Search NASA⌕ Search

SEARCH · Search NASA

Results for “grain boundary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

A criterion for slip transfer at grain boundaries in Al

The slip transfer phenomenon was studied at the grain boundaries of pure Aluminum by means of slip trace analysis. Either slip transfer or blocked slip was analyzed in more than 250 grain boundaries and the likelihood of slip transfer between two slip systems across the boundary was assessed. The experimental results indicate that slip transfer was very likely to occur if the residual Burgers vector, Δb, was below 0.35b and the Luster-Morris parameter was higher than 0.9, and that the ratio of the Luster-Morris parameter and the residual Burgers vector has a threshold above which slip transfer is probable.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Extended Rice–Thomson analysis and atomistic simulations revealing grain boundary effects on fracture in refractory high-entropy alloys

Significance This work serves to extend the fundamental ductile vs. brittle fracture theory, specifically the Rice–Thomson criterion, by introducing a grain boundary ahead of an initiating crack which propagates at an oblique angle to impinge the boundary. Atomistic fracture simulations on two refractory complex concentrated alloys, the brittle NbMoTaW and the ductile Nb 45 Ta 25 Ti 15 Hf 15 , demonstrate qualitative correspondence with the extended Rice–Thomson criterion and experimental observations. Abstract Understanding how grain boundaries mediate fracture remains a critical challenge in designing ductile, high-performance refractory alloys. Here, we extend the Rice–Thomson criterion to account for the angle between cracks and the impinging grain boundaries (GBs), capturing the competition between intergranular fracture and dislocation-mediated plasticity. Using machine learning interatomic potentials, we performed molecular statics simulations to probe fracture mechanisms in nanocrystalline NbMoTaW and Nb 45 Ta 25 Ti 15 Hf 15 , each with two different grain sizes, revealing trends consistent with experimental observations and the extended Rice model. Comparison with averaged R-curves for bulk samples demonstrates that GBs enhance ductility in Nb 45 Ta 25 Ti 15 Hf 15 in both grain sizes investigated. In contrast, GBs only locally improve fracture resistance in NbMoTaW when cracks are temporarily pinned at GBs inclined at high angles from the crack, but generally promote brittle intergranular fracture. These contrasting behaviors are attributed to differences in GB cohesion, reflecting clear alloying trends that align with ab-initio calculations and trends observed experimentally. Our results bridge classical fracture theory, atomistic simulations, and experimental observations, providing a comprehensive understanding of the fracture mechanisms in nanocrystalline refractory complex concentrated alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bulk nanocrystalline Al–Mg–Y alloys with amorphous grain boundary complexions display high strength and compressive plasticity

Although nanocrystalline alloys regularly exhibit high strengths, their use in structural applications often face challenges due to sample size limitations, unstable microstructures, and the limited ability to plastically deform. The incorporation of amorphous grain boundary complexions has been proposed to address these issues, by simultaneously stabilizing nanocrystalline grain structures for scale-up processing and improving alloy toughness. In the present study, the mechanical behavior of bulk nanocrystalline Al–Mg–Y is examined with macroscale compression testing, probing a length scale that is relevant to real-world structural applications. Bulk samples were fabricated via a simple powder metallurgy approach, with different hot-pressing temperatures and durations employed for consolidation in order to investigate microstructural and property evolution. All of the specimens contained primary face-centered cubic Al and secondary Al 4 C 3 and Al 3 Y phases, with the Al 3 Y particles exhibiting two populations of small equiaxed and larger elongated particles. Appreciable plasticity was measured along with high ultimate stresses over 800 MPa due to the presence of amorphous grain boundary complexions. Microstructural characterization of fracture surfaces revealed that the area fraction of dimpled regions increased with longer hot-pressing time. Most importantly, the elongated Al 3 Y particles formed regular cellular patterns with increasing hot-pressing time, delaying shear localization and significantly enhancing plasticity. The hierarchy present in the microstructure of the Al–Mg–Y alloy, from amorphous grain boundary complexions to secondary phases, gives rise to excellent bulk mechanical properties, which are attractive for structural applications.

