Search NASA⌕ Search

SEARCH · Search NASA

Results for “granulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Morphometric studies of heavy ion damage in the brains of rodents

The relative biological effectiveness (RBE) of different heavy ions for the mammalian brain was determined in mice irradiated at 100 days of age with He-4, C-12, Ne-20, Fe-56, Ar-40, or Co-60 gamma photons (with the primary particle LET values ranging from 2 to 650). Brain preparations were examined 16 months later for volume changes in the external plexiform layer (P-zone) of the olfactory bulb and an internal region (G-zone), which consists of the granule cells, the internal plexiform layer, and the mitral cell layer. The result indicate that the volume changes did occur in the olfactory bulb, not only in absolute terms but also when expressed as the ratio of the structures to each other and to the bulb as a whole. While the observed increased neuronal loss in mice receiving 700 cGy of Co-60 support the earlier data from irradiated rabbits, the increases observed in bulbar volumes and in the volume ratios of the P and the G zones measured in the mice given lower doses (320 or 160 cGy of He or C), were not expected.

Kraft, L. M.↗

Sunspot observations from the SOUP instrument on Spacelab 2

A series of white light images obtained by the SOUP instrument on Spacelab 2 of active region 4682 on August 5, 1985 were analyzed in the area containing sunspots. Although the umbra of the spot is underexposed, the film is well exposed in the penumbral regions. These data were digitally processed to remove noise and to separate p-mode oscillations from low velocity material motions. The results of this preliminary investigation include: (1) proper motion measurements of a radial outflow in the photospheric granulation pattern just outside the penumbra; (2) discovery of occasional bright structures (streakers) that appear to be ejected outward from the penumbra; (3) broad dark clouds moving outward in the penumbra in addition to the well known bright penumbral grains moving inward; (4) apparent extensions and contractions of penumbral filaments over the photosphere; and (5) observation of a faint bubble or loop-like structure which seems to expand from two bright penumbral filaments into the photosphere.

Shine, R. A.↗

White light sunspot observations from the Solar Optical Universal Polarimeter on Spacelab-2

The flight of the Solar Optical Universal Polarimeter on Spacelab-2 provided the opportunity for the collection of time sequences of diffraction-limited (0.5 arcsec) solar images with excellent pointing stability (0.003 arcsec) and with freedom from the distortion that plagues ground-based images. A series of white-light images of active region 4682 were obtained on August 5, 1985, and the area containing the sunspot has been analyzed. These data have been digitally processed to remove noise and to separate waves from low-velocity material motions. The results include: (1) proper motion measurements of a radial outflow in the photospheric granulation pattern just outside the penumbra; (2) discovery of occasional bright structures ('streakers') that appear to be ejected outward from the penumbra; (3) broad dark 'clouds' moving outward in the penumbra, in addition to the well-known bright penumbral grains moving inward; (4) apparent extensions and contractions of penumbral filaments over the photosphere; and (5) observation of a faint bubble or looplike structure that seems to expand from two bright penumbral filaments into the photosphere.

Shine, R. A.↗

Stimulated dissipation of magnetic discontinuities and the origin of solar flares

It is proposed that the principal cause of the confined solar flare is the dissipation of magnetic energy at the many small-scale pre-existing tangential discontinuities in the local bipolar magnetic field. The discontinuities are a consequence of the continuous shuffling and intermixing of the footpoints of the bipolar field by the turbulent photospheric granules. The X-ray corona within the bipolar field is presumed to be a consequence of the continuing dissipation by reconnection at these discontinuities. A flare results when static deformation and/or internal agitation of the field stimulates the onset of rapid reconnection at the many small internal discontinuities. The discontinuities are partially exhausted by the flare, so that the post-flare X-ray emission of that particular loop is substantially below the pre-flare level for a period of some hours while the discontinuities are being rejuvenated.

