Search NASA⌕ Search

SEARCH · Search NASA

Results for “feedstock characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Integrated Biorefinery of Brewer’s Spent Grain for Second-Generation Ethanol, Mycoprotein, and Bioactive Vinasse Production

Brewer’s spent grain (BSG), the main lignocellulosic by-product of the beer industry, represents an abundant yet underutilized resource with high potential for valorization. This study presents an integrated biorefinery approach to convert BSG into second-generation (2G) ethanol, bioactive vinasse for plant growth promotion, and fungal biomass as a potential mycoprotein source. The biomass was first subjected to biological delignification using the white-rot fungus Ganoderma lucidum, after which two valorization routes were explored: (i) evaluation of the fungal biomass as a mycoprotein candidate and (ii) alcoholic fermentation for ethanol production. For the latter, three pretreatment strategies were assessed (diluted sulfuric acid and two deep eutectic solvents (DESs) based on choline chloride combined with either glycerol or lactic acid) followed by a one-pot enzymatic saccharification and fermentation using Kluyveromyces marxianus SLP1. The highest ethanol yield on substrate (YP/S) was achieved with [Ch]Cl:lactic acid pretreatment (0.46 g/g, 89.32% of theoretical). Vinasse, recovered after distillation, was characterized for organic acid content and tested on Solanum lycopersicum seed germination, showing promising biostimulant activity. Overall, this work highlights the potential of BSG as a sustainable feedstock within circular economy models, enabling the production of multiple bio-based products from a single residue.

Ganoderma lucidum↗
DOE OSTI2021

Flash graphene from rubber waste

Most conventional production processes for graphene are time-consuming, solvent-intensive, and energetically demanding. To circumvent these limitations for mass production, flash Joule heating (FJH) has been shown to be an effective method to synthesize graphene. Here, methods for optimizing production of graphene from rubber waste feedstocks are shown. Through careful control of system parameters, such as pulse voltage and pulse time, turbostratic flash graphene (tFG) can be produced from rubber waste. It is characterized by Raman spectroscopy, X-ray diffraction and thermogravimetric analysis. Here, the resulting tFG can be easily exfoliated and dispersed into various solvents because of its turbostratic arrangement. Addition of tFG into Portland cement results in a significant increase in the compressive strength of the composite. From a materials perspective, FJH offers a facile and inexpensive method for producing high quality tFG from rubber waste materials, which would otherwise be disposed of in landfills or burned for fuel. FJH allows for upcycling of low-value rubber waste into high-value carbon nanomaterials for use as reinforcing additives.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Inorganic characterization of switchgrass biomass using laser-induced breakdown spectroscopy

The inorganic characterization of 74 samples of switchgrass using laser-induced breakdown spectroscopy (LIBS) was undertaken. Determination of ash and inorganic elements content in biomass materials is vital for feedstock screening for bioconversion processes. Hierarchical models using principal component analysis (PCA) and partial least square analysis (PLS) were used to determine the presence of specific elemental micronutrients that are important in determining plant health for robust biomass production. LIBS uses a 532 nm laser with 45 mJ of laser power to excite the samples of switchgrass plant material and the emission of all the elements present in the plant samples were recorded in single spectra with a wide wavelength range of 200–800 nm. The results were compared to the laboratory standard technique, e.g., ICP-OES technique, to determine the true values for major micronutrients such as, silicon (Si), potassium (K), calcium (Ca), magnesium (Mg), phosphorus (P), and sulfur (S). Overall, our objectives were: 1) To determine the spectral features of switchgrass containing different amounts of these elements and 2) To examine the viability of this technique for determining the quality of the feedstock in terms of its inorganic composition. Cross-validation results showed that the broad-based model developed is promising for inorganics prediction in switchgrass. The LIBS validation prediction for the micronutrient elements mentioned here have been obtained. The regression coefficients for Si, were obtained to be 0.995, 0.994 for calibration and validation respectively, in case of Ca the regression coefficients were, 0.994 and 0.992 for calibration and validation. Similarly, in the case of Mg and K these were calculated to be 0.992 and 0.985, and 0.994 and 0.993 respectively. The regression coefficients are not as good as those for the elements mentioned, in case of the two elements S and P. They are 0.957, and 0.878, and 0.952 and 0.894 respectively for calibration, validation for the two elements. This demonstrates that LIBS-based techniques are inherently well suited for diverse environmental applications. Furthermore, LIBS along with PLS model can show capability in determining the viability of switchgrass as a biomass in the production of biofuels and survivability of switchgrass in processes associated with climate change. LIBS can help determining which switchgrass would be appropriate for a specific conversion process that favors low ash content overall or low value of specific inorganics.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Polymer, Additives, and Processing Effects on N95 Filter Performance

