Search NASA⌕ Search

SEARCH · Search NASA

Results for “evolution reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Concerted Proton–Electron Transfer Minimizes Substituent Effects on Adsorbed Phthalocyanine Electrocatalysis

Molecularly modified electrodes (MMEs) are potent electrocatalysts, but few principles exist for their rational design. Electrocatalysis by soluble molecules depends strongly on substituents that tune the catalyst redox potential (E 1/2 ), but it is unclear if this parameter similarly impacts MME catalysis. Herein, we employ the hydrogen evolution reaction (HER) as a test case for comparing carbon-adsorbed cobalt phthalocyanine (CoPc/C) and cobalt hexadecafluoro-phthalocyanine (CoFPc/C). By correlating HER activity and voltammetric data to total Co surface concentration across a wide range of catalyst loadings, we find that only 5–25% of adsorbed Co sites contribute to the Co(II/I) redox wave and that this subpopulation poorly correlates with catalytic activity. Instead, in the low-loading limit, catalytic activity correlates linearly with the majority Co(II/I)-silent Co population, revealing per-site turnover frequency (TOF) values for HER. Despite a 230 mV difference in Co(II/I) redox potentials, CoPc/C and CoFPc/C display TOF values differing by less than a factor of 3 when compared over a wide potential range. Mechanistic studies point to an inner-sphere concerted proton–electron transfer step as rate-determining, suggesting that the Co–H bond dissociation free energy (BDFE) rather than the Co(II/I) E 1/2 is thermodynamically relevant. Computational studies indicate that the fluoro-substituents lead to compensatory changes in Co(II/I) E 1/2 and Co(I) basicity, leaving the Co–H BDFE largely unchanged between CoPc and CoFPc and thereby manifesting in similar catalytic rates. Furthermore, these results highlight the limited effect of E 1/2 -tuning on MME catalytic activity and motivate the development of methods to directly alter active site–substrate BDFE.

Catalysts↗
DOE OSTI2025

Cations Enhance Hydride Transfer to Noncatalytic Metals in Concentrated Alkaline Electrolytes

Alkali metal cations are known to influence the kinetics of the hydrogen evolution reaction (HER), acting as either promoters or inhibitors to the rate-determining step depending on the metal surface, local pH, and cation concentration. Despite the importance of concentrated electrolytes for commercial electrochemical cells, the impact of cations on the HER in concentrated alkaline environments (>1 M) and in mixed cation systems remains poorly understood. Here, this study quantifies the HER kinetics at polycrystalline metal surfaces (Pt, Au, Cu, and Fe) and the equilibrium solvation environment in pure and mixed alkali metal hydroxide electrolytes at concentrations up to 3.0 M. Kinetic analyses of Au, Cu, and Fe revealed a positive cation-concentration-effect that was primarily driven by changes to the charge transfer coefficient. Multinuclear NMR spectroscopy examined the solvation of H 2 O/OH – species and the alkali cations as a function of (mixed) alkali cation concentration(s), and demonstrated rapid exchange between solvent, hydroxide, and solvated cations. Together, these findings support models where HER kinetics on noncatalytic metal surfaces in strongly alkaline conditions are primarily governed by the average polarization and polarizability of the metal/solution interface and that increasing cation activity continues to increase the transfer coefficient at metal-hydroxide concentrations up to 3.0 M. Electrolytes and additives which can outcompete weakly hydrated cations and disrupt the interfacial water structure are expected to suppress parasitic HER at electrodes for energy storage and electroplating.