Parker, E. N.↗

A study of cell electrophoresis as a means of purifying growth hormone secreting cells

Growth hormone secreting cells of the rat anterior pituitary are heavily laden with granules of growth hormone and can be partialy purified on the basis of their resulting high density. Two methods of preparative cell electrophoresis were investigated as methods of enhancing the purification of growth hormone producing cells: density gradient electrophoresis and continuous flow electrophoresis. Both methods provided a two- to four-fold enrichment in growth hormone production per cell relative to that achieved by previous methods. Measurements of electrophoretic mobilities by two analytical methods, microscopic electrophoresis and laser-tracking electrophoresis, revealed very little distinction between unpurified anterior pituitary cell suspensions and somatotroph-enriched cell suspensions. Predictions calculated on the basis of analytical electrophoretic data are consistent with the hypothesis that sedimentation plays a significant role in both types of preparative electrophoresis and the electrophoretic mobility of the growth hormone secreting subpopulation of cells remains unknown.

Plank, Lindsay D.↗

Heating of solar coronal loops by resonant absorption of Alfven waves

Numerical calculations governing the efficiency of coronal loop heating by the resonant absorption of shear Alfven waves are reported. The loop structure is modeled by a class of axisymmetric force-free equilibria of a long straight cylinder, approximating a large aspect ratio loop. For a range of parameters characterizing the evolution of solar coronal loops, the absorption bandwidth falls in the frequency range of the photospheric motions due to granulation and p-modes. Resonant Alfven wave absorption is thus a viable mechanism for coronal loop heating.

Grossmann, William↗

Petrology of brecciated ferroan noritic anorthosite 67215

A petrologic study of breccia 67215 is presented, showing that the rock has the bulk composition of a ferroan noritic anorthosite and is a polymict breccia containing several lithic clast types within a crushed, cataclastic matrix. The dominant lithic clasts contained in breccia 67215 are found to be igneous and metamorphic low- and high- Ca pyroxenes and olivine. Other clasts include granulated and sheared clasts, coarse-grained anorthosite with relatively Fe-rich augite, aphanitic, feldspathic microporphyritic melt breccias, and an impact-melt rock with strongly zoned relatively Mg-rich pyroxene. It is concluded that this rock type is relatively common in the highlands regolith excavated by the North Ray Crater.

Mcgee, James J.↗

Observed variability of the solar luminosity

Data on solar luminosity variations are compiled in graphs and analyzed, with a focus on the SMM satellite bolometric measurements and other observations made since 1983. Consideration is given to total irradiance measurements in integrated light; emission-line variability in the visible, UV, and IR; mechanisms contributing to the solar variability (sunspots, faculae, rotation, oscillations, granulation, and active networks); the role of the solar magnetic cycle; and other observable parameters indicating variability. Also discussed are the effects of solar variations on the earth climate and the implications of the observations for theoretical models of convective-envelope processes (thermal diffusion near the surface and magnetic pressure in the interior).

Hudson, H. S.↗

Ferroan anorthosite from lunar breccia 64435 - Implications for the origin and history of lunar ferroan anorthosites

A composite clast of ferroan-anorthosite-suite rocks from lunar breccia 64435 is shown to contain three lithologies. The results suggest that the structures of the 64435 composite clast were produced in an early deformation that consisted of extensive granulation followed by pervasive recrystallization, and that some granulitic breccias are nearly monomict. The REE concentrations in the coarse-grained troctolitic anorthosite are explained in terms of mass balance among the equilibrated phases.

James, O. B.↗

Formation of Fourier phase shifts in the solar Ni I 6768 A line

A formalism is developed to understand better how Doppler shifts of spectrum lines as inferred from phase shifts in the Fourier transforms of line profiles are related to the underlying velocity structures which they are intended to measure. With a standard model atmosphere and a simplified, quasi-LTE treatment of line formation, the formalism is applied to the Ni I 6768 A line, which has been selected for use with a network of imaging interferometers under development by the Global Oscillations Network Group for research in helioseismology. Fourier phase shifts are found to be a remarkably linear measure of velocity even in the presence of gradients and unresolved lateral variations in the assumed velocity field. An assumed outward increase in amplitude of a model oscillatory velocity is noticeably reflected in the center-to-limb behavior of the simulated velocity measure, and a sample model of solar granulation is found to have a strong influence on the formation of the Fourier phase.