Bulk nanocrystalline alloy↗
DOE OSTI2022

Numerical and experimental characterization of twin transmission across grain boundaries along the forward and lateral directions

Pervasive deformation twinning and transmission events across grain boundaries (GBs) affect the strength and failure of hexagonal close-packed (HCP) magnesium. A three-dimensional twin can transmit along the twinning shear direction, (forward), and along the direction perpendicular to both the twinning plane normal and the shear direction, (lateral). For the first time, phase-field calculations and electron backscatter diffraction (EBSD)-based statistical analysis are combined to investigate the effect of the twinned grain boundary characteristics on twin transmission (TT) along the forward and lateral directions. This combined analysis reveals that TT propensity decreases with increasing misorientation angle across the GB for both forward and lateral directions. Also, the TT is more favorable along the lateral than along the forward direction. Twin transmission seems harder across GBs with a misorientation axis closer to the twin -direction than the other directions ( and ). Further, the PF calculations reveal that, at the onset of a transmission process, the crystallography tends to be preserved in the case of lateral transmission, whereas, in the forward transmission case, the transmitted twin punches straight through the GBs and its morphology prevails. Additionally, the EBSD analysis finds that pure forward and lateral transmissions do not occur often, yet reveals a preference for lateral propagation consistent with PF simulations. Further, the local twin transmission configurations observed in the actual material do not correspond to pure tilt or twist GBs, which are most commonly considered as model cases.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Correlating dislocation structures to basal and prismatic slip bands near grain boundaries in tensile-tested Mg–4Al using a multiscale electron microscopy approach

Dislocation structures where basal and prismatic slip bands meet grain boundaries in tensile-tested Mg with 4 wt% Al (Mg–4Al) were studied using a multiscale electron microscopy approach to explore the assumptions made for the dislocation pileup theory: a) slip bands consist of dislocation arrays piling up near grain boundaries, and b) stress concentration in the adjacent grain is solely caused by dislocation pileup. After post-testing electron backscatter diffraction (EBSD) scans, focused-ion-beam (FIB) lift-out specimens were prepared from regions of interest so that the specimen plane is parallel to the bulk sample surface to allow for direct correlation between mesoscale and microscale characterization. High dislocation density and the dislocation arrays in the slip bands corroborated with the first assumption. Evidence of plastic deformation in all grains, however, showed that the second assumption was false. Additionally, dislocation structures including crystal rotation boundaries and dislocations dissociating to the basal plane provide additional stress relief mechanisms near grain boundaries that are not accounted for in many crystal plasticity models, which requires auxiliary models to more accurately predict the stress and strain distribution in a microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Grain boundary structure search by using an evolutionary algorithm with effective mutation methods

Grain boundaries (GBs) accommodate the misorientation between adjacent grains in a polycrystalline material. GBs are geometrically described by the macroscopic and microscopic degrees of freedom. Besides, at the atomistic level, GBs exhibit complicated behaviors under varying thermodynamic conditions. The complexity of atomistic GB structures demands stochastic searching for possible states. The effectiveness of stochastic search methods relies on techniques to recreate and select atomistic structures. In this work, we developed a new mutation operator that can induce direct and collective atomistic structure changes to boost the search efficiency of exploring GB structures with evolutionary algorithms (EA). We implemented the mutation methods along with innovative selection, crossover, boundary condition preprocessing methods to form an EA-based package to explore GB structures in grand canonical ensembles with atomistic simulations. We used this package to study the [001] symmetric tilt grain boundaries (STGBs) in FCC copper (Cu), the [110] STGBs in BCC tungsten (W), and the $[1\bar{2}10]$ STGBs in HCP magnesium (Mg). The results show that our design and implementation based on new mutation procedures, selection, and boundary conditions provide a high-quality search of atomistic GB structures in the grand canonical ensemble for different crystal lattices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Molecular dynamics study of grain boundary and radiation effects on tritium population and diffusion in zirconium

Tritium population thermodynamics and transport kinetics critically define the tritium storage performance of zirconium tritides that can be used for a variety of nuclear applications including tritium-producing burnable absorber rods. Both thermodynamic and kinetic properties can be sensitive to grain sizes of materials and can be significantly altered by irradiated defects during operation under the reactor environments. A thorough experimental characterization of how these properties evolve under different reactor conditions and different initial grain structures is extremely challenging. Here molecular dynamics simulations are used to investigate tritium population and diffusion in zirconium with and without different planar symmetric and asymmetric tilt grain boundaries and irradiated defects. Here, we found that in addition to trapping tritium, the most significant effect of planar grain boundaries is to increase tritium diffusivity on the boundary plane. Furthermore, fine grain structures are found to mitigate the change of tritium diffusivity due to irradiated point defects as these point defects are likely to migrate to and sink at grain boundaries.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Grain-boundary fracture mechanisms in Li 7 La 3 Zr 2 O 12 (LLZO) solid electrolytes: When phase transformation acts as a temperature-dependent toughening mechanism

