Synthesis of High-Performance Monolayer Molybdenum Disulfide at Low Temperature
Not provided.
Chemistry↗
SEARCH · Search NASA
Results for “flake”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Understanding the Role of Zinc Hydroxide Sulfate and its Analogues in Mildly Acidic Aqueous Zinc Batteries: A Review
Abstract Mildly acidic aqueous zinc batteries (AZBs) have attracted tremendous attention for grid storage applications with the expectation to tackle the issues of Li‐ion batteries on high cost and poor safety. However, the performance, particularly energy density and cycle stability of AZBs are still unsatisfactory when compared with LIBs. To help the development of AZBs, a lot of effort have been made to understand the battery reaction mechanisms and precedent microscopic and spectroscopic analyses have shown flake‐like large particles of zinc hydroxide sulfate (ZHS) and its analogues formed on the surfaces of cathodes and anodes in sulfate and other electrolyte systems during cycling. However, because of the complexity of the thermodynamics and kinetics of aqueous reactions to understand different battery conditions, controversies still exist. This article will review the roles of ZHS discussed in recent representative references aiming to shine light on the fundamental mechanisms of AZBs and pave ways to further improve the battery performance.
25 ENERGY STORAGE↗
Processing Compressed Expanded Natural Graphite for Phase Change Material Composites
Phase change materials (PCMs) are used in various thermal energy storage applications but are limited by their low thermal conductivity. One method to increase conductivity involves impregnating organic PCMs into highly porous conductive matrix materials. Of these materials, compressed expanded natural graphite (CENG) matrices have received the most attention. Despite this attention, the effect that CENG processing has on PCM saturation and overall matrix thermal conductivity has not been fully investigated. Therefore, the effect of the heat treatment process used to expand intercalated graphite flakes is evaluated here. Higher heat treatment temperatures yielded higher saturation rates and overall saturation at similar matrix porosities. For example, increasing temperature from 300 °C to 700 °C resulted in approximately 60%-70% increase in pore saturation after 100 minutes of soaking. The exposure time to heat treatment had less of an effect on PCM saturation. The exposure time had negligible effect above 30 min and above 500 °C heating temperatures. However, because the expanded graphite was found to oxidize around 700 °C, the use of longer exposure time in manufacturing applications can be beneficial if a shortened impregnation time is needed. Heat treatment conditions did not impact thermal conductivity. The composite latent heat of fusion was also reduced approximately proportionally to the PCM mass fraction. A local maximum in axial thermal conductivity was observed at around 83% porosity, which is similar to previous studies. The observed conductivity at this maximum was a factor of 81 times greater than the conductivity of the PCM.
36 MATERIALS SCIENCE↗
Hot-Roll Fabrication of Anisotropic Nanograin Nd-Fe-B Magnet
Nd-Fe-B based magnets have the highest energy product among all permanent magnets, which is required for numerous clean energy technologies. For higher temperature applications (T > 150°C), additions of heavy rare earth elements (HREEs) such as Dy are required to maintain sufficient coercivity during operation. Additions of Dy are expensive. Thus, it is desirable to reduce the need for HREEs by reducing the grain size to the nanoscale, which increases the coercivity and decreases its temperature dependence. Here, we report a novel nanograin Nd-Fe-B magnet fabrication method that is continuous and inexpensive. The process uses mechanically milled Nd-Fe-B melt-spun flakes as feedstock powder that is packed into a metal vessel and then hot rolled to form a fully dense and highly textured strip magnet with tailored thicknesses, down to 800 µm. Finally, using this process, fully dense nanograin bulk magnets can be synthesized in minutes compared to the traditional multi-step processes that are typically low throughput.
36 MATERIALS SCIENCE↗
Meshfree simulation and experimental validation of extreme thermomechanical conditions in friction stir extrusion
Abstract Friction stir extrusion (FSE) is a novel solid-phase processing technique that consolidates and extrudes metal powders, flakes, chips, or billets into high-performance parts by plastic deformation, which has the potential to save substantial processing time and energy. Currently, most studies on FSE are experimental and only a few numerical models have been developed to explain and predict the complex physics of the process. In this work, a meshfree simulation framework based on smoothed particle hydrodynamics (SPH) was developed for FSE. Unlike traditional grid-based methods, SPH is a Lagrangian particle-based method that can handle severe material deformations, capture moving interfaces and surfaces, and monitor the field variable histories explicitly without complicated tracking schemes. These aspects of SPH make it attractive for the FSE process, where in situ evolution of field variables is difficult to observe experimentally. To this end, a 3-D, fully thermomechanically coupled SPH model was developed to simulate the FSE of aluminum wires. The developed model was thoroughly validated by comparing the numerically predicted material flow, strain, temperature history, and extrusion force with experimental results for a certain set of process parameters. The validated SPH model can serve as an effective tool to predict and better understand the extreme thermomechanical conditions during the FSE process.