Jones, Harrison P.↗

Plastic superconductor bearings any size, any shape, 77 k and up

Friction free bearings at 77 k or higher are possible using the high T(sub c) copper oxide ceramic superconductors. The conventional method for making such bearings is to use a sintered ceramic monolith. This puts great restraints on size, shape and postforming machining. The material is hard and abrasive. It's possible to grind up ceramic superconductors and suspend the granules in a suitable matrix. Mechanical properties improve and are largely dependent on the binder. The Meissner effect is confined to individual grains containing electron vortices. Tracks, rails, levitation areas and bearings can be made this way with conventional plastic molding and extruding machines or by painting. The parts are easily machined. The sacrifice is in bulk electrical conductivity. A percolating wick feel for LN2 can be used to cool remote superconductors and large areas quite effectively. A hollow spheroid or cylinder of superconductor material can be molded with the internal surfaces shielded by the Meissner effect. It might be thought of as the dc magnetic analogue of the Faraday cage and the inside can be called the Meissner space. It's selective. The ac fields are transmitted with minor attenuation. Particle size and distribution have a profound effect on final magnetic and electrical characteristics.

Reick, Franklin G.↗

Ignitability test method

To overcome serious weaknesses in determining the performance of initiating devices, a novel 'ignitability test method', representing actual design interfaces and ignition materials, has been developed. Ignition device output consists of heat, light, gas an burning particles. Past research methods have evaluated these parameters individually. This paper describes the development and demonstration of an ignitability test method combining all these parameters, and the quantitative assessment of the ignition performance of two widely used percussion primers, the M42C1-PA101 and the M42C2-793. The ignition materials used for this evaluation were several powder, granule and pellet sizes of black powder and boron-potassium nitrate. This test method should be useful for performance evaluation of all initiator types, quality assurance, evaluation of ignition interfaces, and service life studies of initiators and ignition materials.

Bement, Laurence J.↗

How deep can one see into the sun?

Conventional wisdom dictates that the 1.642-micron H(-) opacity minimum is the best window to the depths of the solar photosphere. However, the violet continuum near 0.4 micron exhibits a larger intensity response to small thermal perturbations at depth, and thus might offer an even better view of the subsurface roots of granulation cells and magnetic flux tubes.

Ayres, Thomas R.↗

Do mesogranules exist?

The application of spatial and temporal averaging techniques to several long sequences of Dopplergrams obtained at the solar disk center and near the limb confirmed the persistent supergranule velocity pattern. After excluding the 5-min oscillation and supergranule velocity fields from the disk center Doppler data, it is found that the velocity structure shows a typical scale of 7 Mm, consistent with the scale of mesogranules found by November, Toomre, and Gebbie (1981) and November et al. (1982). However, this velocity pattern does not show properties of the cellular convection. It is proposed that the mesogranule velocity structure found by November et al. might be the uncorrected part of the 5-min oscillations and granule velocity.

Wang, Haimin↗

Cosmos 1887 - Science overview

Twenty two groups of U.S. investigators participated in joint studies of ten male rats flown on the Cosmos 1887 biosatellite. A summary of these studies embracing skeletal muscle, bone, endocrine, neural, intestinal, metabolic, immunology, cardiac, and gonadal investigations is presented. Three general objectives of the rat experiments are outlined - verification of previous observations of the biological responses to microgravity; clarification of the effects of microgravity on both the tissues investigated and the measurements performed; and relation of biological responses to flight duration. It is concluded that the first objective is met fully and the second with a varying degree of success. The confounding effects of overshooting the designated landing site and delayed recovery of the animals largely precluded meeting the last objective. It is also noted that investigations were performed for the first time on brain and spinal cord enzymes, a neurotransmitter, transmitter receptors, hypothalamic regulatory factors, pineal metabolites, atrial granules, liver histology, and jejunal mitotic rate in spaceflight animals.

