Modified eutectic alloys for high temperature service Six month progress report
Eutectic alloys of cobalt and nickel modified by tungsten for use at high temperatures
TUNGSTEN↗
SEARCH · Search NASA
Results for “eutectic”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Investigation of the solidification, structure and properties of eutectic alloys including consideration of properties control Second semiannual progress report
Solidification, structure, and mechanical and physical properties of controlled eutectic alloys
PHYSICAL PROPERTY↗
Modification of eutectic alloys for high- temperature service.
Cobalt and nickel eutectic alloys modification with selected elements for high temperature application, noting microstructure and tensile behavior
EUTECTIC ALLOY↗
Investigation of the Solidification, Structure and Properties of Eutectic Alloys Including Consideration of Properties Control Semiannual Progress Report
Ambient temperature fatigue and fracture, elevated temperature, and physical property research on highly anisotropic binary eutectic alloys
PHYSICAL PROPERTY↗
Modified eutectic alloys for high temperature service Progress report
Control of modified eutectic cast alloys for high temperature service
HIGH TEMPERATURE ALLOY↗
The effect of thermal cycling on the structure and properties of a Co, Cr, Ni-TaC directionally solidified eutectic composite
A Co, Cr, Ni-TaC directionally solidified eutectic composite was subjected to thermal fatigue between 427-1093°C. The material suffered degradation in microstructure and elevated temperature mechanical properties. The loss in properties varied with the maximum cycling temperature and number of cycles. This behavior is attributed to the increasing solubility of the TaC in the matrix with temperature from 0.4% at room temperature to 2.2% at 1200°C. During the thermal cycling, the TaC is subjected to solution and reprecipitation which form serrations on the fibers since the easy growth planes of the TaC are not coincident with the fiber faces exposed to the matrix.
Composites↗
Experimental investigation of forced-convection heat-transfer characteristics of lead-bismuth eutectic
The forced-convection heat-transfer characteristics of lead-bismuth eutectic were experimentally investigated. Experimental values of Nusselt number for lead-bismuth fell considerably below predicted values. The addition of a wetting agent did not change the heat transfer characteristics.
METALS, LIQUID↗
(abstract) A Brief, Selective Review of Thermal Cycling Fatigue in Eutectic Tin-Lead Solder
This paper reviews selected parts of the current literature relevant to thermo-mechanical fatigue mechanisms in eutectic tin-lead solder, and suggests a general outline to account for some observed failures. The field is found to be complex. One recent experimental study finds some failure modes to be sensitive to joint geometry. Attempts to extrapolate from test environments to service environments have had only limited success. Much work remains to be done before fatigue failures in this material can be considered as under practical control.
environments↗
Phase Transitions of Eutectic High Entropy Alloy AlCoCrFeNi 2.1 Under Shock Compression
High entropy alloys (HEAs) are a new class of metals that exhibit unique mechanical performance. Among HEAs, additively manufactured eutectic high entropy alloys (AM EHEAs) have recently emerged as candidate materials for use in extreme conditions due to their simultaneous high strength and ductility. However, the deformation and structural evolution of AM EHEAs under conditions of high pressure have not been well characterized, limiting their use in extreme applications. Dynamic compression experiments and molecular dynamics simulations are presented to study the structural evolution of AM EHEA AlCoCrFeNi 2.1 when compressed to pressures up to 400 GPa. In situ X-ray diffraction measurements capture the appearance of face-centered cubic and body-centered cubic phases at different pressure conditions, with pure- and mixed-phase regions. Furthermore, understanding the phase stability and structural evolution of the AM EHEA offers new insights to guide the development of high-performance complex materials for extreme conditions.
36 MATERIALS SCIENCE↗
Thermodynamic Framework for Water in Deep Eutectic Solvents and Ionic Liquids
Water is widely recognized as critical to the tunability and electrochemical stability of nonaqueous solvents such as deep eutectic solvents (DESs) and ionic liquids (ILs). Traditionally, the water content of these solvents has been controlled by either drying or adding small amounts of water to control their bulk properties to meet specific application requirements. The total water content by itself, does not provide sufficient information about the chemical reactivity and molecular interactions within DES– and IL–water mixtures. In this concept article, water activity is highlighted as a thermodynamically more rigorous descriptor to quantify the influence of the co‐solvent water on DES– and IL–water mixtures. Water activity relates measurable physical properties, such as vapor pressure, density, viscosity, electrochemical stability, and conductivity of DESs and ILs to the underlying molecular interactions between their components. Furthermore, water activity of DESs and ILs correlates with changes in local solvent structures and thermodynamic excess properties, including excess molar volume, enthalpy, and Gibbs energy.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Tuning the Properties of Lignin‐Derived Deep Eutectic Solvents for Biomass Processing
Lignin-derived deep eutectic solvents (DESs) have been investigated as sustainable green media for biomass processing. However, the properties and processability of DESs have not been fully understood with the chemical structures of their constituents for biomass fractionation. Here, in this article, the properties of the phenolic DESs are discussed with different numbers of functional groups, such as –OCH 3 and –CHO in their hydrogen bond donor (HBD) structures. The formation of DES is significantly related to the hydrogen bond between its constituents, identified by nuclear magnetic resonance (NMR) analysis and density functional theory calculation (DFT). Lower viscosity and net basicity of DES are achieved with fewer –OCH 3 on HBD structures, resulting in enhanced processability and fractionation efficiency. The thermal stability of the DES is also influenced by the –OCH 3 and –CHO of HBD, as indicated by its onset temperature. The recyclability of the phenolic DES is confirmed by the fractionation performance of the recycled DES. Understanding the structural impacts of DES constituents on the properties and performance is crucial for designing solvents in biorefinery applications.