Garnet-type, solid electrolytes, such as Li 7 La 3 Zr 2 O 12 (LLZO), are a promising alternative to liquid electrolytes for lithium-metal batteries. However, such solid-electrolyte materials frequently exhibit undesirable lithium (Li) metal plating and fracture along grain boundaries. In this work, we employ atomistic simulations to investigate the mechanisms and key fracture properties associated with intergranular fracture along one such boundary. Our results show that, in the case of a Σ5 (310) grain boundary, this boundary exhibits brittle fracture behavior, i.e. the absence of dislocation activity ahead of the propagating crack tip, accompanied with a decrease in work of separation, peak stress, and maximum stress intensity factor as the temperature increases from 300 K to 1500 K. As the crack propagates, we predict two temperature-dependent Li clustering regimes. For temperatures at or below 900 K, Li tends to cluster in the bulk region away from the crack plane driven by a void-coalescence mechanism concomitant a simultaneous cubic-to-tetragonal phase transition. The tetragonalization of LLZO in this temperature regime acts as an emerging toughening mechanism. At higher temperatures, this phase transition mechanism is suppressed leading to a more uniform distribution of Li throughout the grain-boundary system and lower fracture properties as compared to lower temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Associating damage nucleation and distribution with grain boundary characteristics in Ta

Here, the effect of grain boundary (GB) characteristics (as represented by misorientation angle) on its dynamic response is investigated by sampling a large set of 185 GBs in Ta bi-crystals. These GBs encompass both ordered and disordered structures – typically referred to as metastable structures, in order to reflect the diversity in the local atomic structure observed in realistic GBs. The results reveal four distinct regimes in damage distribution and failure modes as a function of misorientation angle. The above trends also correlate with the variation in the corresponding void nucleation stress.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Interstitial hydrogen enhances the mobility of some grain boundaries in tungsten

Segregation of interstitials at a grain boundary (GB) is known to generally lower its mobility. This phenomenon, called 'solute-drag', has important ramifications on the process of recrystallization and microstructural evolution. Here, we present predictions from molecular dynamics (MD) simulations which demonstrate that interstitial hydrogen in tungsten can in fact increase the mobility of some GBs which exhibit shear coupling. Assuming a disconnection-based mechanism, activation energies and pre-factors for disconnection nucleation are predicted from simulations of shear-coupled motion. In GBs where enhanced mobility is predicted, interstitial H reduces both the activation energy and the pre-factor for disconnection nucleation, thus effectively increasing the mobility. For GBs with diminished mobility, MD predicts that presence of interstitial H reduces the pre-factor and, in some cases, increases the activation energy. The reduction in the activation energy inferred from MD simulations are confirmed by nudged elastic band calculations. Temperature-dependent structural transitions are observed for some GBs, and the effect of interstitial H is found to change with the changes in structure. The effect of interstitial H is predicted to be complex and highly variable, providing some plausible explanations for experimental observations on the recrystallization of tungsten in presence of H-loaded plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Grain boundary metastability controls irradiation resistance in nanocrystalline metals

Grain boundaries (GBs) in polycrystalline materials are powerful sinks for irradiation defects. While standard theories assume that a GB’s efficiency as a sink is defined solely by its character before irradiation, recent evidence conclusively shows that the irradiation sink efficiency is a highly dynamic property controlled by the intrinsic metastability of GBs under far-from-equilibrium irradiation conditions. In this paper, we reveal that the denuded (i.e., defect-free) zone, typically the signature of a strong sink, can collapse as irradiation damage accumulates. We propose a radiation damage evolution model that captures this behavior based on the emergence of a series of irradiation defect-enabled metastable GB microstate changes that dynamically alter the ability of the GB to absorb further damage. We show that these microstate changes control further defect absorption and give rise to the formation of a defect network that manifests itself as a net Nye-tensor signal detectable via lattice curvature experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Perovskite grain wrapping by converting interfaces and grain boundaries into robust and water-insoluble low-dimensional perovskites

Stabilizing perovskite solar cells requires consideration of all defective sites in the devices. Substantial efforts have been devoted to interfaces, while stabilization of grain boundaries received less attention. Here, we report on a molecule tributyl(methyl)phosphonium iodide (TPI), which can convert perovskite into a wide bandgap one-dimensional (1D) perovskite that is mechanically robust and water insoluble. Mixing TPI with perovskite precursor results in a wrapping of perovskite grains with both grain surfaces and grain boundaries converted into several nanometer-thick 1D perovskites during the grain formation process as observed by direct mapping. The grain wrapping passivates the grain boundaries, enhances their resistance to moisture, and reduces the iodine released during light soaking. The perovskite films with wrapped grains are more stable under heat and light. The best device with wrapped grains maintained 92.2% of its highest efficiency after light soaking under 1-sun illumination for 1900 hours at 55°C open-circuit condition.

