Search NASA⌕ Search

SEARCH · Search NASA

Results for “ethylene selectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Why Boron Nitride is such a Selective Catalyst for the Oxidative Dehydrogenation of Propane

Boron–containing materials, and in particular boron nitride, have recently been identified as highly selective catalysts for the oxidative dehydrogenation of alkanes such as propane. To date, no mechanism exists that can explain both the unprecedented selectivity, the observed surface oxyfunctionalization, and the peculiar kinetic features of this reaction. Here, we combine catalytic activity measurements with quantum chemical calculations to put forward a bold new hypothesis. We argue that the remarkable product distribution can be rationalized by a combination of surface–mediated formation of radicals over metastable sites, and their sequential propagation in the gas phase. Based on known radical propagation steps, we quantitatively describe the oxygen pressure–dependent relative formation of the main product propylene and by–product ethylene. Free radical intermediates most likely differentiate this catalytic system from less selective vanadium–based catalysts.

03 NATURAL GAS↗
DOE OSTI2020

Critical Hydrogen Coverage Effect on the Hydrogenation of Ethylene Catalyzed by δ-MoC(001): An Ab Initio Thermodynamic and Kinetic Study

Highly selective oxidation of methane to methanol has long been challenging in catalysis. Here, we reveal key steps for the promotion by water when tuning the selectivity of a well-defined CeO 2 /Cu 2 O/Cu(111) catalyst from CO and CO 2 to methanol under a reaction environment with methane, oxygen, and water. Ambient-pressure x-ray photoelectron spectroscopy showed that water added to CH 4 and O 2 led to surface CH 3 O and accelerated methanol production. These results were consistent with density functional theory calculations and kinetic Monte Carlo simulations which showed that water preferentially dissociates over the active Ce ions at the CeO 2 -Cu 2 O/Cu(111) interface. The adsorbed OH blocked O-O bond cleavage that would dehydrogenate CH 3 O to CO and CO 2 , and it directly converted this species to methanol, while O 2 now reoxidized the reduced surface. Water adsorption also displaced the produced methanol into the gas phase.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Importance of Site Diversity and Connectivity in Electrochemical CO Reduction on Cu

Electrochemical CO 2 reduction on Cu is a promising approach to produce value-added chemicals using renewable feedstocks, yet various Cu preparations have led to differences in activity and selectivity toward single and multicarbon products. Here, we find, surprisingly, that the effective catalytic activity toward ethylene improves when there is a larger fraction of less active sites acting as reservoirs of *CO on the surface of Cu nanoparticle electrocatalysts. In an adaptation of chemical transient kinetics to electrocatalysis, we measure the dynamic response of a gas diffusion electrode (GDE) cell when the feed gas is abruptly switched between Ar (inert) and CO. When switching from Ar to CO, CO reduction (COR) begins promptly, but when switching from CO to Ar, COR can be maintained for several seconds (delay time) despite the absence of the CO reactant in the gas phase. A three-site microkinetic model captures the observed dynamic behavior and shows that Cu catalysts exhibiting delay times have a less active *CO reservoir that exhibits fast diffusion to active sites. The observed delay times and the estimated *CO reservoir sizes are affected by catalyst preparation, applied potential, and microenvironment (electrolyte cation identity, electrolyte pH, and CO partial pressure). Notably, we estimate that the *CO reservoir surface coverage can be as high as 88 ± 7% on oxide-derived Cu (OD-Cu) at high overpotentials (–1.52 V vs SHE) and this increases in reservoir coverage coincide with increased turnover frequencies to ethylene. We also estimate that *CO can travel substantial distances (up to 10s of nm) prior to desorption or reaction. It appears that active C–C coupling sites by themselves do not control selectivity to C 2+ products in electrochemical COR; the supply of CO to those sites is also a crucial factor. More generally, the overall activity of Cu electrocatalysts cannot be approximated from linear combinations of individual site activities. Future designs must consider the diversity of the catalyst network and account for intersite transportation pathways.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Enhanced Selectivity for C 2 H 4 Production from C 2 H 6 on Partially Chlorinated IrO 2 (110) Surfaces

