Examination of returned Surveyor 3 camera visor for alpha radioactivity
Returned Surveyor 3 camera visor examined for alpha radioactive deposit formed by decay of radon isotopes diffusing out of lunar surface
Economou, T. E.↗
SEARCH · Search NASA
Results for “examining”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The preliminary examination and preparation of lunar sample 12013
Apollo 12 lunar rock 12013 preliminary examination and preparation for instrumental analysis, noting feldspar content and igneous nature
Anderson, D. H.↗
Meteoroid activity on the lunar surface from the Surveyor III sample examination
Lunar surface meteoroid activity from Surveyor 3 sample examination, comparing with predictions by cumulative-flux and near-earth models
Cour-Palais, B. G.↗
Results of the Surveyor III sample impact examination conducted at the Manned Spacecraft Center
Apollo 12 returned Surveyor 3 samples examination for meteoroid and lunar ejecta impacts evidence by optical and electron microscopy
Cour-Palais, B. G.↗
Examination of the anomalous behavior of three gravity gradient satellites
The anomalous oscillatory behavior of three satellites was examined. The satellites were all hinged, two-body, gravity gradient configurations passively stabilized about their three principal axes by gravity gradient and damper torques. Two basic behavior patterns were observed. Either the satellites were stable with attitude perturbations less than + or - 5 deg or their behavior tended towards a low frequency rigid body oscillation dominated by large yaw motions and in some cases by yaw inversions. A causal relationship between sun angle and the character of satellite behavior was observed which appears to indicate that thermal distortion is a critical factor in a gravity gradient satellite's dynamic behavior. The behavior appeared to be futher modified by the existence of response frequencies that were higher than anticipated values.
Goldman, R. L.↗
Analysis of urban residential environments using color infrared aerial photography: An examination of socioeconomic variables and physical characteristics of selected areas in the Los Angeles basin, with addendum: An application of the concepts of the Los Angeles residential environment study to the Ontario-Upland region of California
Aerial photographs taken with color infrared film were used to differentiate various types of residential areas in the Los Angeles basin, using characteristics of the physical environment which vary from one type of residential area to another. Residential areas of varying quality were classified based on these characteristics. Features of the physical environment, identifiable on CIR aerial photography were examined to determine which of these are the best indicators of quality of residential areas or social areas, as determined by the socioeconomic characteristics of the inhabitants of the selected areas. Association between several physical features and the socioeconomic variables was found to exist.
Mullens, R. H., Jr.↗
Metallic transfer between metals in sliding contact examined by auger emission spectroscopy
Metallic transfer between polycrystalline metals in sliding contact was examined. Hemispherical riders of iron, nickel, and cobalt were slid on tungsten, tantalum, niobium, and molybdenum disks in ultrahigh vacuum. Auger emission spectroscopy was used to monitor the elemental composition of the disk surfaces. Iron, nickel, and cobalt transferred to tungsten, whereas only cobalt transferred to tantalum, niobium, and molybdenum. The results of this investigation are discussed in terms of the cohesive energy and strain hardening characteristics of the specimen materials.
Pepper, S. V.↗
Preliminary examination of lunar samples
The morphology, mineralogy, petrology, and chemistry of the samples returned from the Apollo 15 landing site are discussed. A selenological description of the area from which the samples were taken is given. The diversity of the samples and the variety of sample environments found at the Apollo 15 site have resulted in several hypotheses that relate individual samples to local situations after even a preliminary examination of the samples. Several somewhat speculative hypotheses that relate individual samples to a geological framework are discussed in the hope that the hypotheses will provide guidelines for more detailed studies of the samples to arrive at an integrated understanding of the selenology of the Apollo 15 site.
Source record↗
Preliminary examination of Surveyor 3 components for impact phenomena
Two pieces of the Surveyor 3 spacecraft recovered during the Apollo 12 mission were examined for secondary lunar ejecta and micrometeorite impacts. One piece was section E of the aluminum strut; the other was the nickel-coated beryllium television camera mirror.
Hallgren, D. S.↗
Examination of sample of Surveyor 3 strut for meteoroid impacts
A 3.8-cm-long sample of the bare, 1.3-cm-wide, hollow aluminum alloy strut returned from Surveyor 3 and an equivalent terrestrial sample were examined optically for meteoroid impact.
Zernow, L.↗
Results of examination of the returned Surveyor 3 samples for particulate impacts
The television housing and a section of the strut of the radar altimeter and Doppler velocity sensor were examined optically and with a scanning electron microscope for particulate impacts. The white surface of the camera was discolored during the months the Surveyor 3 was on the moon; however, most of the craters must have occurred as a result of lunar dust sandblasted by the LM exhaust. The polished section of the strut exhibits contamination which appears brown and seems to be partially composed of crystals. Electron microscopic analysis of the strut section indicated no craters of hypervelocity impact origin, confirmed pitting density results of the optical scans, and indicated that material in the craters is of lunar origin. No meteorite impacts larger than 25 microns were detected on the tubing section.