Cations↗
DOE OSTI2026

Bifunctional Electrocatalysts with High-Entropy Alloys: Bridging Hydrogen Evolution and Oxygen Reduction

High-entropy alloys (HEAs) have emerged as a promising class of bifunctional electrocatalysts capable of simultaneously driving the hydrogen evolution reaction (HER) and the oxygen reduction reaction (ORR) with high activity and durability. Their near-equiatomic multicomponent compositions give rise to unique physicochemical characteristics, including lattice distortion, sluggish diffusion, high-entropy stabilization, and pronounced electronic heterogeneity, that collectively generate diverse and synergistic active sites inaccessible in conventional alloys. This review summarizes recent progress in HEA-based bifunctional electrocatalysis, with a focus on the fundamental mechanisms governing HER and ORR activity, stability, and selectivity. We discuss advances in synthesis strategies, ranging from confined growth and step-alloying to scalable continuous-flow methods, that enable precise control over composition, size, and surface structure. Complementary computational and data-driven approaches, including density functional theory, machine-learning-assisted screening, and descriptor development, are highlighted as essential tools for navigating the vast HEA design space and establishing structure−property relationships. Particular attention is paid to adsorption-energy distributions, multisite cooperativity, and environmental effects under realistic electrochemical conditions. Finally, we outline current challenges and future opportunities for integrating mechanistic understanding with AI-guided, closed-loop design frameworks to accelerate the discovery of next-generation HEA bifunctional electrocatalysts for sustainable energy conversion.

Alloys↗
DOE OSTI2026

Enhancing Acidic Oxygen Evolution Activity by Supporting Iridium Electrocatalysts on Tantalum Carbide

For a high-performance proton exchange membrane water electrolyzer (PEMWE), acidic oxygen evolution reaction (OER) electrocatalysts require highly dispersed iridium oxide (IrO x ) nanoparticles. Although carbon-based materials have been explored as promising supports for IrO x nanoparticles, their limited stability under harsh oxidative and acidic PEMWE conditions remains a significant challenge. Here, in this study, we report the synthesis and in situ characterization of active and durable IrOx electrocatalysts supported on electrochemically stable and electrically conducting tantalum carbide (TaC). When applied in a PEMWE, the IrO x /TaC electrocatalyst achieves a cell voltage of 1.71 V at 1.0 A cm –2 , outperforming the commercial IrO 2 catalyst (1.82 V at 1.0 A cm –2 ). Furthermore, the IrO x /TaC catalyst maintains a stable operation for 200 h at 0.5 A cm –2 with a low degradation rate of 36 μV h –1 . Density functional theory calculations further confirm that Ir–O–Ta bond formation at the IrO x /TaC interface reduces the overpotential of the OER compared to IrO 2 . This study underscores the pivotal role of supporting IrO x over stable and conducting metal carbides, providing guidance for the design of advanced acidic OER catalysts.

58 GEOSCIENCES↗
DOE OSTI2024

Influence of Annealing Temperature on the OER Activity of NiO(111) Nanosheets Prepared via Microwave and Solvothermal Synthesis Approaches

Earth-abundant transition metal oxides are promising alternatives to precious metal oxides as electrocatalysts for the oxygen evolution reaction (OER) and are intensively investigated for alkaline water electrolysis. OER electrocatalysis, like most other catalytic reactions, is surface-initiated, and the catalyst performance is fundamentally determined by the surface properties. Most transition metal oxide catalysts show OER activities that depend on the predominantly exposed crystal facets/surface structure. Therefore, the design of synthetic strategies to obtain the most active crystal facets is of significant research interest. In this work, rock salt NiO OER catalysts with (111) predominantly exposed facets were synthesized by a solvothermal (ST) method either heated under supercritical or microwave-assisted (MW) conditions. Particular emphasis was placed on the influence of the post annealing temperature on the structural configuration and OER activity to compare their catalytic performances. The as-prepared electrocatalysts are pure α-Ni hydroxides which were converted to rock salt NiO (111) nanosheets with hexagonal pores after heat treatment at different temperatures. The OER activity of the electrodes has been evaluated in 0.1 M KOH using geometric and intrinsic current densities via normalization by the disk area and BET area, respectively. The lowest overpotential at a geometric current density of 10 mA/cm 2 is found for samples pretreated by heating between 400 and 500 °C with a catalyst loading of 115 μg/cm 2 . Despite the very similar nature of the catalysts obtained from the two methods, the ST electrodes show a higher geometric and intrinsic current density for 500 °C pretreatment. The MW electrodes, however, achieve an optimal geometric current density for 400 °C pretreatment, while their intrinsic current density requires pretreatment over 600 °C. Interestingly, pretreated electrodes show consistently higher OER activity as compared to the poorly crystalline/less ordered hydroxide as-prepared electrocatalysts. Thus, our study highlights the importance of the synthesis method and pretreatment at an optimal temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis, Properties, and Electrochemical Proton Reduction of a Homoleptic Tetrathiolato Ni-Site Model of [NiFe]-Hydrogenase

