Search NASA⌕ Search

SEARCH · Search NASA

Results for “ferroelectric domains”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Nanoscale Ferroelectric Control of Novel Electronic States in Layered Two-Dimensional Materials (Final Report)

In this DOE Early Career project “Nanoscale Ferroelectric Control of Novel Electronic States in Layered Two-Dimensional Materials,” the PI’s group has combined ferroelectric field effect with nanoscale domain imaging and writing to design the electronic and optical properties of two-dimensional (2D) van der Waals materials, including graphene and transition metal dichalcogenides MoS2 and ReS2. The van der Waals materials have been prepared into field effect transistor (FET) devices with ferroelectric gates. Through domain patterning in a ferroelectric polymer PVDF-TrEF top-gate via conductive atomic force microscopy, the team has created programmable Schottky junctions in monolayer MoS 2 , where both barrier height and I-V rectifying polarity can be reconfigured. The transport anisotropy of monolayer to few-layer ReS 2 has been mapped out by defining the entire channel into an insulating state and creating nanoscale conducting paths along different directions through domain writing in the ferroelectric top-gate. The result shows that the conductivity along and perpendicular to the Re-chain can differ by >5.5x10 4 . Theoretical modeling points to the band origin of the transport anomaly and reveals the emergence of a flat band in few-layer ReS 2 . The interfacial epitaxial relation between ReS 2 and PVDF-TrFE further promotes the formation of close-packed, highly ordered PVDF-TrFE nanowires with width of 35 nm and 10 nm. Nonvolatile modulation of quantum Hall effect has been achieved in graphene FETs with a ferroelectric oxide Ba 0.4 Sr 0.6 TiO 3 back-gate. Scattering from the remote surface optical phonon in Ba 0.4 Sr 0.6 TiO 3 limits the room temperature mobility of graphene to be about 3x10 4 cm 2 /Vs. Steep-slope switching has been achieved in MoS 2 FETs back-gated by polycrystalline Pb(Zr,Ti)O 3 , which signals a static-state negative capacitance mode without involving an additional dielectric layer. Piezoresponse force microscopy studies show that the sub-threshold swing can be well correlated with the domain wall density in Pb(Zr,Ti)O 3 . The team also observes an unconventional filtering effect of the second harmonic generation response at the MoS 2 /Pb(Zr,Ti)O 3 heterointerface, which can be accounted for by the alignment between one of the polar axes of MoS 2 and the chiral dipole rotation at the surface of domain wall in Pb(Zr,Ti)O 3 . The research supported by this DOE grant has significantly advanced the fundamental understanding and functional design of ferroelectric/2D van der Waals heterostructures for their implementation towards energy applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Disentangling Ferroelectric Wall Dynamics and Identification of Pinning Mechanisms via Deep Learning

Field-induced domain-wall dynamics in ferroelectric materials underpins multiple applications ranging from actuators to information technology devices and necessitates a quantitative description of the associated mechanisms including giant electromechanical couplings, controlled nonlinearities, or low coercive voltages. While the advances in dynamic piezoresponse force microscopy measurements over the last two decades have rendered visualization of polarization dynamics relatively straightforward, the associated insights into the local mechanisms have been elusive. This work explores the domain dynamics in model polycrystalline materials using a workflow combining deep-learning-based segmentation of the domain structures with nonlinear dimensionality reduction using multilayer rotationally invariant autoencoders (rVAE). The former allows unambiguous identification and classification of the ferroelectric and ferroelastic domain walls. Here, the rVAE discovers the latent representations of the domain wall geometries and their dynamics, consequently providing insight into the intrinsic mechanisms of polarization switching, that can further be compared to simple physical models. The rVAE disentangles the factors affecting the pinning efficiency of ferroelectric walls, offering insights into the correlation of ferroelastic wall distribution and ferroelectric wall pinning.