Ryu, Jiae [State University of New York (SUNY), Sy↗
Eutectic melting of alloy microparticles upon low velocity impact
Although impact melting has been quantified in a number of pure metals, alloyed microparticles have access to low melting-point eutectics that can promote earlier melting. Through real-time monitoring of single particle impacts resolved at the nanosecond- and micron-scales, we explore the impact melting of AA7075 from high velocities, where it is abundant and clear, to velocities as low as ∼269 m/s. Here, by using a hard substrate to isolate the deformation largely to the particle, we show that the adiabatic heat produced by the plasticity of the impact can explain the onset of melting at low velocity.
Additive manufacturing↗
Scanning Electrochemical Microscopy for Kinetic Investigations in Viscous Deep Eutectic Solvents: Identifying Practical Approach Curves and Deviations from Electron Transfer Models
Determining heterogeneous electrochemical electron transfer (ET) kinetics in electrolytes with a wide range of physical properties is of great interest for achieving high-performance redox flow batteries. Among such electrolytes, concentrated hydrogen-bonded electrolytes (CoHBEs), including deep eutectic solvents (DESs), have recently garnered significant attention. Unfortunately, traditional Tafel analysis using macroelectrodes often encounters issues with mass transfer limitations in CoHBEs with high viscosities, thereby restricting kinetic analysis to a narrow potential window. Here, in this work, we introduce a methodology for evaluating ET kinetics in viscous DES using the scanning electrochemical microscopy (SECM). We first determined practical solutions to SECM tip positioning in ethaline DES, which yield pseudopositive feedback responses. Lattice Boltzmann method (LBM) simulations helped us rationalize the impact of the fluid and concentration fields, as well as tip geometry, tip approach velocity v, and the solvent viscosity ηs, on the shape of the approach curves. In addition to successfully recreating approach curves over a variety of conditions, we found that approaching a conductor ensured a practical point where the normalized tip response (Ni T = 2) converged at L = 0.7 within ∼10% error regardless of tip velocity. With positioning capabilities at hand, we investigated the kinetics of Fe 3+ /Fe 2+ redox couple in aqueous and the ethaline media. The experimental kinetic results were interpreted using the Butler–Volmer (BV) and Marcus–Hush–Chidsey (MHC) models. For ethaline, a nonideal kinetic behavior was observed, potentially attributed to solvent dynamics within DESs or to the interplay of chloride anions in the charge transfer process.
electrodes↗
Deep Eutectic Solvents for Pretreatment of Lignocellulose Biomass: Physical Properties, Solubility Mechanisms, and Their Interactions
As the most accessible and abundant renewable resource on earth, lignocellulosic biomass mainly consists of cellulose, hemicelluloses, and lignin with a small amount of protein, pectin, minerals, and extractives (e.g., tannins, lipids, and resins). Lignocellulosic biomass has gained extensive attention in industry and research owing to its renewability, availability, and low cost. However, achieving efficient fractionation of lignocellulose components and all-component utilization in a green and cost-effective manner remains a challenge dueto biomass recalcitrance. Deep eutectic solvents (DESs) have received considerable attention because they are biocompatible, inexpensive, biodegradable, have low toxicity, and are easy to prepare and recycle; these characteristics strongly depend on individual components involved in DESs preparation. This review systematically summarizes recent progress in the fractionation of carbohydrates (cellulose and hemicelluloses) and lignin from biomass using DESs, with particular emphasis on the effects of DES types and pretreatment parameters on fractionation efficiency. The subsequent conversion and upgrading of the DES-fractionated products (i.e., carbohydrates and lignin) are comprehensively analyzed. Finally, the challenges and future prospects of lignocellulose biomass fractionation using DESs are proposed in view of the existing limitations. This review provides an in-depth understanding of lignocellulose biomass fractionation during DESs processing, offering insights to improve current pretreatment methods and/or to explore new pretreatment methods aimed at mitigating the global energy crisis.