[NiFe]-hydrogenase enzymes process H 2 at a nonplanar tetracysteinato-Ni site, the sole participator in proton binding/redox chemistry during turnover. With the objective of assessing whether a simple tetrahedral/ tetrathiolato-Ni 2+ core could promote H 2 evolution reaction (HER), we synthesized (Et 4 N) 2 [Ni(S-p-CF 3 −Ph) 4 ] (1) employing para-trifluoromethylbenzenethiolate ( − S-p-CF 3 −Ph) as a Ni-site analog of [NiFe]-hydrogenase. Spectroscopic measurements and X-ray crystallography confirm the distorted tetrahedral geometry of 1. Dissolution of 1 results in partial thiolate dissociation and formation of S,S-bridged complexes such as (Et 4 N) 2 [Ni 2 (S-p-CF 3 −Ph) 6 ] (3) among other ill-defined species. Dissociation is further accelerated in the presence of Brønsted acids, complicating the assessment of 1 for proton reduction. However, this dissociation/proton instability is suppressed in the presence of additional thiolate ligand to ensure tetrahedral/tetrathiolato 1 persists in solution. Electrochemical HER activity was evaluated by monitoring the current response of an MeCN solution of 1/ excess thiolate after sequential titration with a weak Brønsted acid (acetic acid). The results suggest that 1 is a modest electrocatalyst for the HER with a turnover frequency of 14.5 ± 3.6 s −1 and an overpotential of 0.72 ± 0.02 V. Control experiments and supplementary DFT computations indicate that 1, or a species derived from 1, is responsible for the HER and suggest an ECCE-type mechanism.

Evolution reactions↗
DOE OSTI2025

Nickel Sulfide-Nanowire-Filled Carbon Nanotubes as an Efficient Overall Water Splitting Electrocatalyst

Pursuing stable, efficient, and cost-effective nanostructured bifunctional electrocatalysts is crucial for advancing the electrochemical water splitting process and enabling clean hydrogen energy production. In recent years, considerable efforts have focused on developing highly efficient and durable commercial electrocatalysts for the oxygen evolution reaction (OER) and overall water splitting (OWS). This research introduces an OWS electrocatalyst-nickel sulfide-filled carbon nanotubes grown on a carbon cloth substrate (Ni 3 S 2 @CNTs/CC), synthesized via a one-step in-situ process. The synergistic integration of metal sulfide (Ni 3 S 2 ) and carbon nanotubes provides abundant active sites for catalytic reactions, ensuring a robust composite nanostructure with enhanced durability. Furthermore, the electrocatalytic performance for OER and OWS has been significantly improved by a simple acid treatment to the electrocatalysts, which introduces physical and chemical defects, particularly oxygen functional groups (the acid-treated sample is termed as Ni 3 S 2 @CNTs/CC-AT). As OER electrocatalysts, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT present overpotentials of 304 and 200 mV, respectively, for achieving a current density of 10 mA/cm 2 in the OER process. Furthermore, for complete water splitting in 1.0 M KOH electrolyte, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT exhibit potentials of 1.63 and 1.44 V, respectively, to achieve a current density of 10 mA/cm 2 when employed as both anode and cathode. Moreover, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT demonstrate durable nature for 22 and 20 h durability in the OER and OWS processes, respectively, offering a promising alternative to ruthenium- and iridium-based electrocatalysts for electrochemical hydrogen production through water splitting. In conclusion, the in-situ synthesis method and acid treatment strategy described in this research are promising approaches to fabricating high-performance encapsulated carbon-nanotube-based electrocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Supramolecular Metal‐Organic Framework Electrocatalysts With Hydration‐Adaptive Gallery Expansion and Linker‐Mediated Distal Ni‐Co Cooperation Enable Framework‐Retentive Oxygen Evolution

