Search NASA⌕ Search

SEARCH · Search NASA

Results for “foundry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Beyond Contrast Transfer: Spectral SNR as a Finite-Dose Metric for STEM Phase Retrieval

The contrast transfer function (CTF) is widely used to evaluate phase retrieval methods in scanning transmission electron microscopy (STEM), including center-of-mass imaging, parallax imaging, direct ptychography, and iterative ptychography. However, the CTF reflects only the maximum usable signal, neglecting the effects of finite electron fluence and the Poisson-limited nature of detection. As a result, it can significantly overestimate practical performance, especially in low-dose regimes. Here, we employ the spectral signal-to-noise ratio (SSNR), as a finite-dose statistical framework to evaluate the recoverable signal as a function of spatial frequency. Using numerical reconstructions of white-noise objects, we show that center-of-mass, parallax, and direct ptychography exhibit dose-independent SSNRs, with close-form analytic expressions. In contrast, iterative ptychography exhibits a surprising dose dependence: at low fluence, its SSNR converges to that of direct ptychography; at high fluence, it saturates at a value consistent with the maximum detective quantum efficiency predicted by recent quantum Fisher information bounds. The results highlight the limitations of CTF-based evaluation and motivate SSNR as a more accurate, finite-dose metric for assessing STEM phase retrieval methods.

STEM phase retrieval↗
DOE OSTI2026

Temperature‐Dependent Crystallization in Two‐Step Perovskite Deposition Revealed by In Situ GIWAXS and Machine Learning‐Guided Analysis

The performance and stability of perovskite solar cells are strongly governed by the crystallization behavior of their active layer. In two-step sequential deposition, early-stage film formation plays a decisive role in determining final phase purity and device quality. Guided by a data-driven analysis of nearly 39 000 devices in the FAIR perovskite database, we identified solvent-mediated quenching and thermal processing as key variables affecting power conversion efficiency (PCE), particularly in two-step fabrication. Here, to investigate these effects in real time, we designed and implemented a custom-built, temperature-controlled spin-coating system, enabling precise thermal modulation during precursor deposition. Using this platform, we performed in situ GIWAXS measurements to study the crystallization dynamics of FA 0.5 MA 0.5 PbI 3 films over a temperature range of 30°C–90°C. Our results reveal a non-monotonic relationship between spin-coating temperature and α-phase formation, governed by the interplay between precursor interdiffusion, PbI 2 crystallinity, and δ-phase suppression. The custom thermal control enabled us to isolate and quantify these competing effects during the earliest stages of film formation, providing mechanistic insight into how spin-coating temperature governs both phase purity and kinetic pathways in two-step perovskite systems. Temperature-dependent SEM and photovoltaic device measurements further demonstrate that early-stage crystallization pathways directly translate into differences in morphology, charge-transport continuity, and device performance. These findings inform targeted strategies for optimizing deposition protocols to balance rapid nucleation, phase stability, and device performance.

Saadawy, Ahmed [King Fahd University of Petroleum ↗
DOE OSTI2024

Accelerating the Electrochemical Formation of the δ Phase in Manganese-Rich Rocksalt Cathodes

Mn-rich disordered rocksalt materials with Li-excess (DRX) materials have emerged as a promising class of earth-abundant and energy-dense next-generation cathode materials for lithium-ion batteries. Recently, an electrochemical transformation to a spinel-like “δ” phase has been reported in Mn-rich DRX materials, with improved capacity, rate capability, and cycling stability compared with previous DRX compositions. However, this transformation unfolds slowly over the course of cycling, complicating the development and understanding of these materials. In this work, it is reported that the transformation of Mn-rich DRX materials to the promising δ phase can be promoted to occur much more rapidly by electrochemical pulsing at elevated temperature, rate, and voltage. To extend this concept, micron-sized single-crystal DRX particles are also transformed to the δ phase by the same method, possessing greatly improved cycling stability in the first demonstration of cycling for large, single-crystal DRX particles. To shed light on the formation and specific structure of the δ phase, X-ray diffraction, scanning electron nanodiffraction (SEND) and atomic resolution STEM-HAADF are used to reveal a nanodomain spinel structure with minimal remnant disorder.

