Search NASA⌕ Search

SEARCH · Search NASA

Results for “grain boundary diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Investigation of the diffusion behavior of sodium in Cu(In,Ga)Se{sub 2} layers

Sodium diffusion in Cu(In,Ga)Se{sub 2} (CIGS) layers was investigated over a temperature range from 157 °C to 400 °C. The diffusion profiles were measured by secondary ion mass spectrometry. Sodium ions diffused from a sodium fluoride (NaF) layer on the CIGS surface into the CIGS layer. From Na diffusion profiles, the diffusion along grain boundaries could be distinguished from the diffusion into the grain interior. Atom-probe tomography measurements reveal that even at a low temperature of 157 °C bulk diffusion of sodium into CIGS occurs. Based on this data, the slower diffusion coefficient in the volume can be described by the Arrhenius equation D{sub Na}{sup V} = 9.7 × 10{sup −9} exp(−0.36 eV/k{sub B}T) cm{sup 2} s{sup −1} and the fast diffusion along the grain boundaries by D{sub Na}{sup GB} = 6.5 × 10{sup −9} exp(−0.21 eV/k{sub B}T) cm{sup 2} s{sup −1}. Hence, we propose that sodium ions do not only passivate grain boundaries, but also act as dopants in the CIGS bulk.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unusual Thermal Stability of Nano-structured Ferritic alloys

A scientific question vitally important to the materials community is whether there exist self-assembled nanoclusters that are thermodynamically stable at elevated temperatures. Using in-situ neutron scattering, we characterized the structure and thermal stability of a nano-structured ferritic (NSF) alloy. Nanometer sized clusters were found to persist up to ~1400 C, providing direct evidence of a thermodynamically stable alloying state for the nanoclusters. Cluster formation requires the coexistence of Y, Ti, and O without the precipitation of oxide phases. The presence of thermally stable nanoclusters at grain boundaries limits the diffusion of Fe atoms, thereby stabilizing the microstructure of the ferritic matrix at high temperatures. Our experimental results provide physical insights of the dramatically improved high-temperature mechanical properties in NSF alloy and point to a new direction in alloy design.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Mesoscale modeling of intergranular bubble percolation in nuclear fuels

Phase-field simulations are used to examine the variability of intergranular fission gas bubble growth and percolation on uranium dioxide grain boundaries on a mesoscopic length scale. Three key parameters are systematically varied in this study: the contact angle (or dihedral angle) defining the bubble shape, the initial bubble density on the grain boundary plane, and the ratio of the gas diffusivity on the grain boundary versus the grain interiors. The simulation results agree well with previous experimental data obtained for bubble densities and average bubble areas during coalescence events. Interestingly, the rate of percolation is found to be highly variable, with a large dependency on the contact angle and the initial bubble density and little-to-no dependency on the grain boundary gas diffusivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Diffuse interface approach to modeling crystal plasticity with accommodation of grain boundary sliding

In diffuse-interface (phase field) models of polycrystalline solids, the grain boundaries naturally possess a narrow region of finite thickness. A Ginzburg-Landau type kinetic equation for plastic deformation of a solid is derived that combines crystal plasticity and J 2 plasticity. Within such a framework for a polycrystal the grain interior can be defined by crystal plasticity, and the grain boundary region can be assigned J 2 type plasticity. The two are connected smoothly. This enables the modeling framework to accommodate grain boundary sliding (GBS), an important deformation mechanism for creep. The relaxation of elastic modulus of a polycrystalline solid and the power-law creep (both accommodated by GBS) are reported on by 2D and 3D simulations, respectively, and the results are compared to the 2D finite-element simulations of Ghahremani and Crossman-Ashby. A strong grain shape dependence and orientation dependence (for non-equiaxed grains) of the GBS effect are predicted by this model.