99 GENERAL AND MISCELLANEOUS↗
Solution synthesis of two-dimensional zinc oxide (ZnO)/molybdenum disulfide (MoS 2 ) heterostructure through reactive templating for enhanced visible-light degradation of rhodamine B
Numerous inorganic materials have been identified as potential candidates for high-performance photocatalysts. However, their solar-to-energy conversion efficiencies still fail to meet commercial requirements. Here, the main hurdle is the rapid recombination of photoexcited electrons and holes in single-phase materials. A viable predicted approach to suppress charge recombination is coupling two materials to form a two-dimensional (2D) heterostructure that physically separates photoinduced electrons and holes in different layers. In this work, the heterostructure-based paradigm was tested and a scalable solution synthesis of epitaxial ZnO-MoS 2 heterostructure was developed. A 2D ZnO-MoS 2 heterostructure was synthesized under hydrothermal conditions by stabilizing intermediate Zn-hydroxide states on a functionalized MoS 2 surface. Detailed characterization showed the formation of multilayer heterostructure with MoS 2 flakes intercalated between large size ZnO plates. The performance of this heterostructure was evaluated using photocatalytic degradation of rhodamine B. A degradation efficiency of 70% was measured within 90 minutes of visible-light irradiation, almost doubling the efficiency of the corresponding single-phase materials or their physical mixtures.
2D heterostructure↗
From classical to quantum dynamics of atomic and ionic species interacting with graphene and its analogue
Graphene and its analogues offer a broad range of application opportunities for (opto)-electronics, sensing, catalysis, phase separation, energy conversion and storage, etc. Engineering graphene properties often relies on its controllable functionalization, defect formation and patterning, and reactive gas etching. In this chapter, we survey the dynamics of graphene using classical and quantum-classical dynamics methods. We discuss the reactivity, scattering, and transmission of atomic and ionic species including Ar cluster ion, H/D, and H+/D+ on graphene flakes of various sizes, focusing on the atomic-scale motion and energy dissipation pathways involved in forming and breaking covalent bonding. Discussions on the nuclear quantum effects of light species, the effects of isotopic substitution, and the methodologies for such modeling are also included.
Garashchuk, Sofiya V.↗
Structure-dependent mechanisms for plastic degradation in the marine environment
The visible and invisible accumulation of waste plastic in our oceans is a consequence of rapidly increasing inputs and very slow degradation rates. In general, this combination of effects results in long residence times. Nevertheless, the abiological degradation rate of a specific synthetic plastic varies widely, depending on its structural characteristics at the molecular, mesoscopic, and macroscopic levels. This chapter summarizes factors that determine these rates of degradation, and describes their principal mechanisms, for several of the major types of waste plastic found in the oceans. Mechanical forces cause cracking and flaking that break macroplastics into microplastics and even smaller fragments with increasing surface-to-volume ratios. Chemical degradation rates increase with surface area, influenced by intrinsic variations in crystallinity and the presence of additives, as well as extrinsic factors such as temperature, pH, and UV light intensity. Since polyolefin-based plastics are less dense than seawater and lack hydrolysable bonds in their polymer backbones, they accumulate close to the surface of the ocean where photo-oxidation is the principal cause of C–C bond cleavage in the polymer backbone. In contrast, polyesters and polyamides are denser than seawater and they sink, experiencing less exposure to solar irradiation. However, they can also degrade by slow hydrolysis of the C–O or C–N bonds intrinsic to the polymer structures.