25 ENERGY STORAGE↗
DOE OSTI2024

ASb 3 Mn 9 O 19 (A = K or Rb): New Mn-Based 2D Magnetoplumbites with Geometric and Magnetic Frustration

Magnetoplumbites are one of the most broadly studied families of hexagonal ferrites, typically with high magnetic ordering temperatures, making them excellent candidates for permanent magnets. However, magnetic frustration is rarely observed in magnetoplumbites. Herein, the discovery, synthesis, and characterization of the first Mn-based magnetoplumbite, as well as the first magnetoplumbite involving pnictogens (Sb), ASb 3 Mn 9 O 19 (A = K or Rb) are reported. The Mn 3+ ( S = 2) cations, further confirmed by DC magnetic susceptibility and X-ray photoelectron spectroscopy, construct three geometrically frustrated sublattices, including Kagome, triangular, and puckered honeycomb lattices. Magnetic properties measurements revealed strong antiferromagnetic spin–spin coupling as well as multiple low-temperature magnetic features. Heat capacity data does not show any prominent λ-anomaly, suggesting minimal associated magnetic entropy. Moreover, neutron powder diffraction (NPD) implied the absence of long-range magnetic ordering in KSb 3 Mn 9 O 19 down to 3 K. However, several magnetic peaks are observed in RbSb 3 Mn 9 O 19 at 3 K, corresponding to an incommensurate magnetic structure. Interestingly, strong diffuse scattering is seen in the NPD patterns of both compounds at low angles and is analyzed by reverse Monte Carlo refinements, indicating short-range spin ordering related to frustrated magnetism as well as 2D magnetic correlations in ASb 3 Mn 9 O 19 (A = K or Rb).

2-D magnetic correlation↗
DOE OSTI2025

Ligand‐Induced Crystallization Control in MAPbBr 3 Hybrid Perovskites for High Quality Nanostructured Films

AbstractControlling the formation of hybrid perovskite thin films is crucial in obtaining high‐performance optoelectronic devices, since factors like morphology and film thickness have a profound impact on a film's functionality. For light‐emitting applications grain sizes in the sub‐micrometer‐range have previously shown enhanced brightness. It is therefore crucial to develop simple, yet reliable methods to produce such films. Here, a solution‐based synthesis protocol for the on‐substrate formation of MAPbBr3 (MA = methylammonium) nanostructures by adding the bifunctional rac‐3‐aminobutyric acid to the precursor solution is reported. This synthesis route improves key optical properties such as photoluminescence quantum yields and life times of excited states by inducing a controlled slow‐down of the film formation and suppressing agglomeration effects. In situ spectroscopy reveals a delayed and slowed down crystallization process, which achieves synthesis of perovskite structures with much reduced defect densities. Further, aggregation can be controlled by the amount of amino acid added and adjusting the synthesis protocol allows to produce cubic crystallites with targeted size from nanometer to micrometer scales. The nanocrystalline MAPbBr3 samples show enhanced amplified spontaneous emission (ASE) intensities, reduced ASE thresholds and purer ASE signals, compared to pristine films, even under intense optical driving, making them promising structures for lasing applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tuning Interface Electronic Properties via Chiral Two‐Dimensional Metal‐Organic Frameworks