36 MATERIALS SCIENCE↗

Disorder-induced transition from grain boundary to bulk dominated ionic diffusion in pyrochlores

In this paper, we use molecular dynamics simulations to investigate the role of grain boundaries (GBs) on ionic diffusion in pyrochlores, as a function of the GB type, chemistry of the compound, and level of cation disorder. We observe that the presence of GBs promotes oxygen transport in ordered and low-disordered systems, as the GBs are found to have a higher concentration of mobile carriers with higher mobilities than in the bulk. Thus, in ordered samples, the ionic diffusion is 2D, localized along the grain boundary. When cation disorder is introduced, bulk carriers begin to contribute to the overall diffusion, while the GB contribution is only slightly enhanced. In highly disordered samples, the diffusive behavior at the GBs is bulk-like, and the two contributions (bulk vs. GB) can no longer be distinguished. There is thus a transition from 2D/GB dominated oxygen diffusivity to 3D/bulk dominated diffusivity versus disorder in pyrochlores. Finally, these results provide new insights into the possibility of using internal interfaces to enhance ionic conductivity in nanostructured complex oxides.

36 MATERIALS SCIENCE↗

Bulk Diffusion of Cl through O Vacancies in α-Cr 2 O 3 : A Density Functional Theory Study

Many metals form passive oxides which are broken or weakened by anionic-induced degradation leading to material failure and anionic diffusion is an important step of this degradation process. The diffusion of anionic species through oxides involves a combination of diffusion along grain boundaries, cracks, and channels, as well as bulk diffusion via point defects which is the focus of this study. Using density functional theory, we study bulk diffusion of Cl through O vacancies in α -Cr 2 O 3 as a model system for passive metal oxides. Little is known about Cl diffusion and bonding characteristics, so we benchmark our work through comparison to numerous studies on O diffusion in α -Cr 2 O 3 to analyze similarities and differences between the O and Cl diffusion in the passivation and degradation process of α -Cr 2 O 3 respectively. Unlike O diffusion, the lowest diffusion barrier for Cl is cross-plane diffusion between two (0001) planes through a vacant cation site but the much shorter in-plane diffusion path within the same coordination polyhedron has 35% higher barrier. This work provides the basis for considering the contributions of Cl bulk-diffusion in the overall diffusion kinetics of Cl through α -Cr 2 O 3 .

Oware Sarfo, Kofi↗

Modeling the Effect of Hydrogen on Tungsten Grain Boundary Properties

The objective of this study is to assess the effect of hydrogen isotopes on mechanical properties of tungsten that are relevant to first-wall applications in a tokamak. We focus on the effects of hydrogen segregation to grain boundaries and its impact on the grain boundary structure and properties. Through molecular dynamics and other atomistic techniques, we are able to make predictions of grain boundary structure and properties related to it, including grain boundary mobility and impurity diffusivity along the grain boundary. The grain boundary structure can change significantly and abruptly as conditions change, including due to heating and radiation damage. These grain boundary phase transformations can have a pronounced effect on mobility and impurity diffusivity, even when no hydrogen is present. How this behavior changes in the presence of hydrogen is not known. The phase may affect the level of hydrogen segregation and hydrogen storage, and the hydrogen may induce significant grain boundary structure changes. Our objective is to predict whether they do. The results inform thermomechanical modeling of tungsten at tokamak conditions.

36 MATERIALS SCIENCE↗

Generation and healing of porosity in high purity copper by high-pressure torsion

Highlights: • Direct characterization of severe plastic deformation induced and healed porosities. • HPT process of disk with pre-fabricated holes reveals healing of porosity. • Ultrafine grains coexisting with shear bands and pores exhibit high stability. • Excess vacancies and pores cause drag effect on the grain boundary motion. • Accelerated vacancy diffusion leads to the generation and growth of pores. - Abstract: Generation and healing of pores in metals under loading or during processing have long been important research topics, and their mechanisms are still debatable. In recent years, unexpected percolating networks of pores acting as ultra-fast diffusion paths were found in ultrafine-grained metals processed by severe plastic deformation. Herein, we conducted a systematic study of the mechanisms of generation and healing of pores in ultrahigh-purity copper (99.9995 wt%) during high-pressure torsion (HPT). In addition to a solid Cu disk, the disk with holes that were drilled before processing, resulting in nominal initial porosity of 4.48%, was processed by HPT. After HPT, the percolating porosities of 0.07 ± 0.01% and 0.04 ± 0.01% were found in the solid disk, and in the disk with pre-fabricated holes, respectively. Thus, higher initial porosity resulted in lower percolating porosity in the HPT-processed disk. Systemic characterization using scanning electron microscopy revealed that in both cases shear bands and ultra-fine grains are located in the regions with induced and healed pores. We discussed the mechanisms of porosity evolution in both cases. In the end, to verify the possibility of pores nucleation and growth by vacancy agglomeration, vacancy diffusivity during HPT processing was estimated. This work sheds a new light on the mechanisms of pores nucleation and evolution during severe plastic deformation.