The current severe acute respiratory syndrome coronavirus 2 (SARS-COV-2) pandemic has highlighted the need for personal protective equipment, specifically filtering facepiece respirators like N95 masks. While it is common knowledge that polypropylene (PP) is the industry standard material for filtration media, trial and error is often required to identify suitable commercial precursors for filtration media production. This work aims to identify differences between several commercial grades of PP and demonstrate the development of N95 filtration media with the intent that the industry partners can pivot and help address N95 shortages. Three commercial grades of high melt flow index PP were melt blown at Oak Ridge National Laboratory and broadly characterized by several methods including differential scanning calorimetry (DSC), X-ray diffraction (XRD), and neutron scattering. Despite the apparent similarities (high melt flow and isotacticity) between PP feedstocks, the application of corona charging and charge enhancing additives improve each material to widely varying degrees. From the analysis performed here, the most differentiating factor appears to be related to crystallization of the polymer and the resulting electret formation. Materials with higher crystallization onset temperatures, slower crystallization rates, and larger number of crystallites form a stronger electret and are more effective at filtration.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrochemical Recovery of Iron from Spent Pickle Liquor by Chloride-Based Molten Salt Electrolysis

Spent pickle liquor (SPL) is a waste stream generated in the steel industry that presents both a disposal challenge and a potential resource for metal recovery. This study investigates the electrochemical extraction of high-purity iron metal from SPL using chloride-based molten salt electrolysis (CMSE). Electrochemical characterization of diluted SPL confirmed Fe 2+ as the dominant species. Thermal dehydration of SPL under inert atmosphere yielded FeCl 2 -rich solids, which were directly employed as feedstock for electrolysis in LiCl–KCl eutectic melts at 500 °C. Cyclic voltammetry of FeCl 2 in this melt revealed well-defined Fe 2+ /Fe 0 redox behavior within the electrochemical stability window of the supporting electrolyte. High coulombic efficiency (>85%) electrodeposition was achieved demonstrating that iron metal can be produced from dehydrated SPL by CMSE. The electrodeposited iron exhibited >98 wt% purity, which was further enhanced to 99.9 wt% via arc melting. The resulting iron powder was ferromagnetic, and its size distribution was found to be suitable for powder metallurgy applications. This work demonstrates a scalable, energy-efficient pathway for valorizing SPL into high-purity iron metal, advancing circular economy strategies in the steel industry.

Materials science↗
DOE OSTI2023

An operando synchrotron study on the effect of wire melting state on solidification microstructures of Inconel 718 in wire-laser directed energy deposition

