changes have occurred. Results indicate that larger classification ensembles may not necessarily be optimal, pointing to the need to search the combinatorial classifier space in a systematic way. Results also show that current and past performance of an ensemble can be used to detect when statistically significant changes in the activity of the network have occurred. The dataset used in this work contains tens of thousands of high level commercial activity records with continuous and categorical variables and hundreds of labels, making classification challenging.

Ensemble classifiers↗

Ensemble variational Fokker-Planck methods for data assimilation

Particle flow filters solve Bayesian inference problems by smoothly transforming a set of particles into samples from the posterior distribution. Particles move in state space under the flow of an McKean-Vlasov-Itˆo process. This work introduces the Variational Fokker-Planck (VFP) framework for data assimilation, a general approach that includes previously known particle flow filters as special cases. The McKean-Vlasov-Itˆo process that transforms particles is defined via an optimal drift that depends on the selected diffusion term. It is established that the underlying probability density - sampled by the ensemble of particles - converges to the Bayesian posterior probability density. For a finite number of particles the optimal drift contains a regularization term that nudges particles toward becoming independent random variables. Based on this analysis, we derive computationally-feasible approximate regularization approaches that penalize the mutual information between pairs of particles, and avoid particle collapse. Moreover, the diffusion plays a role akin to a particle rejuvenation approach that aims to alleviate particle collapse. The VFP framework is very flexible. Different assumptions on prior and intermediate probability distributions can be used to implement the optimal drift, and localization and covariance shrinkage can be applied to alleviate the curse of dimensionality. A robust implicit-explicit method is discussed for the efficient integration of stiff McKean- Vlasov-Itˆo processes. Here, the effectiveness of the VFP framework is demonstrated on three progressively more challenging test problems, namely the Lorenz ’63, Lorenz ’96 and the quasi-geostrophic equations.

97 MATHEMATICS AND COMPUTING↗

Systems and methods for modeling and analyzing networks

The systems and methods described herein utilize a probabilistic modeling framework for reverse engineering an ensemble of causal models, from data and then forward simulating the ensemble of models to analyze and predict the behavior of the network. In certain embodiments, the systems and methods described herein include data-driven techniques for developing causal models for biological networks. Causal network models include computational representations of the causal relationships between independent variables such as a compound of interest and dependent variables such as measured DNA alterations, changes in mRNA, protein, and metabolites to phenotypic readouts of efficacy and toxicity.

97 MATHEMATICS AND COMPUTING↗

MFNets: Multifidelity data-driven networks for Bayesian learning and prediction

This paper presents a multifidelity uncertainty quantification framework called MFNets. We seek to address three existing challenges that arise when experimental and simulation data from different sources are used to enhance statistical estimation and prediction with quantified uncertainty. Specifically, we demonstrate that MFNets can (1) fuse heterogeneous data sources arising from simulations with different parameterizations, e.g simulation models with different uncertain parameters or data sets collected under different environmental conditions; (2) encode known relationships among data sources to reduce data requirements; and (3) improve the robustness of existing multi-fidelity approaches to corrupted data. MFNets construct a network of latent variables (LVs) to facilitate the fusion of data from an ensemble of sources of varying credibility and cost. These LVs are posited as explanatory variables that provide the source of correlation in the observed data. Furthermore, MFNets provide a way to encode prior physical knowledge to enable efficient estimation of statistics and/or construction of surrogates via conditional independence relations on the LVs. We highlight the utility of our framework with a number of theoretical results which assess the quality of the posterior mean as a frequentist estimator and compare it to standard sampling approaches that use single fidelity, multilevel, and control variate Monte Carlo estimators. We also use the proposed framework to derive the Monte Carlo-based control variate estimator entirely from the use of Bayes rule and linear-Gaussian models -- to our knowledge the first such derivation. Finally, we demonstrate the ability to work with different uncertain parameters across different models.

97 MATHEMATICS AND COMPUTING↗

THE CONTRIBUTION OF RADIO GALAXY CONTAMINATION TO MEASUREMENTS OF THE SUNYAEV-ZEL'DOVICH DECREMENT IN MASSIVE GALAXY CLUSTERS AT 140 GHz WITH BOLOCAM

We describe in detail our characterization of the compact radio source population in 140 GHz Bolocam observations of a set of 45 massive galaxy clusters. We use a combination of 1.4 and 30 GHz data to select a total of 28 probable cluster-member radio galaxies and also to predict their 140 GHz flux densities. All of these galaxies are steep-spectrum radio sources and they are found preferentially in the cool-core clusters within our sample. In particular, 11 of the 12 brightest cluster-member radio sources are associated with cool-core systems. Although none of the individual galaxies are robustly detected in the Bolocam data, the ensemble-average flux density at 140 GHz is consistent with, but slightly lower than, the extrapolation from lower frequencies assuming a constant spectral index. In addition, our data indicate an intrinsic scatter of {approx_equal} 30% around the power-law extrapolated flux densities at 140 GHz, although our data do not tightly constrain this scatter. For our cluster sample, which is composed of high-mass and moderate-redshift systems, we find that the maximum fractional change in the Sunyaev-Zel'dovich signal integrated over any single cluster due to the presence of these radio sources is {approx_equal} 20%, and only {approx_equal} 1/4 of the clusters show a fractional change of more than 1%. The amount of contamination is strongly dependent on cluster morphology, and nearly all of the clusters with {>=}1% contamination are cool-core systems. This result indicates that radio contamination is not significant compared with current noise levels in 140 GHz images of massive clusters and is in good agreement with the level of radio contamination found in previous results based on lower frequency data or simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Applicability of Parallel Computing to Partial Wave Analysis