36 MATERIALS SCIENCE↗

Thermal evolution behavior of carbides and {gamma} Prime precipitates in FGH96 superalloy powder

The characteristics of rapidly solidified FGH96 superalloy powder and the thermal evolution behavior of carbides and {gamma} Prime precipitates within powder particles were investigated. It was observed that the reduction of powder size and the increase of cooling rate had transformed the solidification morphologies of atomized powder from dendrite in major to cellular structure. The secondary dendritic spacing was measured to be 1.02-2.55 {mu}m and the corresponding cooling rates were estimated to be in the range of 1.4 Multiplication-Sign 10{sup 4}-4.7 Multiplication-Sign 10{sup 5} K{center_dot}s{sup -1}. An increase in the annealing temperature had rendered the phase transformation of carbides evolving from non-equilibrium MC Prime carbides to intermediate transition stage of M{sub 23}C{sub 6} carbides, and finally to thermodynamically stable MC carbides. The superfine {gamma} Prime precipitates were formed at the dendritic boundaries of rapidly solidified superalloy powder. The coalescence, growth, and homogenization of {gamma}' precipitates occurred with increasing annealing temperature. With decreasing cooling rate from 650 Degree-Sign C{center_dot}K{sup -1} to 5 Degree-Sign C{center_dot}K{sup -1}, the morphological development of {gamma} Prime precipitates had been shown to proceed from spheroidal to cuboidal and finally to solid state dendrites. Meanwhile, a shift had been observed from dendritic morphology to recrystallized structure between 900 Degree-Sign C and 1050 Degree-Sign C. Moreover, accelerated evolution of carbides and {gamma}' precipitates had been facilitated by the formation of new grain boundaries which provide fast diffusion path for atomic elements. - Highlights: Black-Right-Pointing-Pointer Microstructural characteristic of FGH96 superalloy powder was investigated. Black-Right-Pointing-Pointer The relation between microstructure, particle size, and cooling rate was studied. Black-Right-Pointing-Pointer Thermal evolution behavior of {gamma} Prime and carbides in loose FGH96 powder was studied.

36 MATERIALS SCIENCE↗

Atomic structure and defect energetics of LiCoO{sub 2} grain boundary

Highlights: • We model the sample grain boundary of LiCoO2, one of important Li cathode materials. • Rigid body translation was found the asymmetric GB is more stable than symmetric GB. • The vacancy formation energy of Li and O was estimated with first principles calculations. • This model boundary can help to find a new dopant to improve Li diffusions. - Abstract: An atomic structure of LiCoO{sub 2} model grain boundary, Σ2 [1120](1102), is introduced and grain boundary energies with rigid body translations are investigated systematically to find the most stable interface structures. It is found that the coordinated structures of Co and O in the vicinity of grain boundary are strongly related to grain boundary energy. Examining nonstoichiometry at grain boundary, the defect energetics of Li and O site at grain boundary are estimated. In addition, the effect of grain boundary on Li diffusion is investigated to calculate Li diffusion across grain boundary.