Modifying metal oxide surfaces to limit their oxidizing activity can provide a means of improving catalytic selectivity toward the partial oxidation of light alkanes. Here, in this study, we investigated the oxidation of C 2 H 6 on Cl-modified IrO 2 (110) surfaces using temperature-programmed reaction spectroscopy (TPRS) and first-principles microkinetic modeling. We find that substituting Cl for O in the IrO 2 (110) surface enhances the selectivity for C 2 H 6 conversion to C 2 H 4 during TPRS by suppressing extensive oxidation to CO x products, while also either enhancing C 2 H 4 production or altering it to a lesser extent, depending on the initial C 2 H 6 coverage. The C 2 H 4 selectivity increased with increasing C 2 H 6 and Cl coverage, but reached a limiting value below 50%. The Cl coverage changed negligibly during C 2 H 6 oxidation, and the surface reactivity decreased only marginally for Cl coverages up to 0.5 ML (monolayer). TPRS simulations using a microkinetic model predict C 2 H 4 and CO x product yields as a function of the Cl coverage that agree closely with the experimental results. According to the simulations, C 2 H 6 conversion to C 2 H 4 occurs on Cl-IrO 2 (110) by the hydrogenation of C 2 H 3 * species adsorbed in blocked states, in which neighboring sites are occupied only by unreactive HO and Cl species. The microkinetic modeling shows that H-hopping away from surface HO groups provides a relatively efficient route for C 2 H 3 * to escape blocked configurations and dehydrogenate, and that this process can limit the C 2 H 4 selectivity on Cl-IrO 2 (110) under the conditions studied. Overall, our results demonstrate that Cl-substitution into IrO 2 (110) enhances the selectivity for C 2 H 4 production from C 2 H 6 and provides insights into the reaction mechanism that can guide strategies to further improve the C 2 H 4 selectivity.

IrO2↗
DOE OSTI2023

Controlling selectivity for dechlorination of poly(vinyl chloride) with (xantphos)RhCl

Reaction of poly(vinyl chloride) (PVC) with 5 equiv. of triethyl silane in THF, in the presence of in situ generated (xantphos)RhCl catalyst, results in partial reduction of PVC via hydrodechlorination to yield poly(vinyl chloride-co-ethylene). Increasing catalyst loading or using N,N-dimethylacetamide (DMA) as a solvent both diminished selectivity for hydrodechlorination, promoting competitive dehydrochlorination reactions. Reaction of PVC with 2 equiv. of sodium formate in THF in the presence of (xantphos)RhCl affords excellent selectivity for hydrodechlorination along with complete PVC dechlorination, yielding polyethylene-like polymers. Higher catalyst loadings were necessary to activate PVC towards reduction in this case. In contrast, reaction of PVC with 1 equiv. of NaH in DMA, in the presence of (xantphos)RhCl, exhibited good selectivity for dehydrochlorination, as well as much higher reaction rates. These results combined shed light on the interplay between critical reaction parameters that control PVC's mode of reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enhanced multi-carbon alcohol electroproduction from CO via modulated hydrogen adsorption

Multi-carbon alcohols such as ethanol are valued as fuels in view of their high energy density and ready transport. Unfortunately, the selectivity toward alcohols in CO 2 /CO electroreduction is diminished by ethylene production, especially when operating at high current densities (>100 mA cm –2 ). Here we report a metal doping approach to tune the adsorption of hydrogen at the copper surface and thereby promote alcohol production. Using density functional theory calculations, we screen a suite of transition metal dopants and find that incorporating Pd in Cu moderates hydrogen adsorption and assists the hydrogenation of C 2 intermediates, providing a means to favour alcohol production and suppress ethylene. We synthesize a Pd-doped Cu catalyst that achieves a Faradaic efficiency of 40% toward alcohols and a partial current density of 277 mA cm –2 from CO electroreduction. The activity exceeds that of prior reports by a factor of 2.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1985

Investigation of test methods, material properties and processes for solar cell encapsulants

The historical development of ethylene vinyl acetate (EVA) is presented, including the functional requirements, polymer selection, curing, stabilization, production and module processing. The construction and use of a new method for the accelerated aging of polymers is detailed. The method more closely resembles the conditions that may be encountered in actual module field exposure and additionally may permit service life to be predicted accurately. The use of hardboard as a low cost candidate substrate material is studied. The performance of surface antisoiling treatments useful for imparting a self cleaning property to modules is updated.