Maciulis, Nicholas A.↗
Nanoparticle-enhanced absorptivity of copper during laser powder bed fusion
We report laser powder bed fusion (LPBF) of pure copper for thermal and electrical applications is hampered by its low near-infrared absorptivity and high thermal diffusivity. These material properties make it very difficult to localize the thermal energy needed to produce high density 3D printed parts. Modification of metal powders via nanoparticle additives is a promising approach to increasing absorptivity, but the effect of nanoparticles on absorptivity and melting behavior during LPBF is not well understood. In this study, we developed an in situ calorimetry system to measure effective absorptivity during LPBF on copper substrates. We decorated copper substrates using three nanoparticle systems (CuS, TiB 2 , multilayer graphene flakes) and demonstrated an enhanced absorptivity of the decorated substrates relative to pure copper. Graphene nanoflakes resulted in the highest improved absorption relative to pure copper from 0.09 to 0.48, due to their stability at high laser scanning powers. A thermomechanical model with convective heat transfer provided confidence in the measurements by reproducing the experimental melt pool traces. Full 3D cylindrical prints demonstrated an improvement in relative density of the copper-graphene powder prints (in the range of 0.930–0.992), relative to that of as-purchased copper powder prints (in the range of 0.854–0.972). This work provides a fundamental study of nanoparticle-enabled LPBF of highly reflective metals and demonstrates a viable route for expanding the library of reliably printable metals.
36 MATERIALS SCIENCE↗
Effects of ion adsorption on graphene oxide films and interfacial water structure: A molecular-scale description
Herein we discuss graphene oxide as a promising, emerging separation material, as it is durable, dispersible in water, and has naturally forming functional groups. Bulk studies using graphene oxide flakes have demonstrated impressive metal adsorption. However, little interfacial information about water and metal organization near graphene oxide is available. A mechanistic understanding of water and ions interactions with graphene oxide films is critical toward advanced separations, including improved sorption efficiency and membrane regeneration. We study metal ion and local water organization near graphene oxide thin films formed at the air/water interface. These films are not typical membranes and allow us to determine nanoscale information about the graphene oxide-water interface. We accomplish this with x-ray reflectivity (XR), x-ray fluorescence near total reflection (XFNTR), and vibrational sum frequency generation spectroscopy (SFG). These interface-specific techniques provide the electron density profile normal to the interface, number of adsorbed ions, and information about the orientational ordering and hydrogen-bonding network of interfacial water, respectively. Via XFNTR and SFG, we find that trivalent yttrium ions preferentially adsorb to graphene oxide and affect its structure, compared to divalent strontium and monovalent cesium ions. Two different interfacial water populations can be described, based on their hydrogen bonding strength, and the adsorbed ions affect these populations differently. These results provide fundamental information about ion and water organization at the interface and help address the large computational-experimental agreement gap for graphene oxide systems. Additionally, they are relevant for improved soft-scaffold graphene oxide membranes and downstream applications.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Optical image analysis of WSe 2 − thresholding for layer detection
The fast and reliable layer identification of two-dimensional transition metal dichalcogenide (TMD), such as WSe 2 , is essential to investigating their thickness-dependent electronic and optical properties. This article presents efficient optical image thresholding methodology designed to segment the mono, bi, and tri-layer regions of WSe 2 flakes mechanically exfoliated onto a SiO 2 /Si substrate. The optical images were first preprocessed to exclude the background effect and analyzed using the pixel medians and interquartile ranges for fundamental color channels—red, green, and blue (RGB). The analysis of red channel pixel intensities yielded three distinct ranges, serving as thresholds for layer segmentation: monolayer (111.0–118.0), bilayer (103.0–110.0), and tri-layer (93.0–103.0). Similarly, thresholds were established for each color channel, facilitating a comparative study of the segmentation performances. Further, the intersection-over-union ($IoU$) calculations revealed that the red and green channels demonstrated greater than 99 % and 90 % accuracy in differentiating each layer, respectively. This approach yields remarkable results without substantial data calibration that utilizes time-intensive heuristic techniques. Moreover, the proposed methodology offers the flexibility to compare performances across different color channels, expanding the applicability for other 2D material systems.