Atomic‑level tailoring of electronic communication between spatially separated metal sites offers a route to accelerate multielectron electrocatalysis. We report Ni-TPTC, Co-TPTC, and heterobimetallic Ni-Co-TPTC supramolecular metal-organic frameworks (SMOFs) for the oxygen evolution reaction (OER) built from a terphenyl‑tetracarboxylate (TPTC) linker. Single-crystal X-ray diffraction of heterobimetallic Ni–Co–TPTC reveals trans-bis-aqua octahedral chains assembled into a π-stacked, hydrogen-bonded lattice and confirms retention of the parent architecture, while powder X-ray diffraction supports an isostructural Co analog. In 1.0 M KOH, Ni-Co-TPTC reaches 20 mA cm −2 at 350 mV and maintains operation at ∼60 mA cm −2 for 45 h with modest decay of the initial current. Time‑dependent ex situ diffraction shows dominant framework reflections with low‑angle shifts consistent with gallery dilation (d‑spacing ∼7.7 → ∼9.2 Å) during early operation, while Co K‑edge X‑ray absorption and microscopy reveal Co‑rich oxide/oxyhydroxide‑like domains at longer times that correlate with decay. X‑ray photoelectron spectroscopy, quantified by the Remote Binding‑Energy Differential, tracks composition‑dependent Ni-Co polarization, and DFT free‑energy analysis suggests that a model Ni-Co environment lowers the Co‑centered potential‑limiting step by ∼0.24 eV relative to the Co‑only framework. Furthermore, these results suggest that framework‑retentive expansion and distal Ni-Co coupling can drive OER activity before gradual deligation and oxide formation mark longer‑time degradation.

Supramolecular metal-organic frameworks (SMOFs)↗
DOE OSTI2025

Oxygen Evolution on Mechanically Strained TiO2/NiTi: Implications of Compositional Heterogeneity at (Photo)Electrocatalytic Interfaces

The adsorption and activation energetics underpinning small molecule conversion on heterogeneous (photo)electrocatalysts are intrinsically tied to catalyst surface properties. Absent compositional characterization techniques with sufficient interface sensitivity, however, (photo)electrochemical performance can be misinterpreted in the context of bulk or near-surface material properties. Here we provide a fundamental investigation of the convoluting role of near-surface compositional heterogeneity in the interpretation of (photo)electrochemical alkaline oxygen evolution reaction (OER) activity, highlighting challenges in correlating composition measured by surface- and near-surface-sensitive probes. TiO2 thin films grown by air-annealing the superelastic alloy Nitinol (TiO2/NiTi) crack under tensile mechanical strain, increasing the number of electrochemically active Ni sites (Ni site density) that are probed via voltammetric features corresponding to Ni3+/Ni2+ redox events. (Photo)electrochemical OER kinetics trend with Ni site density, with overpotentials and Tafel slopes decreasing for Ni site densities < 1013 Ni/cm2geo and asymptotically approaching the performance of the base NiTi substrate for Ni site densities > 1013 Ni/cm2geo. Photoelectrochemical fill factors follow similar Ni site density dependent trends. When probing unstrained TiO2/NiTi, Ni site densities are two orders of magnitude higher when comparing near-surface-sensitive techniques (e.g., X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectrometry (TOF-SIMS), and scanning transmission electron microscopy-energy dispersive X-ray spectroscopy (STEM-EDS)) to surface-sensitive electrochemical measurements. This result highlights the challenge of correlating kinetic performance with intrinsic surface properties of electrochemical interfaces in the presence of near-surface compositional heterogeneity. Further, it reinforces the importance of fundamental investigations of surfaces with well-controlled composition and structure and the need for physically grounded and self-consistent interpretation of multiple near-surface characterization techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