Willis, P. B.↗
DOE OSTI2025

Innovative Approach to Recycle Lithium‐Ion Battery Electrolytes via Sequential Chemical Processes

The rapid growth of electric vehicles (EV) has driven the widespread use of lithium-ion batteries (LIBs). This will result in a large amount of spent batteries that if not properly disposed will pose significant environmental damage, especially from the electrolyte. The electrolyte contains lithium hexafluorophosphate (LiPF 6 ), which when treated by either incineration or water washing can generate harmful F- and P-containing substances such as hydrofluoric acid (HF). In this study, an innovative two-step process is presented to separate and purify both the solvents and lithium salts from the spent electrolyte. Antisolvent assisted precipitation is used to selectively isolate LiPF 6 salt in the form of a complex with ethylene carbonate. Subsequent distillation then separates the volatile electrolyte solvents and antisolvent from each other effectively. In addition, a new process to further purify LiPF 6 from its ethylene carbonate (EC) complex is also presented. This electrolyte recycling method not only enables the recovery of the high-value LiPF 6 salt and the electrolyte solvents, but also paves the way for environmentally responsible and circular LIB recycling.

electrolyte↗
DOE OSTI2021

Effects of surface diffusion in electrocatalytic CO 2 reduction on Cu revealed by kinetic Monte Carlo simulations

We report Kinetic Monte Carlo (KMC) methods are frequently used for mechanistic studies of thermally driven heterogeneous catalysis systems but are underused for electrocatalysis. Here, we develop a lattice KMC approach for electrocatalytic CO 2 reduction. The work is motivated by a prior experimental report that performed electroreduction of a mixed feed of 12 CO 2 and 13 CO on Cu; differences in the 13 C content of C2 products ethylene and ethanol (Δ 13 C) were interpreted as evidence of site selectivity. The lattice KMC model considers the effect of surface diffusion on this system. In the limit of infinitely fast diffusion (mean-field approximation), the key intermediates 12 CO* and 13 CO* would be well mixed on the surface and no evidence of site selectivity could have been observed. Using a simple two-site model and adapting a previously reported microkinetic model, we assess the effects of diffusion on the relative isotope fractions in the products using the estimated surface diffusion rate of CO* from literature reports. We find that the size of the active sites and the total surface adsorbate coverage can have a large influence on the values of Δ 13 C that can be observed. Δ 13 C is less sensitive to the CO* diffusion rate as long as it is within the estimated range. We further offer possible methods to estimate surface distribution of intermediates and to predict intrinsic selectivity of active sites based on experimental observations. This work illustrates the importance of considering surface diffusion in the study of electrochemical CO 2 reduction to multi-carbon products. Our approach is entirely based on a freely available open-source code, so will be readily adaptable to other electrocatalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effects of the method of active site characterization for determining structure-sensitivity in Ag-catalyzed ethylene epoxidation