Control over structural symmetries in nanomaterials offers a powerful approach to engineer electronic properties. For instance, breaking of mirror symmetries in two-dimensional (2D) materials with a hexagonal lattice can lead to nontrivial electronic topologies and correlated-electron phenomena. Yet, the impact of structural chirality on the electronic properties of 2D materials and interfaces remains underexplored. Here, how chiral phases of a 2D metal-organic framework (MOF) with a hexagonal lattice—consisting of hexaazatriphenylene molecules coordinated to Cu atoms—scatter, confine, and perturb the Shockley surface state (SS) electrons of an underlying Ag(111) substrate is investigated. Via low-temperature scanning tunneling microscopy and spectroscopy, noncontact atomic force microscopy, and numerical calculations based on an electronic plane-wave expansion method, modifications of the Ag(111) SS band structure are shown and quantified, including gap openings and lifts of band degeneracies, driven exclusively by the structural chirality of the 2D MOF phases. These findings highlight how structural symmetries, in particular chirality, affect electronic states at material interfaces, expanding on the toolkit for designing 2D materials with tailored electronic properties.

band structure engineering↗
DOE OSTI2025

Radiation-induced vacancy injection in heterogeneous multiphase materials

Understanding the synergy between corrosion and defect dynamics is a key consideration in the development of advanced materials for extreme environments. Here, we reveal a surprising phenomenon for the transport of point defects induced by irradiation in a heterogeneous multiphase structure of a metal and an oxide, similar to that formed under metal corrosion that takes place in most environments. Despite the confinement of the produced damage within the oxide, vacancies were injected into the unirradiated metal and coarsened with dose. Furthermore, the results show that the nature of the oxide layer dictates the defect evolution in the metal layer. This work reveals an interesting mechanism for point defect interactions in multiphase materials, with broad implications in many fields, while also emphasizing the complex coupling between corrosion and irradiation. Corrosion leads to the formation of multiphase materials, while irradiation enhances diffusion within the heterogeneous phases, which can impact corrosion rates.

36 MATERIALS SCIENCE↗
DOE OSTI2025

NEXAFS Spectroscopy of P3HT and PBTTT at the Sulfur K-Edge

The sulfur K-edge near-edge X-ray absorption fine-structure (NEXAFS) spectra of the common conjugated polymers P3HT and PBTTT are studied from both experimental and theoretical perspectives. Experimental angle-resolved spectra are measured to characterize both the dominant peaks and the dichroism of the polymers. First-principles calculations using the density functional theory-based many-body X-ray absorption spectroscopy (MBXAS) method are performed for the two polymers as well as for the thiophene and thienothiophene units that make up the conjugated backbones of these polymers. Through this combined approach, we are able to confidently assign the observed peaks to specific molecular orbitals and identify the orientation of their transition dipole moments (TDMs) with respect to the coordinate frame of the polymer backbone. Here, in particular, we are able to establish the character and orthogonal nature of the three main low-energy peaks at: (i) 2473.5 eV, 1s → (S–C)­π* with TDM along the π-stacking direction; (ii) 2474.1 eV, 1s → (S–C)­σ* with TDM along the backbone; and (iii) 2475.4 eV, 1s → (S–C)­σ* with TDM perpendicular to the first two. By performing both gas-phase and solid-state simulations, and with reference to the NEXAFS spectra of thiophene and thienothiophene building blocks, the influences of polymerization and molecular packing are also explored.

Chantler, Paul Alexander [Monash University, Clayt↗
DOE OSTI2025

Screening of Coulombic Interactions To Achieve a Higher Power Factor in Conjugated Polymers

Thermoelectric properties of conducting polymers typically suffer from molecular chain disordering, as charge transport is predominantly controlled by morphology. This is especially more problematic when counterions are introduced to tune the carrier concentration for optimal thermoelectric performance, which disturbs the morphology further. Here, in this work, we introduce a new avenue for enhancing thermoelectric properties without needing to regulate the morphology, namely, by controlling the coulombic interaction between polarons and counterions. We perform in situ de-doping thermoelectric experiments over 3 orders of magnitude change in electrical conductivity of three distinct thermoelectric polymers, namely, poly(3-hexylthiophene-2,5-diyl) (P3HT), poly[2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT-C 12 ), and poly[2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno[3,2-b]thiophene)] (OD-PDPP2T-TT) conjugated polymers, followed by grazing-incidence wide-angle X-ray scattering (GIWAXS) to study their respective morphologies. We demonstrate a 9-fold enhancement in the thermoelectric power factor in OD-PDPP2T-TT compared to PBTTT-C 12 and link it to the coulombic screening of charge carriers, including in the optimally doped regime. We support this hypothesis using Boltzmann transport equations and show that, in both P3HT and PBTTT-C 12 , as the polymer is doped, impurity scattering remains the dominant scattering mechanism, while in OD-PDPP2T-TT, the scattering mechanism changes from impurity to acoustic phonon limited, resulting in more effective screening of ionized counterions. Our results provide an additional knob to enhance the fundamental understanding of thermoelectric physics of conducting polymers and provide a pathway to achieve higher performance in the field of organic thermoelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Prodrug Strategy to Conditionally Trap Therapeutic Payloads for Improved Tumor Retention