How the Arrangement of Platinum Atoms on Ruthenium Nanoparticles Improves Hydrogen Evolution Activity

The platinum‐ruthenium (PtRu) system is highly active for hydrogen evolution reaction (HER) in alkaline media with both Pt and Ru playing active roles in the water dissociation step that generates adsorbed hydrogen atoms. Precise control of the arrangement of Pt atoms on Ru nanoparticles can maximize the Pt‐Ru sites for water dissociation and Pt‐Pt sites for hydrogen production and can considerably improve HER catalytic performance. By directing the growth and distribution of Pt on Ru hourglass nanoparticles, the arrangement of Pt on Ru is controlled into forming Pt islands, small Pt clusters, and strings of a few Pt atoms. Calculations show that the unique atomic string arrangements of Pt on Ru is the thermodynamically favorable configuration. Additionally, these strings have a favorable combination of Pt‐Ru and Pt‐Pt sites, making the Pt‐string on Ru the most active catalyst with a more than fivefold increase in turnover frequency for alkaline HER compared to the Pt‐island on Ru catalyst. The results show how controlling the Pt atomic arrangement on Ru nanoparticle surfaces for the tuning of Pt‐Pt and Pt‐Ru neighboring sites can direct toward a more efficient HER mechanism and thereby significantly enhancing HER performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The Role of Cu 3+ in the Oxygen Evolution Activity of Copper Oxides

Cu-based oxides and hydroxides represent an important class of materials from a catalytic and corrosion perspective. In this study, we investigate the formation of bulk and surface Cu 3+ species that are stable under water oxidation catalysis in alkaline media. So far, no direct evidence existed for the presence of hydroxides (CuOOH) or oxides, which were primarily proposed by theory. Here, this work directly places CuOOH in the oxygen evolution reaction (OER) Pourbaix stability region with a calculated free energy of −208.68 kJ/mol, necessitating a revision of known Cu–H 2 O phase diagrams. We also predict that the active sites of CuOOH for the OER are consistent with a bridge O* site between the two Cu 3+ atoms with onset at ≥1.6 V vs the reversible hydrogen electrode (RHE), aligning with experimentally observed Cu 2+/3+ oxidation waves in cyclic voltammetry of Fe-free and Fe-spiked copper in alkaline media. Trace amounts of Fe (2 μg/mL (ppm) to 5 μg/mL) in the solution measurably enhance the catalytic activity of the OER, likely due to the adsorption of Fe species that serve as the active sites . Importantly, modulation excitation X-ray absorption spectroscopy (ME-XAS) of a Cu thin-film electrode shows a distinct Cu 3+ fingerprint under OER conditions at 1.8 V vs RHE. Additionally, in situ Raman spectroscopy of polycrystalline Cu in 0.1 mol/L (M) KOH revealed features consistent with those calculated for CuOOH in addition to CuO. Overall, this work provides direct evidence of bulk electrochemical Cu 3+ species under OER conditions and expands our longstanding understanding of the oxidation mechanism and catalytic activity of copper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Competitive Valerate Binding Enables RuO 2 -Mediated Butene Electrosynthesis in Water