Mqoni, Ntebogeng [North-West University (Mafikeng ↗
Impacts of Hydrogen Bond Donor Structures in Phenolic Aldehyde Deep Eutectic Solvents on Pretreatment Efficiency
As a green solvent for biomass processing, deep eutectic solvents (DESs) have shown effectiveness in biomass processing. Here, in this study, phenolic aldehydes with different numbers of methoxy groups, including 4-hydroxybenzaldehyde (HBA, no methoxy), vanillin (VA, monomethoxy), and syringaldehyde (SA, dimethoxy) were employed to synthesize DESs with choline chloride (ChCl). The presence of methoxy groups in the hydrogen bond donor structure affected DES properties, as well as biomass pretreatment performance. The high thermal stability of phenolic aldehyde DESs was shown with over 225 °C onset temperature. The hydrogen bond donor with one aldehyde and one hydroxyl group at the para position without a methoxy group (ChCl-HBA) showed the highest xylan removal and delignification, reaching 59.3 and 88.0%, respectively, leading to the highest enzymatic hydrolysis yield. Sonication after pretreatment further enhanced the hydrolysis yields, achieving 83.3% glucan conversion and 50.1% xylan conversion. In the lignin-rich fraction, the recovered lignin showed a low weight–average molecular weight under 2100 g/mol with a relatively uniform molecular weight dispersity below 1.5. This study provides insights into how the chemical structure of hydrogen bond donors in DESs affects biomass processing and paves the way for designing effective lignin-derived DES in future biorefinery processes.
09 BIOMASS FUELS↗
Role of Intermolecular Interactions in Deep Eutectic Solvents for CO 2 Capture: Vibrational Spectroscopy and Quantum Chemical Studies
Recent research and reviews on CO 2 capture methods, along with advancements in industry, have highlighted high costs and energy-intensive nature as the primary limitations of conventional direct air capture and storage (DACS) methods. In response to these challenges, deep eutectic solvents (DESs) have emerged as promising absorbents due to their scalability, selectivity, and lower environmental impact compared to other absorbents. However, the molecular origins of their enhanced thermal stability and selectivity for DAC applications have not been explored before. Therefore, the current study focuses on a comprehensive investigation into the molecular interactions within an alkaline DES composed of potassium hydroxide (KOH) and ethylene glycol (EG). Combining Fourier transform infrared (FT-IR) and quantum chemical calculations, the study reports structural changes and intermolecular interactions induced in EG upon addition of KOH and its implications on CO 2 capture. Experimental and computational spectroscopic studies confirm the presence of noncovalent interactions (hydrogen bonds) within both EG and the KOH-EG system and point to the aggregation of ions at higher KOH concentrations. Additionally, molecular electrostatic potential (MESP) surface analysis, natural bond orbital (NBO) analysis, quantum theory of atoms-in-molecules (QTAIM) analysis, and reduced density gradient-noncovalent interaction (RDG-NCI) plot analysis elucidate changes in polarizability, charge distribution, hydrogen bond types, noncovalent interactions, and interaction strengths, respectively. Evaluation of explicit and hybrid models assesses their effectiveness in representing intermolecular interactions. This research enhances our understanding of molecular interactions in the KOH-EG system, which are essential for both the absorption and desorption of CO 2 . The study also aids in predicting and selecting DES components, optimizing their ratios with salts, and fine-tuning the properties of similar solvents and salts for enhanced CO 2 capture efficiency.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Structural and Dynamic Heterogeneity of Deep Eutectic Solvents Composed of Choline Chloride and Ortho-Phenol Derivatives
Structural, thermal, and dynamic properties of four deep eutectic solvents comprising choline chloride paired with ortho-phenolic derivative hydrogen-bond donors were probed using experiments and molecular simulations. The hydrogen-bond donors include phenol, catechol, o-chlorophenol, and o-cresol, in a 3:1 mixture with the hydrogen-bond acceptor choline chloride. Density, viscosity, and pulsed-field gradient NMR diffusivity measurements were conducted over a range of temperatures. Classical and ab initio molecular dynamics simulation results match experimental data reasonably well. Furthermore, the simulation results were then used to perform a more detailed analysis of the local structure and dynamics of these systems.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Unraveling the Heterogeneous but Ordered Microstructure of the Nonionic Deep Eutectic Solvent Formed by Lauric Acid and N -Methylacetamide
The nonionic deep eutectic solvent, formed by lauric acid (LA) and N-methylacetamide (NMA), has been shown to have a heterogeneous molecular structure in which the LA and NMA form nonpolar and polar domains, respectively. Previous vibrational spectroscopy experiments demonstrated that the ability of the LA domains to solvate compounds was limited to long carbon chains, whereas other nonpolar molecules, such as W(CO) 6 , were found to be solvated by both LA and NMA. These experiments were not fully compatible with the previously proposed micelle-like structure of the nonpolar domains of the LA-NMA DES. In this work, the modeling of the DES molecular structure is pursued using classical molecular dynamics simulations. The new classical model reproduces both the SAXS structural factors and the previously experimentally derived interaction map for these LA-NMA DESs. In addition, the simulation also shows that LA-NMA DESs form highly organized LA aggregates that are difficult to disorganize. Further evidence of the correct description provided by the newly derived model is obtained using a moderately polar probe: chloroform-d. Computations using the classical model have a good agreement with the solvation behavior of the probe derived from experiments, in which the location of the probe is found to be mostly within the polar domain of the DES. The computational model also demonstrates that the probe solvation is a consequence of the tightly packed LA structure, which causes nonpolar molecules to be located at the interphase of the DES nonpolar domains.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