Altered extracellular proteolysis has been exploited to selectively activate therapeutics in diseases such as cancer; however, once activated, extracellular drugs can diffuse away, limiting efficacy. We address this challenge by coupling proteolytic activation with membrane tethering to retain drugs within diseased tissue. To accomplish this, we developed “restricted interaction peptides” (RIPs), a delivery platform that leverages elevated proteolytic activity to activate membrane-interacting peptides, localizing cargos near the site of proteolysis. We demonstrate that RIPs can deliver diverse therapeutic cargos, including cytotoxins and radioisotopes. As proof of concept, we engineered “FRIP,” a RIP designed for cleavage by fibroblast activation protein (FAP), an endoprotease upregulated in solid tumors and fibrosis. Efficient P4–P4’ substrate sequences were identified and incorporated into FRIPs. Cell-based studies showed that, upon activation, the peptide adhered to membranes rapidly internalized and successfully delivered therapeutic cargos. Consistent with this, FRIPs delivering MMAE inhibited proliferation in an FAP-dependent manner. Imaging studies confirmed tumor targeting with minimal uptake in normal tissues. Finally, FRIPs delivering MMAE or Cu-67 exhibited potent antitumor effects. These findings establish membrane tethering as a strategy to enhance drug retention.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Direct Observation of Morphological and Chemical Changes during the Oxidation of Model Inorganic Ligand-Capped Particles

Functionalization and volatilization are competing reactions during the oxidation of carbonaceous materials and are important processes in many different areas of science and technology. Here, we present a combined ambient pressure X-ray photoelectron spectroscopy (APXPS) and grazing incidence X-ray scattering (GIXS) investigation of the oxidation of oleic acid ligands surrounding NaYF 4 nanoparticles (NPs) deposited onto SiO x /Si substrates. While APXPS monitors the evolution of the oxidation products, GIXS provides insight into the morphology of the ligands and particles before and after the oxidation. Our investigation shows that the oxidation of the oleic acid ligands proceeds at O 2 partial pressures of below 1 mbar in the presence of X-rays, with the oxidation eventually reaching a steady state in which mainly CH x and –COOH functional groups are observed. The scattering data reveal that the oxidation and volatilization reaction proceeds preferentially on the side of the particle facing the gas phase, leading to the formation of a chemically and morphologically asymmetric ligand layer. This comprehensive picture of the oxidation process could be obtained only by combining the X-ray scattering and APXPS data. The investigation presented here lays the foundation for further studies of the stability of NP layers in the presence of reactive trace gases and ionizing radiation and for other nanoscale systems where chemical and morphological changes happen simultaneously and cannot be understood in isolation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Two-Dimensional Tantalum Carbo-Selenide for Hydrogen Evolution