The (non)-Kolbe oxidation of valeric acid, sourced from a hydrolysis product of cellulose, provides a sustainable synthetic route to access value-added products, such as butene. An essential mechanistic step preceding product formation involves the oxidative and decarboxylative cleavage of a C–C bond. Yet, the role of the electrode surface in mediating this oxidative step remains an open question: the electron transfer can occur either via an inner-sphere or outer-sphere mechanism. Here, we report the electrochemical, in situ spectroscopic, computational, and reactivity studies of RuO 2 -mediated oxidative decarboxylation of valeric acid to butene in aqueous electrolytes. We find that carboxylates bind to RuO 2 anode surfaces at potential values where decarboxylation products are observed. Our results are consistent with a reaction scheme where the competitive and catalytic oxygen evolution reaction (OER) is impeded by these bound carboxylate species while these species are inert toward butene formation. Our results implicate an outer-sphere electron transfer mechanism for decarboxylation where the surface chemistry of the RuO 2 electrode serves to enable higher non-Kolbe reaction selectivity by suppressing the parasitic OER. Furthermore, our findings delineate interfacial design principles for selective electrochemical systems that utilize water as the ultimate oxidant for sustainable decarboxylation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Computational insights into hydrogen adsorption energies on medium-entropy oxides

High entropy oxides (HEOs) have emerged as promising catalysts for several important chemical transformations including alkane activation. Hydrogen adsorption energy (HAE) has been used as a key descriptor for many reactions including methane C–H activation and hydrogen evolution reactions. Hence, understanding the relationship between HAEs and the surface chemistry of HEO surfaces could lay the foundation for meaningful correlations among methane C–H activation, HAE, and the complex, local environment of HEO surfaces. Here, we used a medium-entropy oxide as a prototypical system – Mg 0.25 Ni 0.25 Cu 0.25 Zn 0.25 O with a rock-salt structure – to interrogate these relationships. We sampled 2000 different surfaces of its (100) plane and calculated the HAEs at randomly chosen surface O sites using density functional theory (DFT). Our analysis of the 2000 data points reveals that the HAEs at the surface O sites are significantly influenced by the local environment around the adsorption sites, particularly the nature of the metal atom directly below the surface O site where H adsorbs. After comparing several popular graph-neural-network-based machine learning models, we found that the DimeNet++ model performed best achieving satisfactory accuracy in predicting HAEs for both Mg 0.25 Ni 0.25 Cu 0.25 Zn 0.25 O and slightly varied compositions. Our work underscores the promise of such models and the need for further refinement to address the complexity of HEOs.

Song, Haohong [Vanderbilt Univ., Nashville, TN (Un↗
DOE OSTI2025

Computational Study of Indium Oxide Photoelectrodes

Using a combination of first-principles molecular dynamics simulations and electronic structure calculations, we characterize the atomistic structure and vibrational properties of a photocatalytic surface of In 2 O 3 , a promising photoelectrode for the production of hydrogen peroxide. We then investigate the surface in contact with water and show that the electronic states of In 2 O 3 are appropriately positioned in energy to facilitate the two-electron water oxidation reaction (WOR) over the competing four-electron oxygen evolution reaction. In conclusion, we further propose that the use of strained thin films interfaced with water is beneficial in decreasing the optical gap of In 2 O 3 and thus in utilizing a wider portion of the solar spectrum for the WOR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Deciphering competing elementary steps to correlate electrocatalyst chemical state with activity

The overpotential in multielectron transfer heterogeneous electrocatalysis fundamentally arises from thermodynamic and kinetic disparities among elementary steps; however, deciphering coupled and competing steps has long remained a challenge. Here, we establish an electrochemical deconvolution paradigm based on key processes in electrocatalytic reactions, such as charge accumulation, electron/proton transfer, and intermediate evolution, to resolve competing elementary steps. Taking the oxygen evolution reaction as a prototypical reaction, we design a model catalyst featuring a precise isolated cation-anion vacancy pair and track the previously elusive electrochemical behavior of lattice oxygen by disentangling interference from adsorbed oxygen intermediates. Mechanistically, the lattice oxygen oxidation pathway originates from the spontaneous, nonelectrochemical deprotonation of replenished water molecules coordinated to unsaturated cation sites. Alternating current techniques further reveal that although lattice oxygen oxidation requires a higher potential than metal oxidation, it exhibits faster kinetics, providing insight into its superior catalytic activity. These findings establish a direct experimental correlation between the initial chemical state and the catalytic activity and prove surface-confined lattice oxygen cycling. Furthermore, expanding conventional potential-current analysis into a multidimensional framework enables disentanglement of thermodynamic and kinetic contributions of key elementary steps, thereby guiding the rational optimization of various complex multielectron transfer reactions.