We report catalysts have been prepared on a low surface area α-Al 2 O 3 support used commercially for previous generation olefin epoxidation catalysts. Prescreening of the low surface area alumina (0.73 m 2 /g) indicated the absence of acid catalyzed isomerization of EO at an evaluation temperature of 210 °C. A 0.1 wt% Ag base material synthesized by incipient wetness impregnation of AgNO 3 was used as a base material for electroless deposition (ED) of additional Ag to increase particle sizes by controlled reduction of Ag + directly onto the preexisting Ag surface to form weight loadings between 0.3 and 5.0 wt% metal. A 12 wt% Ag/α-Al 2 O 3 using Ag 2 C 2 O 4 as the Ag precursor was also prepared to compare performance of the ED samples with a catalyst more typical of industrial formulations. Characterization by SEM, STEM, and hydrogen titration of oxygen precovered Ag characterized before and after catalytic evaluation indicated that microscopy is required to accurately represent distributions of Ag particle sizes, but H 2 titration of O-precovered Ag gives the best representation of active sites since it directly counts the number of Ag surface sites. Larger particles >100 nm are resistant to both Ag sintering and carbon foulant; TOF values were relatively insensitive to particle size with only a 2.2 × difference between the best and worst performing samples. Selectivity, which is not a function of TOF, shows the most significant structure sensitivity effect where particle sizes follow the trend 67 nm ≈ 92 nm (58% EO) < 157 nm (67% EO) < 211–542 nm (73% EO). The lower EO selectivities were also correlated with increased fouling for the smaller Ag sizes, suggesting that more strongly bound EO precursor(s) leads to combustion and CO 2 /H 2 O formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Surface vs Homogeneous Organo-Hafnium Catalyst Ion-Pairing and Ligand Effects on Ethylene Homo- and Copolymerizations

Heterogeneous catalysts have long dominated polyethylene and polypropylene production, but understanding their catalysis is challenged by uncertainties in active site structures and percentages. Surface-bound organometallic catalysts are an emerging strategy to combine successful homogeneous catalysts having well-understood structures, relatively high percentages of active sites, and exceptional control of selectivity, with the attractions of surface catalysts, to transition promising homogeneous systems to large-scale heterogeneous ones. Nevertheless, surface-bound olefin polymerization catalysts typically produce ultrahigh M w ’s but with low activity and comonomer selectivity. Here, we report the systematic synthesis and characterization of a series of pyridylamido–Hf complexes and their corresponding surface catalysts chemisorbed on sulfated alumina (AlS) and zirconia (ZrS). Comparative ethylene homo- and 1-octene copolymerizations reveal similar activity and 1-octene selectivity trends in the homogeneous and heterogeneous systems. For the surface pyridylamido–Hf catalyst series, large variations in activity (up to 10×) and 1-octene incorporation (up to 28×) are achieved by ligand and support manipulation. Interestingly, while the homogeneous catalysts exhibit positive comonomer effects in ethylene/1-octene copolymerization, the surface catalysts behave oppositely. Extended X-ray absorption fine structure (EXAFS) reveals significantly elongated Hf···O bond distances vs typical Hf–O covalent bonds (2.06 vs 1.97 Å). Furthermore, density functional theory (DFT) analysis of the heterolytic ion pair separation enthalpies, olefin insertion energetics, and NBO/Bader charges also suggest electrostatic Hf cation–anionic support binding and catalytic patterns, which are modulated by the ion-pairing energetics and ligand architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Insights into the Structure–Activity Relationships in Metal–Organic Framework-Supported Nickel Catalysts for Ethylene Hydrogenation

Solid supports play an indispensable role in heterogeneous catalysis, as they can directly affect the catalytic activity and selectivity of supported catalysts. However, the specific roles of such supports remain to be demystified owing to the difficulties in obtaining precise structural information on supported catalysts. To understand the effects of MOF topology, pore environment, and metal identity of node supports on the catalytic activity, a Ni catalyst was supported on eight Zr- or Hf-MOFs based on 8-connected nodes: namely M-NU-1200, M-NU-1000, M-NU-1008, and M-NU-1010 (M = Zr, Hf). Single-crystal X-ray diffraction (SCXRD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and X-ray photoelectron spectroscopy (XPS) were employed to characterize the supported catalyst structures. To investigate the support effects on their activities, the supported Ni catalysts were evaluated by using ethylene hydrogenation as a model reaction. The results revealed that all Hf-based-MOF-supported Ni catalysts exhibited higher catalytic reactivity with TOF (turnover frequency) values at least double of those isostructural Zr counterparts. Additionally, MOFs with less congested metal anchoring sites, as a result of the topology and surrounding pore environment, yielded higher TOFs, suggesting the importance of supports in dictating both the catalyst accessibility and activity. Computational analysis complemented the experimental observations and provided insights into reaction barrier differences and their performance variation. Furthermore, this study demonstrates the essential role of the supports and provides a thought for selecting/designing suitable supports in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Acetylene Semi-Hydrogenation on a Perovskite Oxyhydride Surface: Insights from First Principles and Microkinetic Modeling