36 MATERIALS SCIENCE↗
DOE OSTI2024

On-demand nanoengineering of in-plane ferroelectric topologies

Hierarchical assemblies of ferroelectric nanodomains, so-called super-domains, can exhibit exotic morphologies that lead to distinct behaviours. Controlling these super-domains reliably is critical for realizing states with desired functional properties. Here we reveal the super-switching mechanism by using a biased atomic force microscopy tip, that is, the switching of the in-plane super-domains, of a model ferroelectric Pb 0.6 Sr 0.4 TiO 3 . We demonstrate that the writing process is dominated by a super-domain nucleation and stabilization process. A complex scanning-probe trajectory enables on-demand formation of intricate centre-divergent, centre-convergent and flux-closure polar structures. Correlative piezoresponse force microscopy and optical spectroscopy confirm the topological nature and tunability of the emergent structures. The precise and versatile nanolithography in a ferroic material and the stability of the generated structures, also validated by phase-field modelling, suggests potential for reliable multi-state nanodevice architectures and, thereby, an alternative route for the creation of tunable topological structures for applications in neuromorphic circuits.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Flexosensitive polarization vortices in thin ferroelectric films

In this work, we present a theoretical study on the influence of the flexoelectric coupling on the spatial distribution and temperature behavior of the spontaneous polarization for several types of stable domain structure in thin ferroelectric films, such as stripe domains and vortices. Finite-element modeling (FEM) for BaTiO 3 films and analytical calculations within the Landau-Ginzburg-Devonshire approach reveals that an out-of-plane polarization component can be very sensitive to the flexoelectric coupling for periodic quasi-2D stripe domains and 3D vortex-antivortex structures. However, the influence is rather different for these structures. The flexoelectric coupling increases significantly the amplitude of a small out-of-plane polarization component in the stripe domains, and the “up” or “down” direction of the component is defined by the sign of the flexoelectric coefficients. Concerning the vortex-antivortex pairs, their antivortices with in-plane antiсirculation have smooth wide dipolar cores through the entire film, whose shape and other features are almost insensitive to the coupling. The vortices with in-plane vorticity have spikelike cores with an out-of-plane quadrupolar moment induced by the flexoelectric coupling. The cores are located near the film–dead-layer interfaces. FEM results corroborated by analytical calculations prove that a change of the flexoelectric coefficient sign leads to a reorientation of the core axial polarization, making the flexosensitive 3D vortices similar to the recently introduced “flexons” in cylindrical nanoparticles. The relatively wide temperature range (from 200 to 400 K) of the flexosensitive vortices' existence gives us confidence that they can be observed experimentally in thin ferroelectric films by scanning-probe and nonlinear optical microscopy methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Computing diffraction patterns of microstructures from phase-field simulations

The diffraction pattern of a material contains information not only on the crystal structures of its constituting phases, but also on its mesoscale spatial distributions of phases, grains, and ferroelastic, ferroelectric, and ferromagnetic domains. While diffraction patterns from experiments such as X-ray diffraction are presented in the reciprocal or Fourier space, mesoscale microstructure models such as the phase-field method naturally produce real-space images of spatial distribution of chemical composition, structural, and ferroic domains. Although one could rather readily compute the Fourier amplitudes of chemical and structural domain distributions generated by mesoscale simulations, they only contain information about the length scale and alignment of the real-space chemical and structure domains. Therefore, a direct comparison between diffraction experiments and mesoscale microstructure simulations is not possible. Here, we develop a theoretical approach to directly compute the crystal diffraction patterns of microstructures predicted by phase-field simulations. In particular, we consider five representative examples of microstructure patterns involving purely compositional domains, a single pair of tetragonal twin structures, multiple twin variants in a hexagonal system, ferroelectric polar vortices, and polycrystalline grains. The results are compared with previous experimental observations as well as X-ray diffraction experiments performed in the present study. Furthermore, the theoretical framework allows one to directly connect material microstructures and diffraction patterns predicted from phase-field simulations and the corresponding diffraction patterns from experiments, and thus providing guidance to experimental diffraction characterization and interpretation of microstructures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The Interplay Between Ferroelectricity and Electrochemical Reactivity on the Surface of Binary Ferroelectric Al x B 1–x N