Herein, we report the synthesis of two-dimensional Ta 2 Se 2 C (2D-Ta 2 Se 2 C) nanosheets using electrochemical lithiation in multilayer Ta 2 Se 2 C followed by sonication in deionized water. Multilayer Ta 2 Se 2 C was obtained via solid-state synthesis of Fe x Ta 2 Se 2 C followed by chemical etching of Fe. 2D-Ta 2 Se 2 C exhibited promising electrocatalytic activity for the hydrogen evolution reaction from water compared to multilayer Ta 2 Se 2 C and 2D-TaSe 2 . 2D-Ta 2 Se 2 C showed an overpotential at 10 mA·cm -2 (η 10 ) of 264 mV, a Tafel slope of 91 mV·dec -1 , and an electrochemically active surface area of 17.61 m ECSA 2 ·g catalyst -1 . The high performance could be attributed to the large surface area of single sheets which hence maximizes the number of exposed catalytic sites and increased density of vacancies, observed with transmission electron microscopy, during synthesis and processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Engineering Escherichia coli for Urease-Driven Synthesis of Metal Oxide Nanomaterials

The development of functional nanomaterials with controlled morphologies is essential for advancements in medicine, electronics and computing, energy, catalysis, and environmental applications. However, conventional synthesis methods often demand high energy input and pose significant environmental challenges. Urease-based biomineralization presents an efficient, eco-friendly alternative for nanomaterial production under mild conditions. In this study, we engineered Escherichia coli ( E. coli ) to express a urease gene cluster from Sporosarcina pasteurii using CRAGE-Duet technology. The engineered strain successfully synthesized calcium carbonate and calcium phosphate crystals. Expanding the approach, we synthesized metal oxide nanoparticles, including hematite (Fe 2 O 3 ), and nanocrystalline anatase titanium dioxide (TiO 2 ). These nanomaterials were characterized by electron microscopy, demonstrating the potential of E. coli as a sustainable and versatile platform for green nanomaterial synthesis.

bacteria↗
DOE OSTI2025

Sub-10 nm upconversion nanocrystals for long-term single-particle tracking

Lanthanide-doped upconversion nanoparticles are attractive single-molecule imaging probes due to their high photostability and anti-Stokes luminescence. However, achieving both small particle size and strong brightness has remained a major challenge, as reducing size often leads to dimmer emission. Herein, we fabricate a sub-10 nm cascade actively protected upconversion nanoparticles, which shows a 33-fold enhanced upconversion efficiency at the single-particle level compared to larger ~19 nm conventional nanoparticles. Theoretical modeling and time-resolved measurements show that emission loss mainly comes from energy leakage of Er 3+ ions to surface defects. By introducing a NaYbF 4 layer as photon-harvesting and protective intermediate layer, we minimize this energy loss and significantly boost brightness. A monolayer of inert NaLuF 4 can effectively suppress the surface quenching to Yb 3+ . Using these ultra-small bright probes, we successfully tracked single epidermal growth factor receptor molecules on live cells for up to one hour, revealing dynamic switching between different diffusion modes.

Qiu, Xiaochen [Fudan Univ., Shanghai (China); Shen↗
DOE OSTI2025

Entanglement of a nuclear spin qubit register in silicon photonics

Colour centres provide an optical interface to quantum registers based on electron and nuclear spin qubits in solids. The T centre in silicon is an emerging spin–photon interface that combines telecom O-band optical transitions and an electron spin in a scalable photonics platform. Here, in this study, we integrate T centres into single-mode photonic waveguides in a silicon-on-insulator platform. We demonstrate the initialization, coherent control and state read-out of a three-qubit register based on the electron spin of a T centre coupled to a hydrogen and a silicon nuclear spin. The spin register exhibits spin echo coherence times of 0.41(2) ms for the electron spin, 112(12) ms for the hydrogen nuclear spin and 67(7) ms for the silicon nuclear spin. We use nuclear–nuclear two-qubit gates to generate entanglement between the two nuclear spins with a fidelity of F = 0.77(3) and a coherence time of ${T}_{2}^{* }=2.60(8)$ ms. Our results show that a T centre in silicon photonics can realize a multi-qubit register with an optical interface for quantum communication.