Directed energy deposition (DED) with a coaxial wire-laser configuration has gained significant attention in recent years for the production of large-scale metallic components because of its low directional dependence, fast deposition rate, high feedstock efficiency, and low manufacturing costs. This work studies the coaxial wire-laser DED process of Inconel 718 alloy under a stable deposition condition with a relatively low input volumetric energy density (55.5J/mm 3 ). Post characterization reveals a cluster of refined grains at the center-bottom region of the as-printed track. Operando high-energy synchrotron X-ray experiments and multi-physics modeling are applied innovatively to study the fundamental mechanism responsible for the formation of this microstructure. The X-ray diffraction experiment provides direct evidence, which is supported by the simulation, that the feeding wire can reach the melt pool bottom and release solid particles (primarily carbides) near the mushy zone owing to insufficient melting. Consequently, these sub-micron sized particles suppress the growth of large columnar grains and cause the formation of unique microstructural heterogeneity. In conclusion, this discovery offers new opportunities for tailoring the solidification microstructure by controlling the melting state of the feedstock wire in DED process, in addition to commonly known factors such as the thermal gradient and solidification velocity.

42 ENGINEERING↗
DOE OSTI2021

Middle Kittanning Coal Waste and Underclay as an Alternative Rare Earth Elements Feedstock

In order to secure domestic sources of rare earth elements (REE) from coal related materials, there must be validation of representative feedstocks. Actively producing coal mines that target the Middle Kittanning coal seam in the Appalachian Basin were compiled. These mines were cross-referenced with publicly available geochemical data such as the U.S. Geological Survey (USGS) Earth Mapping Resources Initiative geochemical data along with samples evaluated and characterized by the National Energy Technology Laboratory (NETL). This work evaluated the extent of elevated Middle Kittanning underclay concentrations of REE in comparison to other underclay formations. Therefore, further up-scaling of research associated with the separation and extraction of REE and other critical minerals can be beneficial to utilizing domestic REE supplies for various technology sectors, to include energy, biomedical, and defense. Numerous current active mines targeting the Middle Kittanning coal seam represent a geographically significant opportunity for shared feedstocks and collaborations to further understand the role of Middle Kittanning underclay as a critical mineral feedstock.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

BETO 2021 Peer Review - Waste Carbon Gas Upgrading via Acetogens 2.3.2.106

Waste carbon gas represents a large and diverse set of feedstocks that could be captured and turned into useful products. This includes waste gas emitted from industrial activity, syngas from burned plant biomass or processed municipal waste, and electrochemical reduction of CO2. Currently, carbon gas is being microbially converted to ethanol as a main product. However, ethanol is a lower value product with a limited market size. While these microbes can make other higher value products, there are no commercial processes for generating these other products, leaving a gap in understanding potential implementation for commercialization. Expanding the products microbially produced from waste carbon gas requires several steps before commercial implementation. We are studying the acetogen Clostridium ljungdahlii as a biocatalyst to convert waste carbon gas to the chemical 3-hydroxybutyrate (3HB), a plastic monomer and fuel precursor. For that, we are studying and engineering microbial characteristics for novel 3HB product formation from waste gas streams. This includes metabolic characterization, genetic engineering, gas fermentation scaling, as well as technoeconomic and life cycle analysis.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Characterizing material transitions in large-scale Additive Manufacturing

Integrating Multiple Materials (MM) into large-scale Additive Manufacturing (AM) is a key for various industrial applications wishing to incorporate site-specific properties into geometrically complex designs that are difficult to manufacture with traditional techniques. Printing with multiple materials is typically accomplished by using layers as natural material boundaries, but having the capability to switch between materials within a single layer without pausing would further expand MM possibilities. This study used Cincinnati Incorporated’s Big Area Additive Manufacturing (BAAM) system to explore material transitions with a novel dual-hopper that enables in-situ material blending of a pelletized feedstock. Constructing MM and functionally graded material (FGM) structures requires depositing a specific material composition at a specific geometric location to achieve a desired performance. Furthermore, accurately implementing this with the BAAM’s blended extrusion system requires a thorough understanding of the transition between distinct material compositions. This study characterizes a step-change transition between neat acrylonitrile butadiene styrene (ABS) and carbon fiber-reinforced ABS. Three distinct techniques were compared for analyzing the fiber content, and the transition zone between materials was characterized as a function of transition direction. The transition process was consistent to within 0.7 wt% carbon fiber variation between different layers and prints. The transition between materials was found to be directionally dependent, with ABS to CF/ABS having a transition length of 3.5 m compared to 3.2 m for CF/ABS to ABS. Furthermore, the transition from Material A to Material B was found to be repeatable with a possible variance in transition length of 0.3 m.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Enabling Particulate Materials Processing Science for High-Consequence, Small-Lot Precision Manufacturing