Although perovskite oxyhydrides (POHs) have shown promise as a support for selective hydrogenation, it is unknown if they themselves can catalyze alkyne semi-hydrogenation. Here, we use first-principles density functional theory, coupled with microkinetic modeling, to investigate acetylene semi-hydrogenation on a prototypical POH, cubic BaTiO 2.5 H 0.5 (BTOH). Two different mechanisms are examined on a representative surface of BTOH under the reaction conditions: both are based on the Horiuti–Polanyi mechanism, but the way of H 2 dissociation is different. In mechanism 1, a lattice hydride H atom and then a surface adsorbed H atom sequentially hydrogenate the adsorbed acetylene. In mechanism 2, two lattice hydride H atoms from the BTOH sequentially hydrogenate the adsorbed acetylene. In both mechanisms, the H atoms are replenished from gas phase H 2 dissociation. Using density functional theory (DFT), we have calculated pathways for these two mechanisms in hydrogenation of acetylene to ethylene, as well as further to ethane. Microkinetic modeling based on the DFT energetics indicates that at 523 K, hydrogenation to ethylene and ethane via mechanism 1 occurs at a rate up to two orders of magnitude faster than via mechanism 2. A selectivity analysis for the temperature range of 373–673 K shows that the product observed is essentially only ethylene within the more active mechanism 1. This is because at the steady state, there is a significant amount of surface anion vacancies that facilitate heterolytic H 2 dissociation and help stabilize a vinyl intermediate. In conclusion, the present findings suggest that POHs are capable of selective hydrogenation, thanks to their rich hydrogen surface-redox chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Thin-film composite membranes based on hyperbranched poly(ethylene oxide) for CO 2 /N 2 separation

Cross-linked amorphous poly(ethylene oxide) (XLPEO) is one of the leading membrane materials for post-combustion CO 2 capture. For example, XLPEO prepared from poly(ethylene glycol) methyl ether acrylate (PEGMEA) exhibited CO 2 permeability of 570 Barrer and CO 2 /N 2 selectivity of 41 at 35 °C. However, these XLPEOs cannot be dissolved in coating solutions, making it impossible to be fabricated into thin-film composite (TFC) membranes using state-of-the-art manufacturing processes. In this study, we synthesized high molecular weight yet soluble HPEO via atom transfer radical polymerization (ATRP). These polymers were thoroughly characterized and compared with XLPEO, including thermal transitions, free volumes, and pure-gas sorption and permeation properties. A polymer with the best combination of CO 2 permeability (540 Barrer) and CO 2 /N 2 selectivity (43) was fabricated into defect-free TFC membranes with a thickness as thin as 506 ± 44 nm. When challenged with simulated flue gas containing water vapor at 35 °C for over 100 h, the membrane shows stable CO 2 permeance of 850 GPU and CO 2 /N 2 selectivity of 37, comparable to the leading commercial membranes for carbon capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tandem and Bimetallic Catalysts for Oxidative Dehydrogenation of Light Hydrocarbons with Renewable Feedstock

One of the grand challenges for national energy security is the establishment of sustainable chemical transformations. The chemical industry relies on naphtha feedstock from nonrenewable crude oil, and uses energy intense processes to make useful building block molecules such as ethylene through steam cracking, which generates significant greenhouse carbon dioxide emissions. Sustainable chemistry through selective catalysis should enable chemical transformations that use renewable feedstock such as nonfood biomass, minimize energy consumption, and do not emit greenhouse gases or other waste byproducts. In this research, we studied fundamental chemistry that couples the removal of oxygen atoms from nonfood biomass derived polyols and diols with oxidative dehydrogenation (ODH) of petroleum based alcohols. Heterobimetallic Re-Ir complexes were constructed and their reaction chemistry established. Typical substrates are glycerol, sugar alcohols and pentane to produce allyl alcohol, pentene, and water. The reaction mechanism of a recyclable rhenium nano-particle catalyst was established for deoxydehydration of sugar alcohols without the use of organic solvents.