Grindeland, R. E.↗

Real-Time MENTAT programming language and architecture

Real-time MENTAT, a programming environment designed to simplify the task of programming real-time applications in distributed and parallel environments, is described. It is based on the same data-driven computation model and object-oriented programming paradigm as MENTAT. It provides an easy-to-use mechanism to exploit parallelism, language constructs for the expression and enforcement of timing constraints, and run-time support for scheduling and exciting real-time programs. The real-time MENTAT programming language is an extended C++. The extensions are added to facilitate automatic detection of data flow and generation of data flow graphs, to express the timing constraints of individual granules of computation, and to provide scheduling directives for the runtime system. A high-level view of the real-time MENTAT system architecture and programming language constructs is provided.

Grimshaw, Andrew S.↗

Irradiance Variability of the Sun

Direct measurements of the solar constant--the total irradiance at mean Sun-Earth distance--during the last ten years from satellites show variations over time scales from minutes to years and decades. At high frequencies the spectral power is determined by granulation, super- and mesogranulation. In the 5-minute range, moreover, it is dominated by power from the solar p-mode oscillations. Their power and frequencies change with time, yielding information about changes in the convection zone. During periods of several hours, the power is steadily increasing and may be partly due to solar gravity modes. The most important variance is in the range from days to several months and is related to the photospheric features of solar activity, decrease of the irradiance during the appearance of sunspots, and increasing by faculae and the magnetic network. Long-term modulation by the 11-year activity cycle are observed conclusively with the irradiance being higher during solar maximum. All these variations can be explained--at least qualitatively--by their manifestation on the photosphere. For the long-term changes, the simultaneous changes of the frequencies of solar p-mode oscillations suggest a more global origin of the variations. Indeed, it seems that the observed irradiance modulation is a true luminosity change with the magnetic cycle of the Sun.

Froehlich, Claus↗

Near-Earth asteroids: Metals occurrence, extraction, and fabrication

Near-earth asteroids occur in three principle types of orbits: Amor, Apollo, and Aten. Amor asteroids make relatively close (within 0.3 AU) approaches to the earth's orbit, but do not actually overlap it. Apollo asteroids spend most of their time outside the earth's orbital path, but at some point of close approach to the sun, they cross the orbit of the earth. Aten asteroids are those whose orbits remain inside the earth's path for the majority of their time, with semi-major axes less than 0.1 AU. Near-earth orbit asteroids include: stones, stony-irons, irons, carbonaceous, and super-carbonaceous. Metals within these asteroids include: iron, nickel, cobalt, the platinum group, aluminum, titanium, and others. Focus is on the extraction of ferrous and platinum group metals from the stony-iron asteroids, and the iron asteroids. Extraction of the metal fraction can be accomplished through the use of tunnel-boring-machines (TBM) in the case of the stony-irons. The metals within the story-iron asteroids occur as dispersed granules, which can be separated from the stony fraction through magnetic and gaseous digestion separation techniques. The metal asteroids are processes by drilling and gaseous digestion or by gaseous digestion alone. Manufacturing of structures, housings, framing networks, pressure vessels, mirrors, and other products is accomplished through the chemical vapor deposition (CVD) of metal coating on advanced composites and on the inside of contour-defining inflatables (CDI). Metal coatings on advanced composites provide: resistance to degradation in the hostile environments of space; superior optical properties; superior heat dissipation; service as wear coatings; and service as evidential coatings. Metal coatings on the inside of CDI produce metal load-bearing products. Fibers such as graphite, kevlar, glass, ceramic, metal, etc., can be incorporated in the metal coatings on the inside of CDI producing metal matrix products which exhibit high strength and resist crack propagation.

Westfall, Richard↗