36 MATERIALS SCIENCE↗

Halide Substitution Effects on Lithium-Ion Diffusion in Protonated Antiperovskites

Solid-state electrolytes (SSEs) for all-solid-state lithium-ion batteries are generating intense interest because these batteries can improve the safety and performance compared with devices fabricated with conventional, flammable liquid electrolytes. In these SSEs, it has been suggested that Li + ion diffusion in the grain boundaries is hindered and is a critical determinant of the overall ionic conductivity (σ). However, Li + ion diffusivities in the grain (D G ) and the grain boundary (D GB ) are difficult to determine experimentally, with few techniques capable of distinguishing the individual contributions. Here, we distinguished the D G and D GB for the protonated lithium antiperovskites (pLiAPs) SSEs: Li 2 OHCl, Li 2 OHBr, Li 2 OHF 0.1 Cl 0.9 , Li 2 OHF 0.1 Br 0.9 , and Li 2 OHCl 0.3 7Br 0.63 . The measurements were obtained directly from 7 Li pulsed-field gradient nuclear magnetic resonance (PFG-NMR) at 353 K. The 7 Li PFG-NMR echo profiles were composed of two primary components with additional secondary oscillatory components – the so-called NMR diffraction phenomenon. The length scale separating the two main components corresponds to a diffusion length of ~1.7 µm, which is thought to be the average grain size (by diameter). The short-range (≤ 1.7 µm) diffusion component associated with D G (≈10 -11 m 2 /s) varied minimally with halide substitution, while the long-range (≥ 1.7 µm) component D GB (≈10 -12 to 10 -15 m 2 /s) was highly sensitive to the substitution of halides and closely correlated with s. In addition, from the comparison of the ratio D GB /D G to D t (the Li + ion diffusion coefficient estimated from the rotational correlation time, t c ), it was determined that the contribution of D G to σ is negligible; 0.01 ~ 0.04 in the pLiAPs studied here. Finally, these insights provide fundamental understanding of the halide substitution effects on Li + ion grain versus grain boundary diffusion, and suggest that careful engineering of the grain boundaries at the microscopic level is necessary to achieve high-performance pLiAP SSEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamics study of grain boundary and radiation effects on tritium population and diffusion in zirconium

Tritium population thermodynamics and transport kinetics critically define the tritium storage performance of zirconium tritides that can be used for a variety of nuclear applications including tritium-producing burnable absorber rods. Both thermodynamic and kinetic properties can be sensitive to grain sizes of materials and can be significantly altered by irradiated defects during operation under the reactor environments. A thorough experimental characterization of how these properties evolve under different reactor conditions and different initial grain structures is extremely challenging. Here molecular dynamics simulations are used to investigate tritium population and diffusion in zirconium with and without different planar symmetric and asymmetric tilt grain boundaries and irradiated defects. Here, we found that in addition to trapping tritium, the most significant effect of planar grain boundaries is to increase tritium diffusivity on the boundary plane. Furthermore, fine grain structures are found to mitigate the change of tritium diffusivity due to irradiated point defects as these point defects are likely to migrate to and sink at grain boundaries.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of hydride precipitation on the corrosion kinetics of Zircaloy-4: effect of the nano-structure and grain boundary properties of the zirconium oxide layer on oxygen diffusion flux - 2016-0073

Hydride precipitation at the oxide-metal interface is frequently proposed as causing the corrosion acceleration of Zircaloy-4 at high burnup in pressurized water reactors (PWRs). In order to identify the local mechanisms possibly involved, we studied the nano-structure of oxides formed on massive zirconium hydrides and reference Zircaloy-4 with an innovative grain mapping technique with the use of transmission electron microscopy (TEM). In autoclave PWR-conditions, the presence of a precipitated hydride phase, previously formed by a cathodic charging technique at the surface of Zircaloy-4, clearly increased the corrosion rate, and a higher oxygen diffusion flux along oxide grain boundaries is observed compared with the reference Zircaloy-4. The texture, grain size, and adjacent grain misorientation in the oxide layer were studied in detail along the direction of the oxide growth using an automated crystal orientation mapping technique associated with TEM for both pre-hydrided and reference Zircaloy-4 samples. The texture in the growth direction is similar on pre-hydrided and reference samples, but the grain-to-grain mis-orientations showed differences. Indeed, on the pre-hydrided sample, the misorientation of 90 deg. C with respect to the [001] monoclinic axis is less probable than in the reference oxide, and more mis-orientations of 50-70 deg. C and 120-150 deg. C, corresponding to larger mismatches between neighboring grain boundaries, are observed. A smaller average diameter of the columnar monoclinic grains is also clearly revealed for the oxide grown on the pre-hydrided sample that leads to a larger number of diffusion paths for oxidizing species. These results are discussed and used for simulating oxygen diffusion flux through the polycrystalline microstructure of the oxide layer as a function of the grain size. (authors)