Polarization dynamics and domain structure evolution in ferroelectric Al 0.93 B 0.07 N are studied using piezoresponse force microscopy and spectroscopies in ambient and controlled atmosphere environments. The application of negative unipolar and bipolar first-order reverse curve (FORC) waveforms leads to a protrusion-like feature on the Al 0.93 B 0.07 N surface and a reduction of electromechanical response due to electrochemical reactivity. A surface change is also observed on the application of fast alternating current bias. At the same time, the application of positive biases does not lead to surface changes. Comparatively in a controlled glove box atmosphere, stable polarization patterns can be observed, with minuscule changes in surface morphology. This surface morphology change is not isolated to applying biases to free surface, a similar topographical change is also observed at the electrode edges when cycling a capacitor in an ambient environment. The study suggests that surface electrochemical reactivity may have a significant impact on the functionality of this material in the ambient environment. However, even in the controlled atmosphere, the participation of the surface ions in polarization switching phenomena and ionic compensation is possible.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Enhanced domain dynamics in alternating current poled rhombohedral Pb(Mg 1/3 Nb 2/3 )O 3 –PbTiO 3 single crystals

Abstract The understanding of domain dynamics in ferroelectric materials is crucial for optimizing their performance in piezoelectric and electro‐optic applications. Although previous studies have focused on static domain structures and macroscopic characteristics, the time‐resolved approach of domains remains largely unexplored. In this study, we compare the dynamic responses of direct current (DC) and alternating current (AC) poled [001]‐oriented rhombohedral Pb(Mg 1/3 Nb 2/3 )O 3 –PbTiO 3 (PMN–PT) single crystals using X‐ray photon correlation spectroscopy (XPCS) during the application of external electric fields. Our results demonstrate that the AC‐poled sample exhibit enhanced reconfiguration of domain variants in response to driving fields compared to the DC‐poled counterpart, as evidenced by accelerated correlation decay and faster relaxation time. This phenomenon is attributed to enhanced reversible domain wall motion achieved through AC poling, which facilitates field‐induced domain realignment. These findings provide insight into the relationship between dynamics and macroscopic properties in relaxor‐PT single crystals for high‐performance applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Domain wall motion across microstructural features in polycrystalline ferroelectric films

This paper describes the effect of microstructural features such as grain boundaries and triple points on the pinning of domain wall motion in perovskite Pb(Zr 0.52 Ti 0.48 )O 3 (PZT) films on polycrystalline SrRuO 3 /SrTiO 3 substrates. Here, spatial variability in the collective domain wall dynamics was assessed using non-linearity mapping via Band Excitation Piezoresponse Force Microscopy (BE-PFM). Collocating the non-linearity maps with triple point locations (as visualized by EBSD) allowed for exploration of the effects that local microstructure (e.g., grain boundary) have on domain wall motion. It was found that the extrinsic behavior varied with both the misorientation angle and the proximity to the grain boundary. The width of influence of individual grain boundaries on the motion of domain walls was a function of the character of the grain boundary; random grain boundaries exhibit deeper minima in α d /d 33,initial and larger widths of influence (up to 905 nm) compared to coincident site lattice (CSL) boundaries (up to 572 nm). Additionally, triple points containing larger numbers of random boundaries exhibited non-Rayleigh behavior to greater distances, suggesting that the triple point provides either a deep potential minimum or a region where domain wall motion is unfavorable.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Scan‐Path‐ and Initial‐State‐Dependent Superdomain Switching in (111)‐Oriented PZT

Polarization switching in ferroelectric materials arises from the collective evolution of complex domain hierarchies, yet deterministic control over these processes remains challenging. Here, we investigate scan-path- and initial-state-dependent switching in epitaxial (111)-oriented PbZr 0.2 Ti 0.8 O 3 thin films using automated AFM-based writing combined with quantitative 3D piezoresponse force microscopy. We show that the scan trajectory acts as an experimentally accessible control parameter for superdomain formation. Box-in-box raster scans reproducibly stabilize ordered stripe superdomains with a reduced subset of symmetry-allowed variants, whereas spiral trajectories generate frustrated mixed-variant states with a broader distribution of final microstructures. Automated pulsing experiments further show that the local superdomain configuration at the nucleation site strongly influences the final written morphology. Phase-field modeling qualitatively reproduces the contrast between representative initial-state geometries and supports the role of compatibility constraints among competing ferroelastic pathways. These findings establish scan-path and initial-state engineering as practical handles to program ferroic order in hierarchical ferroelectric domain structures.