This Laboratory Directed Research and Development project developed and applied closely coupled experimental and computational tools to investigate powder compaction across multiple length scales. The primary motivation for this work is to provide connections between powder feedstock characteristics, processing conditions, and powder pellet properties in the context of powder-based energetic components manufacturing. We have focused our efforts on multicrystalline cellulose, a molecular crystalline surrogate material that is mechanically similar to several energetic materials of interest, but provides several advantages for fundamental investigations. We report extensive experimental characterization ranging in length scale from nanometers to macroscopic, bulk behavior. Experiments included nanoindentation of well-controlled, micron-scale pillar geometries milled into the surface of individual particles, single-particle crushing experiments, in-situ optical and computed tomography imaging of the compaction of multiple particles in different geometries, and bulk powder compaction. In order to capture the large plastic deformation and fracture of particles in computational models, we have advanced two distinct meshfree Lagrangian simulation techniques: 1.) bonded particle methods, which extend existing discrete element method capabilities in the Sandia-developed , open-source LAMMPS code to capture particle deformation and fracture and 2.) extensions of peridynamics for application to mesoscale powder compaction, including a novel material model that includes plasticity and creep. We have demonstrated both methods for simulations of single-particle crushing as well as mesoscale multi-particle compaction, with favorable comparisons to experimental data. We have used small-scale, mechanical characterization data to inform material models, and in-situ imaging of mesoscale particle structures to provide initial conditions for simulations. Both mesostructure porosity characteristics and overall stress-strain behavior were found to be in good agreement between simulations and experiments. We have thus demonstrated a novel multi-scale, closely coupled experimental and computational approach to the study of powder compaction. This enables a wide range of possible investigations into feedstock-process-structure relationships in powder-based materials, with immediate applications in energetic component manufacturing, as well as other particle-based components and processes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Current status of anaerobic digestion of food waste in the United States

Utilization of food waste (FW) and food processing waste streams in waste-to-energy technologies has increased over the years in United States (US). This review paper compiled information from published literature and open data sources to obtain a holistic view of the current state of FW availability and its management using anaerobic digestion (AD). The review examined the usage of FW as a feedstock for AD by considering the feedstock composition and availability of FW in the US as well as challenges and opportunities with implementing FW in mono- and co-digestion. Also presented are global trends in FW digestion and the current status of FW codigestion in the US. FW in the US was characterized with regard to volume and composition to show a need for waste management and an opportunity for valuable resource recovery. Challenges and opportunities of processing via AcoD were presented to review best practices for successful operations. Environmental standards, economic incentives, and governmental policies in the US and around the world regarding waste management and utilization were discussed to identify barriers and sources of opportunity for large-scale implementation of AcoD. Additionally, a range of facilities throughout the US was examined for information regarding digestion type, feedstock (s), biogas production and utilization, and energy self-sufficiency to better understand the current status of FW digestion. Several US facilities were outlined as case studies that co-digest FW and produce and utilize biogas for various applications. Future strategies, perspectives, and roadmaps were discussed to elucidate the shaping of future FW management practices.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Genetic characterization of a Sorghum bicolor multiparent mapping population emphasizing carbon-partitioning dynamics