2D Materials↗
Recycling of CF-ABS machining waste for large format additive manufacturing
Large format additive manufacturing (LFAM) necessitates the use of short fiber thermoplastic composites, such as carbon fiber filled acrylonitrile butadiene styrene, to enable printing. Currently, when LFAM parts are machined into their final shape, the machining scrap (i.e., small flake like particles and offcuts) is landfilled. Previous studies have demonstrated the viability of recycling end-of-life LFAM parts by shredding and optionally re-compounding the material back into pellets. However, there is little understanding of the value and performance of recycled material made from LFAM machining scrap, which if pursued could motivate more broad recycling of this waste stream. In this study, recycled in-process machining scrap is explored as an LFAM feedstock source. Herein, it is found that the primary degradation mechanism of the recycled material is significant fiber length attrition during surface machining. While this fiber attrition negatively impacts the mechanical performance of the material in the print direction, it seems that the changes in processing behaviors and print quality, namely the surface roughness of the printed structure associated with shorter fiber lengths, is beneficial to interlayer adhesion. The tensile strength and elastic modulus of the recycled material, in the print direction, decreased 11% and 31% respectively compared to the pristine material. However, in the layer-wise direction it was found that the recycled material exhibited no significant change in elastic modulus and a significant 21% increase in tensile strength – a surprising result. In conclusion, this work indicates that machining waste could be a viable material stream for recycled LFAM feedstock materials.
42 ENGINEERING↗
Transparent window film with embedded nano-shades for thermoregulation
Every year, more than 20% of the energy consumption in the United States and more than 10% of the global consumption is used towards HVAC (Heating, Ventilating, Air-Conditioning) systems in buildings. Although continued efforts in advancing renewable energy, efficient appliances, and smart building systems are desired, the most critical factors that cause extensive indoor energy consumption are thermal leakage and thermal waste generation. We demonstrate a smart window film that allows natural lighting with a clear view while blocking oblique incident sunlight to make the building interior cooler without using electricity or generating heat. Building upon the concept of, often overlooked, traditional window shades and privacy window films, we emphasize and elevate the application and impact of using magnetically arranged nanoscale material for energy conservation purpose in buildings. By embedding vertically aligned Ni flakes (VANF) in a polymer matrix film, nanoscale mirror array serve as shades to block the high-angled incident sunlight, blocking approximately 73% of total solar irradiance and bringing down the indoor temperature by 1.92 °C during the daytime in a model house while providing nearly 90% transparency. Global application was simulated by applying the respective solar angle and intensity at selected latitudes, indicating their potential. This passively energy-conserving smart film is a low cost, maintenance free, and simple product for users and easy-to-manufacture product for the industry.
36 MATERIALS SCIENCE↗
Large scale polymer toughening of two-dimensional materials revealed by in situ TEM fracture tests and multiscale simulations
Two-dimensional (2D) materials offer significant potential for applications in energy-harvesting devices, batteries, sensors, and transistors. However, their intrinsic brittleness makes them prone to mechanical failure, limiting their practical use. In this work, we perform in situ transmission electron microscopy (TEM) fracture tests on monolayer MoSe2 and uncover an extrinsic toughening effect induced by an ultrathin adsorbed polystyrene adlayer. This adlayer substantially enhances the fracture resistance of the 2D flakes. Through a combination of molecular dynamics simulations and finite element analysis, we elucidate the molecular mechanism behind this toughening effect. Further, it arises from the active crack-bridging behavior of entangled polymer chains and the formation of a fracture process zone that stabilizes crack propagation and increases the energy required for crack extension. The proposed toughening mechanism offers a pathway to improving the mechanical reliability of 2D material-based devices by mitigating the risk of sudden failure.
2D materials↗
Atomic-scale mechanism of carbon nucleation from a deep crustal fluid by replica exchange reactive molecular dynamics simulation
Here we present a mechanistic model of carbon nucleation and growth from a fluid at elevated temperature (T) and pressure conditions, typical of those found in the shallow Earth’s lithosphere. Our model uses a replica exchange reactive molecular dynamics framework in which molecular configurations are swapped between adjacent T replica at regular intervals according to underlying statistical mechanics. This framework allows predicting complex molecular structures and thermodynamics while remaining computationally efficient. Here we simulate the reactivity of an unstable mixture of CO 2 and CH 4 at 1000 K and 1 GPa. We find that the path to thermodynamic equilibrium is initially entropy-driven, producing a diversity of short-lived species, including various alcohols with intermediate carbon oxidation states. Cyclic and polycyclic radicals that are sometimes resonance-stabilized form next and set the stage for carbon nucleation. The carbon exsolution process releases abundant water, is exothermic and starts with the nucleation of a large aggregate of hydrogenated graphene flakes from covalently bonded polycyclic units. The carbon backbone of this nucleus subsequently grows into a hydrogen-depleted fullerene-like structure, before evolving toward a partially bilayered graphene layer. Overall, our results show that the mechanism of graphitic C formation is certainly not bimolecular, and that it may involve a combination of key condensation and radical chain reactions. This will help understand the isotopic, and reactive characteristics of carbon-bearing fluids during their upward transit through the Earth’s mantle and crust. Moreover, the mechanistic insights outlined here present intriguing similarities with the process of soot and interstellar dust formation, which suggests that the widespread distribution of abiotic polyaromatic and graphitic material on Earth and beyond may reflect the prevalence of a fundamental chemical pathway.