Bound states of Quantum Chromodynamics (QCD) give insights into the nature of confinement, a key element of the strong interaction. States may be identified from weak signals extracted from the analysis of high statistics data from reactions with many final state particles. One of the best tools for the analysis of these reactions is Partial Wave Analysis (PWA). PWA transforms an ensemble of experimental data from a large acceptance detector from free particle eigenstates to angular momentum eigenstates. The PWA program must be fast enough to deal with the large amounts of data available currently, as processing time scales with the number of events. The scope of this research is to study the applicability and scalability of Intel's Xeon Phi using the Many Integrated Core (MIC) architecture when applied to the existing PWA code at Jefferson Laboratory. An algorithm was developed for the Xeon Phi and scaled across 240 available threads, giving parallel functionality to the PWA which was originally written serially. This scaling can make the fitting process fifteen times faster.

Ruger, Justin↗

Statistical upscaling of ecosystem CO 2 fluxes across the terrestrial tundra and boreal domain: Regional patterns and uncertainties

Abstract The regional variability in tundra and boreal carbon dioxide (CO 2 ) fluxes can be high, complicating efforts to quantify sink‐source patterns across the entire region. Statistical models are increasingly used to predict (i.e., upscale) CO 2 fluxes across large spatial domains, but the reliability of different modeling techniques, each with different specifications and assumptions, has not been assessed in detail. Here, we compile eddy covariance and chamber measurements of annual and growing season CO 2 fluxes of gross primary productivity (GPP), ecosystem respiration (ER), and net ecosystem exchange (NEE) during 1990–2015 from 148 terrestrial high‐latitude (i.e., tundra and boreal) sites to analyze the spatial patterns and drivers of CO 2 fluxes and test the accuracy and uncertainty of different statistical models. CO 2 fluxes were upscaled at relatively high spatial resolution (1 km 2 ) across the high‐latitude region using five commonly used statistical models and their ensemble, that is, the median of all five models, using climatic, vegetation, and soil predictors. We found the performance of machine learning and ensemble predictions to outperform traditional regression methods. We also found the predictive performance of NEE‐focused models to be low, relative to models predicting GPP and ER. Our data compilation and ensemble predictions showed that CO 2 sink strength was larger in the boreal biome (observed and predicted average annual NEE −46 and −29 g C m −2 yr −1 , respectively) compared to tundra (average annual NEE +10 and −2 g C m −2 yr −1 ). This pattern was associated with large spatial variability, reflecting local heterogeneity in soil organic carbon stocks, climate, and vegetation productivity. The terrestrial ecosystem CO 2 budget, estimated using the annual NEE ensemble prediction, suggests the high‐latitude region was on average an annual CO 2 sink during 1990–2015, although uncertainty remains high.

Virkkala, Anna‐Maria↗

Machine learning framework for assessment of microbial factory performance

Metabolic models can estimate intrinsic product yields for microbial factories, but such frameworks struggle to predict cell performance (including product titer or rate) under suboptimal metabolism and complex bioprocess conditions. On the other hand, machine learning, complementary to metabolic modeling necessitates large amounts of data. Building such a database for metabolic engineering designs requires significant manpower and is prone to human errors and bias. We propose an approach to integrate data-driven methods with genome scale metabolic model for assessment of microbial bio-production (yield, titer and rate). Using engineered E. coli as an example, we manually extracted and curated a data set comprising about 1200 experimentally realized cell factories from ~100 papers. We furthermore augmented the key design features (e.g., genetic modifications and bioprocess variables) extracted from literature with additional features derived from running the genome-scale metabolic model iML1515 simulations with constraints that match the experimental data. Then, data augmentation and ensemble learning (e.g., support vector machines, gradient boosted trees, and neural networks in a stacked regressor model) are employed to alleviate the challenges of sparse, non-standardized, and incomplete data sets, while multiple correspondence analysis/principal component analysis are used to rank influential factors on bio-production. The hybrid framework demonstrates a reasonably high cross-validation accuracy for prediction of E.coli factory performance metrics under presumed bioprocess and pathway conditions (Pearson correlation coefficients between 0.8 and 0.93 on new data not seen by the model).

59 BASIC BIOLOGICAL SCIENCES↗