Sorghum bicolor, a photosynthetically efficient C4 grass, represents an important source of grain, forage, fermentable sugars, and cellulosic fibers that can be utilized in myriad applications ranging from bioenergy to bioindustrial feedstocks. Sorghum’s efficient fixation of carbon per unit time per unit area per unit input has led to its classification as a preferred biomass crop highlighted by its designation as an advanced biofuel by the U.S. Department of Energy. Due to its extensive genetic diversity and worldwide colonization, sorghum has considerable diversity for a range of phenotypes influencing productivity, composition, and sink/source dynamics. To dissect the genetic basis of these key traits, we present a sorghum carbon-partitioning nested association mapping (NAM) population generated by crossing 11 diverse founder lines with Grassl as the single recurrent female. By exploiting existing variation among cellulosic, forage, sweet, and grain sorghum carbon partitioning regimes, the sorghum carbon-partitioning NAM population will allow the identification of important biomass-associated traits, elucidate the genetic architecture underlying carbon partitioning and improve our understanding of the genetic determinants affecting unique phenotypes within Poaceae. We contrast this NAM population with an existing grain population generated using Tx430 as the recurrent female. Genotypic data are assessed for quality by examining variant density, nucleotide diversity, linkage decay, and are validated using pericarp and testa phenotypes to map known genes affecting these phenotypes. We release the 11-family NAM population along with corresponding genomic data for use in genetic, genomic, and agronomic studies with a focus on carbon-partitioning regimes.

multiparental populations↗
DOE OSTI2024

Mechanical and biochemical recovery of landfill waste in an underserved community

Historically in the United States, waste collected for recycling has been sold and shipped to processors in China. In 2013 and 2018, China introduced the Green Fence and National Sword policies which restricts the import of contaminated materials and banned the import of many recyclables. The cost of recycling in the United States has increased following these policy changes, which has led to many communities reducing their recycling programs or halting them altogether. Rural and underserved communities that don’t have resources to afford sophisticated recycling programs have been heavily impacted. Previous work at INL demonstrated that MSW is a potentially viable feedstock for both biochemical and thermochemical conversion. The goal of this project is to assess preprocessing tools that can produce consistent feedstocks that meet conversion specifications, remove problematic contaminants, and reduce the amount of waste that is landfilled. Municipal solid waste was collected from an underserved community in southeast Idaho, contaminants were characterized, and mechanically separated into two discrete fractions. The unit operations identified during mechanical separation trials will be mobilized to on-site with a goal of 50% recovery of paper and plastic waste.

09 - BIOMASS FUELS↗
DOE OSTI2020

Insights into Mechanisms of Screw Feeder Plugging by Heated Pine Forestry Residues Using in-situ and Correlative Microscopy

Increasing concerns about global carbon emissions due to fossil fuel use has created interest in renewable fuel alternatives, such as lignocellulosic biomass. With an estimated global biomass production probability ten-fold higher than projected need, functionalizing and scaling biomass conversion processes, like pyrolysis, is a promising component of a diverse sustainable energy program (Kan, Strezov, & Evans, 2016). Pyrolysis reactors employed in biomass conversion often encounter the known problem of screw feeder plugging, halting work and reducing efficiency of biorefineries. Although the screw feeder is not heated directly, conductive heat transfer from the fluidized bed pyrolysis reactor creates a temperature gradient, where particles experience temperatures between 22°C and 500°C from the time they enter the feeder to being emptied into the reactor (Digman, Joo, & Kim, 2009; Nieminen & Folke, 1982). The impact of unintentional heating on this highly variable feedstock may result in particle morphology modification, surface texture transformation, and the evolution of viscous compounds and may contribute to screw feeder plugging (Haas, Nimlos, & Donohoe, 2009; Ingram et al., 2008). We hypothesized that particles of various anatomical fractions (including needles, branches, bark, cambium, and whitewood) will experience dramatic changes during this heating regime, which will be characterized by decreased particle size, increased surface roughness, degradation of key structural macromolecules, and generation of viscous compounds that would result in increased particle friction and cohesion, contributing to screw feeder plugging.

biofuels↗
DOE OSTI2020

Mechanical Characterization of High-Temperature Carbon Fiber-Polyphenylene Sulfide Composites for Large Area Extrusion Deposition Additive Manufacturing