14 SOLAR ENERGY↗
DOE OSTI2024

Quantification of grain boundary effects on the geometrically necessary dislocation density evolution and strain hardening of polycrystalline Mg 4Al using in situ tensile testing in scanning electron microscope and HR-EBSD

In situ tensile testing in a scanning electron microscope (SEM) in conjunction with high-resolution electron backscatter diffraction (HR-EBSD) under load was used to characterize the evolution of geometrically necessary dislocation (GND) densities at individual grain boundaries as a function of applied strain in a polycrystalline Mg—4Al alloy. The increase in GND density was investigated at plastic strains of 0 %, 0.6 %, 2.2 %, 3.3 % from the area including 76 grains and correlated with (i) geometric compatibility between slip systems across grain boundaries, and (ii) plastic incompatibility. We develop expressions for the grain boundary GND density evolution as a function of plastic strain and plastic incompatibility, from which uniaxial tensile stress-strain response of polycrystalline Mg—4Al are computed and compared with experimental measurement. The findings in this study contribute to understanding the mechanisms governing the strain hardening response of single-phase polycrystalline alloys and more reliable prediction of mechanical behaviors in diverse microstructures.

Geometrically necessary dislocations↗
DOE OSTI2022

Molecular dynamics studies of grain boundary mobility and anisotropy in BCC γ-uranium

Grain morphologies such as grain size and aspect ratio in uranium-based metallic fuels are important microstructural features that can impact various fuel performance properties such as fission-gas-induced swelling, thermal transport, high burnup structure formation, and radiation resistance. Accurate prediction of the fuel grain morphologies requires knowledge of critical grain growth parameters such as grain boundary (GB) mobility and anisotropy. In this work, molecular dynamics simulations were performed to study the GB mobility and its anisotropy in pure body-centered-cubic (BCC) γ uranium. Nine GBs with different combinations of misorientation angles (20°, 30°, 45°) and rotation axes (<100>, <110>, <111>), as well as an additional <111> 38.2° GB were studied using three interatomic potentials. Here, it is found that the GB mobility anisotropy has complex trends, depending on both rotation axis and misorientation. However, in general the <110> rotation axis has the fastest GB mobility at the same misorientation. The results of this work can be used as not only baselines for future studies of GB mobility in uranium-based alloys such as uranium-molybdenum (U-Mo) fuels, but also input for mesoscale modeling of grain growth in uranium-based alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Phase field dislocation dynamics formulation coupled with Fourier based micromechanics solver and its application to grain boundary–dislocation interactions

A new phase field dislocation dynamics (PFDD) formulation for homogeneous and heterogeneous materials is presented, which couples micromechanical solvers and the time-dependent Ginzburg–Landau equation. The strain fields are obtained from the micromechanical solver by solving the Lippmann–Schwinger equation and then used to define energy terms to model the evolution of the dislocations. Grain boundary (GB)–dislocation interactions are studied using the coupled PFDD formulation and by describing GBs as inclusions. GB energy and stiffness tensors are computed from molecular statics simulations, and a newly proposed lattice energy term that is dependent on the GB energy is considered in the calculations. Interaction of a screw dislocation with minimum energy and metastable states of low and high angle ⟨110⟩ symmetric tilt grain boundaries are studied. We show good agreement between predictions from our PFDD formulation and molecular dynamics simulations of grain boundary–dislocation interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Statistical characterization of twin transmission across grain boundaries in magnesium

Here, a detailed statistical analysis of twin transmission (TT) across grain boundaries is performed in rolled, commercial purity magnesium compressed along the rolling direction. EBSD images are acquired from two different cuts: a section containing the rolling (RD) and normal (ND) directions; and a section at 35° to the ND which contains transverse direction (TD). An automated twinning analysis software, METIS, is used to obtain the statistical correlations between deformation twins and other microstructural features by analyzing EBSD microstructures comprising thousands of grains and twins. This detailed statistical analysis reveals that the TT propensity is sensitive to the grain boundary (GB) misorientation angle but not to the GB misorientation axis. Specifically, TT propensity decreases with increasing GB misorientation angle; however, the decreasing trend is not monotonic. Further, the detailed analysis of TT events combining macroscopic Schmid factor and the geometric measures (m’: accounts for the alignment of both twin plane normal and shear directions; m”: accounts for the alignment of only twin shear directions; and m”’: accounts for the alignment of only twin plane normal) helps in understanding and identifying the process of twin-pair formation, i.e., co-nucleation versus transmission, also to identify the role of local stresses at GBs induced by inter-grain interaction versus twinning shear transformation processes. In addition, Bayesian inference is used to draw statistically meaningful conclusions as to the likelihood of transmission given misorientation angles. Lastly, twin chain frequency as a function of chain length is predicted using the probability distribution obtained from the Bayesian inference and compared with the actual data from the EBSD microstructures.

36 MATERIALS SCIENCE↗