Vasudevan, Rama K. [Oak Ridge National Laboratory ↗
DOE OSTI2021

Tunable Microwave Conductance of Nanodomains in Ferroelectric PbZr 0.2 Ti 0.8 O 3 Thin Film

Ferroelectric materials exhibit spontaneous polarization that can be switched by electric field. Beyond traditional applications as nonvolatile capacitive elements, the interplay between polarization and electronic transport in ferroelectric thin films has enabled a path to neuromorphic device applications involving resistive switching. A fundamental challenge, however, is that finite electronic conductivity may introduce considerable power dissipation and perhaps destabilize ferroelectricity itself. In this work, tunable microwave frequency electronic response of domain walls injected into ferroelectric lead zirconate titanate (PbZr 0.2 Ti 0.8 O 3 ) on the level of a single nanodomain is revealed. Tunable microwave response is detected through first-order reversal curve spectroscopy combined with scanning microwave impedance microscopy measurements taken near 3 GHz. Contributions of film interfaces to the measured AC conduction through subtractive milling, where the film exhibited improved conduction properties after removal of surface layers, are investigated. Using statistical analysis and finite element modeling, we inferred that the mechanism of tunable microwave conductance is the variable area of the domain wall in the switching volume. These observations open the possibilities for ferroelectric memristors or volatile resistive switches, localized to several tens of nanometers and operating according to well-defined dynamics under an applied field.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Domain-dependent strain and stacking in two-dimensional van der Waals ferroelectrics

Van der Waals (vdW) ferroelectrics have attracted significant attention for their potential in next-generation nano-electronics. Two-dimensional (2D) group-IV monochalcogenides have emerged as a promising candidate due to their strong room temperature in-plane polarization down to a monolayer limit. However, their polarization is strongly coupled with the lattice strain and stacking orders, which impact their electronic properties. Here, we utilize four-dimensional scanning transmission electron microscopy (4D-STEM) to simultaneously probe the in-plane strain and out-of-plane stacking in vdW SnSe. Specifically, we observe large lattice strain up to 4% with a gradient across ~50 nm to compensate lattice mismatch at domain walls, mitigating defects initiation. Additionally, we discover the unusual ferroelectric-to-antiferroelectric domain walls stabilized by vdW force and may lead to anisotropic nonlinear optical responses. Our findings provide a comprehensive understanding of in-plane and out-of-plane structures affecting domain properties in vdW SnSe, laying the foundation for domain wall engineering in vdW ferroelectrics.

42 ENGINEERING↗
DOE OSTI2025

Tip-based proximity ferroelectric switching and piezoelectric response in wurtzite multilayers

Proximity ferroelectricity is a paradigm for inducing ferroelectricity when a nonferroelectric polar material (such as Al⁢ N), which is unswitchable with an external field below the dielectric breakdown field, becomes a practically switchable ferroelectric in direct contact with a thin switchable ferroelectric layer (such as Al 1−𝑥 ⁢Sc 𝑥 ⁢N). Here, we develop a Landau-Ginzburg-Devonshire approach to study the proximity effect of local piezoelectric response and polarization reversal in wurtzite ferroelectric multilayers under a sharp electrically biased tip. Using finite-element modeling, we analyze the probe-induced nucleation of nanodomains, the features of local polarization hysteresis loops and coercive fields in the Al 1−𝑥 ⁢Sc 𝑥 ⁢N/Al⁢ N bilayers and three-layers. Similar to the wurtzite multilayers sandwiched between two parallel electrodes, the regimes of “proximity switching” (when all layers collectively switch) and the regime of “proximity suppression” (when they collectively do not switch) are the only two possible regimes in the probe-electrode geometry. However, the parameters and asymmetry of the local piezoresponse and polarization hysteresis loops depend significantly on the sequence of the layers with respect to the probe. The physical mechanism of proximity ferroelectricity in the local probe geometry is a depolarizing electric field determined by the polarization of the layers and their relative thickness. The field, whose direction is opposite to the polarization vector in the layer(s) with the larger spontaneous polarization (such as Al⁢ N), renormalizes the double-well ferroelectric potential to lower the steepness of the switching barrier in the “otherwise unswitchable” polar layers. Tip-based control of domains in otherwise nonferroelectric layers using proximity ferroelectricity can provide nanoscale control of domain reversal in memory, actuation, sensing, and optical applications. The ability of the tip-induced proximity switching to differentially switch multilayers, based on the order of the layers, provides a powerful tool for selective domain engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Latent Mechanisms of Polarization Switching from In Situ Electron Microscopy Observations