Additive manufacturing (AM) is evolving from rapid prototyping to production of structural components. The widespread application of AM demands a high level of mechanical performance from these components, and it is therefore essential to improve feedstock material in order to meet these mechanical expectations. However, compared to traditional manufacturing techniques, the mechanical properties of AM materials and their resulting components are not well understood. In this study, we investigated the processability, microstructure, and mechanical performance of twin-screw compounded short carbon fiber reinforced polyphenylene sulfide (PPS) pellets as a feedstock material for big area AM (BAAM). The performance of the AM components was compared to that of traditional processing methods, namely injection molding (IM) and extrusion-compression molding (ECM). It was found that the AM composites exhibited 118% lower tensile strength and 55% lower tensile modulus when compared to traditional injection molding composite specimens; however, AM composites exhibited comparable properties to ECM composites. This response was attributed to highly aligned fibers in IM and AM samples. However, the AM composites contained porosity (15.5% volume), which reduced their mechanical properties in comparison to ECM composites. Finally, the IM process showed the maximum amount of fiber attrition with minimum porosity (0.007% volume), while the ECM process exhibited the least fiber attrition with 4.3% volume porosity.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Host analysis-guided selection and targeted engineering (HASTE) of Lipomyces tetrasporus for the conversion of CO2-derived feedstocks

Efficient and cost-competitive bioproduction calls for utilizing CO2-derived feedstocks, such as products from electro-reduction of CO2 and hydrolysate from lignocellulosic biomass. However, efficiently using all their carbon components, including acetate, glucose, and xylose, remains a challenge. Here, we characterize Lipomyces tetrasporus, a novel, robust yeast strain capable of effectively assimilating these carbon sources. We used an integrated systems biology approach combining ¹³C metabolic flux analysis, dynamic labeling experiments, and RNA sequencing. We conducted the first metabolic flux analysis for glucose, xylose, and acetate catabolism in this species. Dynamic labeling revealed a highly active TCA cycle during acetate metabolism, evidenced by rapid citrate and malate accumulation. The strain demonstrated strong NADH/NADPH production and acetyl-CoA synthase activity. Using insights and gene targets from this analysis, we engineered L. tetrasporus for malate production. The engineered strain produced 7.5 g/L malic acid (0.25 g/g yield) in shake flasks with glucose-acetate media and 28.8 g/L malic acid at a yield of 0.20 g/g in fed-batch mode with corn-stover hydrolysate. Together, these insights and rational strain engineering establish L. tetrasporus as a versatile, Crabtree-negative platform that is an energy-CO2-bioproduction nexus for channeling CO2 carbon into value-added bioproducts.

Xiao, Zhengyang↗
DOE OSTI2020

Chemical and Structural Changes in Corn Stover After Ensiling: Influence on Bioconversion

Production of biofuels, bioproducts, and bioenergy requires a well-characterized, stable, and reasonably uniform biomass supply and well-established supply chains for shipping biomass from farm fields to biorefineries, while achieving year-round production targets. Preserving and stabilizing biomass feedstock during storage is a necessity for cost-effective and sustainable biofuel production. Ensiling is a common storage method used to preserve and even improve forage quality; however, the impact of ensiling on biomass physical and chemical properties that influence bioconversion processes has been variable. Our objective in this work was to determine the effects of ensiling on lignocellulosic feedstock physicochemical properties and how that influences bioconversion requirements. We observed statistically significant decreases (p < 0.05) in the content of two major structural carbohydrates (glucan and xylan) of 5 and 8%, respectively, between the ensiled and non-ensiled materials. We were unable to detect differences in sugar yields from structural carbohydrates after pretreatment and enzymatic hydrolysis of the ensiled materials compared to non-ensiled controls. Based on this work, we conclude that ensiling the corn stover did not change the bioconversion requirements compared to the control samples and incurred losses of structural carbohydrates. At the light microscopy level, ensiled corn stover exhibited little structural change or relocation of cell wall components as detected by immunocytochemistry. However, more subtle structural changes were revealed by electron microscopy, as ensiled cell walls exhibit ultrastructural characteristics such as wall delimitation intermediate between non-ensiled and dilute-acid-pretreated cell walls. These findings suggest that alternative methods of conversion, such as deacetylation and mechanical refining, could take advantage of lamellar defects and may be more effective than dilute acid or hot water pretreatment for biomass conversion of ensiled materials.