Cour-Palais, B. G.↗
Examination of returned Surveyor 3 camera visor for alpha radioactivity
The TV camera visor was placed in a vacuum chamber and examined for alpha radioactivity using an alpha-scattering instrument, and plates covered with the same paint and made at the same time as the visor were used as a control. The spectra of visor and plates are very similar, and it is concluded that the gross activity on the visor is due entirely to the activity of the paint. The data were used to obtain the amount of Po-210 activity on the lunar surface. It is felt that the lack of detected alpha radioactivity does not indicate a lack of activity on the moon, since dust layers were knocked off the visor.
Economou, T. E.↗
An electron microscopy examination of primary recrystallization in TD-nickel.
Primary recrystallization in TD-nickel 1 in. bar has previously been regarded as the process by which the initial fine grain structure is converted to a coarse grain size (increases in grain size by 500 times) under suitable deformation and annealing conditions. This process is dependent on deformation mode. While it occurs readily after rolling transverse to the bar axis and annealing (800 C), it is completely inhibited by longitudinal rolling and swaging deformations, even for very high (1320 C) annealing temperatures. A transmission electron microscopy examination of deformation and annealing substructures indicates that primary recrystallization in TD-nickel 1 in. bar actually occurs on the sub-light optical level, to produce a grain structure similar in size to the initial fine grained state.
Petrovic, J. J.↗
A critical examination of the validity of simplified models for radiant heat transfer analysis.
Examination of the directional effects of the simplified models by comparing the experimental data with the predictions based on simple and more detailed models for the radiation characteristics of surfaces. Analytical results indicate that the constant property diffuse and specular models do not yield the upper and lower bounds on local radiant heat flux. In general, the constant property specular analysis yields higher values of irradiation than the constant property diffuse analysis. A diffuse surface in the enclosure appears to destroy the effect of specularity of the other surfaces. Semigray and gray analyses predict the irradiation reasonably well provided that the directional properties and the specularity of the surfaces are taken into account. The uniform and nonuniform radiosity diffuse models are in satisfactory agreement with each other.
Toor, J. S.↗
Examination of UC-ZrC after long term irradiation at thermionic temperature
Two fluoride tungsten clad UC-ZrC fueled capsules, designated as V-2C and V-2D, were examined a hot cell after irradiation in NASA Plum Brook Reactor at a maximum cladding temperature of 1930 K for 11,089 and 12,031 hours to burnups of 3.0 x 10 to the 20th power and 2.1 x 10 to the 20th power fission/c.c. respectively. Percentage of fission gas release from the fuel material was measured by radiochemical means. Cladding deformation, fuel-cladding interaction and microstructures of fuel, cladding, and fuel-cladding interface were studied metallographically. Compositions of dispersions in fuel, fuel matrix and fuel-cladding interaction layer were analyzed by electron microprobe techniques. Axial and radial distributions of burnup were determined by gamma-scan, autoradiography and isotopic burnup analysis. The results are presented and discussed in conjunction with the requirements of thermionic fuel elements for space power application.
Yang, L.↗
The examination of urine samples for pathogenic microbes by the luciferase assay for ATP. 1: The effect of the presence of fungi, fungal like bacteria and kidney cells in urine samples
A method for accurately determining urinary tract infections in man is introduced. The method is based on adenosine triphosphate (ATP) concentration in urine samples after removing nonbacterial ATP. Adenosine triphosphate concentration is measured from the bioluminescent reaction of luciferase when mixed with ATP. An examination was also made of the effectiveness of rupturing agents on monkey kidney cells Candia albicans, a Rhodotorula species, and a Streptomyces species in determining whether these cells could contribute ATP to the bacterial ATP value of a urine sample.
Bush, V. N.↗
Results of Uranium Dioxide-Tungsten Irradiation Test and Post-Test Examination
A uranium dioxide (UO2) fueled capsule was fabricated and irradiated in the NASA Plum Brook Reactor Facility. The capsule consisted of two bulk UO2 specimens clad with chemically vapor deposited tungsten (CVD W) 0.762 and 0.1016 cm (0.030-and 0.040-in.) thick, respectively. The second specimen with 0.1016-cm (0.040-in.) thick cladding was irradiated at temperature for 2607 hours, corresponding to an average burnup of 1.516 x 10 to the 20th power fissions/cu cm. Postirradiation examination showed distortion in the bottom end cap, failure of the weld joint, and fracture of the central vent tube. Diametral growth was 1.3 percent. No evidence of gross interaction between CVD tungsten or arc-cast tungsten cladding and the UO2 fuel was observed. Some of the fission gases passed from the fuel cavity to the gas surrounding the fuel specimen via the vent tube and possibly the end-cap weld failure. Whether the UO2 loss rates through the vent tube were within acceptable limits could not be determined in view of the end-cap weld failure.
Collins, J. F.↗
Postoperational examination of an externally configured thermionic converter
An externally configured thermionic converter was operated for 200 h. The converter was disassembled and examined to determine internal changes as a result of operation. The metal/ceramic seals and all joints were unaffected by operation. Converter output voltage and operational time were sufficient to produce electrolysis of stabilized zirconia spacers used in the converter. Surface analysis of the electrode surfaces indicated the presence on the tungsten emitter of only oxygen, carbon, and silicon. The niobium collector was, however, 25 to 40% covered with other elements. This coverage represented all elements present within the converter as construction materials other than silicon and tungsten, which were not detected on the collector, and carbon, which was detected only in small amounts.
Phillips, W. M.↗