36 MATERIALS SCIENCE↗

Diffusion Coefficients in Liquid and Grain Boundary Predicted by Ab Initio Molecular Dynamics

Molecular dynamics (MD) is a powerful tool to probe the thermodynamic and kinetic properties of solid, glass and liquid phases. In classical molecular dynamics (CMD), empirical models are used to describe the force by considering bond, bend and dihedral angle contributions with parameters fitted to experimental data or first-principles calculations of small clusters. In the ab initio molecular dynamics (AIMD), the forces are calculated on the fly using the first-principles density functional theory as discussed above. In the present work, we use AIMD simulations to follow the random walk of atoms in the liquid state. Based on the mean square displacements (MSD), the diffusion coefficients are calculated from the Einstein equation. Furthermore, we extend this approach to understand the diffusion in grain boundaries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The multiple roles of small-angle tilt grain boundaries in annihilating radiation damage in SiC

Lattice defects generated by radiation damage can diffuse to grain boundaries (GBs) and be annihilated at GBs. However, the precise role of GBs in annihilating the segregated defects remains unclear. Here, we employed multi-scale models to determine how interstitials are annihilated at small-angle tilt GBs (STGBs) in SiC. First of all, we found the pipe diffusion of interstitials in STGBs is slower than bulk diffusion. This is because the increased interatomic distance at dislocation cores raises the migration barrier of interstitial dumbbells. Furthermore, we found both the annihilation of interstitials at jogs and jog nucleation from clusters are diffusion-controlled and can occur under off-stoichiometric interstitial fluxes. Finally, a dislocation line model is developed to predict the role of STGBs in annihilating radiation damage. This model includes defect flux to GBs, pipe diffusion in STGBs, and the interaction of defects with jogs. The model predicts the role of STGBs in annihilating defects depends on the rate of defects segregation to and diffusion along STGBs. STGBs mainly serve as diffusion channel for defects to reach other sinks when defect diffusivity is high at boundaries. As a result, when defect diffusivity is low, most of the defects segregated to STGBs are annihilated by dislocation climb.

36 MATERIALS SCIENCE↗

Fission Product Diffusion in Silicon Carbide: As Revealed by Computer Simulations and Experimental Measurements

The diffusion and release of fission products through silicon carbide in the tri-structural isotropic (TRISO) fuel particles remain unsolved for decades. The underlying mechanism is quite challenging to be determined. To help unveil the mysterious story, the current work applies molecular dynamics method to show the stability of silver, palladium, ruthenium and iodine as an interstitial and their atomic diffusion along coincident site lattice (CSL) boundary, especially ?3 grain boundary (GB). The major finding presents a much faster diffusion along GB than in bulk for all elements considered. The reasonably close estimate to experiments and simulations where available has confirmed the important role of grain boundary diffusion of Ag and Pd in SiC. However, the discrepancy addressed in Ag with measurements from fuel studies suggest a more complicated mechanism, which might be in correlation with high energy grain boundaries or the presence of crack. The subsequent characterization of Ru and I distribution in SiC-PyC-SiC diffusion couples, which have been ion irradiated at 900?C to 10 dpa and 20 dpa, has performed by secondary ion mass spectrometry (SIMS) analysis. The experiment measurements correlate well with the grain boundary diffusion by simulation, which provide further evidences that the grain boundary diffusion cannot be neglected once the fission products are accessible at the grain boundary.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