09 BIOMASS FUELS↗
DOE OSTI2024

Novel Microbial Routes to Synthesize Industrially Significant Precursor Compounds

Ethylene is the most widely employed organic precursor compound in industry. The potential to impact ethylene formation via recently discovered microbial processes is tenable using plentiful CO2 feedstocks. The overall long-term objective of this project was to develop an industrially compatible microbial process to synthesize ethylene in high yields. The key objective of this project was to fully define and initially characterized a recently discovered and genetically regulated anaerobic pathway to produce high levels of ethylene called the Dihydroxyacetone Phosphate - Ethylene Pathway in phototrophic bacteria. This was addressed through the following specific aims: 1. Fully probe the catalytic potential of all enzymes of the DHAP ethylene pathway and determine the regulatory mechanism of DHAP-ethylene pathway gene expression. 2. Discover effective and active ethylene enzymes encoded in cultured and uncultured organisms from anoxic environments. 3.Model the thermodynamics and kinetics of ethylene synthetic pathways to guide engineering efforts in integrating best performing DHAP-ethylene pathway enzymes into model bacteria chassis for enhance ethylene yields. Through this project we discovered the initially missing genetic and enzyme component of the DHAP-ethylene pathway that directly synthesized ethylene and other important industrial compounds like methane and ethane from specific substrates. We uncovered and partially characterized a nitrogenase-like reductase that functions in DHAP-ethylene pathway specifically and in methionine synthesis in general. This nitrogenase-like system is called the Methylthio-Alkane Reductase (MAR) for its ability to cleave volatile organic sulfur compounds into methanethiol (CH3-SH) for methionine synthesis and a hydrocarbon byproduct. Key to the DHAP-ethylene pathway, MAR is the essential enzyme that cleaves 2-methylthioethanol (CH3-S-CH2-CH2-OH) into ethylene. Coordinately, we uncovered that the MAR genes and genes associated with conversion of methanethiol (CH3-SH) to methionine are under genetic control of a LysR Type Transcriptional Regulator called SalR, whose activity is dependent upon the amount of sulfate available to the cell. When sulfate as the preferred sulfur source for cell growth drops below 200 micromolar, SalR become active for expressing the MAR and methionine biosynthesis genes to enable the cell to grow from volatile organic sulfur compounds and make ethylene. Metabolic thermos-kinetic modeling revealed that these MAR reactions for ethylene and other hydrocarbon production are highly thermodynamically favorable and are one of the largest driving forces for ethylene production by the DHAP-ethylene pathway for high ethylene yields. Modeling also indicated that a key aldolase and to a lesser extent an isomerase of the DHAP-ethylene pathway for production of the ethylene precursor, 2-methylthioethanol, also would increase ethylene yields. Through metagenomic mining and gene synthesis by the JGI DNA synthesis program, over 500 aldolase and isomerase homologs were synthesized and screened. From this, variants were uncovered with substantially higher activity that increased ethylene yields 5-fold via the aldolase reaction and 1.5-fold via the isomerase reaction. Each of these elements that increase ethylene production were integrated together via plasmid under appropriate gene promoter elements in the phototrophic bacterium, Rhodospirillum rubrum, resulting in at least 3 orders of magnitude increase in ethylene yield from carbon dioxide feedstock.

10 SYNTHETIC FUELS↗