09 BIOMASS FUELS↗
DOE OSTI2022

An Improved Pathway to Ethylene Glycol via CO 2

This report describes our efforts to develop a partial electrochemical oxidation process to produce formaldehyde selectively from methanol. The effort examined numerous potential anode materials in pursuit of 70% Faradaic efficiency for conversion of methanol to formaldehyde. Among the various electrode materials tested herein both Pt and PtRu were identified as the most promising catalysts in this process as the Faradaic efficiency obtained in these cases are 40% and >70% respectively. Several other 3d transition metals, Pt group metals and their alloys were also studied in which the Faradaic efficiency was obtained within 5-30%. In case of Pt and PtRu bulk metal electrode shows higher selectivity to formaldehyde compared to their nanostructured materials. Based on the literature, nanostructured Pt and PtRu are considered as active catalysts for methanol fuel cells, thus, lower selectivity to formaldehyde with nano Pt and PtRu in our case was attributed to their preferential oxidation of methanol to CO 2 . Severe catalyst deactivation was noted when 0.5 (M) sulfuric acid was used as the electrolyte irrespective of catalyst formulation. On the other hand, much higher activity and selectivity for formaldehyde was noted when alkaline electrolyte was employed during oxidation. Considering selective electrochemical oxidation of methanol to formaldehyde is an area which is underexplored as of today, our findings about catalyst formulation and process condition is noteworthy in this direction. Both bulk metal electrodes of Pt and PtRu may be cost prohibitive and thus present challenges to the scale up this technology. Therefore, we recognize that additional efforts are needed to develop catalysts with high activities and Faradaic efficiencies similar to bulk electrodes for the electrooxidation of methanol to formaldehyde.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reduction of carbon dioxide at a plasmonically active copper–silver cathode

Electrochemically deposited copper nanostructures were coated with silver to create a plasmonically active cathode for carbon dioxide (CO 2 ) reduction. Illumination with 365 nm light, close to the peak plasmon resonance of silver, selectively enhanced 5 of the 14 typically observed copper CO 2 reduction products while simultaneously suppressing hydrogen evolution. At low overpotentials, carbon monoxide was promoted in the light and at high overpotentials ethylene, methane, formate, and allyl alcohol were enhanced upon illumination; generally C 1 products and C 2 /C 3 products containing a double carbon bond were selectively promoted under illumination. Temperature-dependent product analysis in the dark showed that local heating is not the cause of these selectivity changes. Finally, while the exact plasmonic mechanism is still unknown, these results demonstrate the potential for enhancing CO 2 reduction selectivity at copper electrodes using plasmonics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tunable Metal–Organic Frameworks Based on 8-Connected Metal Trimers for High Ethane Uptake

Metal trimers [M 3 (O/OH)](OOCR) 6 are among the most important structural building blocks. From these trimers, a great success has been achieved in the design of 6- or 9-connected framework materials with various topological features and outstanding gas-sorption properties. In comparison, 8-connected trimer-based MOFs are rare. Given multiple competitive pathways for the formation of 6- or 9-connected frameworks, it remains challenging to identify synthetic or structural parameters that can be used to direct self-assembly process towards trimer-based 8-connected materials. Here, we reveal a viable strategy called angle bending modulation for creating a prototypical MOF type based on 8-connected M 3 (OH)(OOCR) 5 (Py-R) 3 trimers, M = Zn, Co, Fe). As a proof of concept, we synthesized six members in this family using three types of ligands (CPM-80, -81, and -82). These materials do not possess open-metal sites and show excellent uptake capacity for various hydrocarbon gas molecules and inverse C 2 H 6 /C 2 H 4 selectivity. CPM-81-Co, made from 2,5-furandicarboxylate and isonicotinate, features selectivity of 1.80 with high uptake capacity for ethane (123 cm 3 /g -1 ) and ethylene (113 cm 3 /g -1 ) at 298 K and 1 bar.

36 MATERIALS SCIENCE↗