Song, Hanbin [Lawrence Berkeley National Laborator↗
DOE OSTI2025

Dual interfacial H-bonding-enhanced deep-blue hybrid copper–iodide LEDs

Solution-processed light-emitting diodes based on non-toxic copper–iodide hybrids are a compelling solution for efficient and stable deep-blue lighting, owing to their tunability, high photoluminescence efficiency and environmental sustainability. Here we present a hybrid copper–iodide that shows near-unity photoluminescence quantum yield (99.6%) with an emission wavelength of 449 nm and colour coordinates (0.147, 0.087), alongside its emission mechanism and charge transport characteristics. Here, we use the thin film of this hybrid as the sole active emissive layer to fabricate deep-blue light-emitting diodes and subsequently enhance the device performance through a dual interfacial hydrogen-bond passivation strategy. This synergetic surface modification approach, integrating a hydrogen-bond-acceptor self-assembled monolayer with an ultrathin polymethyl methacrylate capping layer, effectively passivates both heterojunctions of the copper–iodide hybrid emissive layer and optimizes charge injections. We achieve a maximum external quantum efficiency of 12.57%, a maximum luminance of 3,970.30 cd m −2 with colour coordinates (0.147, 0.091) and an excellent operational stability (half-lifetime) of 204 hours under ambient conditions. We further showcase a large-area device of 4 cm 2 that maintains high efficiency. Our findings reveal the potential of copper–iodide-based hybrid materials for applications in solid-state lighting and display technologies, offering a versatile strategy for enhancing device performances.

14 SOLAR ENERGY↗
DOE OSTI2025

Isothermal solidification for high-entropy alloy synthesis

Kinetically trapping the high-temperature states through rapid cooling solidification is widely used for the synthesis of high-entropy alloys (HEAs), especially those with intrinsically immiscible elemental combinations. However, strategies need to be developed to overcome the fundamental limitations of rapid cooling solidification in controlling the crystallinity, structure and morphology of HEAs. Here, in this study, we introduce an isothermal solidification strategy for the synthesis of HEAs by rapidly altering the metal alloy composition through liquid–liquid interface reactions at low temperatures, for example, from 25 °C to 80 °C. We use gallium (Ga)-based metal as the sacrificial reagent and mixing medium. By directing the reactions to the interfaces between the Ga-based liquid metal and an aqueous metal ion solution, the foreign metal ions can be reduced at the interfaces and incorporated into the liquid metal quickly. HEAs with various crystallinity (single crystal, mesocrystal, polycrystal and amorphous), morphology (zero, two and three dimensions) and compositions can be achieved through the isothermal solidification. Ga can be completely consumed, resulting in Ga-free HEAs. If desired, Ga can be one of the metal elements in the final products. In situ liquid phase transmission electron microscopy (TEM) studies and theoretical analysis show the isothermal solidification mechanisms. Our direct observations show the enhanced mixing of liquid metal elements and the solidification process with fluctuating nucleation dynamics. The isothermal solidification marks a powerful strategy for HEA synthesis through an unexplored pathway of kinetically trapping the high-entropy states.

Zhang, Qiubo [Lawrence Berkeley National Laborator↗
DOE OSTI2024

Electrochemical lithium extraction from hectorite ore

Electrochemical technologies add a unique dimension for ore refinement, representing tunable methods that can integrate with renewable energy sources and existing downstream process flows. However, the development of electrochemical extraction technologies has been impeded by the technological maturity of hydro- and pyro-metallurgy, as well as the electrical insulating properties of many metal oxide ores. The fabrication and use of carbon/insulating material composite electrodes has been a longstanding method to enable electrochemical activation. Here, using real hectorite ore, we employ this technical approach to fabricate hectorite-carbon black composite electrodes (HCCEs) and achieve electrochemical activation of hectorite. Anodic polarization results in lithium-ion release through a multi-step chemical and electrochemical mechanism that results in 50.7 ± 4.4% removal of lithium from HCCE, alongside other alkaline ions. This technical proof-of-concept study underscores that electrochemical activation of ores can facilitate lattice deterioration and ion removal from ores.

25 ENERGY STORAGE↗