OER↗
DOE OSTI2024

Addressing challenges for operating electrochemical solar fuels technologies under variable and diurnal conditions

The outdoor operation of electrochemical solar fuels devices must contend with challenges presented by the cycles of solar irradiance, temperature, and other meteorological factors. Herein, we discuss challenges associated with these fluctuations presented over three timescales, including the effects of diurnal cycling over the course of many days, a single diurnal cycle over the course of hours, and meteorological phenomena that cause fluctuations on the order of seconds to minutes. We also highlight both reaction-independent and reaction-specific effects of variable conditions for the hydrogen evolution reaction and CO 2 reduction reaction. We identify key areas of research for advancing the outdoor operation of solar fuels technology and highlight the need for metrics and benchmarks to enable the comparison of diurnal studies across systems and geographical locations.

08 HYDROGEN↗
DOE OSTI2025

Investigation of Electrocatalytic CO 2 Reduction on MXene Materials via First-Principles Simulations

Computational studies of CO 2 reduction to yield various products were carried out on the basal plane and edges of different MXene materials. The impact of vacancies upon Mo 2 TiC 2 T x , W 2 TiC 2 T x , and Ti 3 C 2 T x (T x = O and OH) was also examined for both edge and basal sites. Initial calibrations were carried out to generate surfaces with optimal oxide/hydroxide ratios and proper termination sites upon which various vacancy sites were explored to ensure an accurate model of the surfaces’ resting states. From this work, Mo 2 TiC 2 O was determined to exhibit the lowest theoretical overpotential for methane as determined by volcano plot analyses. At a large enough vacancy concentration, the CO 2 reduction reaction (CO 2 RR) is predicted to outcompete the hydrogen evolution reaction (HER) as the predominant reaction on the surface. In conclusion, when examining the edge of Mo 2 TiC 2 O, stronger CO 2 binding was exhibited to such an extent that the reaction was predicted to terminate after the generation of formate on the edge.

Lund, Colton [Argonne National Laboratory (ANL), A↗
DOE OSTI2024

Seawater alkalization via an energy-efficient electrochemical process for CO 2 capture

Electrochemical pH-swing strategies offer a promising avenue for cost-effective and energy-efficient carbon dioxide (CO 2 ) capture, surpassing the traditional thermally activated processes and humidity-sensitive techniques. The concept of elevating seawater’s alkalinity for scalable CO 2 capture without introducing additional chemical as reactant is particularly intriguing due to its minimal environmental impact. However, current commercial plants like chlor-alkali process or water electrolysis demand high thermodynamic voltages of 2.2 V and 1.23 V, respectively, for the production of sodium hydroxide (NaOH) from seawater. These high voltages are attributed to the asymmetric electrochemical reactions, where two completely different reactions take place at the anode and cathode. Here, we developed a symmetric electrochemical system for seawater alkalization based on a highly reversible and identical reaction taking place at the anode and cathode. We utilize hydrogen evolution reaction at the cathode, where the generated hydrogen is looped to the anode for hydrogen oxidation reaction. Theoretical calculations indicate an impressively low energy requirement ranging from 0.07 to 0.53 kWh/kg NaOH for established pH differences of 1.7 to 13.4. Experimentally, we achieved the alkalization with an energy consumption of 0.63 kWh/kg NaOH, which is only 38% of the theoretical energy requirements of the chlor-alkali process (1.64 kWh/kg NaOH). Further tests demonstrated the system’s potential of enduring high current densities (~20 mA/cm 2 ) and operating stability over an extended period (>110 h), showing its potential for future applications. Notably, the CO 2 adsorption tests performed with alkalized seawater exhibited remarkably improved CO 2 capture dictated by the production of hydroxide compared to the pristine seawater.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