In situ scanning transmission electron microscopy enables observation of the domain dynamics in ferroelectric materials as a function of externally applied bias and temperature. The resultant data sets contain a wealth of information on polarization switching and phase transition mechanisms. However, identification of these mechanisms from observational data sets has remained a problem due to a large variety of possible configurations, many of which are degenerate. Here, an approach based on a combination of deep learning-based semantic segmentation, rotationally invariant variational autoencoder (VAE), and non-negative matrix factorization to enable learning of a latent space representation of the data with multiple real-space rotationally equivalent variants mapped to the same latent space descriptors is introduced. By varying the size of training sub-images in the VAE, the degree of complexity in the structural descriptors is tuned from simple domain wall detection to the identification of switching pathways. Importantly, this yields a powerful tool for the exploration of the dynamic data in mesoscopic electron, scanning probe, optical, and chemical imaging. Moreover, this work adds to the growing body of knowledge of incorporating physical constraints into the machine and deep-learning methods to improve learned descriptors of physical phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Observability of negative capacitance of a ferroelectric film: Theoretical predictions

Here, we theoretically explore mechanisms that can potentially give rise to the steady-state and transient negative capacitance in a uniaxial ferroelectric film stabilized by a dielectric layer. The analytical expressions for the steady-state capacitance of a single-domain and polydomain states are derived within the Landau-Ginzburg-Devonshire approach and used to study the state stability vs the domain splitting as a function of dielectric layer thickness. Analytical expressions for the critical thickness of the dielectric layer, polarization amplitude, equilibrium domain period, and susceptibility are obtained and corroborated by finite element modeling. Furthermore we explore the possible effects of nonlinear screening by two types of screening charges at the ferroelectric-dielectric interface and show that if at least one of the screening charges is very slow, the total polarization dynamics can exhibit complex time- and voltage-dependent behaviors that can be interpreted as an observable negative capacitance. In this setting, the transient negative capacitance effect is accompanied by almost zero dielectric susceptibility in a wide voltage range and low frequencies. These results may help to elucidate the observation of the transient negative capacitance in thin ferroelectric films, and identify materials systems that can give rise to the behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Optical subpicosecond nonvolatile switching and electron-phonon coupling in ferroelectric materials

Direct optical ferroelectric switching (FE switch) has the advantage of being ultrafast over the traditional FE switch, which relies on domain nucleation and growth. However, how to realize nonvolatility in such an optical FE switch poses a serious challenge. Time-dependent density-functional theory molecular dynamics study reveals that subpicosecond nonvolatile FE switches can be realized in GeTe and PbTiO 3 . Here, while optical tuning of the transition barrier and initiation of a directional atomic motion are crucial, the dephasing of the excited state holds the key for the realization of nonvolatility.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spontaneous Polarization in an Ultrathin Improper-Ferroelectric/Dielectric Bilayer in a Capacitor Structure at Cryogenic Temperatures

To determine the effect of depolarization and the critical thickness in improper-ferroelectric hexagonal-ferrite thin films, we investigate the polarization switching of a ferroelectric/dielectric bilayer in capacitor structures at 20 K. Experimentally, we show that the spontaneous polarization persists throughout the studied thickness range (3 to 80 unit cell), even with a thick (10-nm) dielectric layer, suggesting no practical thickness limit for applications. By fitting the effect of depolarization using the phenomenological theory, we show that the spontaneous polarization remains finite when the thickness of the ferroelectric layer approaches zero, providing a hint for the absence of critical thickness. We also find that the interfacial effects limit the multidomain formation and govern the polarization switching mechanisms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