58 GEOSCIENCES↗
Compact and accurate chemical mechanism for methane pyrolysis with PAH growth
In this study, a reliable and compact chemical mechanism of gas-phase methane pyrolysis leading to formation of large polycyclic aromatic hydrocarbon (PAH) molecules has been developed. This model is designed for studies of carbon nanostructure synthesis such as carbon black and graphene flakes, including soot growth kinetics. Methane pyrolysis with carbon nanostructure synthesis is a two-stage process where conversion of CH 4 to C 2 H 2 precedes the growth of PAH molecules from acetylene. We present a single chemical mechanism that accurately describes both stages. We have constructed a compact and accurate chemical mechanism capable of modeling both stages of methane pyrolysis based on the ABF mechanism which was expanded with the most prominent reaction pathways from the mechanism by Tao for small PAH molecules and HACA pathways for larger PAH molecules, up to 37 aromatic rings. The resulting mechanism was validated through comparison to multiple available sets of experimental data. Good agreement with the experimental data for both processes was obtained. Performance of the mechanism was tested for pyrolysis of methane-rich mixtures under long residence times leading to abundant formation of PAH molecules. It is shown that the inclusion of larger PAH species (up to A37) in the chemical mechanism is important for accurate prediction of the fraction of carbon converted to PAH molecules and, correspondingly, the residual fraction of acetylene in the mixture. The mechanism file is available upon request.
08 HYDROGEN↗
Angle-resolved polarized Raman study of layered b-As x P x-1 alloys: Identification of As-P vibrational modes
In this study, the polarization-resolved Raman spectra of b-As x P x-1 flakes with varying arsenic concentration (x = 0, 0.4, and 0.8) are systematically investigated. A clear polarization dependence is observed in the Raman intensity of all the P-P, As-P, and As-As modes and confirmed by the first-principles calculations. The observed angle-dependence can be related to the structure of the Raman tensors of each peak. In particular, the Raman intensities corresponding to As-P vibration modes are studied in detail. The out of plane As-P mode ($A$$^{1}_{g}$) is clearly identified, but the butterfly-shaped behavior observed in the polar plot around 350 cm -1 is interpreted as the combination of the two in-plane vibrations, one along the armchair and the other along the zigzag direction. This work allows unambiguous assignment of the $A$$^{1}_{g}$, B 2g , and $A$$^{2}_{g}$ modes of the As-P vibrational modes and the importance of the consideration of the superposition of the in-plane B 2g and $A$$^{2}_{g}$ modes. Such study can be utilized to further characterize the anisotropic structural properties and analyze the local distribution of the As and P in b-As x P x-1 alloys which will play key roles in electronic and optical properties. Furthermore, this methodology can be further extended to alloyed two-dimensional material systems with in-plane anisotropy in general.
2D materials↗
Determination of preferential binder oxidation in HTGR matrix material subjected to high temperature steam
Graphitic matrix material encapsulates tristructural isotropic (TRISO) coated fuel particles and is a structural component for both pebble and cylindrical fuel compacts in high temperature gas reactor (HTGR) designs. In an off-normal event involving steam exposure, the matrix material is exposed to oxidants, leading to degradation of the fuel compact and subsequent exposure of the TRISO particle fuel to oxidizing species. This study presents microstructural characterization of matrix material after exposure to high temperature (1200°C), 48 kPa steam in which the evolved microstructure demonstrated nonuniform degradation. Subsequent Raman spectroscopy determined the nature of the remaining material post-exposure. Finally, the electron microscopy characterization suggests and Raman spectroscopic analysis confirms, under off-normal conditions, the carbonized phenolic resin binder is preferentially oxidized ahead of the graphite flake filler and is responsible for the nonuniform degradation and enhanced depth of attack.
36 MATERIALS SCIENCE↗